Related
I find this solution for running ActiveSync connected thru BT via one click. I tried it on my MDA Compact and it works.
Hope it helps.
http://www.mtekk.com.au/Forums/tabid/56/postid/14926/view/topic/Default.aspx
On the Pocket PC...
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
e. Go into the Start Menu folder (within Windows folder)
f. Right click, paste shortcut - rename to something like ActiveSync Direct
Back on the Pocket PC
5. Gracefully disconnect ActiveSync.
6. Start / Settings / Buttons
7. Choose Button 4
8. Set the button assignment as ActiveSync Direct (or whatever you called it above) and click OK
9. Reset your Pocket PC and wait about 15 seconds for everything to get loaded (esp. Bluetooth which takes a little while).
10. Press the top left side button. Voila! Easy!
If you get the ActiveSync - "Port Not Available" message, it just means that Bluetooth hasn't loaded yet. Tap OK, check that Bluetooth is activated and if so, try again.
Thanks for the post. Ive been having trouble getting this to work however.
1. ActiveSync / Tools / Options... / Options... (yes options twice)
2. "When cradled Enable PC sync using this connection" 'Bluetooth
3. Startup an ActiveSync connection as you normally would...
4. Now setup a shortcut to the program "windows\repllog.exe" into the Start menu. To do this
a. open up Explore in ActiveSync
b. Go into My Pocket PC
c. Go into Windows folder
d. Find repllog.exe and right click and select copy
Click to expand...
Click to collapse
Im using WM5, and firstly i dont have the option..option menu and secondly when i try to paste repllog it tells me that the file is copy protected or something like that.
Any ideas???
Help appreciated.....
Try to use Resco File Explorer instead of M$ Explorer. When you 'right click' on Windows/repllog.exe, there is 'Send To...' -> 'Start Menu as Shortcut' option in menu.
activesync has only com1!!!!!
hello pda masters!.i try to activesync my ipaq-2490, with usb,can sync.when i try to change com to sync by bluetooth, activesync has only com1, to choose.i have soft reset, my ipaq, (Xmany times), uninstall reinstall activesync 4.01, 4.02 (Xmany times).i eraze registry anfd reinstall, nothing.have you any idea? in the past i could sync by bluetooth, because activesync had com1,com2,com......., now has only com1.please help
sorry if i post in wrong thread, but i am new, and forgive my poor english, (i am from greece)
The best
http://forum.xda-developers.com/viewtopic.php?t=49136
IMHO
help with activesync only com1
every time i install bluetooth usb stack, it uses new com79, com80, now and i cannot sync over bt like i did before.
How can i delete those comports?in device manager under advanced in com1, tells me that from com2-com80 are in used.?????
Any idea, thanks
remove your stack from PC, then delete all com ports except 1 & 2 , use buttons windows + break & install stack again!
in properties of each ports set different com for example com1 , ignore errors , delete free changed one! do so with each wrong port
THANKS A LOT! PROBLEM WITH COM79,COM80,COM81......FIXED
thanx rustoss, you are BIG! i dont unplug usb stack even.....i just ignore all notifications and change my only COM1, to com5, and thats it!.i can activesync by bt again.thanks again :lol: :lol:
Hi Guys,
I'm really stumped here, i have been on the www for days trying to findout how to get my Atom to work as a BT Modem for my PC. I keep going round in circles trying to locate the file USBMDM.INF but can not find this file anywhere. I have followed links to advise that i need to start "Modem Link" from program files but then i need the USBMDM.INF file to go to the next step....at least i think i do???......... can anyone help me to set up my Atom as a modem for my Laptop PC??
