Related
I'm pretty sure the following tip is accurate. I received yesterday a new HD, my first having broken just by pressing the screen! I was very relieved that just by reinstalling from memory card all my apps, that the apps settings were still valid - I didn't fancy having to go all through setting up tomtom again with pocketgps camera database and warning tones.
However I did notice that after switching Tomtom on, it was hit and miss whether my unit found any satellites. By going into the satellite status screen, I could see that the software would access the satellites for a few seconds then lose them again. I also noticed that a fix for this was to run google maps first and turn on gps from there.
This was strange, since my previous HD, locked on within seconds every time. Hardware issue? Maybe, but thought I'd try to remember anything I hadn't done on my new HD that I had on my old.
"Ha-Ha" I thought, I haven't run the connection wizard, and this is sort of a connection issue.
Start --> Settings ---> Connection ----> Connection Set Up-----> Tap O.K. ----> restart
Now TomTom works perfectly and picks up connections immediately without google map initiation.
Try it if you having similar troubles!
cheers,
mooro
For me this must be a placebo, neither do I understand why the connection setup has anything to do with the gps chipset, nor does it work me. I have configured my connection using the connection setup and nevertheless I have some gps drops with iGO.
I think this gps drops have some other background, I will try a new radio version. Some people also said that it might help to change the polling interval, but for me neither an increase nor a decrease of the interval has changed anything about it.
Not a placebo for me, is working perfectly now.
mooro1973 said:
Not a placebo for me, is working perfectly now.
Click to expand...
Click to collapse
Nobody has said that placebos don't work, but the reason why they work is controversial. Maybe you have done something else, because I really can't imagine how the connection setup could fix a problem with the gps.
However, its good to know that it runs for you, maybe it will work for me with the new radio also.
How about this theory:
Because you did not do the connection setup yet, the GPS Quickstart had not run yet. So no almanac of GPS satelite data existed yet, meaning it was an icecold start?
And Google Maps worked faster because it is using the 'about' position of the GPS towers to bootstrap the location?
Placebo works only for those that believe in it!
This device is A-GPS capable.
Don't know whether e-plus supports A-GPS services but in theory this might be a clue
I have tried all of the above and still I cannot get GPS to work
If I open google maps it just keeps searching with indicayor showing no satellites.
When using TomTom it displays a number of satellites but all appear grey and none become active
Advice welcome
Fallen Spartan said:
Advice welcome
Click to expand...
Click to collapse
It may be too obvious to mention, but: Did you try this outside with a good sky view? Cold start is always a bit more tricky.
Fallen Spartan said:
I have tried all of the above and still I cannot get GPS to work
If I open google maps it just keeps searching with indicayor showing no satellites.
When using TomTom it displays a number of satellites but all appear grey and none become active
Advice welcome
Click to expand...
Click to collapse
have you tried start ---> settings ----> external gps --->access---> check manage gps automatically?
and in google maps, options-->gps settings---> toggle auto/windows?
I am fairly sure intermittent gps is a memory problem of some sort. I used to get that a lot running IGO. Now I kill TouchFlo every time before running IGO, and even thought the problems still happens sometimes, it is clearly much less often. You can find the description of how to kill TouchFlo using Mort script in IGO thread. This makes the whole thing clearly better (not perfect).
mooro1973 said:
have you tried start ---> settings ----> external gps --->access---> check manage gps automatically?
and in google maps, options-->gps settings---> toggle auto/windows?
Click to expand...
Click to collapse
It may be too obvious to mention, but: Did you try this outside with a good sky view? Cold start is always a bit more tricky.
Click to expand...
Click to collapse
Tried both of these.
Yes I can see that satellites are being picked up but both google maps and tomtom don't fix onto any of them. They all just appear grey
Maybe you should try a tool by htc to try and wakeup your gps. Run the file on your HD and from function menu select chip and then q7200. Choose port 4 and baud rate 4800. Then open the port and wait for a gps fix. After that close the port and exit the gps tool. Then run your gps navigator and see if it works!
