Good afternoon.
I have an lg g6 h870s brick. Trying to update it to android 9, I got stuck and did not get out of the recovery mode. Following a tutorial from the xda forum I put a wrong kdz file of a g6 h870, the phone booted but the sim card did not recognize me. Try a new update but I'm running out of brick again. Now I try to update it with lg up and starting with uppercut and it recognizes the tlf as a g6 h870 and when loading a kdz from an h870s it gives me an error saying that the dll files do not match, or something like that,
I tried to send it to Lg but when it was bought in amazon they tell me that it is from the Emirates and they do not give me support and taking advantage of the quarantine if you made me a mania I would greatly appreciate it since I am a little lost in this.
Thank you very much and I encourage you all in these days.
Sorry for my English I am Spanish
Related
I can get into download mode, but have a secure boot error and cant use ADB or fastboot. I've been reading every thread I can find.
I tried the LG tool, it never downloads the firmware, just hangs at 12%. Tried different drivers etc. Let it run overnight just in case it was a slow download - nada.
Tried the LG tool by entering the imei number first, but the tool reports a low battery and won't load the firmware. Phone is fully charged, i assume that battery level reporting is not working correctly.
Tried to load the kdz with the R&D tool, it errors out at 49%.
Tried to do the offline process with shttp from the unbrick any phone thread. It uses an older version of the LG tool and won't recognize that the phone is plugged in. If i install the newer tool that sees the phone, the process crashes the tool.
it all started when i tried to flash twrp and used the one for a different model g2. Dumb, I know. this is my first time soft-bricking a device.
Can anyone please point me in another direction?
UPDATE: phone was reporting that it was an 802. Downloaded and flashed an 802 kdz file and the phone booted! First time it was able to get past 49%. Nothing really works on the phone, but now i'm able to use the LG Mobile support tool to flash the correct firmware. The program is downloading the sofware now.
When you say LG tool I'm assuming you're talking about the official program you can download from their site?
I have the Verizon G2 and promptly erased everything on it the first night I got it.. Don't flash / wipe files at 4 AM when you've been up all day and night.
Anyway this thread http://forum.xda-developers.com/showthread.php?t=2432476 really saved my rear. Maybe the T-Mobile version will work to get yours back to stock.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.
Vepaot said:
When you say LG tool I'm assuming you're talking about the official program you can download from their site?
I have the Verizon G2 and promptly erased everything on it the first night I got it.. Don't flash / wipe files at 4 AM when you've been up all day and night.
Anyway this thread http://forum.xda-developers.com/showthread.php?t=2432476 really saved my rear. Maybe the T-Mobile version will work to get yours back to stock.
Sent from CAMACHO, my Verizon G2 (VS980) running PAC ROM.
Click to expand...
Click to collapse
works at the start and hangs at 49%. There is one bit that needs to be switched and this would work.
okay, looks like the phone is reporting that it is a d802 from my first f'd up flash. I think this may be causing the problems with flashing the 801 kdz.
Can i flash an 802 kdz onto an 801? then possibly later go back to 801?
Dear All,
I am trying to restore my bricked G2, but when I got to LG mobile support tool and select the language, it does NOT flash the KK kdz I downloaded, instead told me "Your device has the lastest software available from the LG mobile support tool. Please visit LG support website for more info..."
WHY???
FYI:
D802T Australia unlocked version, official 4.4.2 then rooted and installed Autorac which doesn't support D802T and stuck my phone at bootloop for good. Already downloaded the KK kdz. file and tools and followed this post"http://forum.xda-developers.com/showthread.php?t=2432476"
alohame said:
Dear All,
I am trying to restore my bricked G2, but when I got to LG mobile support tool and select the language, it does NOT flash the KK kdz I downloaded, instead told me "Your device has the lastest software available from the LG mobile support tool. Please visit LG support website for more info..."
WHY???
FYI:
D802T Australia unlocked version, official 4.4.2 then rooted and installed Autorac which doesn't support D802T and stuck my phone at bootloop for good. Already downloaded the KK kdz. file and tools and followed this post"http://forum.xda-developers.com/showthread.php?t=2432476"
Click to expand...
Click to collapse
Found any solution to this? Have the same problem, it says i have the latest software even though the software it is showing on my phone (which my phone doesnt really have) is older than the KDZ that I am trying to flash. If I force it to upgrade, it starts but gives an error at 37% every time.
xPreSiDenT said:
Found any solution to this? Have the same problem, it says i have the latest software even though the software it is showing on my phone (which my phone doesnt really have) is older than the KDZ that I am trying to flash. If I force it to upgrade, it starts but gives an error at 37% every time.
Click to expand...
Click to collapse
How do you force it to upgrade?
