I was wiping my Cache in TWRP on Pixel Experience 10 and I accidentally wiped data as well. Despite this, I figured the worst thing that would happen is I would have install my apps again.... Instead my phone would directly boot to recovery, and the internal storage directory was now a bunch of folders with unrecognizable filenames. ****.. I figured if I format data I would at least get it to boot again. Nope still straight to recovery. So I thought I would reinstall the ROM by flashing miui_DAVINCI_V11.0.2.0.QFJCNXM_f6f375d6c4_10.0, formating it again then installing PixelExperience_davinci-10.0-20191225-0807-OFFICIAL. Still going straight to recovery....
I am worried I've permanently bricked it somehow by wrecking the system partition or something along those lines. Has anyone experienced this have some suggestion on what I could try. Would fastbooting davinci_global_images_V11.0.1.0.PFJMIXM_20191028.0000.00_9.0_global_156b6de73d.tgz possibly fix this? Any help would be greatly appreciated, I really hope I don't need to buy a new phone after this mishap
You're phone is encrypted because it cannot boot probably, but you should be able to enter your password in recovery.. but if you have a bootloop while encryption is enabled sometimes it doesn't recognize the password (in my experience). i know you want to keep some stuff, but what i would do is dirty flash custom rom (and gapps if that is needed for the rom). If that still doesn't want to boot you should clean flash the rom.
I used TWRP from LR team, but the official should also work. If the phone is still not booting you'll have to return to stock i think... Thats what i did.
---------- Post added at 08:10 PM ---------- Previous post was at 08:07 PM ----------
Btw forgot to mention, reverting to stock doesn't really work well with a custom recovery sometimes. I flashed an xiaomi.eu rom from xda which did not work for me. But i downloaded an official full update from Xiaomi and installed it with twrp. I lost twrp, but back at my pc a did not fastboot flash it again, but just only booted so i could flash magisk and go on that road
its the peanut said:
You're phone is encrypted because it cannot boot probably, but you should be able to enter your password in recovery.. but if you have a bootloop while encryption is enabled sometimes it doesn't recognize the password (in my experience). i know you want to keep some stuff, but what i would do is dirty flash custom rom (and gapps if that is needed for the rom). If that still doesn't want to boot you should clean flash the rom.
I used TWRP from LR team, but the official should also work. If the phone is still not booting you'll have to return to stock i think... Thats what i did.
---------- Post added at 08:10 PM ---------- Previous post was at 08:07 PM ----------
Btw forgot to mention, reverting to stock doesn't really work well with a custom recovery sometimes. I flashed an xiaomi.eu rom from xda which did not work for me. But i downloaded an official full update from Xiaomi and installed it with twrp. I lost twrp, but back at my pc a did not fastboot flash it again, but just only booted so i could flash magisk and go on that road
Click to expand...
Click to collapse
I never encrypted it and there is no password prompt from what I can tell. The phone just boots into the main menu of TWRP even after I format and install custom rom.... If I could just get it to boot it would be a success. If I Fastboot to V11.0.1.0.PFJMIXM from V11.0.2.0.QFJCNXM could that pose any problems you think?
rickbos said:
I never encrypted it and there is no password prompt from what I can tell. The phone just boots into the main menu of TWRP even after I format and install custom rom.... If I could just get it to boot it would be a success. If I go from V11.0.2.0.QFJCNXM to V11.0.1.0.PFJMIXM could that pose any problems you think?
Click to expand...
Click to collapse
Well yes.
In these times almost every device has been encrypted straight out of the box... Most of them (correct me if i am wrong). My oneplus 6 is encrypted, and same for my Mi 9T. You don't have to do it cause it's already done by Xiaomi in case of theft or when you lose it. Handy for those situations but a pain when you brick your phone because twrp wont be able to read the data. Now i don't need encryption because i always have my hands in my pockets so I'll know when it gets stolen.
I don't know what recovery you are using but i read that some of them can't read encryption properly. But what i do know is that the latest TWRP by LR team does read it good and can also disable the encryption and have backup working. There is an thread on xda for all available recoverys where its included, you can try the one from LR and maybe it can read it or ask for a password.
