Running PayLife app on my rooted device - OnePlus 6T Questions & Answers

Does anyone know a workaround to run Paylife secCheck on a rooted OnePlus 6T? I'm rooted with Magisk 20.3 on OOS 10.3.0 and use ElementalX-OP6-4.00 on my device.
I'm able to install the PayLife app, but when I try to scan a QR-Code in the app I am told that it is not possible to use the app on rooted or jailbreaked devices. Trying to hide the app with Magisk Hide doesn't work either, the same error message is produced even after a restart of the device. Other Magisk-hided apps like Netflix run without issues...
Any chance to get the app running?
Ciao
Gerald

geko53 said:
Does anyone know a workaround to run Paylife secCheck on a rooted OnePlus 6T? I'm rooted with Magisk 20.3 on OOS 10.3.0 and use ElementalX-OP6-4.00 on my device.
I'm able to install the PayLife app, but when I try to scan a QR-Code in the app I am told that it is not possible to use the app on rooted or jailbreaked devices. Trying to hide the app with Magisk Hide doesn't work either, the same error message is produced even after a restart of the device. Other Magisk-hided apps like Netflix run without issues...
Any chance to get the app running?
Ciao
Gerald
Click to expand...
Click to collapse
In recent Magisk Manager there is an option to Hide Magisk Manager. Try that.

Great! Tx vmi... Now it works flawlessly. ?
Ciao
Gerald

geko53 said:
Great! Tx vmi... Now it works flawlessly. ?
Ciao
Gerald
Click to expand...
Click to collapse
Glad to Help.

Related

MISSING XPOSED?!!! because of 7.1.1 update?

Please note that this write up is based on the assumption that you have a rooted after updating firmware to 7.1.1 and also unlocked bootloader
On several ocassions I was tempted to take firmware upgrade to Anroid 7.1.1 but thinking of missing xposed, I was delaying it. Finally I decided to take the firmware update mainly because of several goodness packed in Android 7.1.1. Finally I updated my device with Android 7.1.1 and took following alternatives to enjoy the benefits that I was enjoying with xposed.
1. I hate softkeys and also wanting to always keep status bar immersive. Xposed immersive module was doing the job. I achieved the same wihtout xposed as below,
Added a line in build.prop qemu.hw.mainkeys=1, and restart phone hides navbar permenantly. Installed Tile Root to hide status bar and the good thing about this this app is that it doesn't loose notification pull down option. Once installed it will be seen in Quick settings as it doesn't have launcher. Using Quick settings edit, you can being the immersive button and use it to go immersive. We need Pie Control to manage the absence of navbar.[/URL]
2. YouTube background playback was possible with the help of xposed module. I managed the same screen off playback as below,
Installed OG YouTube which is a moded version of official YouTube. This has the ability to play YouTube in the background. You can search yourself to find this modded app
3. Magisk work for 7.1.1 hence if anyone wants to use Android Pay it is still possible
If anyone wants to find alternative for the xposed module that were in use until MM, please post here. We can collectively find a best possible options.
Xposed resurrection Remix 7.1.1?
Hi guys,i have RR-7.1.1 on my S4 mini GT-I9091 installed,installed xposed and cloakwork.Nut it appears that there is NO framework yet.İs that true or is it me who couldn't find it?İf there is a way to get it to work how can i?thanks in advance:good:
SkullzZ said:
Hi guys,i have RR-7.1.1 on my S4 mini GT-I9091 installed,installed xposed and cloakwork.Nut it appears that there is NO framework yet.İs that true or is it me who couldn't find it?İf there is a way to get it to work how can i?thanks in advance:good:
Click to expand...
Click to collapse
No xposed framework for Android 7.1.1 yet. I understood from xposed author that it is still in progress.
Sent from my Pixel using Tapatalk
smohanv said:
No xposed framework for Android 7.1.1 yet. I understood from xposed author that it is still in progress.
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
thanks a lot..i was so confused with checking to framworks that allready exists
YouTube ads can be filtered using xposed module YouTube Adaway. I am Adguard to do this job and selected HTTPS filtering instead of VPN option. It works better now. I can enjoy YouTube videos without ads which use to appear every 15min.
I miss some module that allowed to swipe up and down in the official youtube app for changing volume
smohanv said:
YouTube ads can be filtered using xposed module YouTube Adaway. I am Adguard to do this job and selected HTTPS filtering instead of VPN option. It works better now. I can enjoy YouTube videos without ads which use to appear every 15min.
Click to expand...
Click to collapse
I have always used adaway, does it work better and have any cons? thank you
Javi22 said:
I miss some module that allowed to swipe up and down in the official youtube app for changing volume
I have always used adaway, does it work better and have any cons? thank you
Click to expand...
Click to collapse
I am using adguard for two weeks now and do not see any issue. Also, adguard is helping to protect our privacy too.

