Related
Hello guys if u have bricked lg g2 by flashing wrong firmware and cant go back to stock because the lg flashtool recognises your device as different model follow these steps.
open your firmware with hx editor, right click on white space, search your model(ex. i changed mine is Ls980 and edit the following lines
4.xVLG-LS980....
....LS980ZVE....
to look like this
4.xVLG-L01F.....
....L01f10C.....
remember save all then save as
use universal Dll file for your flashtool
Tengo el mismo problema
kimush said:
Hello guys i have hard bricked my lg g2 Ls980 by flashing wrong firmware and i cant go back to stock because the lg flashtool recognises my phone as L01F, pls help.
Click to expand...
Click to collapse
Lamentablemente tengo el mismo problema y todo por instalar el maldito lolipoop [Lollipop][Stock]Grola ROM 5.0.1 V2 [10 MAR][D8xx/VS980/L01F] se suponia que hay un enlace con la version V2 y dice ahi Version V2 compatible con D80x y otros y el mio es un D800 y decidi instalarlo, instalo como que fuera cualquier instalacion desde un zip. pero cuando reinicio se quedo en fastboot mode, despues intente hacer un unbrick y ahora resulta que me detecta el telefono como un comodoro osea L01F que desgracia ... Alguna solucion amigos
lolivet said:
Lamentablemente tengo el mismo problema y todo por instalar el maldito lolipoop [Lollipop][Stock]Grola ROM 5.0.1 V2 [10 MAR][D8xx/VS980/L01F] se suponia que hay un enlace con la version V2 y dice ahi Version V2 compatible con D80x y otros y el mio es un D800 y decidi instalarlo, instalo como que fuera cualquier instalacion desde un zip. pero cuando reinicio se quedo en fastboot mode, despues intente hacer un unbrick y ahora resulta que me detecta el telefono como un comodoro osea L01F que desgracia ... Alguna solucion amigos
Click to expand...
Click to collapse
Hi pal, u must trick your D800 firmware to think its L01F by editing some lines with Hex Editor
open your firmware with hx editor, right click on white space, search your model(ex. i changed mine is Ls980 and edit the following lines
4.xVLG-LS980....
....LS980ZVE....
to look like this
4.xVLG-L01F.....
....L01f10C.....
remember save all then save as
use universal Dll file for your flashtool
let me know how it went
thnxxxx
kimush said:
Hi pal, u must trick your D800 firmware to think its L01F by editing some lines with Hex Editor
open your firmware with hx editor, right click on white space, search your model(ex. i changed mine is Ls980 and edit the following lines
4.xVLG-LS980....
....LS980ZVE....
to look like this
4.xVLG-L01F.....
....L01f10C.....
remember save all then save as
use universal Dll file for your flashtool
let me know how it went
Click to expand...
Click to collapse
finally i handle this problem thx my bro
kimush said:
Hi pal, u must trick your D800 firmware to think its L01F by editing some lines with Hex Editor
open your firmware with hx editor, right click on white space, search your model(ex. i changed mine is Ls980 and edit the following lines
4.xVLG-LS980....
....LS980ZVE....
to look like this
4.xVLG-L01F.....
....L01f10C.....
remember save all then save as
use universal Dll file for your flashtool
let me know how it went
Click to expand...
Click to collapse
Dammn!! Dudee you saved my LG G2 D805 , it was easy after all haha! Was looking for solution like 5 hours an then i saw you method and worked! Thank you!
cant flash
thanks to DanielCarbajal96 and kimush
the problem was solved ,
kimush said:
Hello guys if u have bricked lg g2 by flashing wrong firmware and cant go back to stock because the lg flashtool recognises your device as different model follow these steps.
open your firmware with hx editor, right click on white space, search your model(ex. i changed mine is Ls980 and edit the following lines
4.xVLG-LS980....
....LS980ZVE....
to look like this
4.xVLG-L01F.....
....L01f10C.....
remember save all then save as
use universal Dll file for your flashtool
Click to expand...
Click to collapse
it really works on a D800... THNAK YOU MEN!!!
how to edit tot files
kimush said:
Hello guys if u have bricked lg g2 by flashing wrong firmware and cant go back to stock because the lg flashtool recognises your device as different model follow these steps.
open your firmware with hx editor, right click on white space, search your model(ex. i changed mine is Ls980 and edit the following lines
4.xVLG-LS980....
....LS980ZVE....
to look like this
4.xVLG-L01F.....
....L01f10C.....
remember save all then save as
use universal Dll file for your flashtool
Click to expand...
Click to collapse
today came across same problem
pls let me know how to edit tot file?
or if you can give me detailed process with required tools
swapcall said:
today came across same problem
pls let me know how to edit tot file?
or if you can give me detailed process with required tools
Click to expand...
Click to collapse
Download firmware files ,
your phones stock one ( ex. for me is LS980ZVE )
and the one that it says it has changed, ( in my case it was L01f10C )
then edit some lines in your phones stock firmware with hex editor with the other firmware that the phone has changed
for the flashtool to accept it.
