So when I first got my note I imediately used this guide to flash kitkat and completely ****ed it up, it just stuck on the Samsung n9005 screen.
This was a link to C4ETech's video called "Galaxy Note 3 - Samsung Official Kitkat 4.4.2 - How to Flash/Install" but I had to remove it.
I assumed it was something to do with the CSC code (mine being BTU) so I installed a BTU rom using this guide.
This was a link to TheSmokingAndroid's video called "HOW TO UNBRICK & UNROOT SAMSUNG GALAXY NOTE 3" but I had to remove it.
Now I want to install a kitkat rom preferably a stock one but there isn't one for BTU. So I looked at the custom roms as some support BTU but require the device to be on 4.4 already. How can I get onto 4.4 if every 4.4 rom requires a 4.4 phone? Will I have to wait until an official BTU update comes out?
I've attached a screenshot of my About Phone page (which doesn't have BTU anywhere, I don't get it).
I probably have the complete wrong end of the stick so sorry for wasting everyone's time but if you have a minute to help I'd really appreciate it.
HelloMyNamesTom said:
So when I first got my note I imediately used this guide to flash kitkat and completely ****ed it up, it just stuck on the Samsung n9005 screen.
This was a link to C4ETech's video called "Galaxy Note 3 - Samsung Official Kitkat 4.4.2 - How to Flash/Install" but I had to remove it.
I assumed it was something to do with the CSC code (mine being BTU) so I installed a BTU rom using this guide.
This was a link to TheSmokingAndroid's video called "HOW TO UNBRICK & UNROOT SAMSUNG GALAXY NOTE 3" but I had to remove it.
Now I want to install a kitkat rom preferably a stock one but there isn't one for BTU. So I looked at the custom roms as some support BTU but require the device to be on 4.4 already. How can I get onto 4.4 if every 4.4 rom requires a 4.4 phone? Will I have to wait until an official BTU update comes out?
I've attached a screenshot of my About Phone page (which doesn't have BTU anywhere, I don't get it).
I probably have the complete wrong end of the stick so sorry for wasting everyone's time but if you have a minute to help I'd really appreciate it.
Click to expand...
Click to collapse
Try *#1234# might come up there. Anyways, go over to Sammobile and grab any of the latest 4.4.2 KitKat ROMs for your device (9005) as you said. And it should work fine.
Advice: Wipe your phone, not compulsory but advisable. Cheers!
I have a canadian variant note 3 900w8 and i want to flash 4.4.2 as well but i was hoping to flash the t-mobile version as i have heard of issues with the 9005 rom compatibility, just wondering if anyone has had experience yet, or if it has been done.
stanley08 said:
Try *#1234# might come up there. Anyways, go over to Sammobile and grab any of the latest 4.4.2 KitKat ROMs for your device (9005) as you said. And it should work fine.
Advice: Wipe your phone, not compulsory but advisable. Cheers!
Click to expand...
Click to collapse
Thanks for your help but I've already done that and the newest version I can get is 4.3 I'll just wait until my phone gets the update, Thanks anyway
I've managed to get onto 4.4 now by flashing a polish ROM after reading that they support BTU, I don't know how to delete this thread so I'm just letting everyone know my issue is resolved
Jagerfarts said:
I have a canadian variant note 3 900w8 and i want to flash 4.4.2 as well but i was hoping to flash the t-mobile version as i have heard of issues with the 9005 rom compatibility, just wondering if anyone has had experience yet, or if it has been done.
Click to expand...
Click to collapse
If you want the ability to flash back to 4.3 from 4.4, install custom recovery and roms and keep your Knox 0x0, head over here and do some reading ( if you haven't been there already ).
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
LS.xD said:
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
Click to expand...
Click to collapse
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
daganteng15 said:
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
Click to expand...
Click to collapse
Please tell me which firmware version is actually installed and which version you want to flash? Which region is your phone?
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
3xhon said:
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
Click to expand...
Click to collapse
Yah.. were the same.. there are two new update on grand prime XTC Philippines (open line) but cant flash in odin. And also can not update the device in OTA. Please help.
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Shinkumara said:
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Click to expand...
Click to collapse
To upgrade the device is not necesarry to download the firmware of the respective region, u can flash any version of firmware for another regions, the only need to know is the respective version of firmware is for your device only that, i have flashed many firmware in my prime without issues ever from other regions ( most actual than my original region ) and y device is working ike a charm
Have you rooted the phone?
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Hello guys I have solve this issue by flashing different firmware I used Nepal firmware. XTC firmware is corrupted.
You can use different region firmware if your phone is openline.
