Hello,
I'm using Samsung Galaxy S10+ with BeyondRom and DBT CSC.
In cscfeature.xml there is an option to enable VIPMode. What is necessary to get this Mode working properly?
Thanks for your help.
Related
Do you know galaxy s5 csc THL suport volte?
if it supports,you tell me bow to enable.
Mydevice SM-G900F Thailand but I port "ROM [G900F/M/I/L/K/T/S/W8][5.1.1] V5.1 TW REVOLUTION S5 (S6E +NOTE 5) Xposed by rahul1533"
kitti997 said:
Do you know galaxy s5 csc THL suport volte?
if it supports,you tell me bow to enable.
Mydevice SM-G900F Thailand but I port "ROM [G900F/M/I/L/K/T/S/W8][5.1.1] V5.1 TW REVOLUTION S5 (S6E +NOTE 5) Xposed by rahul1533"
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Your thread will be moved to S5 Q&A,Help and Troubleshooting.You'll get support from the experts there
___
v7
XDA Assist
thx
I did a fresh install of AUT csc version. Through odin.
Still in not getting Volte option.
Is thir something im missing.
Help.
In custom xls i see volte text and in others xls alsi see volte text wirtten
I have a S7 Edge from UAE that I have flashed with UK Vodafone firmware. Now since all Vodafone firmware is MultiCSC this has set the CSC as VD2 (Which is German Vodafone) when I want VOD (UK Vodafone). I have searched all over the internet for info into how to set a specifc CSC in MultiCSC firmware but cannot seem to find the answer. I have already tried the following suggestions:
1) Go to recovery immediately after flashing from ODIN
2) Use recovery to clear cache
3) Hard Reset in Recovery
4) Hard Reset from Settings menu
5) the *#272*IMEI# trick (this does not work on the S7)
Any help would be greatly appreciated as I want to have the correct CSC to use Wifi Calling and VoLTE. Thanks.
Using *#272*IMEI# worked for me on my Canadian S7 edge. It might be that after flashing this feature doesn't work anymore - it happened on my Note 5, worked initially, but after tripping Knox it wouldn't work (even on stock).
dragon_soft said:
I have a S7 Edge from UAE that I have flashed with UK Vodafone firmware. Now since all Vodafone firmware is MultiCSC this has set the CSC as VD2 (Which is German Vodafone) when I want VOD (UK Vodafone). I have searched all over the internet for info into how to set a specifc CSC in MultiCSC firmware but cannot seem to find the answer. I have already tried the following suggestions:
1) Go to recovery immediately after flashing from ODIN
2) Use recovery to clear cache
3) Hard Reset in Recovery
4) Hard Reset from Settings menu
5) the *#272*IMEI# trick (this does not work on the S7)
Any help would be greatly appreciated as I want to have the correct CSC to use Wifi Calling and VoLTE. Thanks.
Click to expand...
Click to collapse
aleks07 said:
Using *#272*IMEI# worked for me on my Canadian S7 edge. It might be that after flashing this feature doesn't work anymore - it happened on my Note 5, worked initially, but after tripping Knox it wouldn't work (even on stock).
Click to expand...
Click to collapse
The thing is that flashing the firmware using ODIN shouldn't and hasn't tripped KNOX its still 0x0
There must be some way of setting the CSC from a multiCSC firmware, how else do the operators set theirs.
Does the dual sim feature still work now that you've flashed a non dual sim firmware
aleks07 said:
Using *#272*IMEI# worked for me on my Canadian S7 edge. It might be that after flashing this feature doesn't work anymore - it happened on my Note 5, worked initially, but after tripping Knox it wouldn't work (even on stock).
Click to expand...
Click to collapse
There are two versions of S7 edge: Snapdragon powered and Exynos powered. On Exynos powered S7 edge, the code is not working.
---------- Post added at 01:58 PM ---------- Previous post was at 01:57 PM ----------
nkarim said:
Does the dual sim feature still work now that you've flashed a non dual sim firmware
Click to expand...
Click to collapse
Multicsc does not mean dual sim
someone post this instruction from the csc changer utility thread, I followed it and manage to change THL(Thailand multi csc fw) to XCT (unbranded Philippines fw) but I think it's just feels "artificial" to me even though I've got my country specific changes and when using Phone Info app it says XCT but when I try to use Smart Switch on PC it says my CSC is still PHN which I downloaded from the official firmware thread. :/
here's the link:
http://forum.xda-developers.com/note-4/help/guide-to-change-csc-root-rom-multi-csc-t3017207
Thanks, but I don't want to root my phone.
Hey Guys,
Since my phone was purchased from the UAE, VoLTE is disabled. I would like to change the CSC to any that has VolTE & Wifi calling enabled. The "About Phone" section shows my model to be "SM-G935FD" whereas the PhoneINFO app shows it to be "SM-G935F". Are they the same? PhoneINFO also shows my FW & Active CSC to be XSG & available CSC Codes are:
ACR,AFG,AFR,BTC,DKR,DRC,ECT,EGY,KSA,LYS,MAT,MID,MRT,MRU,MTZ,MWD,PAK,SMG,THR,TMC,TUN,TUR,WTL,XFA,XFE,XFM,XFU,XSG.
Im on 6.0.1 and was wondering if I can change it to the following UK Nougat :
https://www.sammobile.com/firmwares/download/120208/G935FXXU1DPLT_G935FOXA1DPLT_BTU/
or this Indian 6.0.1 at least:
https://www.sammobile.com/firmwares/download/114162/G935FXXU1BPJJ_G935FODD1BPJJ_INS/
Thank you
If you need VoLTE and WiFi calling. You need to flash INS csc. Backup your data and make a factory reset and wipe cache. This will also fix the CSC as active which provides VoLTE and WiFi calling.
Sent from my SM-G935F
Thanks for the reply, Siva. So I can flash INS even though it's not mentioned under "available CSC Codes" in my phone? If I wanted to get the nougat, can I flash the UK firmware I have mentioned ?
Thank you
RanMN said:
Thanks for the reply, Siva. So I can flash INS even though it's not mentioned under "available CSC Codes" in my phone? If I wanted to get the nougat, can I flash the UK firmware I have mentioned ?
Thank you
Click to expand...
Click to collapse
Yes you can flash UK nougat on sacrificing VoLTE and WiFi calling.
Sent from my SM-G935F
I already install indian csc but volte not working
You could flash UK nougat, EVR (EE UK) has VoLTE.
Hi, I have Galaxy S8+ SM-G955F with product code (CSC) MAX. This is for SM-G955F from Austria (T-Mobile), and Android v7.0.
I want to flash Oreo on my phone with CSC SEE. What need to do execly. I read samwhere that is not possible to flash unbranded firmware on verzion. I download S8 plus Oreo SEE ( south east europe) and what I need to do. I know enter to download mode, run Odin and chose this four files BT, CP, PDA and CSC , I think to not chose HOME CSC because want to change it to SEE. Please can someone help and tell me is it right and can I do it without any demage. Thanks
i have s8 plus with build number SM-G955FD in about phone, but in download mode mode number is SM-G955N (KOREA) how can?
and if enter download mode language default is korean language
now i want to flash my phone to firmware in indonesia its possible?
please help
thanks very much
briandanaa said:
i have s8 plus with build number SM-G955FD in about phone, but in download mode mode number is SM-G955N (KOREA) how can?
and if enter download mode language default is korean language
now i want to flash my phone to firmware in indonesia its possible?
please help
thanks very much
Click to expand...
Click to collapse
Download firmware from updato/samfirm, flash through odin