Follow example above which lines to edit , good luck
Hello, I need the backup of the persist folder of the Moto G5 Plus (hopefully the XT1680 or LATAM), since I have lost the IMEI (when I look for it, it appears 0). When I returned from 8.1.0 to 7.0 (stock), the persist folder was erased, along with the IMEI and the bands. When I started the cell phone, it had no sign of any kind, search forums and I found a person who said that the persist folder was responsible for this, I did recovery by TWRP of the persist of a Moto G4, and now I only have 3G / H + , and I would like to request the file here. I found some on clangsm.com, but at least 200 messages are needed to download some file, so I can not. It would be very helpful.
--
Hola, necesito el backup de la carpeta persist del Moto G5 Plus (ojalá del XT1680 o de LATAM), ya que he perdido el IMEI (cuando lo busco, aparece 0). Al volver de 8.1.0 a 7.0 (stock), se me borró la carpeta persist, junto al IMEI y las bandas. Al iniciar el celular, este no tenía señal de ningun tipo, busque en foros y encontré una persona que decía que la carpeta persist era la responsable de esto, hice recuperación por TWRP del persist de un Moto G4, y ahora solo tengo 3G/H+, y quisiera pedir aquí el archivo. Encontré unos en clangsm.com, pero ahí se necesitan mínimo 200 mensajes para descargar algún archivo, por lo que no puedo. Sería de mucha ayuda.
Thanks and sorry for my bad English.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Manda mensaje privado
Hola
itsluquis said:
Hello, I need the backup of the persist folder of the Moto G5 Plus (hopefully the XT1680 or LATAM), since I have lost the IMEI (when I look for it, it appears 0). When I returned from 8.1.0 to 7.0 (stock), the persist folder was erased, along with the IMEI and the bands. When I started the cell phone, it had no sign of any kind, search forums and I found a person who said that the persist folder was responsible for this, I did recovery by TWRP of the persist of a Moto G4, and now I only have 3G / H + , and I would like to request the file here. I found some on clangsm.com, but at least 200 messages are needed to download some file, so I can not. It would be very helpful.
--
Hola, necesito el backup de la carpeta persist del Moto G5 Plus (ojalá del XT1680 o de LATAM), ya que he perdido el IMEI (cuando lo busco, aparece 0). Al volver de 8.1.0 a 7.0 (stock), se me borró la carpeta persist, junto al IMEI y las bandas. Al iniciar el celular, este no tenía señal de ningun tipo, busque en foros y encontré una persona que decía que la carpeta persist era la responsable de esto, hice recuperación por TWRP del persist de un Moto G4, y ahora solo tengo 3G/H+, y quisiera pedir aquí el archivo. Encontré unos en clangsm.com, pero ahí se necesitan mínimo 200 mensajes para descargar algún archivo, por lo que no puedo. Sería de mucha ayuda.
Thanks and sorry for my bad English.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Click to expand...
Click to collapse
Podría pasarte mi carpeta pero que hay de mi imei? No se Clonaría?
itsluquis said:
Hello, I need the backup of the persist folder of the Moto G5 Plus (hopefully the XT1680 or LATAM), since I have lost the IMEI (when I look for it, it appears 0). When I returned from 8.1.0 to 7.0 (stock), the persist folder was erased, along with the IMEI and the bands. When I started the cell phone, it had no sign of any kind, search forums and I found a person who said that the persist folder was responsible for this, I did recovery by TWRP of the persist of a Moto G4, and now I only have 3G / H + , and I would like to request the file here. I found some on clangsm.com, but at least 200 messages are needed to download some file, so I can not. It would be very helpful.
--
Hola, necesito el backup de la carpeta persist del Moto G5 Plus (ojalá del XT1680 o de LATAM), ya que he perdido el IMEI (cuando lo busco, aparece 0). Al volver de 8.1.0 a 7.0 (stock), se me borró la carpeta persist, junto al IMEI y las bandas. Al iniciar el celular, este no tenía señal de ningun tipo, busque en foros y encontré una persona que decía que la carpeta persist era la responsable de esto, hice recuperación por TWRP del persist de un Moto G4, y ahora solo tengo 3G/H+, y quisiera pedir aquí el archivo. Encontré unos en clangsm.com, pero ahí se necesitan mínimo 200 mensajes para descargar algún archivo, por lo que no puedo. Sería de mucha ayuda.
Thanks and sorry for my bad English.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Click to expand...
Click to collapse
Have you tried the following?
HTML:
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
TA1513 said:
Have you tried the following?
HTML:
fastboot erase modemst1fastboot erase modemst2fastboot reboot
Click to expand...
Click to collapse
Yes, i tried
Enviado desde mi Moto G (5) Plus mediante Tapatalk
itsluquis said:
Yes, i tried
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Click to expand...
Click to collapse
can you just try erase above again without flushing the file?
itsluquis said:
Hello, I need the backup of the persist folder of the Moto G5 Plus (hopefully the XT1680 or LATAM), since I have lost the IMEI (when I look for it, it appears 0). When I returned from 8.1.0 to 7.0 (stock), the persist folder was erased, along with the IMEI and the bands. When I started the cell phone, it had no sign of any kind, search forums and I found a person who said that the persist folder was responsible for this, I did recovery by TWRP of the persist of a Moto G4, and now I only have 3G / H + , and I would like to request the file here. I found some on clangsm.com, but at least 200 messages are needed to download some file, so I can not. It would be very helpful.
