I have a tab e 8.0 which doesnt turn when i press the power button but if i plugged in my charger it turns on then it will go to "installing system update" with a android logo then it will say "erasing" then "installing system update" then "erasing", it goes looping like this, at first i flash a stock rom but the problem is still there, is this a soft brick or hard brick? Any solutions? Tia
Up
Any solutions?
Any solutions ??
Related
My phone is showing different unusual behaviors..
1. Its stuck at "Samsung Galaxy S5 Duos powered by android" logo for about 30minutes
2. After about 30min, it shows "Device storage corrupt. The data partition has been corrupted. You need to reset your device to factory default settings. This will erase all your data. " And there is reset device button also, but then when clicked does no thing.
3. Once it went to even at "SAMSUNG" logo and got stuck there.
When it is in state 2(as mentioned above), pressing volume down and up button changes the volume level also.
What shall I do to get it back?? Its not even rooted.. Please help
Is this forum dead??
Is this forum really dead??? Why is no body replying?? I need help...
Tried intalling Android 6.0 Marshmallow and phone got bricked ( I assume), it's stuck on the Huawei logo. Turning "off" just restarts it and vol+, vol- and power button just puts it into the EMUI screen where it says "Verifying update package", "Installing update package". This gets to 100%, phone restarts and back to huawei logo. any ideas?
Thanks in advance.
Hi!
Is a P8 Lite ALE-L21?
Try this to unbrick: https://forum.xda-developers.com/p8lite/help/fix-bootloop-freeze-logo-t3639688
.
Hi guys .. so i downloaded a custom theme from here ( dna aos-p black ) .and it worked however when i restarted my phone it was all messed up so i went to reapply it and then my phone restarted and now is stuck in boot loop.. it shows flashing Samsung logo and then optimizing apps and the turns off and repeats..
Phone is on android 8 with may security patch ... PLEASE HELP.. And thanks..
if memory serves you need to:
- while the phone is booting - once the Samsung logo starts appearing, press and hold "volume down + power button"
if it doesn't reboot then try playing around with your timing - when to start pressing both buttons.
if you get the timing right the phone should reboot into download mode form where you can flash the latest stock ROM
--
I've gotten myself into many a boot loop while flashing ROM's that didn't "sit well" with my SM-G9500.
Hi,
As in the topic, I have J510FN who does not want to turn on. Displays the logo of the galaxy J5 2016 and even without showing the next Samsung logo it resets and the galaxy logo pops up again.
I tried hard reset then uploading a new software by odin.
The upload was successful, however, 32% of "installing system update" pops up "Erasing", the phone resets and the galaxy logo pops up, after a while the phone turns off. When I turn it on, everything goes back to the starting point, ie in the circle the logo galaxy -> reset after a moment and again the logo galaxy.
Recovery mode works, the bootloader works. The phone responds to the start-up and does not want to "go" further, ie to the Samsung logo and turn on.
Please, help, maybe it's an android problem, not a software? I do not know what to do
skailer213 said:
Hi,
As in the topic, I have J510FN who does not want to turn on. Displays the logo of the galaxy J5 2016 and even without showing the next Samsung logo it resets and the galaxy logo pops up again.
I tried hard reset then uploading a new software by odin.
The upload was successful, however, 32% of "installing system update" pops up "Erasing", the phone resets and the galaxy logo pops up, after a while the phone turns off. When I turn it on, everything goes back to the starting point, ie in the circle the logo galaxy -> reset after a moment and again the logo galaxy.
Recovery mode works, the bootloader works. The phone responds to the start-up and does not want to "go" further, ie to the Samsung logo and turn on.
Please, help, maybe it's an android problem, not a software? I do not know what to do
Click to expand...
Click to collapse
Try flashing another kernel like quasar and if it still doesn't boot probably the software.You could try flashing another rom to see if it boots if quasar doesnt boot it.Failing that you probably need to install firmware again with odin
HD 10 (2017) boot looping at "Installing system update". Anyway to force it to stop?
I decided to root my 5.6.0.1 and then my intention was to update it to 5.6.2.0 and then root it again. That seems to be a mistake, due warning for future people. Right now my tablet is booting into "Installing system update", the progress bar goes like a mm and then it reboots back into the same screen a split second later.
I tried to get into recovery by holding the volume buttons and power but it still boots into the same "Installing system update" screen. Anyone know what else I can try? Is there a way to get it to stop updating or a way to get it to factory reset itself via ADB or something? Anything I can try here?
Thanks!