Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
+1
i have the same problem plz help
cambies said:
Hi, background is this..
I have a D802-10C G2 that i rooted the stock 4.2.2 rom a while back using the post chinese method. Easy enough, all worked fine. no complaints. A couple of weeks ago i got offered the OTA 4.4 update, this failed due to the root. I then removed the root using the feature in super su. that seems to have worked as no apps or file managers etc could get root access. However, the OTA still wont work.
Now my problem is my phone will no longer be recognized by any operating system, on multiple computers. I have tried many ADB drivers, Windows 7 wont even detect the device, i've used every PC connect mode, USB debugging. However always the same result, it's as if i'm plugging in a blank usb cable into the computer. Nothing at all.
The only thing that does happen when i connect the phone to a computer is the phone starts to trickle charge. There is nothing detected in Device Manager in Windows 7 I've tried connecting in download mode, nothing. I've tried the LG support tool, PC sync. Nothing.
WiFi does connect to the PC suite fine BTW and other than that the phone is working perfectly. I've also tried connecting multiple usb cables on multiple ports.
I haven't been able to find a single case of the same problem in the week or so i've been looking. Hoping someone can help, i'm thinking i may have soft bricked my phone. I really do not think this is a driver issue.
Any help would be great. cheers
Paul
Click to expand...
Click to collapse
YOu can try checking the device manager or use other USB port on your phone.
buenarc said:
YOu can try checking the device manager or use other USB port on your phone.
Click to expand...
Click to collapse
The problem is not like the usual ones you will see about "computer not being able to see device" I don't think it's a driver or software issue, or if it is it's unlike any i have found in the weeks i've been searching the net for a solution. Here's why....
When i connect the phone to Windows 7 and 8 ( on 3 different computers) No hardware is detected, nothing in the Device Manager, no yellow question marks indicating 'Unknown Hardware'. Nothing, all it does is start trickle charging.
Now even with no ADB, or any driver at all installed, the computer should still detect the phone. Mine does not.
The same thing happens using OSX and Linux Mint 16 (again multiple computers) No devices or mounted or volumes shown at all. Linux terminal command "$ lsusb" does not list my hardware.
This is why i'm pretty much convinced that there is something wrong with the USB port on the phone. Because, if Linux can't see it then surely it's a hardware problem right?
The only other thing i can think of is, i have messed up the phones firmware while trying to unroot it? but only because the timing of all this is just too uncanny.
I think i'll have to suck it up and admit defeat here. Funny thing is the phone works perfectly and charges fine.
Stuck on 4.2 , with no ADB functionality. Perhaps i'll sell it cheap to someone who doesn't care.
Cheers for the reply mate.
Same problem here!
Only my G2 is not rooted, it is still on factory OS and recently updated to 4.4.2.
I have tried on several computers, different ports and no help.
On the first connection to a PC not connected before windows reports "USB device not recognized" problem.
After that every time I connect the phone to the same computer the phone itself only recognizes that it is using USB charging mode, it does not recognize the computer connection (known by the USB ison on android system tray) even with "Ask upon connection option checked".
Even when I manualy change the Android mode in Settings --> PC Connection from MTP to PTP or even LG software, nothing happens.
Definetly there seems to be a problem with the phone, but I don't beleive it's a software but a firmware problem.
Please help if anyone knows what to do.
same thing happened after installing T-mobile rom thrugh twrp. but my device boots into fastboot and i tryed falshing :
laf.img, boot.img, aboot.img, recovery.img, laf.img
but after reboot my LS980 dissapear from device manager and stucked on LG logo.
Dont know what to do now.
I'm no expert, but given there are a lot of them here and none have weighed in on this with any ideas for a fix, i'm going to assume it's a hardware problem.
Anyone else agree? Hardware problem not software?
Cheers
I guess that you already wiped everything right? Apart from that, i'll suggest you to go to some tech supp and ask them if they can verify that each pin of the micro usb is properly working.
Sorry for my english, hope it helps!
Sent from my LG-D802 using XDA Free mobile app
I will try to check the connector although i dont think that it is a hardware issue.
