Hello guys! I have a 10.4 vertical screen chinese unit with the specs mentioned below, mounted on a opel astra j from 2016. My android has bugs (at some times the apps are starting by themselves, without anyone press the touchscreen) and i was wondering if someone can send me a good android firmware and tells me how to replace the bugged android. Thanks in advance!
Android: SD8227_HW:1.0_SW: 0.3.4_20180604
System: 4.4.2 kenel> 3.4.35
DDR: 1Gb FLASH: 32GB
cpu: ARMv7 Processor rev 3 (v71) x 4
display: 768 x 1024 (6 bits)
CAN: BNR-old Excelle(H)-V12.0-Connected
MCU1: HW8227-0.1-SW0-6.6
CanVersionInfo: BINARY BK V209
Related
Hey folks,
i've just bought a new Headunit and can't find any information about it. Maybe someone knows this type. This is what hardware-info says:
TS356XKUDO EVB3561SV_W_65_M0
SYSTEM (Android 6.0)
Model: evb3561sv_w_65_m0
Manufacturer: TS356XKUDO
Device: evb3561sv_w_65_m0
Product: full_evb3561sv_w_65_m0
Brand: alps
Android Version: 6.0
API Level: 23
Build ID: MRA58K
DISPLAY (1024x600)
Size: 1024x600
Refresh Rate: 57,44 Hz
Default Orientation: Landscape
Physical Size: 4,95" (12,56 cm)
Logical Size: Normal
Density: 240 dpi (High)
Pixels Per Inch: X: 240; Y: 240
PROCESSOR (AArch64)
Processor: AArch64 Processor rev 4 (aarch64)
Cores: 4
Max Frequency: 1248 Mhz
Instruction Sets: arm64-v8a,
SIMD Instructions: Not Supported
MEMORY (1901 MB)
System RAM: 1901 MB
JVM Max Memory: 128 MB
Internal Storage: 11266 MB
External Storage: 11266 MB (Emulated)
About device says:
MCU: TS907.170330
Same head unit
Hi.I have the same head unit.I also searching a different rom.Havr you find anything?
Me too, someone have an idea about rooting this unit ??
Update
Hello
please have a chance to update the TS356XKUDO software.
Has anyone already updated?
thx George.
I have a device having mcu: ts907.180712 and running with android v 6.0 showing model no. 8227l. can we install any custom recovery to backup the system in recovery mode and if yes please help in detail process
hppatro said:
I have a device having mcu: ts907.180712 and running with android v 6.0 showing model no. 8227l. can we install any custom recovery to backup the system in recovery mode and if yes please help in detail process
Click to expand...
Click to collapse
I have a very similar unit. In fact, as far as I can tell the specs are exactly the same.
The only difference being the manufacturer tag.
See here: https://forum.xda-developers.com/an...s/help-android-6-unit-identification-t3858386.
Hi Everyone,
I just bought a Chinese android head unit but the User Interface of the unit is not appealing and does have show much information about the device itself under settings (In Fact it doesn't even have the field "ABOUT DEVICE"). Also it does not have any option to update the Car Logo I was able to access CAN settings but there is nothing there about updating the logo.
Below mentioned are the details of my device.
ANDROID: SD8227_HW:1.0_SW:0.3.4_20171110
System: 6.0
DDR: 2GB
FLASH: 16GB
CPU: ARMv7 Processor rev 3 (v71) X 4
DISPLAY: 1024*600
MCU1: HW8227-0.1 -SW0-6.6
Kind Regards.
update
use this link
https://forum.xda-developers.com/an...ts/sd8227-hw1-0-software-2018-rooted-t3875527
hi frind
i Brick my Head Unit
i need update sotware please
Android:SD8227_HW:1.0_SW:0.3.4_20191028
system:8.1 kenal 3.4.35
DDR: 2G FLASH: 32G
cpu: AEMv7 Processor rev 3(v71) X4
Display: 768*1024(6 bits)
CAN: BNR2 Cruze/Malibu-V12.7.7-Connected
MCUI: HW8227-0.1 - SWD-6.6
A freind of mine gave me an Android Radio it's a Lenovo D1 I cannot get into basic settings can't even add google account and no playstore what so ever can't locate the manufacture it has the new allwinner T7 P1 which is a 6 core platform but radio says it's a quad core also radio says it's a android 8.1 but cpu-z says it's a 7.1 it came with a 360 camera view i want to be able to upgrade this unit to new MCU and higher version of android or at least 8.1 any ideas? This radio looks exactly like the Ownice C900 so maybe i can use their firmware both radios have the same specs except mine has speaker level outputs and theirs has line level outputs
cmgp01 said:
A freind of mine gave me an Android Radio it's a Lenovo D1 I cannot get into basic settings can't even add google account and no playstore what so ever can't locate the manufacture it has the new allwinner T7 P1 which is a 6 core platform but radio says it's a quad core also radio says it's a android 8.1 but cpu-z says it's a 7.1 it came with a 360 camera view i want to be able to upgrade this unit to new MCU and higher version of android or at least 8.1 any ideas? This radio looks exactly like the Ownice C900 so maybe i can use their firmware both radios have the same specs except mine has speaker level outputs and theirs has line level outputs
Click to expand...
