I am adding new information immediately below, enclosed by brackets and above my original comments!
[I bought a second Android generic Chinese radio and it also had the same issue with no audio when using Aux In. After some back and forth with the seller, I got a response that the seller contacted the manufacturer, and the seller was told the Aux In feature was no longer supported. I've asked if the seller can find out how/why.
I would really like to hear from anyone who has bought any one of the many generic Android radios off eBay or Amazon and if they have tried the Aux In function and what results were observed. Thanks!!]
Original Comments:
I've recently installed an Android radio, OS 9.1 with 10.1 inch screen and most everything works great except for the Auxiliary Input.
I get no audio at all using Aux In. I've tried two different mp3 players and two different 'mini phono to RCA' adapter cables - plus I know both of those adapter cables are good because of having used them elsewhere. The audio from the mp3 player is enabled to be played on this Android radio by use of the "Avin" app, which of course I've tried. I've ensured the volume on the mp3 player is turned up, and I have verified the mp3 player does indeed have sound output by using earbuds.
Most everything else on the radio works great - radio, USB functionality, navigation, backup camera etc. But it is interesting to note that nothing works on the one connector which has the RCA jacks for Aux In, Audio Out, and Video In......the audio out RCA jacks don't put out sound to a device capable of using it, and the video in jacks display nothing on the screen of the Android radio when a video input is provided. I have ensured multiple times the connector which has these features is fully plugged in and seated properly in the radio. All of the pigtail wires associated with this connector look good, and I see no pushed pins or other anomalies.
U found fox yet? I have some problem it works only with aux out but have two streams of music eg radio and ipod
any update with this? I got issue too
Same issue here.
Same issue here
Must be a "generic radio" thing. I have a Dasaita and AUX in (called AVin) works fine.
You do need a "AVin" app (or similar) for it to work though. Are these "generic radios" missing the aux or "avin" apps?
Bob_Sanders said:
Must be a "generic radio" thing. I have a Dasaita and AUX in (called AVin) works fine.
You do need a "AVin" app (or similar) for it to work though. Are these "generic radios" missing the aux or "avin" apps?
Click to expand...
Click to collapse
Yes is a generic Android 10 here is a photo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can't seem to find it. I read in another post that when you enable the front camera, it changes...from aux to front av.
I haven't test it, asked the seller, but haven't got ta response...language barrier plus time difference is a hassle.
I'm gonna look for avin or similar....
Or there is a apk for that
ElShaman said:
Yes is a generic Android 10 here is a photo
View attachment 5433865
I can't seem to find it. I read in another post that when you enable the front camera, it changes...from aux to front av.
I haven't test it, asked the seller, but haven't got ta response...language barrier plus time difference is a hassle.
I'm gonna look for avin or similar....
Or there is a apk for that
Click to expand...
Click to collapse
On my device AVIN has always been there from the factory. The app that you speak of when you enable the front cam is F CAM. With front cam enabled the F CAM app is visible. With the front cam disabled then F CAM is no longer visible, but my AVIN is always there regardless
Bob_Sanders said:
On my device AVIN has always been there from the factory. The app that you speak of when you enable the front cam is F CAM. With front cam enabled the F CAM app is visible. With the front cam disabled then F CAM is no longer visible, but my AVIN is always there regardless
View attachment 5433955
Click to expand...
Click to collapse
I don't have that app, is it possible to install it?
ElShaman said:
I don't have that app, is it possible to install it?
Click to expand...
Click to collapse
You can install any app. The question is; will it work.
This particular AVIN app is a Dasaita specific app built for Dasaita machines and it doesn't come from the google app store. You need to find the app that works with your machine... if you can find one that works at all.
That's the problem with these "generic" machines. Most of the time they are put together by resellers who don't include all the software.
Bob_Sanders said:
You can install any app. The question is; will it work.
This particular AVIN app is a Dasaita specific app built for Dasaita machines and it doesn't come from the google app store. You need to find the app that works with your machine... if you can find one that works at all.
That's the problem with these "generic" machines. Most of the time they are put together by resellers who don't include all the software.
Click to expand...
Click to collapse
Yes I've been noticing...
I'll try to talk to the seller patiently and see how it goes...
Related
Hi all,
I recently bought a Cheap Chinese HU, but im not that happy with it, so im loking for another one.
Features i wish to have:
-Designed for the VW format
-Custom Roms
-Seperated Subwoofer output
-2 gig Ram if its possible.