You can also try to stick in a USB via OTG (cable or adapter), redownload the files (as i guess the rom and stuff is stored on your phone?) And put them on the usb, mount it in twrp and flash it that way because a usb otg is not encrypted and can be read. I always put my files and backups on the usb otg so i dont screw myself.
Before going to stock just try the LR team TWRP and/or the OTG method, if you can boot the phone properly and unlock it then you should be good. After that you can backup everything and maybe if you want proceed to decrypt the phone.
For decrypting, there is also an xda thread about it using the LR teams twrp, but i will warn you! Back up everything because decrypting requires to format data so you'll probably wipe everything. It's all in those threads
---------- Post added at 09:16 PM ---------- Previous post was at 08:32 PM ----------
I used this website for my stock rom, if you can boot anything try from here (I don't know if it's official, but it worked)
I could not boot my phone, it got in bootloop or back to recovery. I flashed the zip file with twrp from LR and also official version and both worked but for some reason i cannot change my region, its stuck on china and i want it to the Netherlands... But it is not a big deal.
Now be careful, you'll have to choose your device. But when you choose the Mi9T series it also combines the Mi 9, Mi 9T and the 9T Pro... And also region specific.
In my case it was the Mi 9T EEA (europe) and miui V11.0.3 (miui 10). Check it to be sure!
https://c.mi.com/miuidownload/index
I can't remember how to post URL's
(Edit) seems URL's get fixed when posted on auto
its the peanut said:
Well yes.
In these times almost every device has been encrypted straight out of the box... Most of them (correct me if i am wrong). My oneplus 6 is encrypted, and same for my Mi 9T. You don't have to do it cause it's already done by Xiaomi in case of theft or when you lose it. Handy for those situations but a pain when you brick your phone because twrp wont be able to read the data. Now i don't need encryption because i always have my hands in my pockets so I'll know when it gets stolen.
I don't know what recovery you are using but i read that some of them can't read encryption properly. But what i do know is that the latest TWRP by LR team does read it good and can also disable the encryption and have backup working. There is an thread on xda for all available recoverys where its included, you can try the one from LR and maybe it can read it or ask for a password.
You can also try to stick in a USB via OTG (cable or adapter), redownload the files (as i guess the rom and stuff is stored on your phone?) And put them on the usb, mount it in twrp and flash it that way because a usb otg is not encrypted and can be read. I always put my files and backups on the usb otg so i dont screw myself.
Before going to stock just try the LR team TWRP and/or the OTG method, if you can boot the phone properly and unlock it then you should be good. After that you can backup everything and maybe if you want proceed to decrypt the phone.
For decrypting, there is also an xda thread about it using the LR teams twrp, but i will warn you! Back up everything because decrypting requires to format data so you'll probably wipe everything. It's all in those threads
---------- Post added at 09:16 PM ---------- Previous post was at 08:32 PM ----------
I used this website for my stock rom, if you can boot anything try from here (I don't know if it's official, but it worked)
I could not boot my phone, it got in bootloop or back to recovery. I flashed the zip file with twrp from LR and also official version and both worked but for some reason i cannot change my region, its stuck on china and i want it to the Netherlands... But it is not a big deal.
Now be careful, you'll have to choose your device. But when you choose the Mi9T series it also combines the Mi 9, Mi 9T and the 9T Pro... And also region specific.
In my case it was the Mi 9T EEA (europe) and miui V11.0.3 (miui 10). Check it to be sure!
https://c.mi.com/miuidownload/index
I can't remember how to post URL's
(Edit) seems URL's get fixed when posted on auto
Click to expand...
Click to collapse
Thank you for your help. It seems the only way around this is to decrypt it but I am not sure how that is done. I am on the official twrp-3.3.1-0-davinci from teamwin. When I try to reinstall a custom rom it says "E:Unable to decrypt FBE device" before running the rest of the commands. This is still after I have formated data...
rickbos said:
Thank you for your help. It seems the only way around this is to decrypt it but I am not sure how that is done. I am on the official twrp-3.3.1-0-davinci from teamwin. When I try to reinstall a custom rom it says "E:Unable to decrypt FBE device" before running the rest of the commands. This is still after I have formated data...
Click to expand...
Click to collapse
I ran into that FBE message yeah, but i was able to flash. I have decrypted before doing anything. Btw i am not sure but i think the twrp you are using is older then available now, marionofro (correct is misspelled) made a newer i think. But i have had no problems with LR. Seems that people say you can ignore that fbe message if you can proceed.
