Database Users

[Q] from sweet rom to stock lollipop

Hi everyone! how are you?
Im glad to hear that we can upgrate our note 4 to lollipop (for H version).
Im really worried about do something wrong to get lollipop. Actualy, i have the V6 sweet custom rom for the C variant (whereas i have the H version).
What i have to do to get lollipop? One friend told me that the only thing i just do its make full wipes, and install the stock rom in odin.
thats all?
Please, help me... I really want to get lollipop and i dont want to brick my phone!.
thanks!

aguu352 said:
Hi everyone! how are you?
Im glad to hear that we can upgrate our note 4 to lollipop (for H version).
Im really worried about do something wrong to get lollipop. Actualy, i have the V6 sweet custom rom for the C variant (whereas i have the H version).
What i have to do to get lollipop? One friend told me that the only thing i just do its make full wipes, and install the stock rom in odin.
thats all?
Please, help me... I really want to get lollipop and i dont want to brick my phone!.
thanks!
Click to expand...
Click to collapse
There's no way to hardbrick your device by just flashing a rom with odin. I even could say that you can flash the N910H rom via odin without any kind of wipes over SweetRom which is almost the same build and the device would boot normally (some bugs might be appear here and there).
If you want to clean flash the new N910H firmware, head into CWM/TWRP and wipe data, cache and system, then put it in download mode and flash the firmware via odin.
Don't worry, just wipe everything I said earlier and flash it via odin. Should work fine without bugs.
Abrazo!

galaxynote2 said:
There's no way to hardbrick your device by just flashing a rom with odin. I even could say that you can flash the N910H rom via odin without any kind of wipes over SweetRom which is almost the same build and the device would boot normally (some bugs might be appear here and there).
If you want to clean flash the new N910H firmware, head into CWM/TWRP and wipe data, cache and system, then put it in download mode and flash the firmware via odin.
Don't worry, just wipe everything I said earlier and flash it via odin. Should work fine without bugs.
Abrazo!
Click to expand...
Click to collapse
thanks bro!!! i was scared of that, because... DK, its a very expensive phone haha... the sweet rom its KK (4.4.4)
OK, so, recovery / full wipes/ downloading / flash lollipop.
thats all?
thanks, thanks!!!

aguu352 said:
thanks bro!!! i was scared of that, because... DK, its a very expensive phone haha... the sweet rom its KK (4.4.4)
OK, so, recovery / full wipes/ downloading / flash lollipop.
thats all?
thanks, thanks!!!
Click to expand...
Click to collapse
Well I thought you were using SweetRom 5.0.1 (N910C version), but if it's kiktat then you will need to do full wipes first obligatory, then flash LP. Enjoy!

galaxynote2 said:
Well I thought you were using SweetRom 5.0.1 (N910C version), but if it's kiktat then you will need to do full wipes first obligatory, then flash LP. Enjoy!
Click to expand...
Click to collapse
that´s why im very scared....
Porque no hablamos en español ya que los dos somos Argentinos? jaja.
no tengo que cambiar el bootloader o los modems al pasar de custom kk a stock lollipop??

aguu352 said:
that´s why im very scared....
Porque no hablamos en español ya que los dos somos Argentinos? jaja.
no tengo que cambiar el bootloader o los modems al pasar de custom kk a stock lollipop??
Click to expand...
Click to collapse
No porque te borran el comentario si no esta en inglés o no ponés la traducción abajo. No debería ser necesario cambiar el bootloader o los modems ya que vienen de por sí integrados en el archivo que bajaste para meterlo por odin. Si bajaste la rom oficial (stock) que se flashea por odin (normalmente .tar o tar.md5), tan sólo tenes que hacer todos los wipes necesarios y instalarla por odin. Yo lo hice con mi viejo N7000 cuando pasé de ICS a Jelly Bean, y lo volví a hacer con mi N910C cuando pase de Kitkat a Lollipop, es así en todos los telefonos Galaxy, si pasas de una custom rom a una stock con android superior el único paso intermedio es hacer los wipes necesarios. No te hagas drama, no se va a cag*r y si pasa algo siempre podes volver a la version anterior.
Es un teléfono caro (y más si adquiriste la versión LTE como yo) pero creeme que no vas a tener drama.
Si queres quedarte mas tranquilo de que todo va a salir bien comprobá que tengas batería suficiente y la rom se haya bajado correctamente.
Translation: We can't speak in other language rather than english if we don't put a translation below. It shouldn't be necessary to change the bootloader or modems because they're integrated with the md5 package you downloaded. If you downloaded a tar.md5 package for odin, you only need to do the necessary wipes and flash Lollipop via odin. I did the same with my old N7000 and my N910C, it's the same in every Galaxy device out there. If you need to upgrade from a custom rom to a stock rom with a newer android version the only intermediate step is wipe everything. Dont worry, you will not mess up anything. If you do, remember that you can go to the older version to revert the changes.
Suerte!/Good Luck!