Click to collapse
What is your current MCU?
Can you share the system info of your unit?
Currently, only android 7.1 is available for ownice k5/c900
tribalfs said:
What is your current MCU?
Can you share the system info of your unit?
Currently, only android 7.1 is available for ownice k5/c900
Click to expand...
Click to collapse
This is the info from the Unit
APPVER: K2301D_MD_S112201.20191031.10442564.01
PLATFORMVER: K23-2019/09/29[15:31:42]-1.01
MCUVER: V2.0-FF01-20190525-A02-CAN0009-09-00-00000000000-00
BTVER:GOCBC8_V2.0/2018-05-23:10:24:46
CANAPPVER: v.19.10.23A [15:00] [c.15]
Android Version: 8.1
This is info from CPU-Z
CPU Architecture: ARM Cortex 7
Cores: 6
GPU Vendor: Arm
GPU Renderer: Mali-400 MP
Scaling Governor: Unknow
Model: QUAD-CORE T7P1 (K2301D_MD_S112201
Manufacturer: AllWinner
Board: exdroid
Display: K2301D_MD_S112201.20191031.10442564
Hardware: sun8iw17p1
Android Version: 7.1.1
Kernel Architecture: armv7l
Kernel Version: 3.10.65 (20190929)
Screen resolution in pixels: 1024 x 600
Screen resolution in dp: 1024 x 600
total Ram: 2048 Mb
Internal Storage: 1.33 Gb
Root Access: yes
Info From Carwebguru
MCU: Unknow Android 7.1.1
Screen: 1024 x 600
Memory: 2.1 Gb
Brand: Allwinner T7p1
Model: Quad Core t7p1
Very Conflicting info from 3 different sources.
Hope this helps
cmgp01 said:
A freind of mine gave me an Android Radio it's a Lenovo D1 I cannot get into basic settings can't even add google account and no playstore what so ever can't locate the manufacture it has the new allwinner T7 P1 which is a 6 core platform but radio says it's a quad core also radio says it's a android 8.1 but cpu-z says it's a 7.1 it came with a 360 camera view i want to be able to upgrade this unit to new MCU and higher version of android or at least 8.1 any ideas? This radio looks exactly like the Ownice C900 so maybe i can use their firmware both radios have the same specs except mine has speaker level outputs and theirs has line level outputs
Click to expand...
Click to collapse
cmgp01 said:
This is the info from the Unit
APPVER: K2301D_MD_S112201.20191031.10442564.01
PLATFORMVER: K23-2019/09/29[15:31:42]-1.01
MCUVER: V2.0-FF01-20190525-A02-CAN0009-09-00-00000000000-00
BTVER:GOCBC8_V2.0/2018-05-23:10:24:46
CANAPPVER: v.19.10.23A [15:00] [c.15]
Android Version: 8.1
This is info from CPU-Z
CPU Architecture: ARM Cortex 7
Cores: 6
GPU Vendor: Arm
GPU Renderer: Mali-400 MP
Scaling Governor: Unknow
Model: QUAD-CORE T7P1 (K2301D_MD_S112201
Manufacturer: AllWinner
Board: exdroid
Display: K2301D_MD_S112201.20191031.10442564
Hardware: sun8iw17p1
Android Version: 7.1.1
Kernel Architecture: armv7l
Kernel Version: 3.10.65 (20190929)
Screen resolution in pixels: 1024 x 600
Screen resolution in dp: 1024 x 600
total Ram: 2048 Mb
Internal Storage: 1.33 Gb
Root Access: yes
Info From Carwebguru
MCU: Unknow Android 7.1.1
Screen: 1024 x 600
Memory: 2.1 Gb
Brand: Allwinner T7p1
Model: Quad Core t7p1
Very Conflicting info from 3 different sources.
Hope this helps
Click to expand...
Click to collapse
Except for the processor, looks like your unit have a different set of hardware . I think you can't flash the firmware from ownice c900 specially the mcu. It will break your device.
I have a android Tesla style radio. I tried to update it but chose the wrong firmware not it messed up I’m to get the old firmware back
Android: SD8227_HW:1.0_SW:0.3.4_20180704
system: 7.0
kenel 3,4.35
cpu: ARMv7 Processor rev 3 (v7I) X4
display: 768*1024(6 bits)
CAN: BNR-Old lacrosse(H)-V12.0-Connecte
MCU1: HW8227-0.1-SWO-6.6
CanVersion info: BINARY BK V216