I'll post the links below that i used. The first one will be the thread for twrp by LR (its combined with a few others to choose from and also a linked thread to how to install) but if twrp is working and you have an usb on the go you could install that version through that way and install as recovery img. Or you have to fastboot flash it. Btw if you flash miui via twrp you will loose twrp and get stock recovery. With twrp the rom didnt seem to want to boot
The other link is for decrypting, but before this try to dirty flash your rom... Or clean flash via LR twrp so you might save the storage (do not wipe internal or format data yet). If that didn't work, then try to decrypt following those instructions, flash the rom you want and then i thing was change something in the extra options with forceencrypt.
Thread collection of multiple twrp versions, recommend the one from LR
https://forum.xda-developers.com/mi-9t/how-to/twrp-versions-xiaomi-mi-9t-t3955946
Tutorial for decrypting, READ IT CAREFULLY and do exactly as said as if you do it wrong you can make it worse. The required and fully working twrp is also linked there i think.
https://forum.xda-developers.com/Mi-9/how-to/tutorial-howto-decrypt-phone-backup-t3930946
Here is also a handy tool for pc to flash certain things, and our device is supported, i used it to temporarily boot twrp to flash certain zips without flashing the recovery. Might be handy for flashing fastboot stuff too.
https://forum.xda-developers.com/mi-9t/development/tool-tool-one-driverstwrpfactory-t4009871
Thank you so much this really helped me out. Unfortunately it seems as though I will have decrypt everytime I load a ROM and I lost my data since I had to format but at least I am having it boot up again. Many thanks from Canada!!!
rickbos said:
Thank you so much this really helped me out. Unfortunately it seems as though I will have decrypt everytime I load a ROM and I lost my data since I had to format but at least I am having it boot up again. Many thanks from Canada!!!
Click to expand...
Click to collapse
Happy to help.
Thats the down part of encryption/decryption... You have to take in account that you will loose data. That is why i back everything up on an external device that i can plug into the phone by OTG method.
Greetings from Holland
Related
I unlocked my ZTE Bootloader, then flashed twrp-3.2.1-0-ailsa_ii and rooted by flashing SR2-SuperSU-v2.79-SR2-20170103215521.zip. So far soo good.
However, then I installed the following:
A2017X_BootStack_B32+B10.zip (got constant Error 7 with Universal Bootloader)
AospExtended-v5.4-axon7-20180504-1942.zip Oreo 8.1
Open Gapps 8.1 ARM64 Stock
A2017G_N_Modem.zip
Now there are several problems:
Can't boot into Bootloader, phone will just hang at the Startup Logo. When I start with Vol Down+Power I get into Safe Mode.
When starting TWRP it asks for a PIN, that I gave as a lock PIN in the ROM
There is an error message in TWRP saying "unable to mount storage"
When starting Android it also asks the PIN before starting the ROM
Root is gone and I'm unable to root again by flashing SR2-SuperSU-v2.79-SR2-20170103215521.zip. It will flash, but Root is still gone
The Gapps camera forcecloses
I have already wiped everything and reinstalled, but it didn't help. Anyone an idea?
When I flashed AEX Oreo, I used NFound's TWRP 3.2.1-7 from this link.
But that doesn't solve that I can't boot into Bootloader, right?
You can't get into bootloader and recovery?
No, just bootloader. But a new recovery won't help that, right?
When I start with Vol Down+Power I get into Safe Mode.
Also, do you have to give your PIN for the ROM to start?
According to this, in B32 it doesn't allow you to access bootloader not sure about B35.
---------- Post added at 12:48 PM ---------- Previous post was at 12:46 PM ----------
You might have to format your internal storage, it sounds like it got encrypted. I had that before when I foolishly uninstalled magisk root and twrp couldn't access storage as well.
Are you revering to my Build Number? I'm on OPM2.171019029
Do I have to flash an No Encrypt File afterwards? I have read about people flashing no-verity-opt-encrypt-5.0.zip on TWRP.
ro-mann said:
Are you revering to my Build Number? I'm on OPM2.171019029
Do I have to flash an No Encrypt File afterwards? I have read about people flashing no-verity-opt-encrypt-5.0.zip on TWRP.