BTW I can enter the download mode after flashing the mentioned partitions and i can also enter the stock LG recovery but when i do the factory reset it keeps showing Factory reset processing ... for ever
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Homero2 said:
It has happened to me the same thing :crying:, and is a problem with the boot.img, if by chance your G2 version 4.4.2 and the the 4.2.2 boot.img, goodbye.
The only solution is to take it to repair a service official, there will change you the card, with the consequent change of IMEI.quent change of IMEI.
Click to expand...
Click to collapse
where are you going to repair your G2?
and how much have you paid the repair?
THANKS
Any fix for this guys i have same problem!
Here I'm getting the yellow !, any suggestion?
Sirs, I flashed the baseband (https://www.androidfilehost.com/?w=files&flid=12880) then it got working back.
solved for me
I have some kinds of that problem, let try:
Settings -> General -> PC Connection -> Select USB connection method -> Media device (MTP) (or whatever)
Got this same issue after flashing cloudy g3 rom. Then later flashing dirty unicorns, which requires jelly bean baseband. But even restoring g3 and 24a baseband, still doesn't work. No pc tethering and no on the go usb. My usb port is basically charge only.
---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------
Everything else works fine...I actually never even noticed this bc I never tether to pc. But now I have to bc I want flask kdz
Help me please
someone have a solution to this problem?
My Lg G2 D803 still on boot loop (LG logo) and thats all ... no usb connection , reset factory doesnt work ...
HELP PLEASE ...
Thank you
Anyone has an idea how to fix this problem?
same problem
I have a LG G2 . recently updated from vs98027a to vs98039a 5.0 lollipop. Since the update my computer won't recognize my device in download mode and I don't have superuser ppermissions. Help plz
I also have the same problem.
It happened when I tried to backup info through LG PC Suite: the phone disconnected during the process, and now it's not recognized by any PC (http://forum.xda-developers.com/lg-g2/help/lg-g2-recognized-windows-backup-t3155323).
Also found a description of the same problem here: https://www.reddit.com/r/lgg2/comments/2urpnw/lg_g2_usb_only_charging_not_recognized_by_pc/ - no solutions, too.
Did anyone manage to fix this?
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Put your phone in Emergency Download Mode : switch it off, hold volume down button while plugging USB cable (already connected to the PC).
Then use the Support Tool to go back to LG ROM
mikesrike said:
Hello. Few months ago I installed unofficial Cyanogenmod 11 on my E610. After updating baseband it worked perfectly. After some time I decided to restore my phone to the state after installing CM11. It worked no problem. Today I wanted to do the same, and after installing SuperSU and Texdroider DPI I rebooted my cellphone, and it stucks on the cyanogenmod boot logo. If I try to get to recovery mode it stucks on the LG logo instead of CM. Hard reset is not happening at all. I tried to connect my phone via LG User Support Tool and install kdz firmware, but no luck. Although when I connect my phone without the battery to my PC i hear the "ding" windows sound, and phone exists in device manager. It also creates some disc drive in my computer, but unfortunately it's empty. I think textdroider has changed the build.prop file, so the cyanogenmod is not able to start at all. Is there any possibility to get to the build.prop file and change it, so phone will start? Or maybe somehow I can reset my phone or reinstall firmware using my USB cable without entering usb debug or recovery mode? Thanks in advance for any idea :crying:
Click to expand...
Click to collapse
in these cases emergency mode should work
removing battery sim sd etc... connect your phone to the pc throught us cable pressing vol- it automatically boot into download mode and you can easily use kdz.
make sure you have the last driver from lg websites else kdz wont find your phone, and set emergency option in kdz everything else it similar to a normal flash
hello
i have a problem with my g928f
my issue is that it can not be regognized by the windows
i have tried at my desktop with win 10 and at my laptop with windows 7 and at both says unknown device,
i have tried everything i know of
unistall everything from the pc regarding samsung drivers
install it again , nothing
install smart switch , nothing
install kies, nothing
run odin , not even see the phone at download mode
made factory reset from recovery , nothing
charge is working just fine both from pc and my wall charger
i tried mhl hdmi and nothing happened
tried just now otg cable with a usb drive , again nothing
just a week ago i was using it just fine with my pc
should i take it to a store to check my micro usb port??
noone??
today i replaced the screen with a new one witch had a new usb dock on it and the problem is still here
i can not connect it to any pc.
i cann't flash the stock rom because odin is not see it also
is it possible to be a rom problem????
i can't flash the stock one because of the usb issue
but i think i can download another lollipop rom to give it a try.
