How to root Huawei Y3II LUA-U22? - Huawei Y3 Questions & Answers

I have tried several methods, like ADB, Kingoroot for PC, but no help. I have forgotten the exact error message but it was likely that I got an error saying TWRP image is bigger in size. I had unlocked the bootloader too. My model is Huawei Y3II LUA-U22, the 3G one. I want to start it over. Can someone help?

​
Can YOU please Share the process, how could you own unlock boot loader ?? Please share

follow the instructions
Adnan_Abir said:
​
Can YOU please Share the process, how could you own unlock boot loader ?? Please share
Click to expand...
Click to collapse
If you want to unlock bootloader, pm me.
I did it successfully last night.

unlock bootloader huawei lua y22
Hi, can you ssend on my mail instruction for unlock bootloader on huawei lua-u22. My mail [email protected]. Thank you!

Did anyone figure out how to put a apk on exalt lte?

mat-sukaze said:
follow the instructions
If you want to unlock bootloader, pm me.
I did it successfully last night.
Click to expand...
Click to collapse
How?

Related

[GUIDE]European model Bootloader unlock and root

Here is the translated guide to unlock bootloader on European model from the link I posted earlier.
I’m not responsible of any damage made to your device.
Download, unzip and run the Huawei product ID generator then select Huawei Y300-0000 in the product model field. Paste your IMEI in the product IMEI field and it should give you a product ID. We will use it later.
Go to http://en.club.vmall.com/emotiondownload.php?mod=unlock&action=apply tick the box at the end of the Unlocking Agreement and click next.
Here is what to choose/write in the form:
Product type: Smartphone
Product model: Huawei Y300-0000
Product SN: The SN of your Mate 7
Product IMEI/MEID: The IMEI of your Mate 7
Product ID: The number Product ID Generator gave you.
Enter the captcha and click submit.
Now it should give you your unlock code.
Download mate7.zip from https://mega.co.nz/#!aB8mRATA!nY7VJPUEESxBv5iRZ95vORbcjUQwLoyEyHagPi6RMGI and unzip it.
Install the driver if needed by running Driver\all\DriverSetup.exe
Copy SuperSU-PRO-V2.09.zip to your sd card.
Reboot your Mate in fastboot by holding Volume Down+Power for 10 seconds and plug it.
Unzip Recovery_b119.zip, go to tools, hold Shift and right click then choose “Open command windows here.
Type:
Code:
Oem unlock fastboot [your unlock code]
Now your bootloader is unlocked. Don’t close the command windows, now we will install the ClockWorkMod recovery.
In the window type:
Code:
Fastboot flash recovery recovery_h60.img
You can flash recovery_stock.img with the same command if you want to revert back to the stock recovery.
Now go into recovery by holding Volume Up+Power for 10 seconds.
Then go to:
Install zip>choose zip from /storage/sdcard1> SuperSU-PRO-V2.09.zip and select yes.
Reboot.
Your Mate 7 is now unlocked and rooted!
Uryldor said:
Here is the translated guide to unlock bootloader on European model from the link I posted earlier.
I’m not responsible of any damage made to your device.
Download, unzip and run the Huawei product ID generator then select Huawei Y300-0000 in the product model field. Paste your IMEI in the product IMEI field and it should give you a product ID. We will use it later.
Go to http : //en.club.vmall.com/emotiondownload.php?mod=unlock&action=apply (can’t post link at the moment), tick the box at the end of the Unlocking Agreement and click next.
Here is what to choose/write in the form:
Product type: Smartphone
Product model: Huawei Y300-0000
Product SN: The SN of your Mate 7
Product IMEI/MEID: The IMEI of your Mate 7
Product ID: The number Product ID Generator gave you.
Enter the captcha and click submit.
Now it should give you your unlock code.
Download mate7.zip from https : //mega.co.nz/#!aB8mRATA!nY7VJPUEESxBv5iRZ95vORbcjUQwLoyEyHagPi6RMGI and unzip it.
Install the driver if needed by running Driver\all\DriverSetup.exe
Copy SuperSU-PRO-V2.09.zip to your sd card.
Reboot your Mate in fastboot by holding Volume Down+Power for 10 seconds and plug it.
Unzip Recovery_b119.zip, go to tools, hold Shift and right click then choose “Open command windows here.
Type:
Code:
Oem unlock fastboot [your unlock code]
Now your bootloader is unlocked. Don’t close the command windows, now we will install the ClockWorkMod recovery.
In the window type:
Code:
Fastboot flash recovery recovery_h60.img
You can flash recovery_stock.img with the same command if you want to revert back to the stock recovery.
Now go into recovery by holding Volume Up+Power for 10 seconds.
Then go to:
Install zip>choose zip from /storage/sdcard1> SuperSU-PRO-V2.09.zip and select yes.