Click to expand...
Click to collapse
The B32 is the bootloader version, what I did was go to twrp and Wipe>Advanced Wipe>Format Data then flash everything again. I don't have experience with the no-verity zip, I just format and flashed bootloader, modem, ROM, GApps and Magisk.
Wiped everything, still PIN prompt in TWRP and "unable to mount storage" error
This is out of my league (I'm out of ideas) but give this a try. If you can boot into the rom, try using the EDL Tool to flash a stock edl package and then read through here on what to do next.
Reflashed TWRP now I have a second error: "E:recv error on uevent"..
If I'm not mistaken, and according your first post, it looks like you're not flashing root after the ROM. If one flashes and boots ROM without rooting it things like encryption and/or filesystem change happens.
Note on the gapps. Best to use something smaller like pico or nano for the time being. Usually recommended. Larger packages like stock and full may cause issues.
ZTE Axon 7 A2017U, AospExtended v5.4 ROM, HELLSGATE Kernel, Multiboot, Tapatalk 4.9.3
hi you can grab download link from here
https://www.xda-developers.com/android-pie-beta-xiaomi-mi-max-3/
google play store keeps stopping =/
Hi,
I do assume that if I install this, I will get a device that is ARB protected.
Can you confirm that ?
Regards.
Moirae said:
google play store keeps stopping =/
Click to expand...
Click to collapse
i think its china rom and because of that play service stops:/
i cant even flash it...
I think we have to download google apps from the mi store and change permissions for it to work.
Can someone send Bigota link for 8.11.27 OTA? Thanks
NexusPenguin said:
Hi,
I do assume that if I install this, I will get a device that is ARB protected.
Can you confirm that ?
Regards.
Click to expand...
Click to collapse
ARB yes
Has anyone used https://opengapps.org/ to install all Googly things with this ROM yet.
There is no download link
Ignore me I found it? How long does it take to boot? Used red wolf and was on miui.eu latest?
flashed using red wolf was ok but stuck at boot logo. the dots are moving but rom is not booting up
Im using this new pie rom for hours and its super smooth and fluid
full screen gestgures are now super fast and with no stutters
flash this rom and other official miui zip roms using nijel8 twrp recovery otherwise it will not boot
pejji said:
Im using this new pie rom for hours and its super smooth and fluid
full screen gestgures are now super fast and with no stutters
flash this rom and other official miui zip roms using nijel8 twrp recovery otherwise it will not boot
Click to expand...
Click to collapse
going to try this now lets hope you are right as i have tried everything else and various combinations to get this booting...........
it didnt boot so starting to think this is fake rom. i tried clean flash on miui.eu rom then flashed stock gobal and clean flashed again. used this recovery and same results. it sits on boot screen with the dots flashing and nothing else happens...........how long did yours take to boot?
shingers5 said:
going to try this now lets hope you are right as i have tried everything else and various combinations to get this booting...........
Click to expand...
Click to collapse
try it and if didnt boot here are my steps if i remember correctly :
-flash latest global developer fastboot rom with mi flash (flash all , be careful with locking bootloader accidentally )
-wait until first boot before phone setup and don't go through it
-reboot to fastboot mode and flash nijel twrp
-reboot directly to recovery
-wipe->factory reset
-flash 8.11.26 pie
-reboot system
Exatly as for me. Flashed with nigel TWRP, with format data before. Few issues but CN firmware... Google must be installed.
ok will do that now and report
i flashed latest global then tried to flash with that recovery but nothing.
i am now going to flash china dev latest and try again
---------- Post added at 07:31 PM ---------- Previous post was at 07:24 PM ----------
so to be clear
i am gonna flash dev global 8.11.23 via fastboot
then wait for it to get to 1st set up screen but not go through the setup process
will then flash that twrp you mentioned via fastboot
and flash the rom after factory reset
shingers5 said:
ok will do that now and report
i flashed latest global then tried to flash with that recovery but nothing.
i am now going to flash china dev latest and try again
---------- Post added at 07:31 PM ---------- Previous post was at 07:24 PM ----------
so to be clear
i am gonna flash dev global 8.11.23 via fastboot
then wait for it to get to 1st set up screen but not go through the setup process
will then flash that twrp you mentioned via fastboot
and flash the rom after factory reset
Click to expand...