[GUIDE][6/27/17] Magisk V13 + Rom + Passing SafetyNet + Working Modules for Pixel

I am creating this guide for Magisk v13 and working modules. Please let me know if there are additional ROMs that this guide works with, but I am trying to keep the steps as simple as possible.
Magisk Installation Instructions:
Download Latest PureNexus / PA ROM and follow those instructions
Boot into the ROM and go through the initial set up, at this point verify that SafetyNet is passing. If it is not you may need to factory reset and re-install your ROM.
Reboot into TWRP
Flash the attached modified Magisk-v13-Pixel (from Goodwin_c)
Flash the attached verified boot signer (from Chainfire)
Reboot the System
Uninstall the version of Magisk Manager that shows up in the drawer
Install the attached version of MagiskManager_v13_new5.apk (from Goodwin_c)
Open Magisk Manager (you may need to wait a bit, I had to clear it from my recents a few times before it launched and asked for file system permissions)
Go to the app settings and tick on Magisk Hide
Re-run SafetyNet and verify it's passing
Working Modules
I will create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
Modules I have modified to work with Pixel:
Emoji One - systemlessly replaces emojie font with Emoji One.
Tethering Enabler - enables tethering on phones where it is disabled by the manufacturer/provider.
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
mac796 said:
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
Click to expand...
Click to collapse
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
uodii said:
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
Click to expand...
Click to collapse
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
mac796 said:
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
Click to expand...
Click to collapse
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
That's cool maybe I'll give it another shot.
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
uodii said:
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
Click to expand...
Click to collapse
Yeah, I haven't tried Titanium backup, I'm using Solid Explorer and Greenify with root and they seem to work alright. I am still using new1, I will update to new5 and play with Titanium to see if I can get it to backup and reinstall an app
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
I'm very interessted about how to modify modules to work with Pixel device !
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Only custom rom? Anyone tried on stock image?
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
maflin18 said:
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
Click to expand...
Click to collapse
Try TWRP RC2
TENN3R said:
Only custom rom? Anyone tried on stock image?
Click to expand...
Click to collapse
The stock image should most likely work, if it works for you or someone else in this thread let me know and I'll update the OP.
y2kbugleung said:
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
Click to expand...
Click to collapse
I'll update the post date in brackets when I make updates here. Goodwin_c does not have his own thread, so I've just been monitoring his android file host account. The original poster has not updated or maintained his guide from the RR thread, so I created a new one to be as up-to-date as possible and include modules as I modify them.
foski said:
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Click to expand...
Click to collapse
I've included both of those. I basically have been using beyond compare to compare the arise module that works with pixel to other modules and re-zipping them and testing with my device.
I see. Thanks.
Btw do you know the difference between v1 and v5 apk?
It seems MagiskHide is gone on v5?
I have tried Magisk-V13 on Pixel-XL with stock ROM.
I haven't tried it with stock kernel, since SafetyNet won't pass (as far as I understand).
Tested with Elemental-X + MagiskManager-v1, SafetyNet does not pass. App always says "cannot use Play service"
Tested with Kirisakura-Rebase-1.36 + MagiskManager-v1, SafetyNet passes.
MagiskManager-v5 does not come with MagiskHide, so I assume it cannot handle SafetyNet.
Both MagiskManager v1 and v5 loads very slowly.
Before the UI could be used normally (it means Magisk is loaded?), ROOT cannot be obtained.
So those boot-up root-required action would probably fail.