galaxynote2 said:
No porque te borran el comentario si no esta en inglés o no ponés la traducción abajo. No debería ser necesario cambiar el bootloader o los modems ya que vienen de por sí integrados en el archivo que bajaste para meterlo por odin. Si bajaste la rom oficial (stock) que se flashea por odin (normalmente .tar o tar.md5), tan sólo tenes que hacer todos los wipes necesarios y instalarla por odin. Yo lo hice con mi viejo N7000 cuando pasé de ICS a Jelly Bean, y lo volví a hacer con mi N910C cuando pase de Kitkat a Lollipop, es así en todos los telefonos Galaxy, si pasas de una custom rom a una stock con android superior el único paso intermedio es hacer los wipes necesarios. No te hagas drama, no se va a cag*r y si pasa algo siempre podes volver a la version anterior.
Es un teléfono caro (y más si adquiriste la versión LTE como yo) pero creeme que no vas a tener drama.
Si queres quedarte mas tranquilo de que todo va a salir bien comprobá que tengas batería suficiente y la rom se haya bajado correctamente.
Translation: We can't speak in other language rather than english if we don't put a translation below. It shouldn't be necessary to change the bootloader or modems because they're integrated with the md5 package you downloaded. If you downloaded a tar.md5 package for odin, you only need to do the necessary wipes and flash Lollipop via odin. I did the same with my old N7000 and my N910C, it's the same in every Galaxy device out there. If you need to upgrade from a custom rom to a stock rom with a newer android version the only intermediate step is wipe everything. Dont worry, you will not mess up anything. If you do, remember that you can go to the older version to revert the changes.
Suerte!/Good Luck!
Click to expand...
Click to collapse
aaah, i didnt know that! (about the language).
But, i dont have the LTE version... only the rom. I have the H version...
It´s the same? I´ll do that!
thanks bro for all...really

aguu352 said:
aaah, i didnt know that! (about the language).
But, i dont have the LTE version... only the rom. I have the H version...
It´s the same? I´ll do that!
thanks bro for all...really
Click to expand...
Click to collapse
It' s the same in every Galaxy device, even in your N910H! Don't worry you will not mess anything, just do it and your phone will boot up with Lollipop after 10 minutes aprox.
You're welcome!

galaxynote2 said:
It' s the same in every Galaxy device, even in your N910H! Don't worry you will not mess anything, just do it and your phone will boot up with Lollipop after 10 minutes aprox.
You're welcome!
Click to expand...
Click to collapse
my friend! i f***d up!!!
when it was near to finish the odin process. told me "FAIL!"
now i cant start the phone!!!!!
what can i do!! ????

aguu352 said:
my friend! i f***d up!!!
when it was near to finish the odin process. told me "FAIL!"
now i cant start the phone!!!!!
what can i do!! ????
Click to expand...
Click to collapse
Seems like a problem with odin, not the device. Answering you to PM so we can talk easier.

Security Error on LG G2 d802 No Download, No Fastboot, No Recovery and Not Recognized

Hi Friends, my LG G2 is in the screen LG logo and after this the message security error and power down.
Before this my phone its recognized by the pc (only fastboot mode) and with the Verry Partitions error, i recovered this with SRKTool so.. now this into the Security Error and my PC not recognize the device (i tried on 3 pcs and 9 diferent ports)
I need help please!!! I dont have money for another phone, and this is my life, please, any help is received. Iam from Venezuela, and sorry for th bad english.