Reboot.
Your Mate 7 is now unlocked and rooted!
Click to expand...
Click to collapse
Great, thanks a lot.
You're welcome! I'm happy that this guide can help someone.
Uryldor said:
You're welcome! I'm happy that this guide can help someone.
Click to expand...
Click to collapse
Great, thanks. Two questions though.
1. Does this void warranty?
2. Will OTA's still work?
1. If you unlock bootloader and flash back stock recovery, no...
2. No OTA with cwm-recovery...
... send from hell... hahahaaaa...
Thanks for this. There is a small error in the first command however. The first command for unlock should be "fastboot oem unlock [your unlock code]" The other instructions are fine.
it asks me for ID not working..
edit finally got it !!
---------- Post added at 10:28 PM ---------- Previous post was at 10:24 PM ----------
boober78 said:
Great, thanks. Two questions though.
1. Does this void warranty?
2. Will OTA's still work?
Click to expand...
Click to collapse
once u done rootig and flashing all good flash stock recovery back .. u dont need it .. bcos no custom roms..
thank you m8 very much,it works
Uryldor said:
Here is the translated guide to unlock bootloader on European model from the link I posted earlier.
Click to expand...
Click to collapse
Change that first command .. it is wrong way round .. ! people gets confused..
from
Oem unlock fastboot [your unlock code]
to
fastboot oem unlock [your unlock code]
like abbas told you ..
help
I don't understand superSU.zip can i ,install from google superSu pro?
And how to fix hisuite not connect when i turn on deplugin ?
Plzz help me
Guide is full of faults, please correct them or delete your thread.
Please Root Mate 7 TL-09
Hi
Not Link Root How to send email not support Model MT7
Now What I Do Is Very Necessary please:laugh:
is it possible to get root but keep OTA updates
Product model
I have entered the correct things, but the website says wrong product model
Please help
Defender666 said:
is it possible to get root but keep OTA updates
Click to expand...
Click to collapse
From what I have read, Unlock bootloader, install CWM, root, then install stock recovery and OTA will still work.
Hope thats right, my M7 is still on its way to me!
Why so much stress, but the flash. News and Root.
http://forum.xda-developers.com/mat...v1-0-0-mt7-l09-b137sp03-t3044695?goto=newpost
Hi all,
followed the guide (with some adjustments) and I got everything working.
CM and rooting.
Now I have a question : I still have OTA asking me to update (before rooting the update was already present and I even started the download, like up to 10%). Is it safe to do it? will the update leave the phone rooted or not?
thanks!
alareth1976 said:
Hi all,
followed the guide (with some adjustments) and I got everything working.
CM and rooting.
Now I have a question : I still have OTA asking me to update (before rooting the update was already present and I even started the download, like up to 10%). Is it safe to do it? will the update leave the phone rooted or not?
thanks!
Click to expand...
Click to collapse
If you have custom recovery installed, you need to re-install stock recovery first, otherwise the update.zip file doesn' t install. After installation of the update well...depends...someone is stating that root still remains, other not...
Personally I lost the root, but followed the procedure and obtained the root again. Simple.
I have a MT7-L09 with 130 firmware. Did all the instructions in the tutorial, but Im always getting the message "We regret to say that the information you are searching is not found. Pleae mail to [email protected], We'll respond to you as soon as possible, thanks." I have wrote to Huawei, in short email they explained this model is not supported for unlocking directly from them and advise me to search other methods on my own risk. Please any help or advise what should I do to unlock the bootloader, ROOT and install CWM?
vsdmch said:
I have a MT7-L09 with 130 firmware. Did all the instructions in the tutorial, but Im always getting the message "We regret to say that the information you are searching is not found. Pleae mail to [email protected], We'll respond to you as soon as possible, thanks." I have wrote to Huawei, in short email they explained this model is not supported for unlocking directly from them and advise me to search other methods on my own risk. Please any help or advise what should I do to unlock the bootloader, ROOT and install CWM?[/Q]
Look at here dude, it' s your Bible...
http://mate7.net/ascend-mate7-bootloader-unlock/
Happe Easter to all of you.
Click to expand...
Click to collapse