[GUIDE] [VIPER4ANDROID] [Android 8.0.0]

Hi everybody,
I want to show you how to install Viper4android on your phone running developer preview 3 or later with Android O.
IM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE!!
First download the zip from Androidfilehost or from below.
Zip
https://www.androidfilehost.com/?fid=673368273298967857
Busybox
https://www.androidfilehost.com/?fid=961840155545578665
Extract it to any folder, you will have two files now, a Viper4android App and a flashable Viper4android zip.
Reboot into recovery and install the zip, I also recommend a custom kernel like the Jolla Kernel which already has Android O support for loudness control (for my Nexus 5X).
Boot normally install BusyBox and launch Viper4android.
Select install drivers, grant root permission and wait until it is installed.
If a IO Error occurrs don't worry it'll work anyway.
Reboot and open any file manager.
Delete the Viper4android folder in "/system/priv-app".
Delete "/system/vendor/etc/audio_effects".
Install Viper4android app you downloaded before.
Reboot once again and open Viper4android - driver are working now.
Tested on my Nexus 5X with Android 8 developer preview 3.
Leave a like if it helped.
Reserved
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
vijaygogawale said:
Kindly share BusyBox APK.. as play store busy box unable to work.. can't install properly..
Click to expand...
Click to collapse
Ok
Done Androidfilehost link is uodated
Thargorsson said:
Ok
Done Androidfilehost link is uodated
Click to expand...
Click to collapse
App installed.. but busy box not installed.. error
vijaygogawale said:
App installed.. but busy box not installed.. error
Click to expand...
Click to collapse
Which device do you have and which Android kernel, android version etc... I need Basic information.
Thargorsson said:
Which device do you have and which Android kernel, android version etc... I need Basic information.
Click to expand...
Click to collapse
Device Angler,
Kernel Stock,
Android 8 DP3,
vijaygogawale said:
Device Angler,
Kernel Stock,
Android 8 DP3,
Click to expand...
Click to collapse
Systemless root?
And which supersu
Thargorsson said:
Systemless root?
And which supersu
Click to expand...
Click to collapse
Magisk v13,
vijaygogawale said:
Magisk v13,
Click to expand...
Click to collapse
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Thargorsson said:
Aha I've only tested with latest supersu that might be the problem.
Try the 2.82 version.
Click to expand...
Click to collapse
Will try and report back
vijaygogawale said:
Will try and report back
Click to expand...
Click to collapse
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Thargorsson said:
Good. btw did you deleted the old Viper4android folder and installed the new app as user app? And changing enforce to permissive also fix some problems.
Click to expand...
Click to collapse
Working now, phonograph not supported.
vijaygogawale said:
Working now, phonograph not supported.
Click to expand...
Click to collapse
Cool
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
jbirdyRazr said:
Anybody get this working on Pixel XL (Marlin) on 8.0 - Sept security release? SuperSu 2.82 - SR4
Click to expand...
Click to collapse
Hows the exact process you wen through?
I have not implemented yet. Was wondering if anybody else had. Now using SuperSu 2.82-SR5 and TWRP 3.1.1.0. Now that TRWP works now without having to fastboot, I will try this mod. If I get it working I will let you know.
Ah k
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
snehgada said:
I went through the entire procedure including deleting the system app and installing the io fix version.
The app tells me that drivers are working but i there is no difference in sound.
Turing Master power on and off dosen't seam to make any diffrence. What is going on?
Click to expand...
Click to collapse
Which device, Rom and kernel? And also which music player are you using? Also try enabke developer options in Viper and select disable selinux and/or enable FX compatibility mode.

