I rooted my Nook in 2014. I hadn't used it since 17 or 18 and now nothing communicates. I can't get the kindle app to sync or anything. Is it done?
NookRoot93 said:
I rooted my Nook in 2014. I hadn't used it since 17 or 18 and now nothing communicates. I can't get the kindle app to sync or anything. Is it done?
Click to expand...
Click to collapse
Two separate issues:
1. For the Kindle app, see this post: https://forum.xda-developers.com/nook-touch/general/elses-nook-simple-touch-kindle-app-stop-t3205615
Post #24 in that thread gives a step-by-step process for copying the updated cacerts.bks file (found at the end of post #10) to your NST.
2. You don't say what browser you are trying to use. Updating the cacerts.bks file may help, but you need a browser that can handle TLS 1.2 security protocols. Opera Mobile 12.1 is an example.
Since I missed the 2018 update, it can't communicate with Nook servers. I just reset the device and I now it's just done. I noticed several other people had this happen recently online with non-rooted Nooks. I have another rooted Nook I can try. I didn't try any browsers, just the kindle and app stores. I did notice my gmail did work.
NookRoot93 said:
Since I missed the 2018 update, it can't communicate with Nook servers. I just reset the device and I now it's just done. I noticed several other people had this happen recently online with non-rooted Nooks. I have another rooted Nook I can try. I didn't try any browsers, just the kindle and app stores. I did notice my gmail did work.
Click to expand...
Click to collapse
When I meant done, I meant I can register it now because while connected to WiFi it says it's not, and tho' I'm layman, I'd take it as not communicating with servers due to software version.
NookRoot93 said:
When I meant done, I meant I can register it now because while connected to WiFi it says it's not, and tho' I'm layman, I'd take it as not communicating with servers due to software version.
Click to expand...
Click to collapse
You are correct, only 1.2.2 firmware will permit you to register now. If that's what you want to do, download the update zip from the B&N website. With your NST at the "welcome" screen, connect the device via USB to your PC and move the zip onto it. Disconnect from USB and let the NST sleep on its own. It will update. Then you can proceed with registration, rooting, etc.
nmyshkin said:
You are correct, only 1.2.2 firmware will permit you to register now. If that's what you want to do, download the update zip from the B&N website. With your NST at the "welcome" screen, connect the device via USB to your PC and move th.e zip onto it. Disconnect from USB and let the NST sleep on its own. It will update. Then you can proceed with registration, rooting, etc.
Click to expand...
Click to collapse
Hi. I can't seem to find the update zip file as downloadable from B&N site. If you could help provide a link, thanks in advance. The only update I found was for Nook HD or is that one ok?
NookRoot93 said:
Hi. I can't seem to find the update zip file as downloadable from B&N site. If you could help provide a link, thanks in advance. The only update I found was for Nook HD or is that one ok?
Click to expand...
Click to collapse
Go here: https://help.barnesandnoble.com/app/answers/detail/a_id/4212 and scroll down to Nook Simple Touch. Follow the "download" link.
nmyshkin said:
You are correct, only 1.2.2 firmware will permit you to register now. If that's what you want to do, download the update zip from the B&N website. With your NST at the "welcome" screen, connect the device via USB to your PC and move the zip onto it. Disconnect from USB and let the NST sleep on its own. It will update. Then you can proceed with registration, rooting, etc.
Click to expand...
Click to collapse
nmyshkin said:
Go here: https://help.barnesandnoble.com/app/answers/detail/a_id/4212 and scroll down to Nook Simple Touch. Follow the "download" link.
Click to expand...
Click to collapse
Hi. I found the update. Thank you! New problem. I can't get my new laptop to recognize the Nook via USB. It only charges. Do you have a good, instructional link on how to get a driver to recognize the device?
NookRoot93 said:
Hi. I found the update. Thank you! New problem. I can't get my new laptop to recognize the Nook via USB. It only charges. Do you have a good, instructional link on how to get a driver to recognize the device?
Click to expand...
Click to collapse
It's always something.
According to B&N (https://help.barnesandnoble.com/app.../~/nook-simple-touch---transfer-files-from-pc) you don't need any special drivers for a PC to recognize the NST, but I do recall back in the Win XP days that we had to massage a .inf file to get the PC to see the NST. I've searched for that info (which is what you should do) on the forum and generally via Google bu failed to find it. The information is there somewhere.
If you've got a Mac or are running Linux, then I truly have no idea.
WIN 10. I've tried adding drivers, legacy hardware....maybe I can try on a Win 7 tonight.
I got the update installed. Thanks again!
NookRoot93 said:
WIN 10. I've tried adding drivers, legacy hardware....maybe I can try on a Win 7 tonight.
Click to expand...
Click to collapse
Hello again. I've got the Nook updated and rooted via NookManager. My previous way was the rooted forever root(?). So...can I read kindle titles on the device? That's really the main reason I rooted it in the first place. Are there apps that still work for it? It looks like not much does. Is there a link for legacy apk to download? Thank you so much for the help you've provided me!
NookRoot93 said:
Hello again. I've got the Nook updated and rooted via NookManager. My previous way was the rooted forever root(?). So...can I read kindle titles on the device? That's really the main reason I rooted it in the first place. Are there apps that still work for it? It looks like not much does. Is there a link for legacy apk to download? Thank you so much for the help you've provided me!
Click to expand...
Click to collapse
Yes, you can install the Kindle app and read mobi format ebooks, either side-loaded or from your local library Overdrive system, but you'll have to update the cacerts.bks file first because the security certificates in the stock file have died. There is an option described in the second post in the updated NookManager thread, but it's probably easier if you didn't do it during rooting to do it manually.
Here's what I wrote:
"Some certificates have expired (like the one for Amazon.com). Some editing and updating of our file was done by XDA member @tshoulihane here: https://forum.xda-developers.com/showpost.php?p=65344931&postcount=10 (use the more complete file).
Recently I came across a CM 7 ROM (Honeycomb) and harvested the cacerts file from there. You can find it here: https://forum.xda-developers.com/nook-touch/general/nst-g-revisiting-cacerts-bks-t3872617. This also works with Amazon.com and contains many other certificates than our original file--but some are expired."