-No disturbing noises
-"fast" boot
-Bluetooth audo
-Good working wireless
-Spotify should be running good( maybe can i set this as standart app, so everytime i boot the HU up, it should automaticly start(its just a nice to have))
I really dont give much about radio, so it doesent matter if that dont work well...
I hope someone can help me to choose the right one.
only option for 2GB of RAM is probably In-Dash.net, and it is relatively new, so probably still buggy.
What Cheap Chinese unit did you get?
"fast boot" - probably not going to happen. All of them hover around 20 to 30 seconds.
i dont have a VW, but I have a Jeep and have a Joying specific for the Jeep, all of those other items are solved with the Joying 5.1 MTCD:
The should have a VW version
I use Malaysk ROM v4 and it works fine
My sub and amp are tapped into the existing speaker wiring, but the Joying does have a separate subwoofer RCA port
I dont have any noises
Bluetooth for music works great. Bluetooth for phone works, but is mono, so it only comes out of one speaker. Works fine, but sounds odd at first, I'm used to it at this point
Wifi is strong, picks up my house wifi from my Driveway.
Spotify works like a champ, allows you to download to the SD card. I use it every day
this the one I got for my Jeep:
https://smile.amazon.com/Challenger...F8&qid=1472658147&sr=8-1&keywords=joying+jeep
I would assume they have a comparable one for VW, probably this one:
https://smile.amazon.com/Lollipop-R...011&ie=UTF8&qid=1472658188&sr=8-1&keywords=VW
---------- Post added at 12:02 PM ---------- Previous post was at 11:43 AM ----------
I posted this in another thread, but it is relevant to your Spotify question
I have a different sized Joying, mine is for a Jeep, but it is Android 5.1, MTCD. Spotify works like a champ
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let's you save it SD
And using MTCDtools let's you use the steering wheel controls
Sent from my SM-G935V using XDA-Developers mobile app
SynMaki said:
Hi all,
I recently bought a Cheap Chinese HU, but im not that happy with it, so im loking for another one.
Features i wish to have:
-Designed for the VW format
-Custom Roms
-Seperated Subwoofer output
-2 gig Ram if its possible.
-No disturbing noises
-"fast" boot
-Bluetooth audo
-Good working wireless
-Spotify should be running good( maybe can i set this as standart app, so everytime i boot the HU up, it should automaticly start(its just a nice to have))
I really dont give much about radio, so it doesent matter if that dont work well...
I hope someone can help me to choose the right one.
Click to expand...
Click to collapse
I think this meets all of your criteria:
https://m.aliexpress.com/item/32506591632.html
twokidsandaphone said:
I think this meets all of your criteria:
https://m.aliexpress.com/item/32506591632.html
Click to expand...
Click to collapse
That one only has 2 reviews, and the 2nd one says be warned that it has issues
Sent from my SM-G935V using XDA-Developers mobile app
CadillacMike said:
That one only has 2 reviews, and the 2nd one says be warned that it has issues
Sent from my SM-G935V using XDA-Developers mobile app
Click to expand...
Click to collapse
There's a ginourmous thread here on the Newsmys and my two work great. Never had an issue flashing the custom ROM. They are not perfect but I think you should look into them a bit more before condemning them and me.
To the OP in case you are interested I gave my thoughts on the Newsmys here: http://forum.xda-developers.com/showpost.php?p=68222210&postcount=20
CadillacMike said:
only option for 2GB of RAM is probably In-Dash.net, and it is relatively new, so probably still buggy.
What Cheap Chinese unit did you get?
"fast boot" - probably not going to happen. All of them hover around 20 to 30 seconds.
i dont have a VW, but I have a Jeep and have a Joying specific for the Jeep, all of those other items are solved with the Joying 5.1 MTCD:
The should have a VW version
I use Malaysk ROM v4 and it works fine
My sub and amp are tapped into the existing speaker wiring, but the Joying does have a separate subwoofer RCA port
I dont have any noises
Bluetooth for music works great. Bluetooth for phone works, but is mono, so it only comes out of one speaker. Works fine, but sounds odd at first, I'm used to it at this point
Wifi is strong, picks up my house wifi from my Driveway.