Yoga 2 How to install TWRP and unlock Bootloader on Lollipop?

Hello
I had a problem with the update for yoga 2 so I installed kitkat and then updated it to a lollipop. Now I have Ver. S100255.
Now my question is how to install the recovery twrp permanently?
Do I need to unlock the bootloader? If so, how?
Please help!
Can somebody/anybody help me? Please
I would like to know that, too
or in other words: give it tested custom recoverys for the Yoga 2 ???
I can go into the fastboot mode
but I'm looking for a compatible Recovery
Is there a?
There is this http://forum.xda-developers.com/thi...oga-tab-2-830-1050-1380-twrp-2-8-7-0-t3296208
But I don't now how to do this.
I think you need unlock bootloader but I can't find a instruction.
If somebody knows how to install on lollipop recovery twrp, unlock bootloader and then root device please write a instruction step by step.
misio56 said:
There is this http://forum.xda-developers.com/thi...oga-tab-2-830-1050-1380-twrp-2-8-7-0-t3296208
But I don't now how to do this.
I think you need unlock bootloader but I can't find a instruction.
If somebody knows how to install on lollipop recovery twrp, unlock bootloader and then root device please write a instruction step by step.
Click to expand...
Click to collapse
i can't flash the 1380f img with 'fastboot flash' on my 1380F
it remains at ' fastboot cmd waiting ... ' and it does nothing...
This is for Yoga 3 http://forum.xda-developers.com/thi...a-tab-3-pro-root-thread-instructions-t3319666
but I think you can do this for yoga 2 using file from yoga 2 http://forum.xda-developers.com/thi...oga-tab-2-830-1050-1380-twrp-2-8-7-0-t3296208
In this topic for yoga 3 they write you need to unlock first but I don' t now how.
Hello, I've pieced together all of the steps needed for bootloader unlock and permanent TWRP, based on all the info I found in this forum.
Here's a link: https://forum.xda-developers.com/thinkpad-tablet/general/lenovo-yoga-tab-2-830f-bootloader-t3593123