Thanx for any assistance that you can give.
instruction:
XdaAtom_Wireless.zip
Without pictures the instruction look like follows:
XdaAtom – Wireless Modem via Bluetooth
a.) Pairing Devices
1. To turn on Bluetooth on your device. Tap Start --> Settings --> Connection --> Bluetooth
2. Check on "Turn on Bluetooth" and "Make this device discoverable to other devices"
3. Tap on "Devices" and tap on "New Partnership..." to search for bluetooth devices.
4. Select your computer name and tap on "Next" to pair the devices.
5. Key in Passkey (for example "0000") and tap "Next" to continue.
6. On your computer, key in the same Passkey and click "OK".
7. On your device, check on "Serial Port" and click "Finish"
8. A partnership will be created on your device. Tap "OK".
b.) Disable incoming beam files
1. on your device, tap on Start --> Settings --> Connections --> Beam. Untick "Receive all incoming beams" and tap "OK".
c.) Disable Microsoft Active sync on your computer.
1. On your PC, launch Microsoft Activesync. Click on File Connection Setting
2. Uncheck “Allow USB Connections” and “Allow connections to one of the following” then Click “OK”
3. Microsoft Activesync is disabled.
d.) Configuring Modem
1. On your computer, click on Start --> Control Panel --> Phone and Modem Options
2. Click on "Modem" tab and select "Bluetooth DUN Modem" then click on "Properties".
3. Select “Advanced” tab and type in Extra initialization commands and Click “OK”.
** Depending on which service you want to create a connection to, you have to use the appropriate APN name and replace the “internet”. You may want to refer to your operator or its web site for the APN names.
e.) Create a Dial-up Connection
1. on your computer, Start Control Panel Network Connection
2. Click on “Create a new connection”.
3. Open the "New Connection Wizard" in XP and select “Connect to Internet” and click “Next”.
4. Choose “Set up my connection manually” and click “Next”.
5. Select “Connect using a dial-up modem” and click “Next”.
6. Tick on “Bluetooth DUN Modem” only and click “Next”.
7. Type in any name for your connection and click “Next”.
8. Type in Phone Number “*99#” and click “Next”
9. Type in Username and Password required (if any) and click “Next” then “Finish”.
10. Press “Dial” to connect to your modem connection.
11. If everything worked fine, you should able to get connected.
** You may want to refer to your computer’s Bluetooth software manufacturer for more information regarding to the dialing method.
f.) Disconnect Wireless Modem
1. To disconnect the connection, right-click on the dial-up connection and click on "Disconnect"
Thanx for the detailed set-up instructions Kropotov!
I follwed to the letter but at this time I'm still unable to get it all to work. When i enable the PC dial up connection it activeate the Atom cos the back light come on abd the BT symbol in the PC system tray changes colour. However it does not want to get past this stage and no signs of the GPRS sybol coming on the PPC...........I know my GPRS APN is "NET" with user name being the operator and the password being "WAP" but still nothing working. I just don't know why it should be so hard to establish a link via BT or USB cable. It was easier to do on my old Nokia 6030 about 5 years ago than it is on my Atom!
Regards
Chris.
try to connect to GPRS using USB connection...
Can you go to internet from your Atom?
How do I know which COM port the ActiveSync is using......would it be COM1 by default? When i try to set up a DUN modem the only ports that i can see are all Bluetooth ports that i have created, I do nt get the choice for COM1.
I also found some instructions from O2 on how to set up an Xda II to act as a modem, in these instructions you set up a new standard modem on the PC, disable Activesync on the PC then deactivate "Receive all beams" on the PPC and then activate "Modem Link" on the PPC. Then when you plug in the PDA to the PC via USB cable the computer will detect new hard ware and try to install a drive, I have not been able to locate the required driver o the internet so can not get any further with this method. The driver is on the OEM CD supplied with the device and as I'm away from home i can not check if i have the driver on the CD that came with the Atom. The driver i called "HTC USB Modem".
angusc :wink:
http://www.rapidshare.ru/27257
Kropotov,
I can't figure out how to download the file from this site, sorry to be such a pain.
http://dl.rapidshare.ru/27257/99530/USBMDM.INF
Thanx again for your continued support and assistance but that link is not working for me at this time, i will try it again later to hopefully get to that file!!
give me your mail. I will send you
kropotov,
Thx for the file, i installed a new modem on my PC and then activated the "modem link" on my PPC and installed the driver when prompted, but alas still not working. I think it is to do with the assigned COM port for the modem on the PC, I can only seem to choosE COM 4, 9, 13, 14, 15 when installing the modem to PC. I would think that the Atom would be com port 1-3 as it is connected to one of my PC USB ports......