MoixyS2 said:
Hi Friends, my LG G2 is in the screen LG logo and after this the message security error and power down.
Before this my phone its recognized by the pc (only fastboot mode) and with the Verry Partitions error, i recovered this with SRKTool so.. now this into the Security Error and my PC not recognize the device (i tried on 3 pcs and 9 diferent ports)
I need help please!!! I dont have money for another phone, and this is my life, please, any help is received. Iam from Venezuela, and sorry for th bad english.
Click to expand...
Click to collapse
Here's a guide: https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805

Jan Philipp said:
Here's a guide: https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Click to expand...
Click to collapse
this works only on linux... sure? My windows pcs not recognize my device...
.

MoixyS2 said:
this works only on linux... sure? My windows pcs not recognize my device...
.
Click to expand...
Click to collapse
Right. You need a running Linux. So you can download a Linux-Live-CD and run it from CD/DVD-drive without installation or you can set up a Linux with VirtualBox which is done in a couple of minutes.
Sadly I have no knowledge about windows solutions. Sorry.

hola ! según lo que me pasó hace muy poco, yo hice prácticamente lo mismo que vos (osea arreglarlo con un archivo bat, o no ?)... lo que funcionó en mí caso fue bajar un archivo TOT y el correspondiente dll y flashear vía Flash tools 1.6, es decir, no el "normal" que le pones el kdz y listo porque ese no me lo tomaba de ninguna forma... espero que te sirva ! tengo tutoriales pero creo que son todos enlaces externos a otros foros y no sé si se considerará spam o no... buena suerte
Hello ! According to what happened to me very recently, I did pretty much the same as you (I fix it with a bat file, or not?) ... what worked for me was to download a TOT file and the corresponding dll and flash via Flash Tools 1.6, that is, not the "normal" you put the kdz and ready because that did not take me in any way ... I hope it serves you! I have tutorials but I think they are all external links to other forums and I do not know if it will be considered spam or not ... good luck

superking123 said:
hola ! según lo que me pasó hace muy poco, yo hice prácticamente lo mismo que vos (osea arreglarlo con un archivo bat, o no ?)... lo que funcionó en mí caso fue bajar un archivo TOT y el correspondiente dll y flashear vía Flash tools 1.6, es decir, no el "normal" que le pones el kdz y listo porque ese no me lo tomaba de ninguna forma... espero que te sirva ! tengo tutoriales pero creo que son todos enlaces externos a otros foros y no sé si se considerará spam o no... buena suerte
Hello ! According to what happened to me very recently, I did pretty much the same as you (I fix it with a bat file, or not?) ... what worked for me was to download a TOT file and the corresponding dll and flash via Flash Tools 1.6, that is, not the "normal" you put the kdz and ready because that did not take me in any way ... I hope it serves you! I have tutorials but I think they are all external links to other forums and I do not know if it will be considered spam or not ... good luck
Click to expand...
Click to collapse
With Security Error??? And not recognized on my Windows PC
con el logo de Security Error?? Y no es reconocido en mi computadora con Windows

Jan Philipp said:
Right. You need a running Linux. So you can download a Linux-Live-CD and run it from CD/DVD-drive without installation or you can set up a Linux with VirtualBox which is done in a couple of minutes.
Sadly I have no knowledge about windows solutions. Sorry.
Click to expand...
Click to collapse
not working
the sdb partitions not visible on the linux terminal