Please help me build twrp on oppo a37f

Oppo a37 does not have a fastboot option first i need help about enabling it. .... someone on forum said they removed it so is there any way to flash fastboot in oppo.. ?
I also need someone to help me build twrp for oppo a37 .......I'll provide all the necessary files.. ....
if someone already unlocked bootloader or has twrp for oppo a37(neo 9) then please reply here.. .
i have rooted it with latest kingroot app
Hey i rooted with kingroot and i ported twrp3.0.2 .But twrp touch not working. You can replace super su with twrp by twrp manager.
KoSett said:
Hey i rooted with kingroot and i ported twrp3.0.2 .But twrp touch not working. You can replace super su with twrp by twrp manager.
Click to expand...
Click to collapse
if touchscreen is not working, unpack recovery and see if it has the modules inside, put them on Twrp if its not there, use stock boot.img and copy all the modules to twrp and it should have touchscreen working, its just a little help since i did this to my device and it started working.
Ruben Craveiro said:
if touchscreen is not working, unpack recovery and see if it has the modules inside, put them on Twrp if its not there, use stock boot.img and copy all the modules to twrp and it should have touchscreen working, its just a little help since i did this to my device and it started working.
Click to expand...
Click to collapse
The twrp @KoSett ported when i flash it then it does not work .... phone reboot to normal .... recovery doesn't work at all.... can you tell me what is the problem here
hamzachaudhry36 said:
The twrp @KoSett ported when i flash it then it does not work .... phone reboot to normal .... recovery doesn't work at all.... can you tell me what is the problem here
Click to expand...
Click to collapse
is bootloader unlocked?
Ruben Craveiro said:
is bootloader unlocked?
Click to expand...
Click to collapse
no sir ... the thing is oppo a37f does not have fastboot binarys and also bootloader is locked .....
hamzachaudhry36 said:
no sir ... the thing is oppo a37f does not have fastboot binarys and also bootloader is locked .....
Click to expand...
Click to collapse
all devices have fastboot.. reboot to bootloader and try to unlock bootloader after you on debug settings enable oem unlocking, on bootloader it acts like fastboot..
Ruben Craveiro said:
all devices have fastboot.. reboot to bootloader and try to unlock bootloader after you on debug settings enable oem unlocking, on bootloader it acts like fastboot..
Click to expand...
Click to collapse
I tried oem unlocking.
when reboot to bootloader through flashify it reboots normally.
when using PC and adb the command to reboot to bootloader/fastboot boots device normally.
Please check this thread : http://forum.xda-developers.com/r7-plus/help/decision-oppo-bootloader-fastboot-t3348114
Ruben Craveiro said:
all devices have fastboot.. reboot to bootloader and try to unlock bootloader after you on debug settings enable oem unlocking, on bootloader it acts like fastboot..
Click to expand...
Click to collapse
Also can you help me port Xiaomi Redmi 2 twrp for my Oppo a37f ? I will provide all the required files PLEASE!
hamzachaudhry36 said:
Also can you help me port Xiaomi Redmi 2 twrp for my Oppo a37f ? I will provide all the required files PLEASE!
Click to expand...
Click to collapse
if bootloader is locked, the bootloader wont allow twrp to boot since its an unofficial unsigned image (not signed by the OEM)
Ruben Craveiro said:
if bootloader is locked, the bootloader wont allow twrp to boot since its an unofficial unsigned image (not signed by the OEM)
Click to expand...
Click to collapse
Two Questions :
1)Is there a way out of this? (Can bootloader be unlocked somehow)
2)How did @KoSett succeeded in installing twrp in his oppo a37f with locked bootloader
hamzachaudhry36 said:
Two Questions :
1)Is there a way out of this? (Can bootloader be unlocked somehow)
2)How did @KoSett succeeded in installing twrp in his oppo a37f with locked bootloader
Click to expand...
Click to collapse
1- i read something about a project from the thread link you showed me that it restores bootloader functions
2- he problably used that method or still uses old software versions where the patch to remove bootloader hasnt been made yet..
Ruben Craveiro said:
1- i read something about a project from the thread link you showed me that it restores bootloader functions
2- he problably used that method or still uses old software versions where the patch to remove bootloader hasnt been made yet..
Click to expand...
Click to collapse
Its project spectrum rom instead of colorOS rom, but it is not compatible for oppo a37f
and i think he is using the same software but still i'll ask him for his version of OS.....
It's all my fault i didn't go through details of phone before buying....
So the final thing is i am stuck with a phone without fastboot and locked bootloader and can't install TWRP... It sucks!
hamzachaudhry36 said:
Its project spectrum rom instead of colorOS rom, but it is not compatible for oppo a37f
and i think he is using the same software but still i'll ask him for his version of OS.....
It's all my fault i didn't go through details of phone before buying....
So the final thing is i am stuck with a phone without fastboot and locked bootloader and can't install TWRP... It sucks!
Click to expand...
Click to collapse
And is there a way that i can get his Binarys for my phone or his whole rom 'cuz on the internet there is only latest rom (afterall our phones are the same)
hamzachaudhry36 said:
And is there a way that i can get his Binarys for my phone or his whole rom 'cuz on the internet there is only latest rom (afterall our phones are the same)
Click to expand...
Click to collapse
i dont think so.
Hey bro, We will get twrp officially at tomorrow.And Unlocked bootloader with miui8 rom.
Thank .I will made new thread wait 8hrs.Thz.
Whats the progress now?
KoSett said:
Hey bro, We will get twrp officially at tomorrow.And Unlocked bootloader with miui8 rom.
Thank .I will made new thread wait 8hrs.Thz.
Click to expand...
Click to collapse
It's tomorrow now, how's progress going?
I have submitted my source code to twrp official.. They will send direct link to test build soon be ready.
Hey, Use oppo tool with unlock bootloader then flash recovery image.