Will keep playing and let you know if I manage to get it to work......Thanx for all your help.
Request Modem Driver for O2 XDA Atom
Dear all, Please anyone send me the Bluetooth modem driver, I just lost my CD, also the USB modem driver for O2 XDA Atom thanks alot
Cipto
O2 Atom
Request for BT modem driver
Hi, I'm looking for BT modem driver (.inf) to install in PC.
I'm using O2 Atom and my PC is Dell Latitude D420.
Thanks in advance for any help.
XDA Atom usb driver
Hi,
I'd like to know if somebody can send for me the drivers for my XDA Atom, because I don't have the original CD.
Thanx
Alvaro
xda atom driver
Hi,
I just found the correct drive for XDA Atom in the internet:
http://files.pdamobiz.com/Tools/atom_usbmdm.rar
I hope it help....
Alvaro
Is it possibe to use the usb/bluetooth modem to receive incoming connections?
Thanks.
Jebril can you pls send the same driver for my h/s ....Thanx.
Serial Port not appearing while teaming
Hi
I followed the following steps:
1. To turn on Bluetooth on your device. Tap Start --> Settings --> Connection --> Bluetooth
2. Check on "Turn on Bluetooth" and "Make this device discoverable to other devices"
3. Tap on "Devices" and tap on "New Partnership..." to search for bluetooth devices.
4. Select your computer name and tap on "Next" to pair the devices.
5. Key in Passkey (for example "0000") and tap "Next" to continue.
6. On your computer, key in the same Passkey and click "OK".
7. On your device, check on "Serial Port" and click "Finish"
My O2 Atom is not showing any serial port to select
any idea?
Regards
kropotov said:
instruction:
XdaAtom_Wireless.zip
Click to expand...
Click to collapse
Good work mate, but still wait for the laptop to come
Has someone connected a laptop to internet using TyNT?
I cant. I did it with my htc universal using the wireless modem or internet sharing (aku 3.2).
But TynT hasnt "internet sharing utility" and my laptop doesnt recognize it as modem. Some idea?
thanks
Do you have under programs wireless modems? If you launch this and got to usb then start; your laptop/pc will pnp and request instalation of drivers, I think the drivers and software are on the wiki. Also remember to use the correct APN name i.e. for T-mob uk it is general.t-mobile.uk
cool this worked fine for me, i just needed to change the apn settings from "internet" to "general.t-mobile.uk"
Check the Hermes FAQ: there's a section about using TyTN as a laptop modem...
http://wiki.xda-developers.com/index.php?pagename=Hermes_FAQs
Bye
It worked when i used my Univesal. But now, when a click "start" in wireless modem app and plug it to the laptop nothing happens.....No hardware detected......
im usin orange spv m500. when i connect the phone to my laptop using USB cable, nothin happens. no hardware detected. it doesnt prompt to install any driver.. pls help!! :!:
It works fine for me with a BlueTooth connection. I don't think anybody has it working over USB.
It works fine using a Dial-up Connection from Windows.... you don't need to activate the Wireless Modem on the TyTN... in fact doing so will prevent it from working...
Hi.Yes, it works setting a dial-up connection with bluetooth but i want to use the wireless modem usb because the dial-up system closes the connection if you receive a phone call.......