MoixyS2 said:
With Security Error??? And not recognized on my Windows PC
con el logo de Security Error?? Y no es reconocido en mi computadora con Windows
Click to expand...
Click to collapse
Si, despues de arreglar el error de múltiples particiones pude volver a entrar al modo download (mantener volumen arriba y poner el usb, aunque creo que ya lo sabes)... Sino pareciera que la única forma que te queda es volver a forzar ese modo de corrupción haciendo puente, pero es un lio, e igualmente necesitarías lo de Linux creo :/
If, after fixing the error of multiple partitions I was able to re-enter the download mode (keep volume up and put the usb, although I think you already know) ... But it seems that the only way you have is to re-enforce that Corruption mode making bridge, but it's a mess, and you'd also need the Linux thing I think: /

superking123 said:
Si, despues de arreglar el error de múltiples particiones pude volver a entrar al modo download (mantener volumen arriba y poner el usb, aunque creo que ya lo sabes)... Sino pareciera que la única forma que te queda es volver a forzar ese modo de corrupción haciendo puente, pero es un lio, e igualmente necesitar
Click to expand...
Click to collapse

No arranca ninguna Rom en X727

Buenas noches, lo primero es disculparme por no hacer la pregunta en el idioma natural de la web. Dicho esto, vengo a exponer mi caso con el leeco x727, y es el siguiente: El teléfono un día se me apago y no funcionaba nada, he realizado la instalación qfil, recovery y rom, he instalado 9 o 10 rom, así como diferentes recovery para este modelo y muchas de ellas las instalo correctamente, pero una vez que reinicio el sistema, siempre se queda en la pantalla principal en la que pone LeEco Share the Eco World, no terminando nunca de arrancar la rom.
Llevo un mes prácticamente leyendo foros e intentandolo revivir pero me es imposible, por si me pudieran ayudar. gracias

S_I_f2001 said:
Buenas noches, lo primero es disculparme por no hacer la pregunta en el idioma natural de la web. Dicho esto, vengo a exponer mi caso con el leeco x727, y es el siguiente: El teléfono un día se me apago y no funcionaba nada, he realizado la instalación qfil, recovery y rom, he instalado 9 o 10 rom, así como diferentes recovery para este modelo y muchas de ellas las instalo correctamente, pero una vez que reinicio el sistema, siempre se queda en la pantalla principal en la que pone LeEco Share the Eco World, no terminando nunca de arrancar la rom.
Llevo un mes prácticamente leyendo foros e intentandolo revivir pero me es imposible, por si me pudieran ayudar. gracias
Click to expand...
Click to collapse
You must speak English here or no one will answer you.
Use Google translate like I just did.
Here is your answer: https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121

tsongming said:
You must speak English here or no one will answer you.
Use Google translate like I just did.
Here is your answer: https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121
Click to expand...
Click to collapse
Good afternoon, I have reviewed what you have told me and reinstalled everything.
I still have the same problem, I install everything very well without any problems but then the Rom does not start. Could it be that the hardware is broken ??? because it can not be that the same thing has happened to anyone else than me, that after installing up to 9 different ROMs, none will work, leaving the entire installation process correct.