Hi,
I had issues with GPS and tomtom 7.
I discovered that it was caused by a modification I did to the registry with HD Tweak.
Here is what I did:
going thru the settings with HD Tweak I seen that default value for AGPS was Disabled so I decided to set it to enabled it as I now the phone is capable of it.
After that The GPS would only work once with tomtom, if I closed tomtom and re open it again it GPS would not be found, I had to reboot the phone for it to work again (for an other single use).
I restored the AGPS value to Disable with HD Tweak and everything worked perfectly after.
Though I noticed that tomtom will still use AGPS when GPS sensor is down, but I can say if this is how it used to worked before the registery tweak because I did the tweak immediately after installing tomtom.
I had a similar problem with Advanced Config after I turned on Quick GPS Fix, turning it off seemed to fix it.
michael_r said:
I am fairly sure intermittent gps is a memory problem of some sort.
Click to expand...
Click to collapse
I don't think so. My "fix" (as I reported in another thread) is to change baudrate in IGO GPS configuration. After one or few baudrate change, the connection is stable.
No one as reported this fix not working.
So it seem a virtual COM port issue..
rushmpeg said:
Hi,
I had issues with GPS and tomtom 7.
I discovered that it was caused by a modification I did to the registry with HD Tweak.
Here is what I did:
going thru the settings with HD Tweak I seen that default value for AGPS was Disabled so I decided to set it to enabled it as I now the phone is capable of it.
After that The GPS would only work once with tomtom, if I closed tomtom and re open it again it GPS would not be found, I had to reboot the phone for it to work again (for an other single use).
I restored the AGPS value to Disable with HD Tweak and everything worked perfectly after.
Though I noticed that tomtom will still use AGPS when GPS sensor is down, but I can say if this is how it used to worked before the registery tweak because I did the tweak immediately after installing tomtom.
Click to expand...
Click to collapse
Yeah !!! Seems to work on my side !! I just spent minutes fighting with my HD this afternoon, still loosing the GPS device... I had to activate one other GPS app to make it work. Now I just changed this setting and it seems to work !!
Thanks for the info ! You're my king
Worked for me by turning off a-gps in HD Tweak and enabling it through the gps app on the rom.
after flashing the 1.10.25.25 radio on my HTC diamond, The GPS signal goes on and off, on and off....continuously on the TomTom GPS status. it was strange, I have to use QuickGPS to download the data again on open air to get the signal on continuously again. If I download the data inside my house, it just go on and off again when I use it on open air.
The root of the last update made me to do many mistakes and I had to initialize my kindle. Again the hard work of installing and tricking old programs that worked well.
All fine until I tried my bluetooth GPS dongle. With the other versions of rom it was rejected as an unsupported device, stopping pairing after a few seconds, needing other utilities to make the pairing stable. Now it paired well, at first try, but on the other side "Bluetooth GPS Provider" by Mobilej.de, the app that used to work, now crash all the time. This app used to work perfectly if installed in the System folder /app and annulling the "Force GPS Position" option, but not now.
Other app with the same name but from Michael Chourdakis(TurboIRC.com), that refused to work with 7.2.3, now runs, although is a more basic program.
Does it happens to someone else?
gflorezarroyo said:
The root of the last update made me to do many mistakes and I had to initialize my kindle. Again the hard work of installing and tricking old programs that worked well.
All fine until I tried my bluetooth GPS dongle. With the other versions of rom it was rejected as an unsupported device, stopping pairing after a few seconds, needing other utilities to make the pairing stable. Now it paired well, at first try, but on the other side "Bluetooth GPS Provider" by Mobilej.de, the app that used to work, now crash all the time. This app used to work perfectly if installed in the System folder /app and annulling the "Force GPS Position" option, but not now.
Other app with the same name but from Michael Chourdakis(TurboIRC.com), that refused to work with 7.2.3, now runs, although is a more basic program.
Does it happens to someone else?
Click to expand...
Click to collapse
Yes hello, this exact same thing is happening for me...