I miss the utility "internet sharing" from Universal Aku 3.2. I hope it is present in next TyNT rom....
i have found the solution
go to start > programs > wireless modem
select connection type USB
tap Start
then connect ur mobile device to ur laptop or pc. it will detect new hardware n will prompt to install driver. u can download the driver and utility from here
Code:
http://dl1.uploadgalaxy.com/files/e52d58daacf8/USB_Modem.zip.html
when I plug the tynt in my pc or my laptop (with the wireless app running on usb) nothing happens....
mine is a spv m500. OS is windows mobile 2003. it detects new hardware only when u plug in after pressing the start button
Yes. I have Imate pocket pc and Imate jasjar and it works in than way. But it doesnt work with TyNT (for me)
shafiu said:
i have found the solution
go to start > programs > wireless modem
select connection type USB
tap Start
then connect ur mobile device to ur laptop or pc. it will detect new hardware n will prompt to install driver. u can download the driver and utility from here
Code:
http://dl1.uploadgalaxy.com/files/e52d58daacf8/USB_Modem.zip.html
Click to expand...
Click to collapse
Hi I used have functional connection from my laptop to TyTN using USB cable. but since last week it started telling me that there is some remote access error (I have tried different cable to check whether it is broken or not ... didn't help)
so I removed the HTC USB modem .. so I could re-do it .. since then I can't install it again .. it evern doesn't detect the TyTN so I could process it using wizard mode .. and when I want to do it manually it doesn't work as well
can somebody please help?
thx in advance
dherrero said:
when I plug the tynt in my pc or my laptop (with the wireless app running on usb) nothing happens....
Click to expand...
Click to collapse
Yup, exactly the same here, any ideas anyone?
Thanks.
M.
have you
1. disabled USB/Serial connections in ActiveSync and
2. started the "Wireless Modem" application?
not helping .. I am starting to think about HR .... BT connection is toooo slow :/
EDIT .. I have used HR ... created new connection .. tested it (it worked) and used back-up .. now it doesn't work again and keep teeling me about some access error 680
I am going for finall HR I am affraid ...
a BT modem connection will at best have less than half the speed of a wired USB one... (see my previous benchmark thread).
goestoeleven said:
have you
1. disabled USB/Serial connections in ActiveSync and
2. started the "Wireless Modem" application?
Click to expand...
Click to collapse
Yes i have do so but nothing append pc dont want see the tynt.
I have try 3 part program like mobile stream usb modem...
But nothing work for me..
I have give a look to wiki faq but nothing this url:
thread 1:http://forum.xda-developers.com/viewtopic.php?t=59586 and
Thread 2; http://forum.xda-developers.com/viewtopic.php?t=57841 are simply death link...
Have somebody an idea???
thx
works through usb no problem
Part I: Install USB Modem Driver
1. Make sure that your PocketPC does not connect with your PC
2. Disable ActiveSync USB port connect on your PC
3. Tap device Start->Programs->Wireless Modem -> Tools->Options, and input your APN of your service provider. Then tap “OK”
4. Make sure the “Connection Type” selected ”USB” , Now press the button “Start” , and connect your device with PC through USB cable
5. On your desktop PC will found a new hardware
6. Select “No, not this time” and press “Next”
7. Select “Install from a list or specific location (Advanced)” and press “Next”
8. Specify USB Modem driver(USBMDM.inf) path and press “Next”
9. Press “Continue Anyway” to continue install USB Modem driver
10. Press “Finish” to finish driver install
11. After installation you have a new USB Modem called “HTC USB Modem” in Control Panel->Phone and Modem Options
Part II: Create New USB Dialer
1. In “Control panel”, select “Network Connections”
2. Click “Create a new connection”
3. Press “Next” to start Dialer create process
4. Select “Connect to the Internet” then press “Next”
5. Select “Set up my connection manually” then press “Next”
6. Select “Connect using a dial-up modem” then press “Next”
7. Select your “USB Modem” then press “Next”
8. Input modem ISP Name, like “ABC”, then press “Next”
9. Input dialup number “*99#” then press “Next”