So grab one of the files and then follow the directions in post #24 of this thread: https://forum.xda-developers.com/nook-touch/general/nst-g-revisiting-cacerts-bks-t3872617
As for other apps, there are many that still work quite well. Follow the link in my signature for a zip to download of all the apps I currently use. If you don't see something there that you think you want, just ask. Someone may have a working copy.
Sorry for the late reply. I didn't see your last post.
NookRoot93 said:
I got the update installed. Thanks again!
Click to expand...
Click to collapse
Can you tell me how you did it? I don't seem to find a way to get the file to my nook.
velayo said:
Can you tell me how you did it? I don't seem to find a way to get the file to my nook.
Click to expand...
Click to collapse
Are you talking about the B&N 1.2.2 update? If so, download the zip from the B&N website. Then connect your device to your PC via USB and copy the zip file to the root of the NOOK drive (not the sdcard). Then wait. The device needs to sleep before it notices the update and installs it.
You need to revert to stock to do this and you can do it on the "Welcome" screen without going any further.
nmyshkin said:
Are you talking about the B&N 1.2.2 update? If so, download the zip from the B&N website. Then connect your device to your PC via USB and copy the zip file to the root of the NOOK drive (not the sdcard). Then wait. The device needs to sleep before it notices the update and installs it.
You need to revert to stock to do this and you can do it on the "Welcome" screen without going any further.
Click to expand...
Click to collapse
Thank you!! My NSTG wasn't mounting on Windows. Had to reset and then it mounted. @nmyshkin Thanks for keeping our devices alive. I appreciate everything you do!!
Related
I have a Touch rooted with Touchnooter. My touch doesn't seem to want to update to 1.1 (I know doing so will kill GAPPS, but I'm okay with that). I've waited for the update to be pushed and I've also put the update file in my Nook directory. Is there something about Touchnooter that prevents the Touch from updating?
I haven't tried to update after using touchnooter, dont really know if it blocks nothing, OTA or prevents from updates, OTA or manullay, but you should restore a copy of your nook if you have it, or use nookrestore and then force a reset to also delete /data.
Or use adb to force restore
adb shell
echo -n -e "\x08\x00\x00\x00" > /rom/devconf/BootCnt
reboot
Click to expand...
Click to collapse
and then reset normally and if it dosnt let you, force reset, force it shutting down your nook, then starting it up, and when the screen flickers press right and left bottom buttons, hold for 5+ seconds.
That will erase /system (restore) and /data (reset), and you should be able to update.
I do have a backup copy, but I was hoping I wouldn't have to do a restore to get the update. I mean, I'd really like to avoid that.
Have others been able to update their Touchnooter Touches to 1.1 without reverting?
kunchers said:
I do have a backup copy, but I was hoping I wouldn't have to do a restore to get the update. I mean, I'd really like to avoid that.
Have others been able to update their Touchnooter Touches to 1.1 without reverting?
Click to expand...
Click to collapse
Updating a TouchNootered NST have caused troubles in the past and is likely to do so with this update as well.
Even if it worked for other users it might not work for you as people do different things to their rooted NST.
I know it's a hassle, but you should really restore+reset your NST before updating if you want to avoid problems.
The OP's post has given me some hope as I do not wish to unroot/re-root-/update at this time, but have kept my NST's wireless off as I'm afraid of getting the update.
Am I to understand that a TouchNooter'd unit (1.6.24 on an NST1.0.1) will not get updated and there is nothing to fear?
TJay99 said:
Am I to understand that a TouchNooter'd unit (1.6.24 on an NST1.0.1) will not get updated and there is nothing to fear?
Click to expand...
Click to collapse
There's nothing in TN 1.6.24 that will block updates.
If you want to make sure, here's the cleanest way of doing so:
Block BN OTA Updates the EASY way
Yes, it's a Nook Color thread but it would work for Nook ST aswell.
TJay99 said:
The OP's post has given me some hope as I do not wish to unroot/re-root-/update at this time, but have kept my NST's wireless off as I'm afraid of getting the update.
Am I to understand that a TouchNooter'd unit (1.6.24 on an NST1.0.1) will not get updated and there is nothing to fear?
Click to expand...
Click to collapse
Blocking updates is also covered here http://forum.xda-developers.com/showthread.php?t=1346748 but with adb and sqlite.
Search for Blocking OTA updates: on the thread.
Yeah, I hear you. I gotta just do it. Strange though, why my Nook won't update.
ros87 said:
Updating a TouchNootered NST have caused troubles in the past and is likely to do so with this update as well.
Even if it worked for other users it might not work for you as people do different things to their rooted NST.
I know it's a hassle, but you should really restore+reset your NST before updating if you want to avoid problems.
Click to expand...
Click to collapse
Thanks ros87 and eded333 for the information.
As regards the adb/sqlite method, I just reviewed that thread and the specific "Blocking OTA Updates" section. Looks easy,... assuming one thing: that -- other than installing java JKD and the android SDK on my PC -- my NST (TouchNooter'd 1.6.2.4 on B&N1.0.1) already is set up to receive those commands listed. If it is, then I can simply connect the NST and type only those commands listed in the "Blocking OTA Updates" section. Right?
If that's not the case, what other procedures must I do in order to get it done? For instance, there are sections entitled "Setting up adb on the nook touch" and "Setting up root access on NST through adb and installing busybox". Would I need to do any part of those processes?
Much obliged if you can clear up that one matter for me!
I couldn't get my rooted 1.0.1 nook to update even manually. It silently deleted the update file and did nothing every time I tried.
Kralik said:
I couldn't get my rooted 1.0.1 nook to update even manually. It silently deleted the update file and did nothing every time I tried.
Click to expand...
Click to collapse
Hi, Kralik.
I wonder if it would keep downloading/deleting the update file in a perpetual cycle, though. Isn't that what would happen?
TJay99 said:
Thanks ros87 and eded333 for the information.
As regards the adb/sqlite method, I just reviewed that thread and the specific "Blocking OTA Updates" section. Looks easy,... assuming one thing: that -- other than installing java JKD and the android SDK on my PC -- my NST (TouchNooter'd 1.6.2.4 on B&N1.0.1) already is set up to receive those commands listed. If it is, then I can simply connect the NST and type only those commands listed in the "Blocking OTA Updates" section. Right?
If that's not the case, what other procedures must I do in order to get it done? For instance, there are sections entitled "Setting up adb on the nook touch" and "Setting up root access on NST through adb and installing busybox". Would I need to do any part of those processes?