S_I_f2001 said:
Good afternoon, I have reviewed what you have told me and reinstalled everything.
I still have the same problem, I install everything very well without any problems but then the Rom does not start. Could it be that the hardware is broken ??? because it can not be that the same thing has happened to anyone else than me, that after installing up to 9 different ROMs, none will work, leaving the entire installation process correct.
Click to expand...
Click to collapse
So you completely all steps with error. But the phone will not start? Take another look at the steps ( that is expected) It takes a while to start. Can you now see the phone storage from your PC?
Is it possible to send files to the phone via fastboot?
If so, you may be able to flash a recovery, and root your phone using aDB bridge or restore stock EUI.
Keep in Mind that Un-bricking your phone will be frustrating and will require alot of trial and error.
I have been there and since I had some extra time I decided spent a little more than an hour writing you a whole new guide with working links. Just remember that you can definitely unbrick your phone.
Directly from Leeco Website : When it was still accessible
Music pro3 save bricks line brush
1. Download the QPST tool & driver.
2. Make sure your device has the Power to support flashing.
3. Run Flash and QFIL
Downloads : ( These downloads take a few minutes but works and comes directly from Leeco)
FlashOne1.9 : https://pan.baidu.com/s/1nvttJtf
9008 Driver: https://pan.baidu.com/s/1nvdKHeT Download and install Qualcomm driver. While installing driver avoid using cable for successful installation.
QPST.2.7.460.zip https://easy-firmware.com/home/browse/file/id/102719/QPST.2.7.460.zip/
Flash File: zl1_qfil (1).zip
After installation, connect Phone to PC using USB cable.
* While connecting to PC, phone should be switched off and press volume up & down as boot key.
* If it makes Qualcomm port, then driver has been successfully installed.
If the right Qualcomm driver is installed on your computer
You should see the phone as a Qualcomm HS-USB QLoader 9008 or incorrectly listed as Qualcomm HS-USB Diagnostics 900E both within settings and device manager. )IF your device is showing Qualcomm HS-USB diagnostics 900E(COM4) , then you are not in the correct Qualcomm mode.
When device shows Qualcomm HS USB 9008 then use flash 2.0 to flash your ROM
Fastboot: Press and hold the power button and the volume down (minus) to enter fastboot mode.
Recovery: Press and hold the power button and the volume up (plus) to enter Recovery mode.
QFIL upgrade mode: Press and hold the power key and the volume up and down key ( at same time!) to enter “Qualcomm FIL “Mode!* Again: Qualcomm mode, You need to press all 3 buttons V+,V-, + power buttons simultaneously after connecting to usb!
* Run the Minimal ADB and Fastboot From the Start Menu
* Use the following command to check if your Device is Detected in ADB:
PHP:
adb devices -l
For additional things to try see : https://developer.android.com/studio/command-line/adb.html
* In Flash 2.0 select your file then click Refresh you should see the port COM + and then select File Select QFIL upgrade package, the package release address
Review installation steps here before starting : https://forum.xda-developers.com/le-pro3/how-to/guide-unbrick-le-pro3-tested-t3622340
Note all of the links are dead. But the images are relevant and you have the files from the links above.
I am not fully clear on exactly where your are having the issue. Send me the log files from flash 2.0
You do not need to use 9 different roms. Just uses the files included with the link. These steps WILL NOT work on any other phone other than the X720 and X727. If you have something besides a X727*or X720 then theses steps are not going to help you.
Make sure that you installed the Qualcomm 9008 drivers on your PC
ADB has to be authorized on Windows 10 for this to work, You can update ADB and Android drivers on your computer by using
Apparently, this http://en.miui.com/thread-266598-1-1.html
It is completely possible that you have a hardware issue. Such as a damaged USB card, usually caused by a faulty usb cable ( the usb cable that come with the phone have been known to have quality issues.) If you purchased the phone recently, I would suggest that you contact the vendor that you purchased the phone from and request a warranty exchange.

Excuse me I had to explain badly. I have no problems installing any of the files.
The problem is when after everything is installed, the Rom does not start.
But I repeat everything is installed well.

Sent from my LEX727 using xda premium
I will take it you are using twrp.
You did swipe allow modifications in twrp?
You are clean installs?

mchlbenner said:
Sent from my LEX727 using xda premium
I will take it you are using twrp.
You did swipe allow modifications in twrp?
You are clean installs?
Click to expand...
Click to collapse
I have used both Twrp, the tool all in One and Minimal ADB and Fastboot.
Also use a rom of groosophor that is an executable where you come all inclusive.

S_I_f2001 said:
I have used both Twrp, the tool all in One and Minimal ADB and Fastboot.
Also use a rom of groosophor that is an executable where you come all inclusive.
Click to expand...
Click to collapse
Okay, can you boot into Recovery? In recovery you need to wipe everything, install your firmware, and install Magisk, reboot to recovery. Check your storage, follow the instructions to resolve the storage issue if an issue exists.
Next, go to the Lineage 15.1 page and download all of the files recommended, Flash Lineage 15.1 , mind the Gapps, and Magisk, Also install the correct bootloader for your device.
While we have alot of great Roms. Lineage 15.1 is probably the most stable of all Oreo Roms. I recommend that you either install Lineage or stock EUI until this issue is resolved. If you can boot to recovery, the rest should be easy.
---------- Post added at 02:20 AM ---------- Previous post was at 02:19 AM ----------
S_I_f2001 said:
Excuse me I had to explain badly. I have no problems installing any of the files.
The problem is when after everything is installed, the Rom does not start.
But I repeat everything is installed well.
Click to expand...
Click to collapse
Also, if you are responding to me. Click Reply under my comment or I will not get the notification.