Click to collapse
i did exactly what you said again just to be sure
and it booted up with no problem
- mi flash->global 8.11.23 -> clean all
- first boot until welcome screen
- power off-> volume down+power -> fastboot and run "fastboot flash recovery nijeltwrp.img"
- volume up+power to boot to recovery
(so far if decryption goes well twrp shuold not request decryption password and you could mount data and see internal storage contents in /sdcard with no problem in twrp file manager)
- wipe->factory reset
- install pie zip rom 8.11.26
- wipe dalvik+cache
- reboot system
it took about 4 or 5 minutes for me to boot
If I've gone straight from the latest stock China ROM to xiaomi.eu 10.0.0.6.0 and have since flashed the latest nijel TWRP - which is all working fine.
Can I simply flash to this pie release or do I need to have previously flashed one of the developer ROMs?
Guys, quick conformation, please as I hear conflicting reports about MIUI Pie and my TWRP...
Please, from experience, decryption works, right? How about formatting data with TWRP and boot to Pie? Is MIUI Pie able to encrypt fresh data partition? And if yes is TWRP able to decrypt it again?
Thank you, feedback is really appreciated so I know what needs to be done for full Pie compatibility!!!
eresen said:
has anyone used https://opengapps.org/ to install all googly things with this rom yet.
Click to expand...
Click to collapse
nijel8 said:
Guys, quick conformation, please as I hear conflicting reports about MIUI Pie and my TWRP...
Please, from experience, decryption works, right? How about formatting data with TWRP and boot to Pie? Is MIUI Pie able to encrypt fresh data partition? And if yes is TWRP able to decrypt it again?
Thank you, feedback is really appreciated so I know what needs to be done for full Pie compatibility!!!
Click to expand...
Click to collapse
You can't decrypt it anymore!
nijel8 said:
Guys, quick conformation, please as I hear conflicting reports about MIUI Pie and my TWRP...
Please, from experience, decryption works, right? How about formatting data with TWRP and boot to Pie? Is MIUI Pie able to encrypt fresh data partition? And if yes is TWRP able to decrypt it again?
Thank you, feedback is really appreciated so I know what needs to be done for full Pie compatibility!!!
Click to expand...
Click to collapse
first thanks again for your great work on this recovery
decryption was good with oreo 8.11.15 china rom but right after pie rom boots and rebooting to recovery, decryption fails
from there rebooting to recovery again doesn't change anything ... recovery asks for decryption password every time.
and cuz data partition is not mounted so recovery log will not be saved to internal memory to attach it here
after formatting data miui boots successfully and encrypts data again.setting up the phone and rebooting to recovery ... but same thing happens and decryption fails.
Very stupid question. ive never had a A/B device before so how would i go about flashing twrp and a custom rom with the 2 partitions
TWRP installer, installs to both A and B [emoji6]
---------- Post added at 10:26 PM ---------- Previous post was at 10:24 PM ----------
If you read the log as it is flashing you should see it being flashed to both.
Sobreally it's just the same as before
What version of TWRP are you using? The latest?
RevTheory said:
Very stupid question. ive never had a A/B device before so how would i go about flashing twrp and a custom rom with the 2 partitions
Click to expand...
Click to collapse
It's not stupid at all actually. I've been having the same question and concerns myself regarding the A/B partition slot setup and would love a descriptive tutorial on the differences between this and prior OP devices when it comes to flashing/installing custom ROMs, mods and other zip files.
RevTheory said:
Very stupid question. ive never had a A/B device before so how would i go about flashing twrp and a custom rom with the 2 partitions
Click to expand...
Click to collapse
Daskalman said:
It's not stupid at all actually. I've been having the same question and concerns myself regarding the A/B partition slot setup and would love a descriptive tutorial on the differences between this and prior OP devices when it comes to flashing/installing custom ROMs, mods and other zip files.
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/guide-noobs-guide-to-b-partitions-op6-t3816123
When I reboot recovery after flashing a new rom and also flashing TWRP again (newest version), why are all my files "missing" and replaced with a bunch of weird looking files? Mind you, when I boot system and then go back to recovery, all the proper files are showing again.
Right now I flashed a new rom and TWRP and rebooted recovery and then tried to boot into system, but it keeps booting back to recovery and isn't showing my proper files, so I can't fix by flashing something else or using one of my backups.