Spotify works like a champ, allows you to download to the SD card. I use it every day
this the one I got for my Jeep:
https://smile.amazon.com/Challenger...F8&qid=1472658147&sr=8-1&keywords=joying+jeep
I would assume they have a comparable one for VW, probably this one:
https://smile.amazon.com/Lollipop-R...011&ie=UTF8&qid=1472658188&sr=8-1&keywords=VW
---------- Post added at 12:02 PM ---------- Previous post was at 11:43 AM ----------
I posted this in another thread, but it is relevant to your Spotify question
I have a different sized Joying, mine is for a Jeep, but it is Android 5.1, MTCD. Spotify works like a champ
Let's you save it SD
And using MTCDtools let's you use the steering wheel controls
Sent from my SM-G935V using XDA-Developers mobile app
Click to expand...
Click to collapse
MAny thanks to all the replys
At the moment, this is the one ive got:
https://www.aliexpress.com/snapshot/7997585527.html?orderId=77627076660931
I cant even find a Model Number, MCU or stuff i need to know to flash a custom rom... also it has this pretty anoying "noise" on low volume.
Im already in contact with joying to find a HU wich works in my car.
Alright, i think a found one:
https://www.carjoying.com/eu-wareho...camera-dvr-google-play-store-bluetooth-f.html
many thanks for your help.
twokidsandaphone said:
They are not perfect but I think you should look into them a bit more before condemning them and me.
Click to expand...
Click to collapse
I dont know why you took offense to that, I wasn't condemning you? i just pointed out the comment on that link said they had some issues
SynMaki said:
Alright, i think a found one:
https://www.carjoying.com/eu-wareho...camera-dvr-google-play-store-bluetooth-f.html
many thanks for your help.
Click to expand...
Click to collapse
Looks good, pretty jealous of that 8 inch screen...
The new Dasaita 10 inch PX6 (HA2158-MAX6) has an rca out put on it which is not on my PX5. A blue plug labeled "MID out"
Does anybody know what that is?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
duh
It is for an amp to run your "mid range speakers"
Midrange "speakerS??
Never heard of a "midrange speaker" output on a head unit before..... and I have had lots of them.
If that's what it is, It would be a first.
What did the reseller say about it?
marchnz said:
What did the reseller say about it?
Click to expand...
Click to collapse
After 2 emails and no answers, I gave up asking
Interesting...
There seems to be a bit more detail in the sales description...
Special Features
Fast boot functions, 1 Second ( warm start only)
Build in GPS/Wifi/Radio
Two Camera input ,front/rear
Full HDMI output for headrest
1 Sub 1 Mid 4 Audio Output (2V)
3 USB output ,1.5A Each
RGB button illuminations
Click to expand...
Click to collapse
So it's definitely an audio output and it's output I believe is higher. I believe the standard gain output on the RCA's for these android head units is 1.4 volts.
What result do you get when plugging an amp/speakers into it?
It's a center channel for a single speaker like on a home theater 5.1 surround sound system. Notice there's only 1 channel for the sub as well. They have the same thing on Ownice K3 but they used the correct name.
marchnz said:
What result do you get when plugging an amp/speakers into it?
Click to expand...
Click to collapse
I don't own one.... YET. I'm just trying to work out if the upgrade is worth it. I have the Dasaita px5 android 8
nic2k said:
It's a center channel for a single speaker like on a home theater 5.1 surround sound system. Notice there's only 1 channel for the sub as well. They have the same thing on Ownice K3 but they used the correct name.
Click to expand...
Click to collapse
That's the only thing that makes sense to me, but why you would have one on an automotive head unit and where you would actually mount a 'center' channel is beyond me. Subwoofers you can mount just about anywhere because low frequencies are not very directional. But once you get into "mid" and particularly high frequencies, they're highly directional and speaker location becomes somewhat crucial.
It is quite interesting none the less.
It might be fun to play around with it. Problem is I drive a jeep. Not much room in a jeep and you can't attach things to the (removable) top or have speakers in the (removable) doors.
Is it possible on Dasaita MAX6, to play the audio mp3 track present on a USB stick and make them come out from the HDMI output?
gkecorp said:
It is for an amp to run your "mid range speakers"
Click to expand...
Click to collapse
lol......
Nico074 said:
Is it possible on Dasaita MAX6, to play the audio mp3 track present on a USB stick and make them come out from the HDMI output?
Click to expand...
Click to collapse
I am interested too, I have connected the HDMI output to a monitor with speakers and no audio was audible. I'm researching about HDMI output spec for PX6.
Any help is appreciated.