Prior to this new firmware update, I had been using a Global Sat external gps with Bluetooth GPS Provider (Mobilej.de) and it had successfully connected and gained location activity, after enabling mock settings with "KFHD xSettings", for use with maps applications (in my case for aviation moving maps Avare & Air Navigation Pro). Now with the recent 7.3.0 update, this no longer works and the Bluetooth provider app immediately has lost connection and is stopped. Additionally, these apps continually tell me that location-provider setting is turned off, even though it is shown as "ON".
Have you found a work around yet for this update? Are you saying that the other app by Michael Chourdakis is working and providing gps connection?
Yes, it fails one or two times to connect, you must insist. Then suddenly, it links and begins to receive coordinates and stay connected properly.
You must let it in the background like the other app.
Now, way to home, I will prove its accuracy...
I forgot the link to the app:
https://dl.dropbox.com/u/54456659/turboirc.btgps.apk.zip or http://ubuntuone.com/3yq3ZJKWIvB7Rss37BFE1k
edit: (thanks to prokennexusa)
hello thanks for the app link!
I just tried it after installing in \system\app folder. it does establish connection and says it receives coordinate information, but when I open map applications they say no location available. Or no GPS service.
Are you getting the same? have you successfully used a gps application with your bluetooth dongle?
It is not necessary to install it in System/app but if it works for you...., Once you see the name of the dongle and the coordinates, you must exit with the home button, not with the arrow one, to make the app run in the background. Edit: no, it doesn't closes by itshelf. Is necesary to stop it in configuration....
Then, sliding down the finger by the upper part of the screen you can see a notification that the GPS is working and an GPS icon near the bluetooth symbol is visible. Edit: No, is the android system who shows that alerts when the navigator(whichever you use) request "location" ...
Yes, I have "Mock locations" activated with "KFHD xSettings" (courtesy of 0xD34D), but it works for me with or without "internal location-provider" set.
-
I'm testing now the "Alpine quest hiking" app, but by the day I will do with Tom-tom.
The experience has been a bitter relief, as this "Bluetooth GPS Provider"(Turboirc) app seems to be the only remaining solution to tie GPSs and Kindles, but the program hasn't options and loses signal occasionally, just only a second fortunately. Accuracy is good.
-
The "original" "Bluetooth GPS Provider"(Mobilej) behaviour has changed, in doesn't hangs now, only announces that has been closed and, curiously only if you install it normally(not system/app), lets you a feedback with the creator to send him errors. I will prove if he or they can fix it in between.
later I will show more tests....
Route 66 hangs with or without WIFI (I set it off to secure there is no "wifi location") in the precise moment I run "Bluetooth GPS Provider"(turbo irc). With the earlier updates it worked good with "Bluetooth GPS Provider"(movilej.de).
-
It seems that the turboirc version does something wrong when injecting coordinates to the android system.
GPS update 7.3.0 very good .But hope to soon have CM10.1 . Many thanks Hashcode :victory:
gflorezarroyo said:
Route 66 hangs with or without WIFI (I set it off to secure there is no "wifi location") in the precise moment I run "Bluetooth GPS Provider"(turbo irc). With the earlier updates it worked good with "Bluetooth GPS Provider"(movilej.de).
-
It seems that the turboirc version does something wrong when injecting coordinates to the android system.
Click to expand...
Click to collapse
^Exactly...I believe I am having the same issue with the turboirc version not feeding gps information. I got it to connect with position initially but does not continually update data in intervals like the mobilej.de version had. As a result, the gps apps get hung up or stop without this feed of coordinate data.
i suppose I will just use my phone in the mean time, until maybe a new firmware update will change this issue!
I've sideloaded Avare, a free superb navigator, for planes!. It doesn't reads the "GPS Provider" app, but neither hangs. Tomtom seems to work, but its raining here and the test must wait to my way home, later.