Lochman79 said:
When I reboot recovery after flashing a new rom and also flashing TWRP again (newest version), why are all my files "missing" and replaced with a bunch of weird looking files? Mind you, when I boot system and then go back to recovery, all the proper files are showing again.
Right now I flashed a new rom and TWRP and rebooted recovery and then tried to boot into system, but it keeps booting back to recovery and isn't showing my proper files, so I can't fix by flashing something else or using one of my backups.
Click to expand...
Click to collapse
The same is happening to me trying to flash the latest OOS I'm on slot a, I flash the Magisk uninstaller, then OOS, then TWRP installer.. when I boot back to TWRP everything is just a garbled mix of file names.. I go to the reboot menu and select boot from "a" slot, and it's back to normal... Haven't tried anything else, still getting used to the whole a/b partition thing..
That is nice though, if the flash doesn't work, just go into recovery and boot from the other slot and it's the device as it was before flashing...
I also want to say if you wipe data it should boot.. if that doesn't work, you can format data in twrp.. clears your internal storage but it should boot...
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Soapy! said:
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
Click to expand...
Click to collapse
i have experience that, then i flash the twrp chinese version and it works.
@flamedrops which one if i may know? I tried 3.3.1-0916-redmi_k20-CN and still not work ?
Soapy! said:
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
Click to expand...
Click to collapse
I got exactly the same problem after installing miui 11rom. Installing firmware via fastboot was unsuccessful. God, help us ...
---------- Post added at 07:44 AM ---------- Previous post was at 07:33 AM ----------
Arif Ferdian said:
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Click to expand...
Click to collapse
Just the exact same problem as mine. If you know anything about how to solve this problem, please tell us.
I had the same problem with a miui 10 weekly beta but unfortunately I wasn't able to fix it but lucky me my phone was still in a return period so I returned it back to Amazon and got my money back since then I have always stayed away from beta ROMs . I tried everything but it wasn't booting pass the mi logo as you said
flamedrops said:
i have experience that, then i flash the twrp chinese version and it works.
Click to expand...
Click to collapse
Benfatica said:
I had the same problem with a miui 10 weekly beta but unfortunately I wasn't able to fix it but lucky me my phone was still in a return period so I returned it back to Amazon and got my money back since then I have always stayed away from beta ROMs . I tried everything but it wasn't booting pass the mi logo as you said
Click to expand...
Click to collapse
Ahhhh yes, i was thinking to using my guaranteed card, as i still can relock bootliader with mi flash tools, already trying anything for couples day with zero result, and im giving up hahaha
Arif Ferdian said:
Ahhhh yes, i was thinking to using my guaranteed card, as i still can relock bootliader with mi flash tools, already trying anything for couples day with zero result, and im giving up hahaha
Click to expand...
Click to collapse
did you really reboot it using adb reboot twrp? and reboot system on twrp using twrp cn version?
Yap @flamedrops i already do, and even tried all the TWRP version that exist, and also reflash many Rom, from stock, eu, ct, aosp, miui 11 25, miui 11 26, i flash from adb sideload, from twrp via usb otg, via miflash tool,
I flash boot.img, etc
Still no result.
Already tried everything that i could thinking about
flamedrops said:
did you really reboot it using adb reboot twrp? and reboot system on twrp using twrp cn version?
Click to expand...
Click to collapse
This LR. TEAM is twrp cn version right? And in fact, this version hardly booting to twrp ui version after this problem, easier to entering twrp ui with the ugly themed greek version
Arif Ferdian said:
This LR. TEAM is twrp cn version right? And in fact, this version hardly booting to twrp ui version after this problem, easier to entering twrp ui with the ugly themed greek version
Click to expand...
Click to collapse
ok, yes thats it. have you tried to flash magisk?
@flamedrops not yet, i never tried to flash magisk yet, ill tried next time i could pass twrp splash screen
flamedrops said:
i have experience that, then i flash the twrp chinese version and it works.
Click to expand...
Click to collapse
Can you list your steps to fix this? My data and cache partitions are 0kb and i get i/o errors too.
I have persist problems after installing muiu 11 over the los16.
Thinking about relock it and sens it back to aliexpress seller.