Got my max6 yesterday. Both the green and blue are labelled Sub for me. But newer cars have a center speaker dedicated to calls, so I'm guessing mid is a full range center output which you COULD use for a sub? probably going to hook up the center as the second input to save me using an RCA Y- splitter for my two channel amp to drive my two subs.
I have this unit, (image) bought from aliexpress.
Very happy with this unit that is very fast compared to old unit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have following issues that i cannot correct, no matter how much i google i cant find correct solution:
- Bluetooth will only connect to my phone, not to OBD2 adapter. There is no settings for bluetooth in the settings, so i cant even find the adapter. Is there any bluetooth fetures that have been crippled for some units?
- The EQ is very bad, seems it has some presets that all sound ****, except for one, and if i try to modify that setting it reverts back to very bad sound. If i make exact copy of the good EQ setting, under the "personalized" setting, still the sound is not the same. Seems the EQ is just BS. Is this a common problem, any solutions?
- Reverse camera image is inverted / mirrored. And when i change this setting in the settings, nothing happenes to the image. No matter how much i change setting. Anyone knows good solution? There is impression for me that settings does not affect anything, its just a marker in the setting menu.
I would be very happy for any suggestions towards helpin these issues.
I am using Pulsar media player for music - only. (no spotify or other streaming services)
Do i need to provide other info in order to solve these issues?
Thanks guys!
//GF
goodfidelity said:
- Bluetooth will only connect to my phone, not to OBD2 adapter. There is no settings for bluetooth in the settings, so i cant even find the adapter. Is there any bluetooth fetures that have been crippled for some units?
//GF
Click to expand...
Click to collapse
Set BT pass on head unit same to OBD2 pass. That resolved problem with my OBD2
I have the same issue on my HU, but it's different to your HU.
I can also only manage the Bluetooth through the phone app. Often the pair just don't work. It fails to connect to odb2.
What you mean with "Set BT pass on head unit same to OBD2 pass. That resolved problem with my OBD2"?
tzac29 said:
Set BT pass on head unit same to OBD2 pass. That resolved problem with my OBD2
Click to expand...
Click to collapse
I think you didnt understand my problem.
The bluetooth options are completly removed from the settings menu. There is no setting for bluetooth to be found.
I cannot even search for BT items.
The phone is paired to the android unit from using the phone app. However that will not allow pairin of OBD2 or any other BT units.
Are there some units crippled not to accept BT pairing with other units?
//GF
tomygunner said:
I have the same issue on my HU, but it's different to your HU.
I can also only manage the Bluetooth through the phone app. Often the pair just don't work. It fails to connect to odb2.
What you mean with "Set BT pass on head unit same to OBD2 pass. That resolved problem with my OBD2"?
Click to expand...
Click to collapse
You need to change the BT pin on the main unit, to the one defined for your OBD2 adapter e.g. 0000 on this picture change to 5678 or 1234 or 2345 .....
Ah okay, i tried it, but still same issue. I contacted the seller.
My problem is that there is no bluetooth settings at all. There is no place in settings where i can choose bluetooth to sync any bluetooth items. Only in the phone app, and that only allows to sync phones.
Is bluetooth disabled in this unit?
What do you see at the connection icon left to it.
tomygunner said:
What do you see at the connection icon left to it.
Click to expand...
Click to collapse
Connection settings left to what?
The normal place for bluetooth in the settings has not even the word bluetooth. Just wifi.
On the other units there is also bluetooth settings in this place, however on this unit there is not.
I tried to download other bluetooth apps to activate it but non of thos apps work on my unit. However the phone conncets perfect and has good range..
What do you see when you Click on that icon?
I now changed the OBD2 unit and managed to establish contact. Even if this unit was showing on other units, it was not showing on the head unit.
Now the BT is working as expected, still i dont have any setting for bluetooth inside the settings - where it should be.
Other problems still remain.
Equalizer is not working good at all. Seens that only one of the settings is working, rest is very bad soundquality. Even if i make custom preset exact same as "rock" sound is completly different. Like night/day.
Also i cannot mirror the cameras, the unit does not understand mirror and there is no difference in image when i klick mirror button in settings. So left becomes right and vice versa.
I noticed there are TWO EQ apps running same time.
Anyone seen this problem before? That might explain why sounds is like ****.
I tried to forcequit one does not help.
Any suggestions?
Dear goodfidelity, I have same issue with bluetooth
did you find any solution to your problem?