By car, friends....
hokie152 said: "Exactly...I believe I am having the same issue with the turboirc version not feeding gps information"
Not so easy, it seems some apps see the information and others no. "Alpine quest" works, so the provider app is feeding.
hokie152. If you need GPS to fly, do it as you said by tethering from your phone.............. or downgrade to 7.2.3 and lock updates.....
quan_1986 said:
GPS update 7.3.0 very good .But hope to soon have CM10.1 . Many thanks Hashcode :victory:
Click to expand...
Click to collapse
But be aware of Bluetooth not working properly, yet (Bug)
Definitively Tomtom works with "Bluetooth GPS Provider"(turboirc) on 7.3.0. Has the same glitches every now and then like Alpine Quest, but it brings you to home and alerts you of radars.....
Another bluetooth gps provider named..... BlueGPS4android, installs but I cant make it work:
http://sourceforge.net/projects/bluegps4droid/?source=dlp
Bluegps4android works in my phone, but all versions offered refuse to tie in Kindle.
-------------------------------------------------------------------------------
I've find an app that connects DIRECTLY with the GPS dongle without a provider app. Its name is Trekbuddy, side-loaded from Google Market.
Is a complex program that needs some study, but apparently it works, I don't know if can be used to fly....
To hokie152:
I've installed Air Navigation Pro, and it seems to react and receive some coordinates if you have set "wifi location" with or without wifi. Later I'll take the car and test it. My bluetooth dongle is a cheap and outdated Zaapa Touch(only 5 euros!).
Air Navigation Pro works, but suffers occasionally the same loss of data failures, causing the little plane in the screen turn as a weathervane moved by a whirlwind....But it runs.
gflorezarroyo said:
Air Navigation Pro works, but suffers occasionally the same loss of data failures, causing the little plane in the screen turn as a weathervane moved by a whirlwind....But it runs.
Click to expand...
Click to collapse
I will try connecting Air Navigation Pro using Bluetooth GPS Provider by turboir and see if I have the same results "with or without WIFI". I have seen the little plane before rotate in circles when you stop moving (at zero velocity). It displays your location but has no direction of motion so it cannot hold a proper heading. Thanks!
I mean that I think this program inject coordinates(mock locations) to the system, so its necessary that location services are working, ie the approximate location by wifi used by our Kindle. Happy Fly!
-
Now I'm making a map of my way to home to test Trekbuddy reading directly from my dongle gps..... to test if it isn't guilty of the glitches.
Hi all,
I use yandex navigator regularly but have sometimes gps lock problems. I also tried it with other Navigation Software I noticed that disabling Google location access under accounts and restarting after that solves the problem. I can't use Google in Turkey for navigation. Sometimes after installing a new app with location access it occurs again but not every time.
Does anyone have an idea or solution?
Thanks. ..
Hi,
my bluetooth suddenly is turning on for some reason i don't know today. I don't know how it is turning on. any way to track which apps is doing this?
I tried to check on settings >> applications >> application manager >> change system settings but there are too many apps that is enabled and I don't know which app is really causing the bluetooth to turn on.
any other method to know how?
Thanks!
Hi, I have the same problem. Did you find out how to repair this?
Are you using Good Lock?
Good Lock, uses a location base to change toggles.
I have mine setup so when i leave the house Bluetooth comes on.
When i get to work, Bluetooth goes off and silent mode is activated.
When i leave work, Sound is loud and bluetooth is active again.
When i get home, it will turn off Bluetooth and enable Wifi.
(Just incase you are using Good Lock) It was puzzling me for ages until i went in and configured it properly.
jjocer said:
Hi, I have the same problem. Did you find out how to repair this?
Click to expand...
Click to collapse
for my case, i found out it was because of the Mi Fit app. When I restart the phone, the bluetooth is not turning on. but when I open the Mi Fit app, it will not always auto turn on the bluetooth.
Check if you have this app.
My bluetooth is turning on only when my screen is off. When I turn the screen on I see bluetooth icon, and after unlock, icon disappear. Sometime, when I doesn't wait on lock screen, but unlock phone immediately bluetooth remain on. I attach list of all my apps.