--
Hola, necesito el backup de la carpeta persist del Moto G5 Plus (ojalá del XT1680 o de LATAM), ya que he perdido el IMEI (cuando lo busco, aparece 0). Al volver de 8.1.0 a 7.0 (stock), se me borró la carpeta persist, junto al IMEI y las bandas. Al iniciar el celular, este no tenía señal de ningun tipo, busque en foros y encontré una persona que decía que la carpeta persist era la responsable de esto, hice recuperación por TWRP del persist de un Moto G4, y ahora solo tengo 3G/H+, y quisiera pedir aquí el archivo. Encontré unos en clangsm.com, pero ahí se necesitan mínimo 200 mensajes para descargar algún archivo, por lo que no puedo. Sería de mucha ayuda.
Thanks and sorry for my bad English.
Enviado desde mi Moto G (5) Plus mediante Tapatalk
Click to expand...
Click to collapse
I happen exactly the same when I returned to stock after testing AICP, my imei left 0, any solution?
TA1513 said:
can you just try erase above again without flushing the file?
Click to expand...
Click to collapse
How? I put my phone in fastboot, and i tried with these comands. My phone reboot and the signals gone. I restore the persist from Moto G4 Plus and i have signal (only 3G, 4G/LTE not work), but IMEI continue in 0.
IMEI sumiu
tô na mesma situação não sei mais oq fazer
SOLUTION: I had this problem and fixed it by 1. following the fastboot erase modem instructions in this thread, and 2. Restoring a backup of the stock firmware I had saved on my PC. I moved it over from the PC to the TWRP backup folder on the phone, restored via TWRP and violá, LTE worked again, even after flashing ACIP 8.1.
hithekillswitch said:
SOLUTUON: I had this problem and fixed it by 1. following the fastboot erase modem instructions in this thread, and 2. Restoring a backup of the stock firmware I had saved on my PC. I moved it over from the PC to the TWRP backup folder on the phone, restored via TWRP and violá, LTE worked again, even after flashing ACIP 8.1.
Click to expand...
Click to collapse
what would be the possibility of you providing help to me and the friends above who have the same problem?
deleted
Deleted
I'm having the same problem.
I was on Validus Oreo ROM after that I flashed Stock ROM, now I'm left with '0' IMEI number.
I already tried the "erase modemst" commands, but still no luck.
I installed the latest Omni Rom and IMEI got restored but only 3g/2g is working.
Any help is appreciated!
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
hithekillswitch said:
SOLUTION: I had this problem and fixed it by 1. following the fastboot erase modem instructions in this thread, and 2. Restoring a backup of the stock firmware I had saved on my PC. I moved it over from the PC to the TWRP backup folder on the phone, restored via TWRP and violá, LTE worked again, even after flashing ACIP 8.1.
Click to expand...
Click to collapse
Which partitions you had backed up?
Do you have a backup of stock from before this happened?
so many people are having those issues. someone found a solution in the tg group. i will tell it here tomorrow.
DOnt go full stock, like EVER
hithekillswitch said:
Do you have a backup of stock from before this happened?
Click to expand...
Click to collapse
Yes I do.
-z3r0- said:
Yes I do.
Click to expand...
Click to collapse
You are home free then. Move it to the backup folder in twrp, wipe everything except internal storage, and restore the backup. You may have to first take a backup in twrp to create the backup folder if you do not have it. Good luck!
---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ----------
-z3r0- said:
I'm having the same problem.
I was on Validus Oreo ROM after that I flashed Stock ROM, now I'm left with '0' IMEI number.
I already tried the "erase modemst" commands, but still no luck.
I installed the latest Omni Rom and IMEI got restored but only 3g/2g is working.
Any help is appreciated!
---------- Post added at 06:40 PM ---------- Previous post was at 06:39 PM ----------
Which partitions you had backed up?
Click to expand...
Click to collapse
I restored all except system image, logo and recovery
anshuman_1 said:
so many people are having those issues. someone found a solution in the tg group. i will tell it here tomorrow.
DOnt go full stock, like EVER
Click to expand...
Click to collapse
Is there a solution if I do not have a backup copy of anything?
hithekillswitch said:
SOLUTION: I had this problem and fixed it by 1. following the fastboot erase modem instructions in this thread, and 2. Restoring a backup of the stock firmware I had saved on my PC. I moved it over from the PC to the TWRP backup folder on the phone, restored via TWRP and violá, LTE worked again, even after flashing ACIP 8.1.
Click to expand...
Click to collapse
Hi, u can share this backup or send me to PM?
Hello, go here and you can unlock bootloader and install root, twrp and much more ...
Keep in mind that the following actions erase your data, make backup, please your data (if they are very important to you)
1 Download my archive new flash.rar . Unpack archive any folder at you're PC.
Go to settings > About phone > click 7 times on build number, next step go to developer option and enable OEM Unlocking and USB debugging.
2 Now we need reboot to EDL. Use [0] Reboot to EDL.bat. After that rename com port - [1] Flash aboot.bat, (you can see your COM port in device manager).
emmcdl.exe -p COM(your com port) -f prog_emmc_firehose_8940.mbn -b aboot aboot1.bin
Click to expand...
Click to collapse
Rename and save. And flash, just press on reedited bat file - [1] Flash aboot.bat
3 Turn on your smartphone as recovery (Vol.Up and Power). Now you see Chinese FTM. So you have done everything right, and the most difficult behind.
