I have installed all the drivers needed and my devices have been connected, but after I enter Fastboot mode and I plug the computer and then open the mi unlock tool, my devices are immediately not detected. is there a solution to this problem?
Test an other usb port not 3.0.
You can see here
https://forum.xda-developers.com/redmi-note-7/help/unable-to-unlock-bootloader-t4046611
Related
Hey guys i'm trying to unlock bootloader and flash the latest version but my devices is not recognised in fastboot. I do have the Android Bootloader Interface show up in drivers but when I use the command /adb devices, nothing show up in the list. In fastboot I have "Connect USB Data Cable" text but no matter how many times I had it replug or switch USB, the same error. I'm pretty sure there's nothing wrong with the cable because I can use it in normal mode.
I have installed all drivers and did all the obvious tricks like driver signature, installing adb drivers and extracting xioami tool to C drive. The issue is whenever i use 'cmd' in phone's fastboot mode, then i can see the phone alongside its serial number but whenever i open xiaomi unlock tool, then it dissapears and doesnt show up neither in the tool nor in cmd box.
Can anyone help?
Open xiaomi tool then plug the phone on fastboot mode after
Gonime said:
Open xiaomi tool then plug the phone on fastboot mode after
Click to expand...
Click to collapse
I had also tried to plug my phone after opening mi unlock tool. N see it doesn't work. Neither my phone shows in cmd nor in mi tool even my pc doesn't recognize anything after plugging cable.
But as I close mi tool again it starts showing in cmd
Is there aren't different versions of xiaomi tools ? maybe with a newer or older version ?
other usb port?
other pc ?
Have you made all the things in dev mode on your phone ?
EDIT : maybe it can help
Whenever I go to fastboot the computer recognizes the phone but as soon as I open Mi Unlock Tool or MiFlash Tool, the device disconnects and a message appears on the corner of the screen saying to press the volume buttons to turn off the device, nor the Mi Unlock nor MiFlash detects the device, could anyone help me?
I tried to install the qualcomm usb drives, tried different versions of Mi Unlock/PC Suite and nothing works
Hexvessel1992 said:
Whenever I go to fastboot the computer recognizes the phone but as soon as I open Mi Unlock Tool or MiFlash Tool, the device disconnects and a message appears on the corner of the screen saying to press the volume buttons to turn off the device, nor the Mi Unlock nor MiFlash detects the device, could anyone help me?
I tried to install the qualcomm usb drives, tried different versions of Mi Unlock/PC Suite and nothing works
Click to expand...
Click to collapse
I have the same issue. Driver installed with miflash_unlock. When i start the Fastboot the driver isnt found.
Have you tried opening Mi Flash as admin on Windows?
worked with me buying a USB hub, I don't know if it's a problem with the motherboard usb drivers, but with the hub the mi flash and unlock tool
detect the device now, you can buy one of these cheap hub with 4 usb ports
Almost a month ago, my phone ran out of battery so I charged it. When I got back, there was a warning sign and below it said: "the system has been destroyed"
I tried everything I could to flash it, included the official Xiaomi flash tool, but the problem isn't the method itself, but the phone, which it's not being recognized by my pc at all.
When I connect it (In fastboot mode), a notification shows up saying: "The USB device is not recognized", I tried commands, updating the drives, cleaning up the USB port, another USB cable, but nothing worked.
Does anyone know any possible solution for this? Thanks in advance : D
faulty usb cable may be the reason and try edl mode
MrHarveen said:
faulty usb cable may be the reason and try edl mode
Click to expand...
Click to collapse
I have already tried with other cables (and all of them are working for everything except this, so it's the device's fault), and edl mode can only be activated with a computer, so i guess i'll keep trying
Drivers must have been installed multiple times.Delete them and reinstall.
Cheers.
Same problem bro
Hi!
There is a way to enable EDL mode without computer but you'll have to open your phone.
Once opened, you must short two specific test points while connecting USB.
That's how I got out of a bootloop with a locked bootloader.
For the procedure just search for "edl test point mi a1", there are many videos.
Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
pogradecari said:
Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
Click to expand...