Just got one of the Binize 7" 2x32 android 9 head units. Not really impressed with it so far.
https://www.amazon.com/gp/product/B07VHD4B23/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I also have one of the Podofo 7" 1x16 android 10 2020 versions. Screen looks the same but there are more connectors on the rear. It is much faster. Noticably to the touch. https://www.amazon.com/gp/product/B08GKBQ1X5/ref=ppx_yo_dt_b_asin_title_o03_s03?ie=UTF8&psc=1
Are there some better units out there right now I should be looking at?
Really want a DUAL din and able to load offline maps to if for BackCountry Navigator, Google Maps, and a couple others. Maybe use one of my external USB Drives for music videos, music, and other movies.
I just modified the dash of a Discovery 1 to fit a dual din. Now I want a large screen to fit in there to utilize the space I made.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 5126247
They are all botched/buggy in someway, but it's not easy to know who makes these units and what they are just from the reseller verbiage.
Like the previous poster says. Pretty much every android head unit has issues. Each one is a different set of issues. Nobody out there seems to be doing proper reviews on these that focus on what does and doesn't work.
I've been through four so far. Every one has issues.
So I tried to switch to a Pioneer and guess what, it has issues too. I'm disgusted with the whole car audio industry. All I want is what's on my phone to be on my dash, without having to whip my phone out of my pocket and wire it up every time I go for a drive.
Apparently that's asking too much of the industry.
Fwiw the features I need/want are:
1. Supports modern digital steering wheel controls (they all seem to only support analog SWC which nobody has)
2. Either have a proper bluetooth phone feature with voice commands and quality audio OR trigger when it detects incoming audio on the aux in from my cars built in bluetooth (currently the best option I've found is I have to tap aux in every time I receive a call)
3. Pair and STAY paired with bluetooth OBD dongle for dashboard data logging. So far not a single one has been able to do this reliably, they tend to disconnect randomly and require constant re-pairing. Best if it supports newer profiles of dongles like the OBDLink which has a faster refresh rate, but so far only one of the four I've tried does that, and it requires repairing every bootup.
4. Have a screen DPI thay doesn't freak out common apps. Some of my apps don't work because of screen DPI issues on some devices.
5. Don't randomly reboot, 2 of the 4 devices I've used have this issue.
6. "Dancing" Gps or GPS that can't get a lock. One device I used the GPS jumps around randomly, the other can't even get a signal half the time.
7. Static/noise/audio problems. One has a hiss, one had loud static when no audio was playing, and another the audio would randomly cut out.
Dunno what I'm gonna do next.
skygear said:
Just got one of the Binize 7" 2x32 android 9 head units. Not really impressed with it so far.
Click to expand...
Click to collapse
I'll tell ya.... I'm on my third android head unit (all Dasaita's) and I have not had one yet which produces good clean sound without a low grade white noise (the noise which you are describing). The Dasaita I have now in fact is top of the line... cost $700US and it has the same low grade white noise the rest of them do.
I love these android head units for what you describe.... large screen, good off line maps display, engine data display... yadda yadda. They make really great overall information centers, but they ALL seem to just suck for good clean sound.
At this point I'm really considering running two head units, a double din dasaita with a 10" screen for my information center, tv, videos... etc, and a smaller single din Pioneer or Kenwood for all the audio, and the bluetooth phone connection. This is the only answer that I can see if you want to run an android head unit.... and have clean sound at the same time.
I'd also Like a to have an actual readout of what ALL the connectors are for on the back. If I plug in ALL the connectors they sent. I still have 2 ports which are empty. I can imagine maybe one is for a Wired OBD2 port cable and maybe the others for Environmental controls or steering wheel interface? Wherever these are originating from, they are not including all the features with them. Might put an amplifier on these and see how they perform. The audio isn't the best..
Main issue I had was the Binize keyboard wouldn't show up. I had to factory reset the device to enable it. I am beta testing Android 11 on my Note 20 Ultra 5g. Had NO issues with it until I paired it with this radio. No keyboard would show on my phone either. then the screen froze on my phone. Next, my storage corrupted/ disappeared, then reappeared and the phone reindexed everything so all my media (photos, video, etc. ) is all out of order now since it re scanned.
I'm thinking a USB drive with all the content might be the way to go. But are these really limited to just 32gb external storage? Shouldn't these be able to read ANY external storage formatted properly?
skygear said:
I'd also Like a to have an actual readout of what ALL the connectors are for on the back. If I plug in ALL the connectors they sent. I still have 2 ports which are empty. I can imagine maybe one is for a Wired OBD2 port cable and maybe the others for
Click to expand...