@mvha just go into fastboot mode, and flash persist.img from stock fastboot rom,
With command : fastboot flash persist persist.img
Thats all
Arif Ferdian said:
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Click to expand...
Click to collapse
This makes sense as I remember trying to boot into stock recovery early in the morning. I woke up and it finally booted, but the recovery was in Chinese. I will give 4PDA TWRP about an hour and see what I can do. Thanks.
Soapy! said:
This makes sense as I remember trying to boot into stock recovery early in the morning. I woke up and it finally booted, but the recovery was in Chinese. I will give 4PDA TWRP about an hour and see what I can do. Thanks.
Click to expand...
Click to collapse
If you can not use 4pda, i suggest u to use greek one, thats twrp version the must successfully booting in my experiences
I am thankful that I saw this before updating to newest miui 11
flamedrops said:
ok, yes thats it. have you tried to flash magisk?
Click to expand...
Click to collapse
Can not flash magisk, etc hahahhahaa
Arif Ferdian said:
If you can not use 4pda, i suggest u to use greek one, thats twrp version the must successfully booting in my experiences
Click to expand...
Click to collapse
After you used the Greek twrp did you manage to solve the problem?
I wanted to install the Xiaomi.eu rom this evening but instead I think I soft bricked my phone as it keeps booting into recovery.
I was on version 10.3.11 - not sure if this is a global or EEA rom?
Unlocking went without hickups
I've tried Miflashtool but not much luck with it using this file: davinci_global_images_V10.3.11.0.PFJMIXM_20190802.0000.00_9.0_global_ea6683ef55.tgz
Anyone able to tell me how to fix it?
While in recovery earlier I was unable to a backup, I was getting a error that it couldn't create a folder. I also couldn't copy any files to the phone.
It boot up once earlier but I couldn't enter my account password because it woudln't enable wifi. For what ever reason I just noticed after many boots in/out of twrp that it create a twrp folder and I've just been able to make a backup of the phone.
I can copy files to the phone, hopefully I can flash the original rom or xiaomi.eu rom now
---edit---
Flashed the Xiaomi.eu rom and it's just showing the redmi splash screen and eventually boots into a Chinese twrp.
Any way back to what I originally had?
BJozi said:
While in recovery earlier I was unable to a backup, I was getting a error that it couldn't create a folder. I also couldn't copy any files to the phone.
It boot up once earlier but I couldn't enter my account password because it woudln't enable wifi. For what ever reason I just noticed after many boots in/out of twrp that it create a twrp folder and I've just been able to make a backup of the phone.
I can copy files to the phone, hopefully I can flash the original rom or xiaomi.eu rom now
---edit---
Flashed the Xiaomi.eu rom and it's just showing the redmi splash screen and eventually boots into a Chinese twrp.
Any way back to what I originally had?
Click to expand...
Click to collapse
because you can boot into twrp, i think you could try formatting your data to boot into xiaomi.eu, or if everything goes bad you could use miflashtool to flash a fastboot rom back to global
---------- Post added at 01:41 AM ---------- Previous post was at 01:39 AM ----------
BJozi said:
While in recovery earlier I was unable to a backup, I was getting a error that it couldn't create a folder. I also couldn't copy any files to the phone.
It boot up once earlier but I couldn't enter my account password because it woudln't enable wifi. For what ever reason I just noticed after many boots in/out of twrp that it create a twrp folder and I've just been able to make a backup of the phone.
I can copy files to the phone, hopefully I can flash the original rom or xiaomi.eu rom now
---edit---
Flashed the Xiaomi.eu rom and it's just showing the redmi splash screen and eventually boots into a Chinese twrp.
Any way back to what I originally had?
Click to expand...
Click to collapse
try formatting the data
because you can boot into twrp, i think you could try formatting your data to boot into xiaomi.eu, or if everything goes bad you could use miflashtool to flash a fastboot rom back to global
I should have updated last night but it was very late and I was wrecked.
I eventually got the stock ROM back on, miflash was giving me errors about roll back and some others that wouldn't allow it to install.
I don't exactly remember what I did but it took many attempts and different twrp to eventually hey back to stock. At one point out was loading fine but WiFi wouldn't stay toggled on
All good now though, not flashing any other ROM until the pixel experience one goes official! What a night mare I had yesterday!