Much obliged if you can clear up that one matter for me!
Click to expand...
Click to collapse
Touchnooter has adb enabled over wifi (If i'm not wrong), so you wouldnt have to enable it again, go directly into the OTA.
TJay99 said:
As regards the adb/sqlite method, I just reviewed that thread and the specific "Blocking OTA Updates" section. Looks easy,... assuming one thing: that -- other than installing java JKD and the android SDK on my PC -- my NST (TouchNooter'd 1.6.2.4 on B&N1.0.1) already is set up to receive those commands listed. If it is, then I can simply connect the NST and type only those commands listed in the "Blocking OTA Updates" section. Right?
Click to expand...
Click to collapse
You should be good to go if you install jdk + android sdk.
With TouchNooter 1.6.24 you should allready have adb access enabled via wifi.
---------- Post added at 08:34 PM ---------- Previous post was at 08:33 PM ----------
Kralik said:
I couldn't get my rooted 1.0.1 nook to update even manually. It silently deleted the update file and did nothing every time I tried.
Click to expand...
Click to collapse
Interesting, I need to take a closer look at the update process some day
Yep, same behavior with mine.
Kralik said:
I couldn't get my rooted 1.0.1 nook to update even manually. It silently deleted the update file and did nothing every time I tried.
Click to expand...
Click to collapse
TJay99 said:
Hi, Kralik.
I wonder if it would keep downloading/deleting the update file in a perpetual cycle, though. Isn't that what would happen?
Click to expand...
Click to collapse
That is my guess. Without knowing for sure you're left with two unpleasant options:
1) Your nook tries to update continuously: downloading, deleting, and wasting battery life,* or
2) Your nook actually updates and destroys everything!
So you might take the time to "block" OTA updates as other have mentioned. But then there's option...
3) You go through the rigors and just get the 1.1.0 firmware upgrade over and done with, rerooting afterwards.
*I wonder if this is related to the "I rooted my nook and now my battery life is toast" thread?
This is an excellent point. I've also experienced pretty sad battery life since applying Touchnooter.
I'll just bite the bullet and restore/re-root.
Kralik said:
1) Your nook tries to update continuously: downloading, deleting, and wasting battery life,* or
*I wonder if this is related to the "I rooted my nook and now my battery life is toast" thread?
Click to expand...
Click to collapse
kunchers said:
This is an excellent point. I've also experienced pretty sad battery life since applying Touchnooter.
I'll just bite the bullet and restore/re-root.
Click to expand...
Click to collapse
This is the best time to do that, finally got Gapps to work on 1.1 manully, at last!
If you wish to try it, here is my post:
http://forum.xda-developers.com/showthread.php?t=1346748
Kralik said:
That is my guess
1) Your nook tries to update continuously: downloading, deleting, and wasting battery life,* or
Click to expand...
Click to collapse
A good and interesting guess.
There are intervals defined for the update checks, but maybe if it finds an update but are unable to apply it, it end up in a loop..
GApps aren't actually that hard to enable if you use TouchNooter 1.6.24 and manually replace /nooter/boot/uRamdisk and /system/framework/framework.jar with the updated versions. Other than that step, very little difference in the rooting processes. If one is going to restore to factory and build up from there, what is the advantage to wading through all the manual steps?
Kralik said:
GApps aren't actually that hard to enable if you use TouchNooter 1.6.24 and manually replace /nooter/boot/uRamdisk and /system/framework/framework.jar with the updated versions. Other than that step, very little difference in the rooting processes. If one is going to restore to factory and build up from there, what is the advantage to wading through all the manual steps?
Click to expand...
Click to collapse
At this moment, fun, learning, and stability (for the moment it allways works, but I need more feedback from people that tried it) eventually, when I delete all the blob that Gapps dosn't need for them to work, and is installed on the default package of Touchnooter (Don't get me wrong I really think its a great method) you will get a cleaner install.
Anyway, If you don't want to go through all the steps you can use the new 1.1 Touchnooter to get root, and then use my GApps method.
Hi everyone. I'm a long time computer builder/hacker and am just getting into the Nook Simple Touch and rooting. I see that 1.1.2 just came out.
-Should I update to that firmware and them root?
-Will current rooting techniques work with the new firmware?
-Is it possible and easy to unroot?
Thanks in advance for your help. I have done some searching but am having trouble finding the answers and dont want to waste even more time. I hope you understand and I can't wait to get into this rooting thing!
Guyman2 said:
[...] -Should I update to that firmware and them root?
Click to expand...
Click to collapse
The update incorporates wifi fixes that can be useful if you use it on the road, or suffer a router that v1.1.0 had problems with. I'd recommend it, yes. I haven't seen any downside.
-Will current rooting techniques work with the new firmware?
Click to expand...
Click to collapse
Yes. I did a complete wipe on mine running v1.1.0, updated to v1.1.2 and used the normal TouchNooter 2.1.31 process. Everything worked exactly as it did on v1.1.0, including having to wait 24 hours for the Market to activate.
-Is it possible and easy to unroot?
Click to expand...
Click to collapse
Hmm. I had no problem wiping and reloading mine. Not sure if that constitutes a 100% unroot, but I think it does. I had no problems.
Thanks in advance for your help. I have done some searching but am having trouble finding the answers and dont want to waste even more time. I hope you understand and I can't wait to get into this rooting thing!
Click to expand...
Click to collapse
I just made a point of following Gabrial's instructions in the first post, and everything went smoothly. If you have reasonable expectations, the NST rooted is a great little device. I think you'll be pleased.
[EDIT: Since writing this, I began having problems searching in the Android Market. I rolled back to B&N v1.1.0 and re-rooted, and STILL am having that problem. I don't know why this only started recently, and I do not think it's related to v1.1.2, but I wanted to post it here as fair warning. Also, after rooting using TN, the device info screen showed 1.1.0 after having updated to 1.1.2. I'm changing my recommendation to "do it if you're having wifi issues" for now.]
Thank you for such a wonderful and detailed post. My micro SD card should be here tomorrow and I cant wait to root it. I have a gmail account but not a youtube. Is it imperative to link gmail and youtube to root this? I would post in that thread, but as a new user i have to wait for 10 posts to do that. Thanks!
Wonderful. Since I had a mishap when screwing with framework-res.apk, I am going to do a full wipe. This is cool!