Click to collapse
Try holding power+volup+voldown with the phone unplugged from a computer.
If it doesn't work, let me know.
how to boot to edl mode ??
Try this :
Install ADB and Minimal Fastboot drivers through which Windows will recognize your Device.
Enable USB Debugging on your Android Device. You can do this simply by following the given direction:
Settings > About Phone > tap 7 times on the Build Number. This will enable Developer options on it.
Now, again go back to the main Settings > Developer options > USB Debugging and Enable it.
Connect your smartphone with your PC via a USB cable.
Open Command Window by the press and hold Shift Key + right-click of your Mouse.
Choose Open Command Window here.
Type the following command and press the Enter button to check whether the device is connected or not.
" adb devices "
You will see a device serial code on the screen. That means it is successfully connected. Then follow the next step.
Type the command from below and hit enter to Boot into Download Mode (EDL Mode):
" adb reboot edl " or "fastboot oem edl" or "fastboot reboot-edl" or "fastboot reboot edl"
muppetz said:
Try this :
Install ADB and Minimal Fastboot drivers through which Windows will recognize your Device.
Enable USB Debugging on your Android Device. You can do this simply by following the given direction:
Settings > About Phone > tap 7 times on the Build Number. This will enable Developer options on it.
Now, again go back to the main Settings > Developer options > USB Debugging and Enable it.
Connect your smartphone with your PC via a USB cable.
Open Command Window by the press and hold Shift Key + right-click of your Mouse.
Choose Open Command Window here.
Type the following command and press the Enter button to check whether the device is connected or not.
" adb devices "
You will see a device serial code on the screen. That means it is successfully connected. Then follow the next step.
Type the command from below and hit enter to Boot into Download Mode (EDL Mode):
" adb reboot edl "
Click to expand...
Click to collapse
my phone is bricked while flashing stock rom via fastboot
so unable to boot to recovery or bootloader
To begin with, power off your device. If you can’t do so, then you will have to wait until the battery completely drains out.
Now connect one end of the USB cable to your PC, but don’t attach the other end to the device.
Press and hold the Volume Up and Volume Down buttons together for a few seconds.
Now connect the other end of the device to the USB cable.
Your device will now be recognized as Qualcomm HS-USB QDLoader 9008. You may now flash the device-specific firmware to unbrick it.
Even you have a black screen , PC does recognize your phone . Use only a USB 2.0 port . Verify if Qualcomm USB Driver have been installed on Windows .
muppetz said:
To begin with, power off your device. If you can’t do so, then you will have to wait until the battery completely drains out.
Now connect one end of the USB cable to your PC, but don’t attach the other end to the device.
Press and hold the Volume Up and Volume Down buttons together for a few seconds.
Now connect the other end of the device to the USB cable.
Your device will now be recognized as Qualcomm HS-USB QDLoader 9008. You may now flash the device-specific firmware to unbrick it.
Even you have a black screen , PC does recognize your phone . Use only a USB 2.0 port . Verify if drivers have been installed on Windows .
Click to expand...
Click to collapse
tried these steps but phone goes in 900E mode
OK , look then at this :
muppetz said:
OK , look then at this :
Click to expand...
Click to collapse
it does not work as he just changed the drivers from diagnostic mode to qdloader mode
pogradecari said:
Hello there members.
i have a Nothing Phone 1 in Edl Mode. Tried to restart it but still connected on Edl. i have searched around for this problem but sill unlucky to find a solution.
Client pretend to have played with roms and flashed the wrong one.
Any help suggestion?
Click to expand...
Click to collapse
Maybe it's too late already but you can unbrick the phone with this tool
Unbrick / Flash Stock Rom (1.1.7 global) QDLoader 9008 fix | EDL Mode fix
Hi everyone, If your phone (1) does not react on any of yours actions. You may have the same problem. This is an instruction how to fix it without Disassembly. ‼️ Do this at your own risk, I am not responsible for any damage that may occur to...
forum.xda-developers.com
none of these will work
pogradecari said:
none of these will work
Click to expand...
Click to collapse
Why? Have you tried?