10. Select “Anyone’s use” or “My use only” then press “Next”
11. Input “User Name” and “Password”, default is empty, then press “Next”
12. Check/Uncheck “Add a shortcut to this connection to my desktop” then press “Finish”
13. After setup completed, you can see a new dialer in “Network Connections”
14. Execute your new USB Modem Dialer(ABC)
15. Press “Dial” to dialup to network
works 100% tried it fine. document was taken off somewhere i think on the wiki so no thanks to me. Just to confirm via usb works fine and it is quick
sk8funk said:
Part I: Install USB Modem Driver
1. Make sure that your PocketPC does not connect with your PC
2. Disable ActiveSync USB port connect on your PC
3. Tap device Start->Programs->Wireless Modem -> Tools->Options, and input your APN of your service provider. Then tap “OK”
4. Make sure the “Connection Type” selected ”USB” , Now press the button “Start” , and connect your device with PC through USB cable
5. On your desktop PC will found a new hardware
6. Select “No, not this time” and press “Next”
7. Select “Install from a list or specific location (Advanced)” and press “Next”
8. Specify USB Modem driver(USBMDM.inf) path and press “Next”
9. Press “Continue Anyway” to continue install USB Modem driver
10. Press “Finish” to finish driver install
11. After installation you have a new USB Modem called “HTC USB Modem” in Control Panel->Phone and Modem Options
Part II: Create New USB Dialer
1. In “Control panel”, select “Network Connections”
2. Click “Create a new connection”
3. Press “Next” to start Dialer create process
4. Select “Connect to the Internet” then press “Next”
5. Select “Set up my connection manually” then press “Next”
6. Select “Connect using a dial-up modem” then press “Next”
7. Select your “USB Modem” then press “Next”
8. Input modem ISP Name, like “ABC”, then press “Next”
9. Input dialup number “*99#” then press “Next”
10. Select “Anyone’s use” or “My use only” then press “Next”
11. Input “User Name” and “Password”, default is empty, then press “Next”
12. Check/Uncheck “Add a shortcut to this connection to my desktop” then press “Finish”
13. After setup completed, you can see a new dialer in “Network Connections”
14. Execute your new USB Modem Dialer(ABC)
15. Press “Dial” to dialup to network
works 100% tried it fine. document was taken off somewhere i think on the wiki so no thanks to me. Just to confirm via usb works fine and it is quick
Click to expand...
Click to collapse
Hi, read/found it somewhere in the wiki, and it works as you described.
Only thing is always start the modem first before connecting to the PC. Works everytime for me:
Connected speed: 230.4 kpbs (good enough for me as I'm on EDGE connection)
Regards,
Hello, I have a spv m2000.
I try to instal windows mobile 6.1 on spv m2000, but i can't connect BA to pc in Bootloader mode with windows vista. I try all metods that are describle in ( http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardUpgrade4_Vista ), but i haven't success.
But now, when i turn on device, i see that i loose many programs (PVPlayer, Album, WESTTEK Native Office Viewers and Orange configurations).
how can I return to these programs?
sorry my bad english, but english isn't my motherlanguage.
regards
Well
I dont have vista but in bootloader you dont need to sync it you just need the drivers... maybe your WMDC is not updated... check it out...
I have WMDC version 6.1.6965 and I install drivers for my vista 32bits
can you xplain it?
So... can you xplain where did you get stucked?
maybe the error that the RUU shows you?
or what else... has happening to your device please?
Edit: Xplain all detail please... to see if anybody can help here...
or you just need a XP pc... is suggested to everybody here.
whell, i follow step by step the tutorial.
1. I install xda-developers_Unlocker.CAB
2. Then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock".
3. Do a soft reset.
4. Once your BA is restarted, locate the Repart_DOC.exe file with your filemanager and start it.
5. Set the size of Extended ROM to 128 kb (which is already the default).
7. I press "format now!"
8. Soft reset your BA.
after I download vista 32 bits (driver)
9. Extract the contents to a folder on your desktop, to "AS_DRIVERS" folder.
10. I put your device into Bootloader mode by pressing and hold the "Power" & "Record" buttons, and then press the Reset Button.