I have the exact same issue. Do you find any solution?
Entelstz said:
I have the exact same issue. Do you find any solution?
Click to expand...
Click to collapse
Use the LG Flash Tool instead.
Hi guys, I got my LG G2 a few months ago and it was my first android phone. Since I always jailbroke my apple devices I decided to root my lg g2. Everything worked fine until last week when I was prompted to install a software update. I thought this might mess up the phone since it was rooted so I postponed it until later in the day to give me time to research, but I forgot to postpone the update again and it went through at the scheduled time. Now when I turn my phone on, the lg logo is displayed, and then I get a boot certification verify error. I don't really know what that means but I can't do anything, no recovery, no download mode. I started to follow this tutorial but am stuck at what files to download. I do not know if I have the 10b, 11a, or 12b variant, and I can't find a way to check it without turning the phone on, which I can't do. I'm really lost at what to do at this point, I can't follow the only guide that might fix my phone. Is there another way to solve this issue or find which variant I have? Would verizon accept it back to fix or replace it since it's been rooted? I've read some people saying they unrooted their phone and then returned it to the carrier, is it possible to do that in my situation? I really need some help guys.
TBH: I would call Verizon, and tell them the phone was bricked by the update- hope they don't notice it was rooted when they warranty it. Problem is, if they do you get charged full amount for phone. I'd consider if you have insurance to just claim it on insurance.
try download lg support tool from lg website http://www.lg.com/uk/support/software-manuals
plug the device and wait for the software to recognize ur version.
I downloaded and installed it, but it won't recognize by phone. I have installed the drivers for it
ok.
try to follow this guide http://forum.xda-developers.com/showthread.php?t=2681089
and the files download from here:http://downloads.codefi.re/autoprime/LG/LG_G2/VS980/Stock_Firmware/10B_Partitions
lets try this virsion and see what happend..
download the 10B zip file and the dll file too http://downloads.codefi.re/autoprime/LG/LG_G2/VS980/Stock_Firmware
now it doesn't boot at all, not even to the lg logo. Additionally the partitions don't show up in ubuntu any more. I guess i'm completely screwed now?
I was Updating my LG G2 32 G through the Lg update tool on PC
the phone stooped in the middle of the updating posses
I had to download Stock Firmware and manually install it throw LG flash tool, but after the installation the phone became 16 G
I need the Stock Firmware D80220C-AME-XX 32 G please
and if anyone has another suggestion to solve this "I live in Egypt so any Firmware should be compatible with middle east area "
thank you in advance
ahmed.elaraby said:
I was Updating my LG G2 32 G through the Lg update tool on PC
the phone stooped in the middle of the updating posses
I had to download Stock Firmware and manually install it throw LG flash tool, but after the installation the phone became 16 G
I need the Stock Firmware D80220C-AME-XX 32 G please
and if anyone has another suggestion to solve this "I live in Egypt so any Firmware should be compatible with middle east area "
thank you in advance
Click to expand...
Click to collapse
http://www.lg-firmware-rom.com.
Enter your IMEI and you will be given your IMEI-specific .KDZ file to flash.
Flash it.
Enter your IMEI and you will be given your IMEI-specific .KDZ file to flash.
Flash it.[/QUOTE]
I have did that, and installed the .KDZ and then tried so many .KDZ files
the problem is the phone refuses to go back to 32 GB.
Hi everyone,
Just a month ago I purchased what seems to be an AT&T branded LG G6 from ebay. The seller assured that despite the latter the device would've been usable in the UK (where I reside) and that is true as I can use my sim and make calls and send SMSs. I lately faced the charging issue due to moisture and fixed it by purchasing a new charging cable, but I the view of that I also want to flash my current firmware to a Uk unbranded version.
I visited the following [wesite](https://lg-kdz-firmware.com/download...10l/18642.html) to download a GB kdz file for my device but I was then taken to this other [website](https://lg-firmwares.com/) where I located an [EU Oreo kdz](https://lg-firmwares.com/downloads/d...477f64fee0d181) file. I then thought I might as well get this one and flash once for good.
I then downloaded LG UP software and tried to flash my device. Initially, I was facing the 'can't load model' error which I then fixed with the [uppercut software](http://www.**********.com/make-lgup-...uppercut-tool/). Once ready to flash and I get an error message reading "error: kdz file is invalid H871 -> h870".
Can anyone help me with this? First of all, I'd like to say, despite all the props to the developers that created these awesome tools, I couldn't find a single official and complete guide on the LG UP tool. Can anyone please provide me with an accurate guide for LG UP?
If the kdz file that I'm using is the issue, can you please provide me with the right firmware files?
Take a look at https://youtu.be/EcxL_ZvDLzg