OEM unlock

I have the Chinese version of axon 7 and under development options I can click on OEM unlock then it asks for a pin number. How do I get that pin number?
Have you contacted zte customer service?
Please let me know how this turns out
I've been around these forums multiple times now and the ways that should work don't seem to work for me :/ Can't find a confirmed unlock of the Chinese version and am stuck on B13 while I wany Cyanogen.
If you go and sign up for ztes website and then go to the developers lounge there is a lot of talk about bootloader unlock. The way I read it you could have signed up to receive a pin number to unlock bootloader but zte has put that on hold? But are suppose to start it back up?
you can flash unlock bootloader in port 9008, I unlocked successfully by this way
@jiabing520a could you explain how?
after booting into recovery my device isnt visible in the device list from adb.
enkrs said:
@jiabing520a could you explain how?
after booting into recovery my device isnt visible in the device list from adb.
Click to expand...
Click to collapse
Did you flash twrp ? Official recovery does not support adb.
If you have already flashed twrp, then open computer manager- device manager, you will see your phone doesn‘t work correctly (triangle) , right click on the triangle, and click update driver, then computer will fix this proble automatically.
Can not even get to flashing the TWRP, so stock recovery.
I want to backup the recovery.img in case i brick the device after doing
adb reboot recovery the device cant be found any more in the adb device list so nothing from that.
I tried to sideload it using the adb sideload but the same
it`s saying waiting for device and stays there even when i`m trying to send a file to the device.
Ok little update.
tried to downgrade but getting the error footer not correct and unable to verify.
Normaly saying you can disable this using the TWRP system as i cannot even get the bootloader to unlock.
So i cant get TWRP installed on the device.
If anyone knows how to downgrade the b13 to the b10 so we can use the tools provided in other posts
Please help how further .
enkrs said:
Can not even get to flashing the TWRP, so stock recovery.
I want to backup the recovery.img in case i brick the device after doing
adb reboot recovery the device cant be found any more in the adb device list so nothing from that.
I tried to sideload it using the adb sideload but the same
it`s saying waiting for device and stays there even when i`m trying to send a file to the device.
Click to expand...
Click to collapse
waiting for device...you should kill adb process first, and then reconnect your pc
---------- Post added at 11:33 ---------- Previous post was at 11:32 ----------
enkrs said:
Ok little update.
tried to downgrade but getting the error footer not correct and unable to verify.
Normaly saying you can disable this using the TWRP system as i cannot even get the bootloader to unlock.
So i cant get TWRP installed on the device.
If anyone knows how to downgrade the b13 to the b10 so we can use the tools provided in other posts
Please help how further .
Click to expand...
Click to collapse
if you want to downgrade the b13 to the b10,maybe you should use official recovery
If you can explain how to downgrade using the original recovery please i have tried sideloading
and placing the rom file in the location reserved for update etc.
enkrs said:
If you can explain how to downgrade using the original recovery please i have tried sideloading
and placing the rom file in the location reserved for update etc.
Click to expand...
Click to collapse
Hello Mate,
I am in the same situation as you. I have been looking all over the internet and came across a Chinese forum. Apparently, it is possible to unlock and root B13. However, I have used Google translater to translate the page. It's hard to understand the steps. I have not tested it. But maybe someone out there will have a better understanding and could give it a go. Here is the link
http://www.myzte.cn/forum.php?mod=viewthread&tid=320458&mobile=2
Hope that helps