Is there any app that shows apps which are using bluetooth?
I'm on stock ROM with root, xposed and twrp.
Well a good way would to individually check all the apps, who knows maybe you'll get lucky and it will be the first one you try. Or i recommend just going through the ones that use Bluetooth commonly eg if you have like a smart watch that connects to your phone.
I make a full wipe yeasterday, and problem remains. BetterBatteryStats shows that bluetooth is linked with turning screen on (see screenshot).
I have XPrivacy, how can I set to always asks to use bluetooth?
I uninstalled half of all my apps, and nothing changed.
Did you tried to wipe apps data? Go to app manager, choose view of system apps, and find anything involved with BT, as I remember I had 3 or 4 in my Galaxy S5.
As I said before I made full wipe. Can I get any information from btsnoop_hci.log?
Did you found problem just after wipe (on a clean ROM)? Or after restore apps?
At first startup, phone restore my apps. so I can't it is system app or installed from google play.
Ok so IMHO it's not bad idea to delete app data of some BT applications from app manager.
How can I find which app is using bluetooth?
Names starts with "bluetooth" and contains "bluetooth" ex. sharing bluetooth (udostępnianie).
Ok, done. I have 4 apps: Bluetooth MIDI Service 6.0.1, BluetoothTest 6.0.1, Bluetooth Sharing 6.0.1 and com.see.knox.bluetooth (which was uninstalled, because it's grey in titanium backup).
Ok, keep the fingers crossed! This helped me with my old S5 - maybe will be helpfull to you.
Unfortunately no effect for me.
Clear also data of google play services.
Wife and I recently applied the Nougat update that was pushed out. However, now both our phones have GPS issues. We use apps that require a GPS connection. Up until now, those apps worked from our home and our workplace. However, since the update, the apps keep giving us GPS errors.
I notice that Google Maps also can's show me where I'm actually at. Sometimes it works, but only for a few minutes. I downloaded GPS Status and Toolbox and it can't get a lock from my desk.
Is there any fixes out there that address the GPS signal strength, post Android 7.0?
Thank you!
Having no GPS problems on my Sprint S7
Under the Location settings I have "Locating Method" set to "High accuracy" and both "Wi-Fi scanning" and "Bluetooth scanning" disabled under "Improve accuracy"
Have you tried factory reset?
That seems to fix some of the various issues that people are having through the Nougat update.
I'll try turning those off and see how it goes.
No, didn't want to do a factory reset, if I didn't have to... Such a pain in the arse.
Thank you!
Any luck with this? The factory reset didn't work for me on my Sprint S7, I still have GPS issues and now I've lost app data to Runtastic and ToMarket GPS settings are the same as DankNuts.
Since the nougat update, It happens every time I use Runtastic (every other day). When it happens, I notice that Maps is also showing the wrong location (anywhere from where I'm at to a mile away). I've tried the app GPS Test (clearing and updating AGPS) and numerous phone restarts. At first those seemed to work. Now I try clearing the cache of apps that use GPS and that has worked long enough for my 90 minute run.
One thing that I just realized now, is that when I start Waze or navigation I don't seem to have the problem. I may need to test with a combination of those and Runtastic.
satellite problem
I installed gps statua software and it says 0/0 satellites. Gps essentials software says location provider cell.
For me it seems that the gps module would not somehow "turn on"
Edit: if i change in samsumg setting 'location method' to 'device only' gps essentials says location provider "unknown"
Sagula said:
I installed gps statua software and it says 0/0 satellites. Gps essentials software says location provider cell.
For me it seems that the gps module would not somehow "turn on"
Edit: if i change in samsumg setting 'location method' to 'device only' gps essentials says location provider "unknown"
Click to expand...
Click to collapse
did you solve it? I think tomorrow I'll go to samsung assistance..
better gps solution
Goto settings; location; then top-right scanning, switch off wifi scanning and also bluetooth
Because there is a conflict with wifi and gps.
Help with several devices.
peter
Mine was defective, they replaced the motherboard entirely