S_I_f2001 said:
Buenas noches, lo primero es disculparme por no hacer la pregunta en el idioma natural de la web. Dicho esto, vengo a exponer mi caso con el leeco x727, y es el siguiente: El teléfono un día se me apago y no funcionaba nada, he realizado la instalación qfil, recovery y rom, he instalado 9 o 10 rom, así como diferentes recovery para este modelo y muchas de ellas las instalo correctamente, pero una vez que reinicio el sistema, siempre se queda en la pantalla principal en la que pone LeEco Share the Eco World, no terminando nunca de arrancar la rom.
Llevo un mes prácticamente leyendo foros e intentandolo revivir pero me es imposible, por si me pudieran ayudar. gracias
Click to expand...
Click to collapse
¿De dónde eres? Soy de México, Mándame un mensaje privado y te puedo ayudar, hablo inglés, francés y español, podemos platicar en cualquiera de los 3 para que no batalles con traducciones o problemas de lenguaje.

tsongming thank you. great guide I needed that windows driver for adb and couldn't find it so you helped 2 for the price of one:good:

help install a rom and lost my imei

I installed a rom and I lost my imei, and I do not have the backup of the efs, I already installed the stock rom and I could not recover it ... help please

MissaPM said:
I installed a rom and I lost my imei, and I do not have the backup of the efs, I already installed the stock rom and I could not recover it ... help please
Click to expand...
Click to collapse
Hello, just to have it clear, you flashed the lastest stock? If you fash a previous stock you will never get back your IMEI. If you did flash the last stock try using the lenovo moto assistant tool, go to flash and the to rescue. Mybe that will save you

juampapo546 said:
Hello, just to have it clear, you flashed the lastest stock? If you fash a previous stock you will never get back your IMEI. If you did flash the last stock try using the lenovo moto assistant tool, go to flash and the to rescue. Mybe that will save you
Click to expand...
Click to collapse
Thanks, it worked for me, install the latest stock ROM ... and if it worked

i have the same problem
juampapo546 said:
Hello, just to have it clear, you flashed the lastest stock? If you fash a previous stock you will never get back your IMEI. If you did flash the last stock try using the lenovo moto assistant tool, go to flash and the to rescue. Mybe that will save you
Click to expand...
Click to collapse
hola juampa como estas. yo tengo el mismo problema con mi dispositivo ALI (moto g6). me había instalado una custom rom teniendo previamente el ultimo parche de seguridad de android instalado con el motorola manager. luego cuando me quise regresar a la ultima versión de stock mi IMEI quedó en 0. la duda que tengo es que el fallo me apareció con la ultima versión. podrías ayudarme? he estado intentando comunicarme con vos pero no tuve exito. espero que leas este comentario. por favor agradecería tu ayuda. te prometo que te dono a tu PayPal si lo logro hacer funcionar. Un abrazo desde argentina.

Question Is there a specific Driver I should be using so that my phone is seen on my windows pc?

I keep trying to do adb devices or fastboot devices to get this Cricket Dream 5g to show up and i cannot figure it out to save my life.
Is there a specific Driver that i need to install for the computer to see the Dream 5G when it's in fastboot mode?

Aeikozz said:
I keep trying to do adb devices or fastboot devices to get this Cricket Dream 5g to show up and i cannot figure it out to save my life.
Is there a specific Driver that i need to install for the computer to see the Dream 5G when it's in fastboot mode?
Click to expand...
Click to collapse
From wiki.lineageos.org:
Download the Windows zip from Google.
Extract it somewhere - for example, %USERPROFILE%\adb-fastboot
On Windows 7/8:
From the desktop, right-click My Computer and select Properties
In the System Properties window, click on the Advanced tab
In the Advanced section, click the Environment Variables button
In the Environment Variables window, highlight the Path variable in the Systems Variable section and click the Edit button
Append ;%USERPROFILE%\adb-fastboot\platform-tools to the end of the existing Path definition (the semi-colon separates each path entry)
On Windows 10:
Open the Start menu, and type “advanced system settings”
Select “View advanced system settings”
Click on the Advanced tab
Open the “Environment Variables” window
Select the Path variable under “System Variables” and click the “Edit” button
Click the “New” button
Insert %USERPROFILE%\adb-fastboot\platform-tools in the text field
Download the USB drivers and follow the instructions there.