Guyman2 said:
Thank you for such a wonderful and detailed post. My micro SD card should be here tomorrow and I cant wait to root it. I have a gmail account but not a youtube. Is it imperative to link gmail and youtube to root this? I would post in that thread, but as a new user i have to wait for 10 posts to do that. Thanks!
Click to expand...
Click to collapse
YouTube and Gmail are linked -- or at least can be. Go to YT in your desktop browser, and you should be able to sign in using your Gmail credentials. (Google is assimilating EVERYTHING!)
You do need to link to Google for Market functionality, so yes, you probably do need to do it in practical terms.
---------- Post added at 11:33 AM ---------- Previous post was at 11:32 AM ----------
brendan10211 said:
Wonderful. Since I had a mishap when screwing with framework-res.apk, I am going to do a full wipe. This is cool!
Click to expand...
Click to collapse
The "8 failed boot" process should let you reload the default firmware your unit shipped with if you need to get out of a bootloop situation.
Just a reminder that a FULL IMAGE BACKUP is strongly recommended before you start monkeying with too much, ideally on Day One. Unlike other NOOK devices, you can badly, if not permanently, screw up a NST if you wipe out some system information. Be sure to read through the various threads before going too far!
So I should restore my nook to factory? Will that do anything to the partitions?
brendan10211 said:
So I should restore my nook to factory? Will that do anything to the partitions?
Click to expand...
Click to collapse
If you're stuck, it's an option. My understanding is that:
The "8 failed boots" procedure will restore the firmware your NST shipped with.
The "Unregister and Wipe" procedure from settings will wipe all user data off the internal system.
I was not able to manually update from v1.1.0 to v1.1.2 if previously rooted. Not sure if that's normal, but I had a lot of cruft on my unit, so just did both procedures. Files on my uSD were untouched.
I'm following your guide and see that making a backup is recommended. I would post in that forum, but as a new user here, i am not allowed to there. they say to follow these instructions:
BACKUP/RESTORE N2E Win7
Grab a copy of Roadkil's free DiskImager for backup and restore.
and a copy of free MiniTool Partition Wizard at:
Boot nook with noogie.img : nookdevs.com/NookTouch_Rootin (the "Rooted Forever" screen) and connect to your computer via USB.
Use DiskImager to copy your Nook partition to a file, being sure to select "Physical Disk" in the drop down list.
http://forum.xda-developers.com/showthread.php?t=1142983
However when i follow this step I get to a link that doesn't work. Thus I cannot backup my nook:
Boot nook with noogie.img
Any ideas? Thanks. Again, I'd post the link that wont work but the damn forum wont let me post outside links until i do 8 more posts. This is frustrating as HELL. But you should be able to find out what my problem is from the details i am so kindly allowed to post.
Or maybe I shouldnt bother backing up, since as another user pointed out, after a few failed boots it automatically will store its original firmware. What do you guys think?
You need to be sure that you use a program to write noogie.img to an SD card (I'll post a link to one when I have time), and be sure that you do not write the image to the SD card when it is in the Nook! You need to use an external card reader. After that, you just turn your Nook off, put the SD card into your Nook, and turn the Nook on.
Thanks guys for taking time to make these posts. This should help me in figuring all this stuff out.
so do i need to root the nook BEFORE backing it up? isnt that what noogie.img does?
A quick update: There do seem to be some annoyances if using existing TouchNooter versions to root B&N 1.1.2. If you haven't already done so, and aren't suffering from the wireless issue, you might hold off a bit until the exact implications are better known.
If you've already done it, it shouldn't be the end of the world either.
---------- Post added at 10:03 AM ---------- Previous post was at 10:02 AM ----------
Guyman2 said:
so do i need to root the nook BEFORE backing it up? isnt that what noogie.img does?
Click to expand...
Click to collapse
No. Noogie just exposes the normally inaccessible NOOK partitions so you can back them up. Noogies doesn't root anything. It's recommended to make a backup of your pristine device BEFORE rooting, in case anything goes wrong.
Thanks! How do i get noogie.img? the link on the backup page doesn't work and I dont want to get the wrong version. Any idea how long it takes for the next rooting version to come out?
Guyman2 said:
Thanks! How do i get noogie.img? the link on the backup page doesn't work and I dont want to get the wrong version. Any idea how long it takes for the next rooting version to come out?
Click to expand...
Click to collapse
It does look like the download link to noogie.img.gz is broken, even on the redirected Nook Devs page.
Yeah, that article is removed. Does anyone have a noogie.img they can slap in dropbox public?
Man, they dont make this easy. The direction suck, links aren't working, sheesh. Unlocking the original iPhone was easier! I sure hope this gets updated somewhat soon.
I have noogie.img somewhere on my PC, I'll get it uploaded in about an hour.
Thanks, i hope you can find that file. Since the directions are so vague, do i need a special program to put the file onto an SD card? Or just drag and drop? Thanks. I really hope to get this completed soon.
bobstro said:
It does look like the download link to noogie.img.gz is broken, even on the redirected Nook Devs page.
Click to expand...
Click to collapse
hi bobstro,
i tried restoring my backup to my nook to update it to 1.1.2. i followed everything as said in http://forum.xda-developers.com/showthread.php?t=1142983
but after the restore process, my nook still has the android but it is as it was in the beginning, i mean like a fresh rooted nook(all apps gone).
is this supposed to happen? is it ok, if i update my nook with android in it?
Guyman2 said:
Thanks, i hope you can find that file. Since the directions are so vague, do i need a special program to put the file onto an SD card? Or just drag and drop? Thanks. I really hope to get this completed soon.
Click to expand...
Click to collapse
You don't need to follow those instructions, it's all automated now. You only need noogie.img to create a backup now. Now to find that image...
Edit: Here you go!
Hi there
New to all things Nook - Just bought my NST yesterday for the bargain price of £29 and am well chuffed. I have had Android phones for 3 years though and always rooted bejaysus out of them so I understand rooting, CWM, etc fairly well.
The NST is currently on 1.2.0 firmware, so having read up in this forum I DLd the 1.2.1 firmware update, NookManager and NGTAppsAttack to install in that order.
However, I have followed the instructions on B&Ns website to the letter but I can't get the 1.2.1 update to install. To be clear, I Dl'd the firmware on my Win7 PC, didn't open it at all but connected the NST by its USB cable and copied the zip file straight in to the root directory (as shown in Windows Explorer), did a safe eject and then set the nook to sleep mode. Two hours later - Still on 1.2.0.