Click on next bat file [2] oem unlock.bat . The phone will go to the fastbut mode and he unlock bootloader. You will have to see a ring (See? Alright)
Once you have to re-enter the phone into recovery mode (Vol.Up+Power). You're back in Chinese FTM mode, and you go use [3] Final flash.bat.
4 After the last step ([3] Final flash.bat) you see TWRP. Go to Wipe , and format data and tape YES and press OK. Reboot to recovery.
Now TWRP understands encryption phone. And now you can install root (Use only magisk 16-16.7)
Use method 2 much better for you.
https://4pda.ru/forum/index.php?s=&showtopic=846041&view=findpost&p=84474248
https://tinyurl.com/y4rcchs5 <<< alternative link
Its twrp for A0622 same with A6? And can i flash supersu.zip via twrp only? Because im not pro or understand bout magisk things
0622 is a6 lite?
No it's voyage 5 but using firmware and kernel A6 because it's A0622 model and it's same like A6 lite, and i think i buy unlock phone because its distribute waranty and check in unlock checker it's said Unlock, but how i installing twrp on my phone or installing super su, becauss everytime i unlocked using adb your method always SAHARA FAIL
---------- Post added at 09:20 AM ---------- Previous post was at 09:18 AM ----------
FYI, i just found rooting method for ZTE VOYAGE 5 A0622 in chinese site but it's buy using coins and after click buy or paid my id is banned, don't know why... Lol but i hope my device is getting root so soon because i don't like android phone if it's not rooted
Sort through the firehose (programmers), there is a collection > https://github.com/deadman96385/zte_programmers
And check command:
emmcdl.exe -p COM20 -f prog_emmc_firehose_8940.mbn -gpt
Click to expand...
Click to collapse
COM20 - your EDL (9008) port
prog_emmc_firehose_8940.mbn - name programmer
P.S. If it works, you should see a partition list.
p.s.s axon 9 pro have same problem.
Thanks and a request
Hello, I want to thank you for your work, I did what you say in your post and everything went perfect, now I have TWRP in my A6.
I want to ask you if you have any custom ROM to install on the A6, I tried to use a different ROM from the factory ROM and it didn't work and now I can't reinstall the original Rom because it asks me for the original recovery and I can't find it anywhere, can you help me please?
Thank you.
lyoks said:
Hello, go here and you can unlock bootloader and install root, twrp and much more ...
Keep in mind that the following actions erase your data, make backup, please your data (if they are very important to you)
1 Download my archive new flash.rar . Unpack archive any folder at you're PC.
Go to settings > About phone > click 7 times on build number, next step go to developer option and enable OEM Unlocking and USB debugging.
2 Now we need reboot to EDL. Use [0] Reboot to EDL.bat. After that rename com port - [1] Flash aboot.bat, (you can see your COM port in device manager).
Rename and save. And flash, just press on reedited bat file - [1] Flash aboot.bat
3 Turn on your smartphone as recovery (Vol.Up and Power). Now you see Chinese FTM. So you have done everything right, and the most difficult behind.
Click on next bat file [2] oem unlock.bat . The phone will go to the fastbut mode and he unlock bootloader. You will have to see a ring (See? Alright)
Once you have to re-enter the phone into recovery mode (Vol.Up+Power). You're back in Chinese FTM mode, and you go use [3] Final flash.bat.
4 After the last step ([3] Final flash.bat) you see TWRP. Go to Wipe , and format data and tape YES and press OK. Reboot to recovery.
Now TWRP understands encryption phone. And now you can install root (Use only magisk 16-16.7)
Use method 2 much better for you.
https://4pda.ru/forum/index.php?s=&showtopic=846041&view=findpost&p=84474248
https://tinyurl.com/y4rcchs5 <<< alternative link
Click to expand...
Click to collapse
good tutorial friend I already have the twrp on the mobile but I don't know how to root it, you will have the apk you name because I can't find it thanks
You need intall magisk v16.0
lyoks said:
You need intall magisk v16.0
Click to expand...
Click to collapse
im done bro twpr and root i love bro
el_nabo said:
Hello, I want to thank you for your work, I did what you say in your post and everything went perfect, now I have TWRP in my A6.
I want to ask you if you have any custom ROM to install on the A6, I tried to use a different ROM from the factory ROM and it didn't work and now I can't reinstall the original Rom because it asks me for the original recovery and I can't find it anywhere, can you help me please?
Thank you.
Click to expand...
Click to collapse
Custom ROMS does not exist for model A6. Unfortunately no one wants to make fully working ROMS. But you can port it yourself, using your knowledge if you have it.
lyoks said:
Custom ROMS does not exist for model A6. Unfortunately no one wants to make fully working ROMS. But you can port it yourself, using your knowledge if you have it.
Click to expand...
Click to collapse
im noob :c and rom stock are good is fast no lag
andresh-5 said:
im noob :c and rom stock are good is fast no lag
Click to expand...
Click to collapse
Well, you can learn by yourself, it is not difficult. In addition, you can create your own stock firmware. Delete gapps, priv-app and more...
lyoks said:
well, you can learn by yourself, it is not difficult. In addition, you can create your own stock firmware. Delete gapps, priv-app and more...
Click to expand...