f-droid expert mode - f-droid privileged extension not appearing

I'm trying to install the f-droid privileged extension OTA zip, but after flashing it in TWRP, when I open F-Droid, the 'Expert mode' in the settings doesn't show it.
Steps I took....
1. Installed the FDroid.apk downloaded from https://f-droid.org/en/
2. Booted into TWRP and flashed the org.fdroid.fdroid.privileged.ota_2070 downloaded from here;
https://f-droid.org/packages/org.fdroid.fdroid.privileged.ota/
Here's the actual path to the OTA zip;
https://f-droid.org/repo/org.fdroid.fdroid.privileged.ota_2070.zip
Rebooted back into ROM, which by the way is AOSiP 5.6, started F-Droid for the first time, went to settings, Expert Mode, and nothing...
So here the developer puts out the OTA zip to flash in TWRP, it's mentioned here;
https://gitlab.com/fdroid/privileged-extension/
Then it's not working, or I'm missing something? Does anyone know how to do this manually? When I look at the site for the OTA it says this, Fixed OTA ZIP for Android 8.0 Oreo, and the custom roms is Oreo 8.1.0, so maybe this isn't supported?
I know there is Magisk Module and NanoDroid for F-Droid, but for now, I'd like to figure out why this OTA zip is not working?
Also can anyone explain, what the Pros & Cons are of installing manually VS using NanoDroid-Fdroid or Magisk?
Install fdroid priv extension from magisk
apexashwin said:
Install fdroid priv extension from magisk
Click to expand...
Click to collapse
I already know about using NanoDroid-Fdroid or Magisk, I'm just trying to figure out why this won't work manually.
It seems now after looking at this, the DEV hasn't updated this for Oreo 8.1.0 that the custom roms are using, so I'm working on it...
DoR3M3 said:
I already know about using NanoDroid-Fdroid or Magisk, I'm just trying to figure out why this won't work manually.
It seems now after looking at this, the DEV hasn't updated this for Oreo 8.1.0 that the custom roms are using, so I'm working on it...
Click to expand...
Click to collapse
apexashwin said:
Install fdroid priv extension from magisk
Click to expand...
Click to collapse
apexashwin said:
Click to expand...
Click to collapse
LOL, you always give me a funny face...
Anyhow, as I was looking around I found a issue on the Mi A1 that the developer is working on, in case you'd like to follow it, or anyone else interested in this for the Mi A1.
https://gitlab.com/fdroid/privileged-extension/issues/43
DoR3M3 said:
LOL, you always give me a funny face...
Anyhow, as I was looking around I found a issue on the Mi A1 that the developer is working on, in case you'd like to follow it, or anyone else interested in this for the Mi A1.
https://gitlab.com/fdroid/privileged-extension/issues/43
Click to expand...
Click to collapse
Never used it but yea I'll check it out for sure cuz I've been hearing about fdroid alot
apexashwin said:
Never used it but yea I'll check it out for sure cuz I've been hearing about fdroid alot
Click to expand...
Click to collapse
Well, it's the App to use, there's also YalpStore.
This is about MicroG/FakeGapps, using a rom with No Gapps, no Google Play Store, etc...
It's taken me a little time, but I've figured out how to do a nice clean Custom Rom install with NoGapps, and use MicroG.
DoR3M3 said:
Well, it's the App to use, there's also YalpStore.
This is about MicroG/FakeGapps, using a rom with No Gapps, no Google Play Store, etc...
It's taken me a little time, but I've figured out how to do a nice clean Custom Rom install with NoGapps, and use MicroG.
Click to expand...
Click to collapse
I really wanna use my phone Google free but iam afraid cuz most apps i use check for licence and it requires Google play. . wish i can do something about this