I then tried to let it auto-update by leaving it sleeping overnight conneted to my home wifi network. - Still on 1.2.0
Any other way to force the update? I may be being stupid here and the update isn't crucial (?or isn't available for UK devices?) but I have learned to follow instructions carefully over the years and I wanted to get the latest firmware in so that I only needed to root it once!
I can boot NookManager from my SDcard (and I've already done a full backup). I was wondering if I rename the firmware file to factory.zip and use NM to do a factory restore would that work? Or is the update file a different beast that would brick the reader if forced on in this way?
All advice welcome. If I can ignore 1.2.1 and just proceed with rooting then - happy days - I'll just fire ahead and do that.
But have I been stupid and missed a basic step or what? Enlighten me please, someone!: silly:
I've also got the same issue. The update doesn't happen and if you reconnect to usb the update file is gone.
---------- Post added at 12:35 PM ---------- Previous post was at 11:43 AM ----------
I've copied the file to the root and then ejected the nook and plugged it back in straight away and the file is gone already!
i have the same problem
BelfastLad said:
Hi there
New to all things Nook - Just bought my NST yesterday for the bargain price of £29 and am well chuffed. I have had Android phones for 3 years though and always rooted bejaysus out of them so I understand rooting, CWM, etc fairly well.
The NST is currently on 1.2.0 firmware, so having read up in this forum I DLd the 1.2.1 firmware update, NookManager and NGTAppsAttack to install in that order.
However, I have followed the instructions on B&Ns website to the letter but I can't get the 1.2.1 update to install. To be clear, I Dl'd the firmware on my Win7 PC, didn't open it at all but connected the NST by its USB cable and copied the zip file straight in to the root directory (as shown in Windows Explorer), did a safe eject and then set the nook to sleep mode. Two hours later - Still on 1.2.0.
I then tried to let it auto-update by leaving it sleeping overnight conneted to my home wifi network. - Still on 1.2.0
Any other way to force the update? I may be being stupid here and the update isn't crucial (?or isn't available for UK devices?) but I have learned to follow instructions carefully over the years and I wanted to get the latest firmware in so that I only needed to root it once!
I can boot NookManager from my SDcard (and I've already done a full backup). I was wondering if I rename the firmware file to factory.zip and use NM to do a factory restore would that work? Or is the update file a different beast that would brick the reader if forced on in this way?
All advice welcome. If I can ignore 1.2.1 and just proceed with rooting then - happy days - I'll just fire ahead and do that.
But have I been stupid and missed a basic step or what? Enlighten me please, someone!: silly:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40993706&postcount=385
- Downgrade to FW 1.1
- Update to 1.2.1
- Root
In that order.
Rooting process block all future updates.
Thanks. This has worked for me.
Are there any significant differences between 1.2.0 and 1.2.1? Does 1.2.1 only work with the US ebook shop?
Sent from my GT-I9100 using xda app-developers app
cowbutt said:
Are there any significant differences between 1.2.0 and 1.2.1? Does 1.2.1 only work with the US ebook shop?
Don't know about differences - None visible to me but update as per osowiecki's instructions has worked perfectly and I'm just rooting now.
Many thanks to all.
Click to expand...
Click to collapse
cowbutt said:
Are there any significant differences between 1.2.0 and 1.2.1? Does 1.2.1 only work with the US ebook shop?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
The biggest change I've heard of is adding european wifi channels 1-13. There's a (very) little bit of discussion about other changes here.
Just realised that the downgrade to 1.1.0 -> upgrade to 1.2.1 linked above has converted my Nook to the US 1.2.1 firmware. Apparently B&N UK website now has a 1.2.1 FW update which will work with the £29 UK NSTs if you want less hassle!
Not sure of any other FW issues - poss wifi channels as another post states. More importantly, I must compare UK and US prices on books and see if I want to change back or not.....
Seriously, I presume my change might give grief if I need to do a warranty return to Curry's - but then again - what are the odds of the average sales assistant in Curry's knowing the difference??
Was also having this problem but looks like I was trying the US version of the update.
For those looking for the UK update you can find it here:
http://uk.nook.com/support/nook-simple-touch-software-updates
Thanks BelfastLad for pointing me in the right direction.
For those still having issues when using the correct firmware, try leaving your NST/G plugged in until it reboots after you've dragged the 1.2.1 firmware .zip over to it. Make sure you eject the NST/G from your computer, just leave it plugged in.
I finally managed to install the 1.2.1 update after downloading the uk version and making sure the zip file didn't have (1) or (2) next to it as I had downloaded the file a few times.
I've been waiting around for more than a week for my second "new" NST to update. It finally did so yesterday. The update has been mentioned on the Mobileread forums and one XDA member has already asked about rooting it so I thought I'd see what I could learn. You apparently won't learn anything from B&N as they either respond as if this is something that should not happen (so beware!) or they say it provides minor enhancements. There is no notice of the update on their cobweb-ridden website for the NST, no opportunity to do a manual update. It takes about a week of WiFi on all the time to catch the rolling push.
Edit: B&N has since posted the update zip on their website. For users with non-US firmwares, I recommend flashing US 1.2.1 firmware (see https://sites.google.com/site/xcdguides/nook/nookB&N). You cannot register 1.2.1 but you can update it before registering. At the "welcome" screen connect the device to your PC and transfer the update zip from B&N. Let the device sleep and it will do the update. Then you can register if you desire.
Edit: The time for OTA updates is past and I'm not sure if devices still running 1.2.1 will act up in any way. Certainly you won't be able to contact B&N servers and this could lead to connection error messages when WiFi is turned on.
What's new?
I can't claim to have done a thorough shakedown but there is no obvious change in the device on FW 1.2.2. I suspect this is a security update to keep the devices in line with new security measures on B&N servers so that owners can still spend money at B&N via the devices But I was curious to see if the cacerts.bks file had been changed since some certificates have already failed (a few of which have been fixed already by @tshoulihane to keep the Kindle app working). No joy there--not that I was surprised. B&N doesn't need cacerts to ensure correct negotiation with their servers via their own apps. Everything seems exactly the same.