ethical_haquer said:
De wiki.lineageos.org :
Descarga el zip de Windows de Google.
Extráigalo en algún lugar, por ejemplo, %USERPROFILE%\adb-fastboot
En Windows 7/8:
Desde el escritorio, haga clic derecho en Mi PC y seleccione Propiedades
En la ventana Propiedades del sistema, haga clic en la pestaña Avanzado
En la sección Avanzado, haga clic en el botón Variables de entorno
En la ventana Variables de entorno, resalte la variable Ruta en la sección Variable de sistemas y haga clic en el botón Editar
Agregue %USERPROFILE%\adb-fastboot\platform-tools al final de la definición de ruta existente (el punto y coma separa cada entrada de ruta)
En Windows 10:
Abra el menú Inicio y escriba "configuración avanzada del sistema"
Seleccione "Ver configuración avanzada del sistema"
Haga clic en la pestaña Avanzado
Abra la ventana "Variables de entorno"
Seleccione la variable Ruta en "Variables del sistema" y haga clic en el botón "Editar"
Haga clic en el botón "Nuevo"
Inserte %USERPROFILE%\adb-fastboot\platform-tools en el campo de texto
Descargue los controladores USB y siga las instrucciones allí.
Click to expand...
Click to collapse
hola soy nuevo en esto alguien me podría ayudar con el procedimiento para cargar la ROM a este dispositivo . gracias

Quintana9710 said:
hola soy nuevo en esto alguien me podría ayudar con el procedimiento para cargar la ROM a este dispositivo . gracias
Click to expand...
Click to collapse
Please translate your post, feel free to keep the original version along with the translated one.

ethical_haquer said:
Traduzca su publicación, siéntase libre de conservar la versión original junto con la traducida.
Click to expand...
Click to collapse
ethical_haquer said:
Please translate your post, feel free to keep the original version along with the translated one.
Click to expand...
Click to collapse
Hello, I am new in this, someone could help me with the procedure to load the ROM to this device. EC211001 model. thank you

Quintana9710 said:
Hello, I am new in this, someone could help me with the procedure to load the ROM to this device. EC211001 model. thank you
Click to expand...
Click to collapse
Which ROM?

I already have the factory rom. I don't know the steps to install it on the device. I want to install the rom because the phone turns me on and stays on a sign that says it's corrupted

Quintana9710 said:
I already have the factory rom. I don't know the steps to install it on the device. I want to install the rom because the phone turns me on and stays on a sign that says it's corrupted
Click to expand...
Click to collapse
Alright, I'll have to help you tomorrow. Sorry.

Ok my friend

Hi

Quintana9710 said:
Hi
Click to expand...
Click to collapse
Alright, so what is your situation right now? It sounds like you have the stock ROM installed, and it's corrupted, but what phone is it?

ethical_haquer said:
Muy bien, entonces, ¿cuál es tu situación en este momento? Parece que tiene instalada la ROM estándar y está dañada, pero ¿qué teléfono es?
Click to expand...
Click to collapse
Cricket dream 5g ec211001

I have the rom. I don't know how to install it on the device. and installed several phones before but this rom does not have the file (scater)

what I need are the steps to be able to install the ROM

Quintana9710 said:
what I need are the steps to be able to install the ROM
Click to expand...
Click to collapse
I've only used Samsung devices, so I'm honestly not sure if I will be able to help you. I would recommend starting your own thread on this forum so more people will see it. Chances are somebody here knows how to flash your device. Right now your question is buried on a thread called "
Is there a specific Driver I should be using so that my phone is seen on my windows pc?​"
Your question isn't really related to it. Sorry that I couldn't help.