magisk hide doesn't work

Hi,
After upgrading to latest Magisk v18. 1 does any faces issue using Google pay. Am getting error saying ur device is rooted etc. Till v18 was able to use without any problem. Any help is appreciated
mapbond said:
Hi,
After upgrading to latest Magisk v18. 1 does any faces issue using Google pay. Am getting error saying ur device is rooted etc. Till v18 was able to use without any problem. Any help is appreciated
Click to expand...
Click to collapse
Did you tried searching the magisk forum? There are several recommendations about such issues like this one https://forum.xda-developers.com/ap...v1-universal-systemless-t3432382/post78796313
strongst said:
Did you tried searching the magisk forum? There are several recommendations about such issues like this one https://forum.xda-developers.com/ap...v1-universal-systemless-t3432382/post78796313
Click to expand...
Click to collapse
Yep installed it beforehand but still faces same issue.
Sent from my OnePlus 5 using XDA Labs
No luck
Sent from my OnePlus 5 using XDA Labs
mapbond said:
No luck
Click to expand...
Click to collapse
Just use 18.0 instead, but make sure you head over to magisk forum and make aware of this specific 18.1 issue.
mapbond said:
No luck
Sent from my OnePlus 5 using XDA Labs
Click to expand...
Click to collapse
I can't see BusyBox in your screenshot, but BusyBox is a prerequisite for MagiskHide Props Config.
tobby88 said:
I can't see BusyBox in your screenshot, but BusyBox is a prerequisite for MagiskHide Props Config.
Click to expand...
Click to collapse
Yes i took screenshot before installing busybox. But it's installed n i tried props in terminal emulator
Sent from my OnePlus 5 using XDA Labs
mapbond said:
Yes i took screenshot before installing busybox. But it's installed n i tried props in terminal emulator
Click to expand...
Click to collapse
Why you don't post your question in the appropriate magisk forum or thread to receive more specific answers at least from didgeridoohan https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
Try to wipe system and flash ur current setup again with the latest Magisk. I'm sometimes getting strange issues but that always helps
mapbond said:
Hi,
After upgrading to latest Magisk v18. 1 does any faces issue using Google pay. Am getting error saying ur device is rooted etc. Till v18 was able to use without any problem. Any help is appreciated
Click to expand...
Click to collapse
I had magisk 15.4 and everything worked properly for a long time. But suddenly Google Pay refused make payments because of modified system. I've upgraded Magisk to 18.1. I've checked SafeNet test in Magisk and was passed OK. Separate app for SafeNet tests was OK too, but Google Pay still refused to work. Then I discovered the Google Play shows my device as uncertified. I found the answer which resoled both problems at one time:
Clear the data/cache of the Play Store and Google Play Services.
radeks11 said:
I had magisk 15.4 and everything worked properly for a long time. But suddenly Google Pay refused make payments because of modified system. I've upgraded Magisk to 18.1. I've checked SafeNet test in Magisk and was passed OK. Separate app for SafeNet tests was OK too, but Google Pay still refused to work. Then I discovered the Google Play shows my device as uncertified. I found the answer which resoled both problems at one time:
Clear the data/cache of the Play Store and Google Play Services.
Click to expand...
Click to collapse
My play store show my device certified but google pay doesn't work n much other coz of magisk hide doesn't work in 18.1 so i downgraded to 18.0 n it's working fine.
Sent from my OnePlus 5 using XDA Labs
mapbond said:
My play store show my device certified but google pay doesn't work n much other coz of magisk hide doesn't work in 18.1 so i downgraded to 18.0 n it's working fine.
Sent from my OnePlus 5 using XDA Labs
Click to expand...
Click to collapse
Did you do anything else besides just downgrading Magisk? I tried it, and it didn't work for me.
Also tried clearing storage and cache of Play Services, Google Pay, and Play Store
Also a dedicated discussion thread for Google pay where you can discuss your thoughts and issues https://forum.xda-developers.com/apps/magisk/discussion-google-pay-magisk-discussion-t3906703
halferuga said:
Did you do anything else besides just downgrading Magisk? I tried it, and it didn't work for me.
Also tried clearing storage and cache of Play Services, Google Pay, and Play Store
Click to expand...
Click to collapse
I best option i find is downgrade
Sent from my OnePlus 5 using XDA Labs

Categories

Resources