Hi every one I wanted to install cloudy 2_3.3 in my lg g2 d802 model i was following this tutorial :
http://forum.xda-developers.com/lg-...ide-how-to-install-cloudyg2-3-1-d802-t3137055
But when I rebooted my phone it got stuck on fastboot mode . In order to fix it i was using adb minimal . So i erased the aboot,boot,recovery,laf files . then i removed my phone from usb and connected again to check if the problem is fixed or not but now the phone isn't recognized by computer . It doesn't appear etc. so Kindly tell me what can i do in order to fix it . any help would be great .
thanks in advance
move thread
Hi Xda,
i m new here, sorry for my bad English.!
I have a note 4 n910f model and i installed "[5.0.1][N910F] DN ROM from E-Team v0.6" this rom on my Cell phone, it was all working fine and until yesterday my battery was like 13% and it suddenly turned off.
I plugged it to the charger and it was stuck at Samsung Logo, i thought its a boot loop so i Cleared Cache etc..
it didn't work, so i installed this rom again clearing all the Data and it was fine but today while i using Gmail and it suddenly turned off and then samsumg Logo came on the screen and then...:'(, nothing !!.
I plugged it to my laptop via usb cable and it was detected as "qhsusb_dload" so i installed Drivers and now it shows "qualcomm hs-usb qdloader 9008 ".
I think its Hard Bricked :crying:
Anyone with Same Device could help creating a Unbrick Disk image...
Turn download Mode on and Flash Stock Rom.
robotnikz said:
Turn download Mode on and Flash Stock Rom.
Click to expand...
Click to collapse
It doesn't, no Download no Recovery...
i think its Bricked
HusniBaig said:
It doesn't, no Download no Recovery...
i think its Bricked
Click to expand...
Click to collapse
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
HusniBaig said:
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
Click to expand...
Click to collapse
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Download Kies and use the Emergency recover.
NickVXD said:
Download Kies and use the Emergency recover.
Click to expand...
Click to collapse
Bro I tried it is not being detected by Kies..:'(
Rajada said:
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Click to expand...
Click to collapse
No Bro using a Debrick Image It will Boot from SD Card instead of its EMmc Memory...?
Got it..?
Anyone with N910F can get me system files dump,
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
HusniBaig said:
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Click to expand...
Click to collapse
HI, I am having the same problem with my note 4 N910F, Will this Debrick image generator work with Note 4?
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Shared a Guide here
http://forum.xda-developers.com/note-4/help/samsung-official-debrick-guide-note-4-t3363248
[email protected]% said:
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Click to expand...
Click to collapse
Hi, I've got the same problem, could you please send me the files so I could try on my sd card. Thanks
This Method Works Only If U Have A fine Working (Not Damaged EMMC)....
please i need the unbrick image for the note 4 sm-n910a for at&t. please if you have the note 4 ,do the file and send me to [email protected] .
the link of my bootloader : http://www.mediafire.com/file/vc49m...196496_REV00_user_low_ship_MULTI_CERT.tar.md5
the link of the method: http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar
the pit link: http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar
password for this is daseul123
please help! scuse my english
thank
Need help please (sm-n910f)
don't have recovery and download mode no power on it shows a qualcomm hs-usb qdloader 9008 on device manager
can any one know to to debrick it please
thank in advance
Hi Guys im sory my english is bad but i think we can understand.
Few days ago i bought mainboard for my LG Fino D290N and i installed a original firmware KDZ with LG Flash tool and everything is being fine until my phone show up Android upgrade is downloading in status bar below Wifi,Blt ..etc you know what i mean and i let it to download after download is finished i pres to instal and my phone reboot and my computer pop out that instalind driver for QDload 9008 driver i realy pissed up , why that hapend can anyone explain me i will never do system upgrade .
So now on i have 2 motherboard with HardBrick problem (my first board is Hardbricked Qdload 9008 Also) , I searched all over the web and try Everythings but without lucky and All over XDA forums for LG Fino and other posts found somthing but nothing i try
BoardDiag,Qfill,Lg software, LG extrator tool , everything without sucsess so i wonder i have Galaxy Mega 6.3 and its also was Qdload 9008 and found on XDA forum debrick image wich i write with win32disk imager and it realy works but i can't find debrick image for LG L Fino D290n i saw how it make but i dont have the same phone D290n to make debrick.image .
And also i now that only solution is ufi,octoput and other Box whick are great expensive .
If someone have debrick image please post here so we can give a shot to try , and if you have some sugestion please tel me .
Thanks .
Here is my debrick.bin for the d290n
https://forum.xda-developers.com/d290n/how-to/guide-how-to-unbrick-lg-l-fino-qualcomm-t3495192
hi every one, i have SM G530w with FRP problem, then i managed to bypass it with method found in youtube.. but when i install update thru OTA in 100% phone restart then suddenly phone not powering on. itried to connet it with pc it was detected in Qualcomm HS-USB QDLoader 9008 .
i heard and found here solution only for other variants, i cant apply it yo my phone since my phone cant enter download mode.
please guide me to revive my phone, can someone create debricked image file for my phone SM G530w and share here, any help is much appreciated thank you.
azzir04 said:
hi every one, i have SM G530w with FRP problem, then i managed to bypass it with method found in youtube.. but when i install update thru OTA in 100% phone restart then suddenly phone not powering on. itried to connet it with pc it was detected in Qualcomm HS-USB QDLoader 9008 .
i heard and found here solution only for other variants, i cant apply it yo my phone since my phone cant enter download mode.
please guide me to revive my phone, can someone create debricked image file for my phone SM G530w and share here, any help is much appreciated thank you.
Click to expand...
Click to collapse
Post the problem in Q/A , help and troubleshooting
And ask moderatora to delete your post
Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
DarthVader said:
Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
Click to expand...
Click to collapse
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
hk1271 said:
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
Click to expand...
Click to collapse
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
DarthVader said:
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
Click to expand...
Click to collapse
I used another qfil firmware
https://drive.google.com/file/d/1PixuumVVzxBKUsQ88X3AJ21Hsi2mV3Zq/view
Here is the link .. you can find the firehose and all files in the firmare folder . Best of Luck
I have a similar situation where I am unable to power on the phone in any way, and I am only able to communicate with the qualcom USB 9008 driver.
I am following your instructions using the firmware files you provided (thank you!) and I can see an attempt is being made to download the files before sahara error occurs.
I don't think I enabled developer options when my Nexus 6P was working and wondered if sahara error is due to that.
I was wondering if you had previously enabled developer options by tapping on the build number several times, once the operating system booted and if that is a critical step in being able to recover the Nexus 6p from this hard bricked state where I am stuck in EDL 9008 mode, and unable to access bootloader, and volume+power keys do not do anything...I feel like I'm screwed (and already moved on) but using time these days to learn about android devices!
thanks!