Click to collapse
yes bro all delete the trash app :d
Backup
lyoks said:
Custom ROMS does not exist for model A6. Unfortunately no one wants to make fully working ROMS. But you can port it yourself, using your knowledge if you have it.
Click to expand...
Click to collapse
Dear Lyoks
Unfortunately for me my knowledge is not enough for that, that's why I ask for your help, there are two things that I can think of, get the original ZTE recovery for the A6 or get the original ROM but in zip format and flash it with the TWRP , this would have to be using some backup that was created using the TWRP, will I explain?
Do you have any backup you could send me? I would greatly appreciate it.
Thank you.
el_nabo
el_nabo said:
Dear Lyoks
Unfortunately for me my knowledge is not enough for that, that's why I ask for your help, there are two things that I can think of, get the original ZTE recovery for the A6 or get the original ROM but in zip format and flash it with the TWRP , this would have to be using some backup that was created using the TWRP, will I explain?
Do you have any backup you could send me? I would greatly appreciate it.
Thank you.
el_nabo
Click to expand...
Click to collapse
amigo antes de intenter cambiar la rom tenias q hacer tu bakcup yo lo tengo que version es tu movil el mio es el de claro... y es de 1 solo sim
andresh-5 said:
amigo antes de intenter cambiar la rom tenias q hacer tu bakcup yo lo tengo que version es tu movil el mio es el de claro... y es de 1 solo sim
Click to expand...
Click to collapse
Hello, I appreciate your interest, I will write in Spanish and English to not to break the forum's rules.
I have to clarify that I did try to backup the ROM twice but errors appeared and didn't continue with the process, that's why I don't have the original ROM.
I am very interested in your backup, if you could share a link to download it it would be very good, my phone is also a single SIM and at this point I risk trying anything to recover the equipment.
Thank you again for your help.
Hola, aprecio tu interés, voy a escribir en español e ingles para no romper las reglas del foro.
Tengo que aclarar que sí intenté hacer el respaldo de la ROM dos veces pero aparecían errores y no continuaba con el proceso, es por eso que no tengo la ROM original.
Me interesa mucho tu respaldo, si pudieras compartir algún enlace para poder descargarlo sería muy bueno, mi teléfono también es de un solo SIM y a estas alturas me arriesgo a probar lo que sea para recuperar el equipo.
Gracias de nuevo por tú interés.
el_nabo said:
Hello, I appreciate your interest, I will write in Spanish and English to not to break the forum's rules.
I have to clarify that I did try to backup the ROM twice but errors appeared and didn't continue with the process, that's why I don't have the original ROM.
I am very interested in your backup, if you could share a link to download it it would be very good, my phone is also a single SIM and at this point I risk trying anything to recover the equipment.
Thank you again for your help.
Hola, aprecio tu interés, voy a escribir en español e ingles para no romper las reglas del foro.
Tengo que aclarar que sí intenté hacer el respaldo de la ROM dos veces pero aparecían errores y no continuaba con el proceso, es por eso que no tengo la ROM original.
Me interesa mucho tu respaldo, si pudieras compartir algún enlace para poder descargarlo sería muy bueno, mi teléfono también es de un solo SIM y a estas alturas me arriesgo a probar lo que sea para recuperar el equipo.
Gracias de nuevo por tú interés.
Click to expand...
Click to collapse
si lo subiere a mega amigo sino que mi internet es lento para mañana debería estar dejando el link
el_nabo said:
Dear Lyoks
Unfortunately for me my knowledge is not enough for that, that's why I ask for your help, there are two things that I can think of, get the original ZTE recovery for the A6 or get the original ROM but in zip format and flash it with the TWRP , this would have to be using some backup that was created using the TWRP, will I explain?
Do you have any backup you could send me? I would greatly appreciate it.
Thank you.
el_nabo
Click to expand...
Click to collapse
Hello, right here is service firmware https://4pda.ru/forum/index.php?s=&showtopic=846041&view=findpost&p=77561009
With it, you can bring your phone back to life, ALWAYS!
el_nabo said:
Hello, I appreciate your interest, I will write in Spanish and English to not to break the forum's rules.
I have to clarify that I did try to backup the ROM twice but errors appeared and didn't continue with the process, that's why I don't have the original ROM.
I am very interested in your backup, if you could share a link to download it it would be very good, my phone is also a single SIM and at this point I risk trying anything to recover the equipment.
Thank you again for your help.
Hola, aprecio tu interés, voy a escribir en español e ingles para no romper las reglas del foro.
Tengo que aclarar que sí intenté hacer el respaldo de la ROM dos veces pero aparecían errores y no continuaba con el proceso, es por eso que no tengo la ROM original.
Me interesa mucho tu respaldo, si pudieras compartir algún enlace para poder descargarlo sería muy bueno, mi teléfono también es de un solo SIM y a estas alturas me arriesgo a probar lo que sea para recuperar el equipo.
Gracias de nuevo por tú interés.
Click to expand...
Click to collapse
aqui tienes la rom stock solo descomprimes copias a la sd y restauras por twpr
link: https://mega.nz/#!FUYxmabY!HNIPfs2zH0FosZRoM86-htE0Ok488vsf7d2-wlgupI4
andresh-5 said:
aqui tienes la rom stock solo descomprimes copias a la sd y restauras por twpr
link: https://mega.nz/#!FUYxmabY!HNIPfs2zH0FosZRoM86-htE0Ok488vsf7d2-wlgupI4
Click to expand...