You can read my posts here
http://forum.xda-developers.com/gra...ully-rooted-galaxy-grand-prime-t2935607/page8
Shinkumara said:
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Click to expand...
Click to collapse
no i dont flash many versions in my device, just flash the latest update from other region and works fine, the region is not important
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Apocalypse Now said:
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Click to expand...
Click to collapse
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
vancer32 said:
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
Click to expand...
Click to collapse
Solved it. Thanks. I should have flashed a newer version of firmware; I flashed Kazakhstan and it went OK.
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
You have to flash exact soft for your region and phone. Grand Prime have many versions so you must select right one. In East Europe there is no secure bootloader or maybe I haven't encountered it yet. If you have secured bootloader so probably it's gonna be same like Sony or HTC. You'll have to unlock it. I can't say where
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
And did you solve that problem guys?
awha said:
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
Click to expand...
Click to collapse
The order did not do any difference. Why should it do?!
Before a chance the rom, I rooted my cellphone by this way
[ androidxda. com/root-samsung-galaxy-grand-prime-sm-g530h ]
It worked!
As someone said here, I should need to unlock the bootloader, I looked for I solution and I find this one
[ techtudo. com.br/dicas-e-tutoriais/noticia/2014/07/como-destravar-o-bootloader-de-um-dispositivo-android.html ]
this site is in portuguese-Br
it did not work
so, I installed samsung kies, and odin 3.04. And also didn't worked.
Now, I installed CMW recovery
[ mediafire .com/download/w0gzfrq7xtvztdr/Galaxy+Grand+Prime+CWM+Recovery.zip ]
still the same
finally, I downloaded odin 3.10.6, and instal a rom from india. As I find here [ droidviews .com/install-android-5-0-2-lollipop-firmware-on-galaxy-grand-prime-sm-g530h/ ]
Before I was trying Russia's rom.
After all, I noticed, and I read here, that depends on firmware which I was intalling
New to the forum but I do know a bit about custom ROMS and flashing (I think)
So basically, I own a Chinese variant Samsung Galaxy S4 (GT-I9508) that is rooted and currently in Android 4.3 Jellybean. Recently I saw some sites with unofficial firmware updates for this model (I9508) to Android 5.0.1 Lollipop and decided to give it a go at flashing. Tried about 3 different MD5 files using Odin v3.10, but every time it would fail, saying that no PIT files are found. So I then proceeded to look for PIT files for the I9508 model online, without any success. Do I need a PIT file for this? Or am I missing something else?
Dunno what's going on. Any answers will be much appreciated
thx
bump?
kenalien said:
bump?
Click to expand...
Click to collapse
You can flash via ODIN the latest LOLLIPOP stock rom OFFICIAL for your device: HERE.
Hi Guys,
Recently got the a Note4 after being an S4 fan for 2 years. Tried to go ahead and root my device and i presume failed miserably. I don't think i did enough background research like i did before when rooting my S4.
Model: SM-N910G
Android V: 5.11
So,
I followed this to root my NOTE4: http://forum.xda-developers.com/note-4/orig-development/sm-n910-cf-auto-root-t2897428
Then my phone didn't pick up any signal and kept restarting every 2 mins once the device was turned on. So i looked around some more threads and saw a post that i should download and boot this:
http://forum.xda-developers.com/showpost.php?p=62241991&postcount=56
I still have no Mobile data signal and my phone keeps restarting!
Any guidance how to get it back to normal? I don't even care about having my phone rooted anymore - Or am i completely stuffed?
Many thanks!
download stock firmware from sammobile and flash with odin.
You've been doing things wrongly.
Firstly, the CF autoroot for N910G currently only supports up to android 5.0.1.
Secondly, you should not ever install kernel that is not for your specific phone model. Sprint Note 4 =/= International Note 4 Snapdragon (N910G)
To restore back to normal, download official firmware for your phone (N910G). And then flash it using Odin 3.10
Edit: Download official stock firmware from either Sammobile or Samsung-updates. Or u can use the firmware downloader created by fellow XDA member. Be sure to download the correct firmware version/carrier
Thanks guys. Problem solved!
Help.
I have a galaxy note 3 Sm N9005 running on android 4.3. I want to upgrade it but whenever i check for an update it shows " your device is running on the latest software".
Google.
Sent from my Note 3 running Purify CM13
I am sure that V4.3 is not the latest Android for Note 3. But I am not clear why you got that version checking result.
You get the latest version for individual phones .Basically dependant upon supplier/ network .
Sammobile lists latest firmwares .
Try updating via Kies
Go to sammobile.com
Download the latest version and flash it using odin
Maybe there is something wrong woth your firmware....so try this method