To update or not to update
If, like me, you rooted your device earlier with NookManager, the update will fail and your device will spontaneously reboot. This behavior (occurring every Sunday morning as I listened to NPR on the TuneIn app) is what lead me to the conclusion that it was the update process. If you don't give a hoot about the update but you're not keen on having your device reboot on a whim, here is a fix: https://forum.xda-developers.com/showpost.php?p=34433959&postcount=3
Edit: well, that seemed to work at first, but then the weekly reboots began until I finally updated.
I don't know about other rooting methods potentially interfering with the update process.
If you just must have the update, it is likely you will need to restore your device to stock, re-register it, and leave WiFi on for a week or so until the update occurs (I left mine on the Library screen so I would know when a reboot--taking you to Home--occurred).
Edit: at this point, you will have to manually download the 1.2.2 update zip from B&N and manually install it on your device. This will require you to invoke a factory re-image as the update will not work on a rooted device. A NookManager card (even an old one) can be used to start the factory reset. Once that's done and you're at the "Welcome" screen, connect your device to your PC and drag the 1.2.2 update zip to the "Nook" drive. Let the device sleep. Come back in awhile and see if the update zip is still visible on the "Nook" drive. If it's gone, the update has been done. Now for rooting.....
Can I root it?
The short answer is "yes".
NookManager is versatile and wonderful, but it does have a bit of dust on it by now. I plan to look into that and start another thread. For now, there are two files which need to be edited in order to use it successfully with FW 1.2.2. You'll want Notepad++ or similar.
Prepare the NookManager card as described in its thread. Examine the prepared card in your PC. You'll see one partition:
NookManager
In that partition find the folder "scripts". You need to edit these two files:
install_nookmods
install_old_installer
In both files the change is the same. Near the top of the file you will find this line:
Code:
if [ "$SYSTEM" != "1.2.0" -a "$SYSTEM" != "1.2.1" ]; then
You want to change it to look like this:
Code:
if [ "$SYSTEM" != "1.2.0" -a "$SYSTEM" != "1.2.1" -a "$SYSTEM" != "1.2.2"]; then
Not sure how touchy spaces, etc., are, but try to follow what's already there. Save the files and you're good to go.
Now....there is an issue with a few apps like Opera Mobile and Tasker not wanting to install. They are the only two I have encountered so far. Here is the "fix": https://forum.xda-developers.com/showpost.php?p=76873102&postcount=5
Thanks!!
It works, Thanks! I just rooted my new NSTG with no issues.
:good:
Hi, I have followed all the steps, but when I restarted my Nook its directly booting into NOOK system instead of NookManager.
Can you please help me here, I don't see any logs to upload.
Thanks
tiniwings said:
Hi, I have followed all the steps, but when I restarted my Nook its directly booting into NOOK system instead of NookManager.
Can you please help me here, I don't see any logs to upload.
Thanks
Click to expand...
Click to collapse
If it's not booting off the card then one or more of the files on the card must be damaged. Rather than trying to figure it out, it would be easier to just make a new card (try formatting your old one and writing the image again). I wouldn't even make the changes needed for 1.2.2 until you establish whether the card boots. You don't have to use NookManager, just see if it will boot and then exit if it does. Then you can make the needed changes and try again. If it doesn't boot after you've done the minimal edits, then somehow the card has been mishandled. Be sure to eject the card safely from your PC.
nmyshkin said:
If it's not booting off the card then one or more of the files on the card must be damaged. Rather than trying to figure it out, it would be easier to just make a new card (try formatting your old one and writing the image again). I wouldn't even make the changes needed for 1.2.2 until you establish whether the card boots. You don't have to use NookManager, just see if it will boot and then exit if it does. Then you can make the needed changes and try again. If it doesn't boot after you've done the minimal edits, then somehow the card has been mishandled. Be sure to eject the card safely from your PC.
Click to expand...
Click to collapse
Thanks, I have tried multiple times (Format and reload) but till it does not boot into sdcard. I will try once again from scratch in the weekend.
Great!
Its works perfectly, i rooted my nook simple one touch with update 1.2.2
I am in the UK and have a Nook Simple Touch Glow-light. It was on f/w version 1.2.1 and would not connect to the internet. I downloaded the nook_1_2_update.zip from the USA B&N site at copied it to the Nook using the USB connection from my PC. However it would not update to 1.2.2, the zip file just disappears.
I then used the excellent Nook Region Changer, and changed the Nook to USA region. I again wrote the nook_1_2_update.zip file to the Nook using the USB connection, and after the next wake up cycle on my nook it updated to 1.2.2 and allowed me to register on the USA B&N website and browse books, etc, but not do any social media things, and also I cannot buy books or download free ones as I do not have a USA home address, which is required.
I again used Nook Region Changer and put my nook back to UK version, but this process 'lost' the 1.2.2 update so I am back to square one.
Apparently the two firmware updates to move a USA NST/G to FW 1.2.2 (downloaded from USA B&N site) and the one to ove a UK NST/G to 1.2.2 (downloaded from the now defunct UK B&N website) are different and incompatible.
My questions is "Does anyone have a copy of the UK version of the nook_1_2_update.zip file please?"
I would like to thank you guys at XDA for your very comprehensive and detailed information about the NST/G, and the tools supplied.
due23 said:
I am in the UK and have a Nook Simple Touch Glow-light. It was on f/w version 1.2.1 and would not connect to the internet. I downloaded the nook_1_2_update.zip from the USA B&N site at copied it to the Nook using the USB connection from my PC. However it would not update to 1.2.2, the zip file just disappears.
I then used the excellent Nook Region Changer, and changed the Nook to USA region. I again wrote the nook_1_2_update.zip file to the Nook using the USB connection, and after the next wake up cycle on my nook it updated to 1.2.2 and allowed me to register on the USA B&N website and browse books, etc, but not do any social media things, and also I cannot buy books or download free ones as I do not have a USA home address, which is required.
I again used Nook Region Changer and put my nook back to UK version, but this process 'lost' the 1.2.2 update so I am back to square one.
Apparently the two firmware updates to move a USA NST/G to FW 1.2.2 (downloaded from USA B&N site) and the one to ove a UK NST/G to 1.2.2 (downloaded from the now defunct UK B&N website) are different and incompatible.
My questions is "Does anyone have a copy of the UK version of the nook_1_2_update.zip file please?"
I would like to thank you guys at XDA for your very comprehensive and detailed information about the NST/G, and the tools supplied.