Click to collapse
Hello, thank you very much for your time and for the download link. After decompressing the .rar file you sent I had to rename the folder BACKUPS / 3203872 ..... (this is the serial number of your phone) by BACKUPS / 320676307 .... which is mine to be recognized by my cell phone and I could do the restore, all good until that moment, I restarted the phone and started with the CLARO logo, I thought that the problem was already solved but it was not so, now a legend appears that says "incorrect encryption" and that's it Do you know how to repair this? I did what Lyoks said in the final part of the first post he did but it didn't work.
Hola, muchas gracias por tu tiempo y por el enlace de la descarga. Después de descomprimir el archivo .rar que enviaste tuve que renombrar la carpeta BACKUPS/3203872..... (este es el numero de serie de tú teléfono) por BACKUPS/320676307.... que es el mío para que lo reconociera mi celular y pude hacer el restore, todo bien hasta ese momento, reinicié el teléfono y arrancó con el logo de CLARO, pensé que ya estaba resuelto el problema pero no fue así, ahora aparece una leyenda que dice "encriptación incorrecta" y eso es todo ¿sabes como reparar esto? hice lo que dijo Lyoks en la parte final del primer post que hizo pero no funcionó.
---------- Post added at 12:15 AM ---------- Previous post was at 12:01 AM ----------
lyoks said:
Hello, right here is service firmware https://4pda.ru/forum/index.php?s=&showtopic=846041&view=findpost&p=77561009
With it, you can bring your phone back to life, ALWAYS!
Click to expand...
Click to collapse
Hello, thank you very much for your time and for the link, I had to open a Yandex account, it was a bit difficult by the way since I had to use the Google translator, I don't understand any Russian! anyway.
I did what the post says but at the time of flashing it only took about two seconds and the green label SUCCESS appeared, I expected the flash to take longer so I think something is not right, I restarted the phone and nothing happened, it was as if I wouldn't have flashed anything. Do you know what I can do?
XYAUTO-Firmware-Workbench
Scripts intended to mount the XY-AUTO Firmware, make modifications and reassemble the firmware They can retrieve the firmware from specified location and after modification, they can put the firmware into another specified location
Files:
1-) config.ini = A file to setup parameters, paths for the original firmware and patched firmware, temp directory to work with firmware files and mount point to edit the firmware
2-) import_original.sh = Retrieves the Original firmware ZIP file from the location specified in config.ini
3-) import_patched.sh = Retrieves the ZIP firmware already patched from the location specified in the config.ini (normally a firmware that you've already patched before)
4-) unpack.sh = (Runs automatically after import_original.sh or import_patched.sh) Unpack the imported firmware and create the mount moints (as specified in the config.ini file) to work with the firmware
5-) repack.sh = Unmount the modified firmware from the mount points, delete the mount points, Build the firmware, ZIP and sign the ZIP final file and send it to the patched directory as specified in config.ini
6-) tweaker.sh = Asks for many mods, locale, language, device name, brand, model and let you customize your firmware
7-) inject_mods.sh = This will copy all the contents of the '_mods' folder inside firmware. I.E. I put a 'gps_debug.cfg or gps.conf' inside 'system/etc/' and it will be injected into firmware overwritting the existent
inject_su.sh = This will inject 'su binary' into firmware as a daemon, this is dangerous as the firmware is permanently rooted and the apps don't ask for permissions (they already have the root access) USE AT YOUR OWN RISK
9-) clean_local.sh = This script will unmount the firmware and delete it, it will also delete temporary files. as its name says, it cleans the dir !
N'joy it !
mariodantas said:
XYAUTO-Firmware-Workbench
Scripts intended to mount the XY-AUTO Firmware, make modifications and reassemble the firmware They can retrieve the firmware from specified location and after modification, they can put the firmware into another specified location
Files:
1-) config.ini = A file to setup parameters, paths for the original firmware and patched firmware, temp directory to work with firmware files and mount point to edit the firmware
2-) import_original.sh = Retrieves the Original firmware ZIP file from the location specified in config.ini
3-) import_patched.sh = Retrieves the ZIP firmware already patched from the location specified in the config.ini (normally a firmware that you've already patched before)
4-) unpack.sh = (Runs automatically after import_original.sh or import_patched.sh) Unpack the imported firmware and create the mount moints (as specified in the config.ini file) to work with the firmware
5-) repack.sh = Unmount the modified firmware from the mount points, delete the mount points, Build the firmware, ZIP and sign the ZIP final file and send it to the patched directory as specified in config.ini
6-) tweaker.sh = Asks for many mods, locale, language, device name, brand, model and let you customize your firmware
7-) inject_mods.sh = This will copy all the contents of the '_mods' folder inside firmware. I.E. I put a 'gps_debug.cfg or gps.conf' inside 'system/etc/' and it will be injected into firmware overwritting the existent
inject_su.sh = This will inject 'su binary' into firmware as a daemon, this is dangerous as the firmware is permanently rooted and the apps don't ask for permissions (they already have the root access) USE AT YOUR OWN RISK
9-) clean_local.sh = This script will unmount the firmware and delete it, it will also delete temporary files. as its name says, it cleans the dir !
N'joy it !
Click to expand...