Have you made sure that it is set as MTP?
Setting - Storage - USB.
Check if the device gets connected in Fastboot mode. If it doesn't then it would be your USB.
sideload is not working either
usb is brand new and original.
is there a way to flash stock rom via recovery?
Hi guys! I have a problem with my Huawei P9 Lite (VNS-L31) It won't connect to my laptop anymore.. It charges but the laptop won't show that there's a device connected even in fastboot mode and I don't get a notification on my phone saying that it's connected to PC anymore it just charges ugh I don't know what caused this.. I didn't do anything I just unlocked the bootloader and rooted it with TWRP.. It worked yesterday but now it just doesn't.. I've tried everything.. Restarted the laptop and the phone.. Uninstalled HiSuite and reinstalled it.. Enabled USB debugging and "Allow HiSuite to use HDB".. Tried different cables.. And tried to connect my other phone with the same cables and they worked.. And I've also used this code (*#*#2846579#*#*) to change the USB port settings to HiSuite mode.. Idk.. And I tried to factory reset it.. Cleared cache.. Dalvik cache.. EVERYTHING! And now I'm trying to install the stock firmware maybe it'll work but I keep getting an error .. (Software install failed! Incompatibility with current version. Please download the correct update package.) Even though it's the right one and the latest B130 Anyway I hope someone will help me and you're not going to read all of this but thanks!
Did u solve at the end? i have same problem
Same problem
I'm not rooted have same problem
I had the same problem and solved it like that: Connect to your Laptop, enable mtp. Now wait a little bit and go to HDB settings. Turn it off and revoke all HDB authorizations. Turn it back on and wait till the HDB notification appears. You should be connected now. Try the same thing with USB debugging. Also, check your Huawei drivers, in device manager. If it all fails, install Huawei Firmware Finder and try to find Firmware for your phone. You might need a rollback package.
Hi I have RR custom rom on p9 lite & windows can't install/recognize MTP drivers for the phone. I tried with HiSuite but custom rom doesnt have HDB. I tried with USB debugging still same problem.....how to solve this??
Hey everyone,
recently I got a YU Yureka (bought it 2nd hand), and it was all working very well. I installed a custom theme pack and was enjoying the phone for hardly one day. Things started to go wrong when I thought to root my phone. So I plugged my phone into the PC. But the phone wouldn't show. I tried different cable and different ports but couldn't get it to work. It won't even show in the device manager. No android device or No other troubleshoot devices were found in device manager. I tried unplugging and re-plugging while device manager is on screen, and I didn't noticed it refreshing or detecting the device in anyway. I also tried enabling USB debugging and tried to turn it on and off but still no luck. The phone is charging when connected to PC but its not detecting as a device. When I selected USB connection mode in Settings>Storage, it says 'USB is now disconnected'. So I thought I would do a simple restart and see if fixes the problem then came the worst. My phone is now kind of soft bricked. I said that I installed a theme pack before, and I think that was the problem. The theme had replaced my bootlogo so that might have been the problem. So I wiped my device in recovey mode and restarted. Now my phone is not turning on, Its stuck at CYANOGEN screen. The Worse Case Scenario - I can't even flash stock rom cause my phone isn't connecting to PC not even in Fastboot. I'm totally screwed.
Well I don't know if its a hardware issue. and if someone had this issue earlier and solved it, please share your solution kindly..
Thank you
sXhokage said:
Admin Note: This is a special Q&A-formatted thread. Please follow this link to view it in your browser: http://xda.tv/post70563666
Click to expand...
Click to collapse
Fixed. It was a hardware problem. Phone is working perfect now
what is real problem i can't say , but if you want to detect your phone by windows automatically ,
shut down your system , unplug power of your computer from main board / turn off ups > unplug ups from main switch > wait 2 minutes .> now in phone developer options > enable android debugging > restart phone > connect phone to pc with usb cable and now plug your computer power in main switch > start your computer that's all
Install windows media feture pack in the computer
Sent from my YU5510 using Tapatalk