Help with this Chinese 9.7" Tesla style Screen android 8.1 - Android Head-Units

hi frind
i Brick my Head Unit
i need update sotware please
Android:SD8227_HW:1.0_SW:0.3.4_20191028
system:8.1 kenal 3.4.35
DDR: 2G FLASH: 32G
cpu: AEMv7 Processor rev 3(v71) X4
Display: 768*1024(6 bits)
CAN: BNR2 Cruze/Malibu-V12.7.7-Connected
MCUI: HW8227-0.1 - SWD-6.6

Related

Vertical Screen 10.4 Chinese Unit

Hello guys! I have a 10.4 vertical screen chinese unit with the specs mentioned below, mounted on a opel astra j from 2016. My android has bugs (at some times the apps are starting by themselves, without anyone press the touchscreen) and i was wondering if someone can send me a good android firmware and tells me how to replace the bugged android. Thanks in advance!
Android: SD8227_HW:1.0_SW: 0.3.4_20180604
System: 4.4.2 kenel> 3.4.35
DDR: 1Gb FLASH: 32GB
cpu: ARMv7 Processor rev 3 (v71) x 4
display: 768 x 1024 (6 bits)
CAN: BNR-old Excelle(H)-V12.0-Connected
MCU1: HW8227-0.1-SW0-6.6
CanVersionInfo: BINARY BK V209

8227L updated

Hello. Please update to my device? Thank you:
Android: YTO216BF 00002 VO04 20190911
Android OS: Android 8.1 Go
XY AUTO: 3.1 (822)
CAN BUS: 3.0 (8227L)
DDR: 2G FLASH: 32G
cpu: A7 1.3g Hz 4x
Display: 1024x600
MCU: 3.1 (8227L)
try this : https://yadi.sk/d/OnT3TUlUtsnm6g
unfortunately does not work

need a rom Kirinavi

Hi guys
are you able to help me find the correct rom for my device please??
I have to put a pin in each time to boot,
my system is:-
Kirinavi
Android: YT9216CH_AHD_00005_V004_HIFI
Android os: Android 9.1
XY AUTO: B6.2 (X2)
CAN Pro: BNR-OLD English high with-V2.20.9-connect
DDR: 2g FLASH: 32GB
cpu A7 1.3GHz x4
Amplifier AC7315 MOS bile duct 50W X 4
display 1024*768( 6 bits)
MCU: 3.5 (X2)
thank you guys......
*****BUMP*****
*************************BUMP*********************************
please help
:fingers-crossed::fingers-crossed:

Upgrading Android Head Unit YT9216B_00002_V004_20191009

Hello,
Please forgive me if this is a repost or not posted in the right section.
I want to upgrade my android head unit from Stock OS 9.1 to a better version. Not sure if there is any available, hence writing in to the experts. I am attaching the details below:
Android: YT9216B_00002_V004_20191009
Android OS: Android 9.1 XY Auto: 3.1 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH: 16G
CPU: A7 1.3 GHz x 4
Display: 1024*600
MCU: 3.1 (8227L)
Hope this helps....Looking forward to your response.

Android radio Tesla style help

I have a android Tesla style radio. I tried to update it but chose the wrong firmware not it messed up I’m to get the old firmware back
Android: SD8227_HW:1.0_SW:0.3.4_20180704
system: 7.0
kenel 3,4.35
cpu: ARMv7 Processor rev 3 (v7I) X4
display: 768*1024(6 bits)
CAN: BNR-Old lacrosse(H)-V12.0-Connecte
MCU1: HW8227-0.1-SWO-6.6
CanVersion info: BINARY BK V216

Categories

Resources