Click to collapse
I want to modify an update file to put it in Mexican Spanish, with the gtm-5 time zone and with my own logo, install some applications in the system, how can I do it?
Darkhack3r77 said:
I want to modify an update file to put it in Mexican Spanish, with the gtm-5 time zone and with my own logo, install some applications in the system, how can I do it?
Click to expand...
Click to collapse
1-) config.ini = A file to setup parameters, paths for the original firmware and patched firmware, temp directory to work with firmware files and mount point to edit the firmware
And so on...
This tool is for linux only, if you have your already translated app to Mexican Spanish and want to put the firmware in GMT-5 by default, also replace bootanimation and more stuff, you must read carefully the thread you quoted to me
O me puedes escribir en españok, porque yo entiendo bien y escribo bien
mariodantas said:
1-) config.ini = A file to setup parameters, paths for the original firmware and patched firmware, temp directory to work with firmware files and mount point to edit the firmware
And so on...
This tool is for linux only, if you have your already translated app to Mexican Spanish and want to put the firmware in GMT-5 by default, also replace bootanimation and more stuff, you must read carefully the thread you quoted to me
O me puedes escribir en españok, porque yo entiendo bien y escribo bien
Click to expand...
Click to collapse
PERFECTO EN ESPAÑOL ENTONCES
el tema es que el software si viene multilenguaje como sabes en las placas xyauto pero a la hora de instalar alguna actualizacion, de alguna manera estas borran los ajustes de idioma y region de zona horaria, quiero modificar un .cfg para que se vuelva a poner en español, hasta ahora ya tengo varios .cfg que segun los parámetros que permiten las ROMS cambian algunos parametros del sistema, pero no se como hacer la sintaxis para que dicho archivo .cfg funcione y setear los parametros. te envio la muestra del que funcoiona y cambia algunos parametros del sistema, al fondo el que hice funcionar, enfrente todos los parametros que eh logrado encontrar dentro de los updates que el propio xyauto tiene en su pagina, tambien hay un archvio que genera la placa base de tipo metazone.bin el cual si se flashea desde la pc si cambia el idioma y todo a como lo congifuras pero el roblema es conectar 100 placas de 1 en 1 para actualizar la informacion, seria mas facil hacerlo manualmente, por eso busco la forma de que se haga con el archivo .cfg que al conectar la usb con este archivo en la raiz en automatico hace todos los cambios.
Mod Edit: English Translation Below
PERFECT IN SPANISH THEN
the issue is that the software does come multilanguage as you know in the xyauto boards but when installing an update, somehow these delete the language and time zone region settings, I want to modify a .cfg so that it is put back In Spanish, until now I already have several .cfg files that, according to the parameters that the ROMS allow, change some system parameters, but I don't know how to make the syntax so that said .cfg file works and set the parameters. I send you the sample of the one that works and changes some parameters of the system, in the background the one that I made work, in front of all the parameters that I have managed to find within the updates that xyauto itself has on its page, there is also a file that generates the plate base of type metazone.bin which if it is flashed from the pc if it changes the language and everything to how you configure it but the problem is to connect 100 plates 1 in 1 to update the information, it would be easier to do it manually, that's why I look for the way to do it with the .cfg file that when connecting the usb with this file in the root automatically makes all the changes.
Eso de conectar la usb con el archivo y que se hagan los cambios auytomaticos me parece muy dificil de realizar, lo que si puedes hacer es con el XYAUTO-Firmware-Workbench, editar el firmware y reemplazar el archivo original por el tuyo y quando lo vayas a flashear, ya lleva el archivo configurado, porqué 100 placas, tienes una tienda en alguna parte del mundo ?
mariodantas said:
Eso de conectar la usb con el archivo y que se hagan los cambios auytomaticos me parece muy dificil de realizar, lo que si puedes hacer es con el XYAUTO-Firmware-Workbench, editar el firmware y reemplazar el archivo original por el tuyo y quando lo vayas a flashear, ya lleva el archivo configurado, porqué 100 placas, tienes una tienda en alguna parte del mundo ?
Click to expand...
Click to collapse
si asi es tengo mi propia tienda, con modelos con placas base y características exclusivas de mi marca y mi propio software que eh ido adaptando pero debido a como trabajo con xyauto solo me fabrican las placas y yo tengo que ver el resto, me han ayudado con estos archivos de actualización para cambiar parámetros tanto de software xy como del sistema, el unico problema que tengo ahora es ponerlos en español de México y con la zona horaria del pais, desarrollar las 5 roms de los 5 modelos que manejo no me es posible ya que eh intentado desempaquetar las roms y reempaquetarlas y no lo eh logrado hacer ya que no tengo experiencia en esta area.
English translation:
Yes, that's right, I have my own store, with models with base plates and exclusive features of my brand and my own software that I have been adapting, but because I work with xyauto they only make the plates for me and I have to see the rest, they have helped me With these update files to change parameters of both software xy and the system, the only problem I have now is to put them in Mexican Spanish and with the country's time zone, developing the 5 roms of the 5 models that I manage is not possible for me since I have tried to unpack the roms and repackage them and I have not been able to do it since I have no experience in this area.
Darkhack3r77 said:
eh intentado desempaquetar las roms y reempaquetarlas y no lo eh logrado
Click to expand...