Click to collapse
The extra ports are a little different from machine to machine but Dasaita puts in extra ports for TV, TPMS, DAB, Dashcam, and auxiliary a/v input. You can take a wild guess at the what the inputs are judging by the software which comes on your machine. The dasaita line for example comes with a TV app, TPMS app, DAB apps, A/V in app, and a DashCam app.
Wired obd2 works through usb and will only work with apps (like torque pro) which support usb connections
For what it's worth... I already have (3) external amps connected. 850 watts to the front, 1000 watts to the rear, and 2250 watts to the subs. Still get that low grade white noise.
Bob_Sanders said:
The extra ports are a little different from machine to machine but Dasaita puts in extra ports for TV, TPMS, DAB, Dashcam, and auxiliary a/v input. You can take a wild guess at the what the inputs are judging by the software which comes on your machine. The dasaita line for example comes with a TV app, TPMS app, DAB apps, A/V in app, and a DashCam app.
Wired obd2 works through usb and will only work with apps (like torque pro) which support usb connections
For what it's worth... I already have (3) external amps connected. 850 watts to the front, 1000 watts to the rear, and 2250 watts to the subs. Still get that low grade white noise.
Click to expand...
Click to collapse
Have you tried putting ground isolators on everything?
Sent from my SM-N986U1 using Tapatalk
skygear said:
Have you tried putting ground isolators on everything?
Sent from my SM-N986U1 using Tapatalk
Click to expand...
Click to collapse
It's not ground loop noise so ground isolators wouldn't do much. This is a low grade white noise like what you would hear from an FM radio when not on a station. Both my PX5 and PX6 have it. It's not very loud... but it's there.
Hi guys, after googling through this forum and several others for days, Youtube videos, etc, etc I reached a point I am at a dead end guess I need some help, some weeks ago I bought this unit from Aliexpress Seller Skyshadow (yes, it seems to be a recurring problematic seller from what I gathered reading XDA posts).
https://www.aliexpress.us/item/3256...2z0BgWP&gatewayAdapt=glo2usa&_randl_shipto=US
Seller does not provide any support other than a PDF with the GUI features and that is it... also my Android Version that came installed was Android 11 not 12 but I digress...
I made almost everything work except making calls and running carplay, found the 3368 factory code from somewhere and managed to get into the factory settings, in some other post somebody says these head units are the same as Navifly ones and some other said they are Medeke / Mekede (sp?) but the settings and options are named totally different and I have not been able to make the reverse camera display something else besides "no signal". Already checked the camera connected at the CVBS IN jack and when going to the aux app it shows great video resolution, the canbus pink reverse wire is working properly and it triggers the reverse display but no signal is shown when connected to CAM IN or CAMERA IN jacks.
Currently the unit detects both SIMS properly and even when they are active lines, it says when trying to dial: "cannot place call in current state", I could live without 4G connectivity, but the reverse CAM is a must.
I already disconnected the pink reverse wire, put the car in reverse so the camera got voltage and it showed me a perfect picture in the AUX app, if I connect it to the yellow CAM In or CAMERA IN, then no picture at all. I cannot find a setting to enable camera for these inputs.
This is the CVBS-AHD 1280x720P camera that I am using and its working properly on any input except on reverse:
https://www.aliexpress.us/item/2251...29lHhNo&gatewayAdapt=glo2usa&_randl_shipto=US
I already connected another camera and same story, cut the white wire to convert the camera from CVBS to AHD and no luck... I already tried another cable, gender changers, other cameras, etc, etc, etc and the head UNIT properly displays the image on CVBS IN 1 and CVBS IN 2 jacks, but connect it to CAM IN or CAMERA IN and... "no signal", I already tried to find all the possible menus, settings, restarted the unit, etc and absolutely no luck.
I am enclosing some pictures in this post to help you identify if I am doing something wrong of if its there a workaround I can do to make reverse work with CVBS IN 1 or 2 instead of the CAM IN or CAMERA IN jacks?
Thank you very much for any insight you can provide me.
Here is working properly showing video in AUX APP CVBS IN 1:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The main screen:
Factory settings screen:
the CVBS IN jacks and the canbus decoder box with the pink wire connected that properly triggers reverse:
The message I get when going into reverse with the camera connected to the CAM IN or CAMERA-IN jacks:
Info about the device:
It's an fyt based unit uis7862. Head over to FYT forums