Click to expand...
Click to collapse
There will never be another update other than the US one you have already tried. I think you may be expecting too much from the device at this point. A made-up USA address might be of some use, but I doubt it. Even with US firmware from the US I could never get the Google stuff to work and I just assume that B&N never cared much about updating URLs and APIs for the social media stuff and just wanted to be sure US customers could still purchase books. But that's my somewhat cynical take.
Anyway, you can always go back to US 1.2.2 and then delete ALL the B&N stuff and build your own reader if that suits you. See here: https://forum.xda-developers.com/nook-touch/general/nst-g-removing-bn-apps-t3972941
Thanks for the quick reply, I will do as you suggest. The Nook is a reasonable little reader and the glowlight is a nice feature.
You are quite right, I think I am expecting a little too much from it.
All the best,
Alan
Hello
I'm looking for update 1.2.2 zip - tried to download from b&n website but its faulty.
I'm trying to turn nook into gps device but cant connect to internet (connecting to wifi but shows network-related error)
I hope version 1.2.2 will fix it.
Thank you
fdxx said:
Hello
I'm looking for update 1.2.2 zip - tried to download from b&n website but its faulty.
I'm trying to turn nook into gps device but cant connect to internet (connecting to wifi but shows network-related error)
I hope version 1.2.2 will fix it.
Thank you
Click to expand...
Click to collapse
Faulty? What happens?
Did you remember to do a factory reset before trying the update? You cannot update a rooted device with that zip.
nmyshkin said:
You cannot update a rooted device with that zip.
Click to expand...
Click to collapse
maybe thats the problem... I need to find original 1.2.1 (or something) software first and then update...
region change to US is the way to go with 1.2.2 update
fdxx said:
region change to US is the way to go with 1.2.2 update
Click to expand...
Click to collapse
Well, yes. I should have asked that question also...
Where does one download the 1.2.2.zip file? It's not on B&N anywhere I can find.
Thank you.
jteed said:
Where does one download the 1.2.2.zip file? It's not on B&N anywhere I can find.
Thank you.
Click to expand...
Click to collapse
They didn't make it easy.
Go here: https://help.barnesandnoble.com/app...212/~/having-trouble-connecting-to-your-nook?
Scroll down to a list of the various Nook models and click on Nook Simple Touch: 1.2.2
That will drop you down farther on the same page where you'll find manual installation instructions and below that, little pictures of the devices with the word "Download" under each.
Please, someone has the files? The links are down!!!
Thank you
dant3 said:
Please, someone has the files? The links are down!!!
Thank you
Click to expand...
Click to collapse
This is a direct link. I just tried it.
https://su.barnesandnoble.com/nook/nook2/1.2.2/351e26527e80156183e74be2da2ce89f/nook_1_2_update.zip
due23 said:
I am in the UK and have a Nook Simple Touch Glow-light. It was on f/w version 1.2.1 and would not connect to the internet. I downloaded the nook_1_2_update.zip from the USA B&N site at copied it to the Nook using the USB connection from my PC. However it would not update to 1.2.2, the zip file just disappears.
I then used the excellent Nook Region Changer, and changed the Nook to USA region. I again wrote the nook_1_2_update.zip file to the Nook using the USB connection, and after the next wake up cycle on my nook it updated to 1.2.2 and allowed me to register on the USA B&N website and browse books, etc, but not do any social media things, and also I cannot buy books or download free ones as I do not have a USA home address, which is required.
I again used Nook Region Changer and put my nook back to UK version, but this process 'lost' the 1.2.2 update so I am back to square one.
Apparently the two firmware updates to move a USA NST/G to FW 1.2.2 (downloaded from USA B&N site) and the one to ove a UK NST/G to 1.2.2 (downloaded from the now defunct UK B&N website) are different and incompatible.
My questions is "Does anyone have a copy of the UK version of the nook_1_2_update.zip file please?"
I would like to thank you guys at XDA for your very comprehensive and detailed information about the NST/G, and the tools supplied.
Click to expand...
Click to collapse
I was having this exact problem but I couldn't use the Nook Region Changer because step #4 is to reset the device which I couldn't do because it couldn't connect to the internet (RAGE!!!). I have spent days trying to sort this out it's absolutely ridiculous.
I have finally found this page: https://heeed.net/resetting-a-nook-simple-touch/ which has helped me to reset it to factory settings and get it working to a basic level again without being registered.
I'm furious really that B&N won't give us a working update so we can at least use Wifi on our devices, WTF?! Disgusting customer service! Anyway, hope that link helps someone else!
Birdish said:
I was having this exact problem but I couldn't use the Nook Region Changer because step #4 is to reset the device which I couldn't do because it couldn't connect to the internet (RAGE!!!). I have spent days trying to sort this out it's absolutely ridiculous.
I have finally found this page: https://heeed.net/resetting-a-nook-simple-touch/ which has helped me to reset it to factory settings and get it working to a basic level again without being registered.
I'm furious really that B&N won't give us a working update so we can at least use Wifi on our devices, WTF?! Disgusting customer service! Anyway, hope that link helps someone else!
Click to expand...
Click to collapse
Well, I also have learned a bit since my original post. See here: https://forum.xda-developers.com/t/nst-g-dealing-with-non-us-aka-uk-devices-in-2021.4233411/
I think there are options there which may give you a better result.
I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?
sinlog said:
I bought a used nst glowlight (bnrv350), I made a backup, and then I tried to root using glownooter, but had a limited success : I could not install google market or opera mobile.
So I tried to restore the backup, but after "read forever, your nook is starting up", nothing happens, the message just stays there. I can boot with the back button, but it does the same.
I then tried to restore the factory image several times, using all the methods I could find in the internet, but it does the same as above. It has been going on for 24 hours.
The problem might have originated when I could not use winimage in my windows 10 computer to make the backup, and I used windows xp in a virtualbox in my linux computer instead. I used also dd, but I am afraid I don't remember the exact order. The backup size is 426.8 MB.
I reverted back to windows 10 with win32diskimager, with the same result.
Can anything be done ?
Click to expand...
Click to collapse
That backup is too large, I think. Should be more in the neighborhood of 250 MB? Have you tried the factory re-image where you just see the booting up screen and then hold down the two bottom hardware buttons until you get a prompt?