Click to collapse
Mandame un rom de los tuyos y yo te lo localizo en español de mexico y te la envio para probar
English:
Send me one of your roms, I'll set locale to es_MX, the send you back to allow you to test
hola
la pantalla de mi radio android se giro en horizontal y no funciona el touch la plataforma es ac 8227l
I keep trying to do adb devices or fastboot devices to get this Cricket Dream 5g to show up and i cannot figure it out to save my life.
Is there a specific Driver that i need to install for the computer to see the Dream 5G when it's in fastboot mode?
Aeikozz said:
I keep trying to do adb devices or fastboot devices to get this Cricket Dream 5g to show up and i cannot figure it out to save my life.
Is there a specific Driver that i need to install for the computer to see the Dream 5G when it's in fastboot mode?
Click to expand...
Click to collapse
From wiki.lineageos.org:
Download the Windows zip from Google.
Extract it somewhere - for example, %USERPROFILE%\adb-fastboot
On Windows 7/8:
From the desktop, right-click My Computer and select Properties
In the System Properties window, click on the Advanced tab
In the Advanced section, click the Environment Variables button
In the Environment Variables window, highlight the Path variable in the Systems Variable section and click the Edit button
Append ;%USERPROFILE%\adb-fastboot\platform-tools to the end of the existing Path definition (the semi-colon separates each path entry)
On Windows 10:
Open the Start menu, and type “advanced system settings”
Select “View advanced system settings”
Click on the Advanced tab
Open the “Environment Variables” window
Select the Path variable under “System Variables” and click the “Edit” button
Click the “New” button
Insert %USERPROFILE%\adb-fastboot\platform-tools in the text field
Download the USB drivers and follow the instructions there.
ethical_haquer said:
De wiki.lineageos.org :
Descarga el zip de Windows de Google.
Extráigalo en algún lugar, por ejemplo, %USERPROFILE%\adb-fastboot
En Windows 7/8:
Desde el escritorio, haga clic derecho en Mi PC y seleccione Propiedades
En la ventana Propiedades del sistema, haga clic en la pestaña Avanzado
En la sección Avanzado, haga clic en el botón Variables de entorno
En la ventana Variables de entorno, resalte la variable Ruta en la sección Variable de sistemas y haga clic en el botón Editar
Agregue %USERPROFILE%\adb-fastboot\platform-tools al final de la definición de ruta existente (el punto y coma separa cada entrada de ruta)
En Windows 10:
Abra el menú Inicio y escriba "configuración avanzada del sistema"
Seleccione "Ver configuración avanzada del sistema"
Haga clic en la pestaña Avanzado
Abra la ventana "Variables de entorno"
Seleccione la variable Ruta en "Variables del sistema" y haga clic en el botón "Editar"
Haga clic en el botón "Nuevo"
Inserte %USERPROFILE%\adb-fastboot\platform-tools en el campo de texto
Descargue los controladores USB y siga las instrucciones allí.
Click to expand...
Click to collapse
hola soy nuevo en esto alguien me podría ayudar con el procedimiento para cargar la ROM a este dispositivo . gracias
Quintana9710 said:
hola soy nuevo en esto alguien me podría ayudar con el procedimiento para cargar la ROM a este dispositivo . gracias
Click to expand...
Click to collapse
Please translate your post, feel free to keep the original version along with the translated one.
ethical_haquer said:
Traduzca su publicación, siéntase libre de conservar la versión original junto con la traducida.
Click to expand...
Click to collapse
ethical_haquer said:
Please translate your post, feel free to keep the original version along with the translated one.
Click to expand...
Click to collapse
Hello, I am new in this, someone could help me with the procedure to load the ROM to this device. EC211001 model. thank you
Quintana9710 said:
Hello, I am new in this, someone could help me with the procedure to load the ROM to this device. EC211001 model. thank you
Click to expand...
Click to collapse
Which ROM?
I already have the factory rom. I don't know the steps to install it on the device. I want to install the rom because the phone turns me on and stays on a sign that says it's corrupted
Quintana9710 said:
I already have the factory rom. I don't know the steps to install it on the device. I want to install the rom because the phone turns me on and stays on a sign that says it's corrupted
Click to expand...
Click to collapse
Alright, I'll have to help you tomorrow. Sorry.
Ok my friend
Hi
Quintana9710 said:
Hi
Click to expand...
Click to collapse
Alright, so what is your situation right now? It sounds like you have the stock ROM installed, and it's corrupted, but what phone is it?
ethical_haquer said:
Muy bien, entonces, ¿cuál es tu situación en este momento? Parece que tiene instalada la ROM estándar y está dañada, pero ¿qué teléfono es?
Click to expand...
Click to collapse
Cricket dream 5g ec211001
I have the rom. I don't know how to install it on the device. and installed several phones before but this rom does not have the file (scater)
what I need are the steps to be able to install the ROM
Quintana9710 said:
what I need are the steps to be able to install the ROM
Click to expand...
Click to collapse
I've only used Samsung devices, so I'm honestly not sure if I will be able to help you. I would recommend starting your own thread on this forum so more people will see it. Chances are somebody here knows how to flash your device. Right now your question is buried on a thread called "
Is there a specific Driver I should be using so that my phone is seen on my windows pc?"
Your question isn't really related to it. Sorry that I couldn't help.