11. Connect the phone to the sync cable/cradle USB;
12. Now navigate into the WMDC (Start -> All Programs -> Windows Mobile Device Center)
* Click on the "connection settings" menu icon
* In the connection settings menu uncheck "allow USB connections" then press OK.
* Now exit the WMDC and return to the desktop
13. Go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
* Scroll down the list and make sure these services are present:
* Windows Mobile-based connectivity
* Windows Mobile 2003-based connectivity
* If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK.
* Return back to the desktop again
14. Go into the start menu and type "Device Manager" then run, this will take you into the device manager.
* Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync".
* This will bring up the properties of the currently connected device.
* Go to the "Driver" tab and click "Update Driver".
* Click "Browse My Computer for Driver Software".
* Select "Let me pick from a list...."
* Click the "Have Disk" button.
* Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
*
Now select your file
o Vista 32bit users select the file "wceusbsh.inf"
o Vista 64bit users select the file "wceusbshx64.inf"
* Then click Open.
* Click next and the driver will be installed (wait a moment).
* Press close and escape back to the desktop now.
---» In this step that i have problems
9. Now we must stop the WMDC process
* Start the task manager by pressing Ctrl+Shift+Escape.
* Click the WMDC line and click "End Process". In the confirmation window, again press End Process.
* Now re-enter the WMDC and re-enable USB connections (click connection settings and check the box "enable USB connections").
my BA doesn't appears in WMDC, i don't have any conection with BA in bootloader mode
I thinks that problem is in extRom.
The BA cannot instalt the extRom program
@anybody: please activate "Bluetooth HCI-Snoop-Protocol" in developer options and tell me if you have the file /sdcard/btsnoop_hci.log on your phone.
If yes => please tell me which rom you are using.
i am on xXx 9.6
the file is not existing. I tried to edit the /etc/bluetooth/bt_stack.conf manually. still no success. I need to debug the bluetooth data between my smartwatch (zeTime) and my phone.
It will be saved in /sdcard/oem_log/ once you enable logging in oemlogkit.
Dialer -> input *#800#->get wireless log->get bluetooth log.
Got the log. Can you recommend a tool to read it? Something Like wireshark for Android?
I am new to this. I am a java Developer, but new to Bluetooth Debugging
You can analyze it with wireshark, there's also a HCI debugger app in the play store.
Is anybody else having problems with the btsnoop file not being generated?
I've had Bluetooth problems ever since updating to OxygenOS 5.1.1 (https://forums.oneplus.com/threads/constant-bluetooth-problems-after-updating-to-5-1-1.831111/), and I'm still having the same problem after doing clean flash to 5.1.3.
OnePlus contact me about this and gave me the instructions to generate the log files to email to them, I followed those instructions and it generated different log files in the oem_log directory, except for the btsnoop file itself, and they were at a loss as well as to why the btsnoop file wasn't being generated.
Here's the instructions they gave me, I followed it to a "T" and tried different variations hoping one of them would work, but no luck.
Input *#800# from dialing interface, enter "oneplus logkit", delete history log
Click "advanced" > "save log type" > enable all options, then click OK
Tap “move log path to built-in SD card” and then click "save log", when it informs you whether to reboot, click “cancel” > enter "Wireless connection", enable "Bluetooth air bag switch" and “Bluetooth protocol stack LOG switch”
Go back, click "get QXDM Log, choose “bt related”, roll down, click "open device log"
Go to: settings>Developer options> Click Enable Bluetooth HCI snoop log to make sure this function has been enabled. If it is enable already, please enable again.
(Important) Then turn Bluetooth on, reproduce the issue and take a screenshot to record the time
Wait for several minutes (better above 10 minutes), tap "save log" and click “move log path to built-in SD card” again to stop it, enter QXDM Log and choose “close device log”