It's difficult--but not impossible--to damage the factory image unless you've been messing with the partitions. If that method does not get you there, consider making a NookManager card and trying to access the re-image routine from its menu.
Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.
sinlog said:
Thank you for your reply. I just used nookManager. After 5 seconds, it said the backup was successful, but there was no backup in the card. Similarly, it said that rooting was successful, but when I removed the card, it did the same as before : "starting up..." and it stays there.
Do you have another idea ? I downloaded the 1.2.2 update from the b&n site. Can nookManager install it ?
PS: The nook was already 1.2.2
Yes, I used the two lower buttons trick.
Click to expand...
Click to collapse
5 seconds is not enough time for NookManager to correctly make a backup. And, backups can only be seen on the card if you connect your NSTG to your PC while NookManager is running. Otherwise the partition is invisible.
It's hard to know since I have no experience with the NSTG. If it were an NST I would suggest that you perform the region change flash, but it's not clear if that will remove your light function or, indeed, if the flash is deep enough to rewrite the areas of your device that appear to be preventing boot. AFAIK there are no ROM images for the NSTG available. But there might be. Somewhere.
I guess if you have exhausted all the possibilities, rather than trashing the device I would try the region change (just flash the US firmware again--I assume that's what's on there already). It may or may not preserve the glowlight capability, but it might at least produce a functioning e-reader. But only as a last resort.
Edit: Hmm.... seems like I've been down this winding road before: https://forum.xda-developers.com/showpost.php?p=72551413&postcount=57
But I emphasize that this process worked for a plain NST, not the NSTG, so it is an absolute last resort (and might not work anyway because you could have a completely different situation). Next thing is to look at the innards of the 1.1 updater and see if Glowlight updates could be substituted...
O.K. So here is a thread that contains a link to an NSTG image and the instructions to write to your device (read down in the thread).
https://forum.xda-developers.com/showthread.php?t=2608815
What "may" happen: your device could end up with a mismatched serial number and or MAC address depending on how this image was made. There is information on this forum for correcting the MAC address. Just a disclaimer. I don't know. IF this is successful, you can then do a manual update to 1.2.2 and then root with the updated NookManager. I've checked the link to the image and it is still good. I got a file that is about 245 MB--seems about right. Presumably you use the image in place of your backup in the restoring process described in the thread.
I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?
sinlog said:
I am very grateful for your help, but I am afraid I need more. The nook is now functioning and I might not have done it without your hints. As you suspected, the serial number and mac address have changed (I wrote them down before all this). I suppose that's why it did not automatically upgrade to 1.2.2 . Also the device says it's connected to the internet, but it doesn't seem to be.
I searched xda (nstg mac address, nstg serial number), but I didn't find anything meaningful to me (there are posts by Renate and by ros87 but too complex). Can you help, please ?
Click to expand...
Click to collapse
Oy.
I didn't think you would act so rashly with all my disclaimers. Well, it's done. I actually don't think the MAC address is a big deal unless you begin to have issues.
Did you actually manage to register? If so then the serial number must not currently be in use and the change you effected was deep enough to pass muster. If not....well battery life is said to be shorter for devices that have skipped registration.
Correcting the MAC address is described (sort of) here: https://forum.xda-developers.com/showthread.php?t=1483600
As far as I can guess it involves editing a hex file. Doable, but maybe not needed. There is no way to correct the serial number. It is heavily encrypted with private keys. Again, if you managed to register then this is all moot.
How are you judging lack of internet connectivity?
I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2
sinlog said:
I was not given the opportunity to register and I don't care about registration, but I'd like to have connectivity. The link you just gave me is for the ros87's thread that I mentioned, and I don't know how to use it. So I suppose I cannot upgrade to 1.2.2 . Should I root the device ?
PS : ros87's last activity was 2 years ago
EDIT : I copied nook_1_2_update.zip in the device and it was installed. I have now 1.2.2
Click to expand...
Click to collapse
You didn't answer my question about connectivity. Are you not able to make a connection? With only the stock device there is nothing to connect to other than B&N. What does it say about "Owner" in the Settings?
Yes, you should root. Be sure to use the NookManager update or it won't work.
Before we even think about the MAC address issue you need root access and some way to tell if you actually have an internet connection. That means some kind of functioning browser, etc.
Do you still have that weird backup? If so, keep it safe somewhere. You may want that someday.
I tried to download a book and I got this : Unable to download, Internal error...
I can ping the nook from the computer.
I will look into rooting the device in 2 or 3 hours and then post again. I suppose this is what you're referring to :
https://forum.xda-developers.com/nook-touch/development/nst-g-updating-nookmanager-t3873048
Thank you for your patience with me.
sinlog said:
I tried to download a book and I got this : Unable to download, Internal error...
Click to expand...
Click to collapse
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?
nmyshkin said:
There is an entire galaxy of mystery contained in that statement. Download from where? Download with what? Do you have an sdcard inserted for storage?
Click to expand...
Click to collapse
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.
sinlog said:
I meant to download a book from the home page of the nook, where it says New reads. I am still unrooted and I don't leave an sdcard inserted.
Click to expand...
Click to collapse
Hmm... I'm surprised there are any books populating that section at all since the device is not registered. In any case, that is no test of connectivity since without registration the NSTG will spit out all kinds of generic messages about connections and failures if you attempt anything that requires access of B&N servers--like buying/downloading a book (which you can't do unless you are registered).
Rooted with nookManager updated. Opera mobile needs to be reinstalled. I can connect to the computer using es file explorer, so wifi is ok. BUT I can't use nookManager because I can't read the icon labels. I'll restore the backup tomorrow and I will try another rooting method. There are 2 more, I think : tiny and glownooter. Are there others ?
sinlog said:
BUT I can't use nookManager because I can't read the icon labels.
Click to expand...
Click to collapse
? Do you mean ADW Launcher? You can fix the icon label issue in the Settings. As I recall the default font color is white. That needs to be changed to black. The size can also be changed. Depending on what icon style you pick the label will either be on one line or, if longer, on two. LOTS of Settings in ADW. Don't write it off without spending some time working with it.
Sorry, I used glownooter. It's a lot like touchnooter, with which I am familiar. I still have to sign in to my google account and to install opera mobile. I'll be back when finished.
Opera mobile is installed and working. I still can't sign in to google but I can use yalp store and that's good. Thanks again, nmyshkin, you saved my nook glowlight.