Troubles unlocking bootloader + TWRP info

Good evening everybody, I've been away from android modding for few years and probably got rusty.
Today I've purchased the Asus Zenfone Max M1 (X00PD).
I've completed the installation of the adb-setup (1.3 version), let my pc (Windows 10 64 bit) recognize the device both on and in fastboot mode.
I've also enabled debug mode and installed the specific drivers, as many guides indicate.
When I connect my smartphone in fastboot mode and try to unlock the bootloader by clicking on the "unlock.cmd" a windows appear for a brief moment and then disappear, can't really know if if was a success or no.
When i try to flash TWRP 3.3.1-X00P i get the "partition flashing is not allowed", after searching it seems that my bootloader is still locked.
The fastboot oem unlock gives "oem unlock is not unlocked".
Am I missing something? And if i figure how to finally unlock the bootloader, is the X00P recovery good for my X00PD device? Can't find a proper X00PD recovery apperently.
Thanks in advance for any answer.
UPDATE: apperently the guide I was following to unlock the bootloader was for the PRO version, google was very sneaky with me.
I installed an APK directly on my smartphone, executed it and my bootloader was unlocked. flashing the twrp with the usual procedure was a piece of cake
Dharmost said:
Good evening everybody, I've been away from android modding for few years and probably got rusty.
Today I've purchased the Asus Zenfone Max M1 (X00PD).
I've completed the installation of the adb-setup (1.3 version), let my pc (Windows 10 64 bit) recognize the device both on and in fastboot mode.
I've also enabled debug mode and installed the specific drivers, as many guides indicate.
When I connect my smartphone in fastboot mode and try to unlock the bootloader by clicking on the "unlock.cmd" a windows appear for a brief moment and then disappear, can't really know if if was a success or no.
When i try to flash TWRP 3.3.1-X00P i get the "partition flashing is not allowed", after searching it seems that my bootloader is still locked.
The fastboot oem unlock gives "oem unlock is not unlocked".
Am I missing something? And if i figure how to finally unlock the bootloader, is the X00P recovery good for my X00PD device? Can't find a proper X00PD recovery apperently.
Thanks in advance for any answer.
Click to expand...
Click to collapse
You downloaded Max Pro M1 tools to unlock that's why not worked
raza231198 said:
You downloaded Max Pro M1 tools to unlock that's why not worked
Click to expand...
Click to collapse
Yes, it was my mistake. Have to say in my defense that i've searched for the regular M1 version on google and it's shown me PRO related results, the PRO word was mentioned once in a very long title that my mind skipped on it.
Hope somebody with the same issue can find this thread in the future and figure out what went wrong. Thanks again for the assistence!
Apk for unlocking bootloader.
Dude could you please share the app you used to unlock the bootloader of x00p.
itsdrnoob said:
Dude could you please share the app you used to unlock the bootloader of x00p.
Click to expand...
Click to collapse
I'd like to but I don't have the link anymore, you should join the telegram group (can find the details in some sticked thread)
App link from official asus website
itsdrnoob said:
Dude could you please share the app you used to unlock the bootloader of x00p.
Click to expand...
Click to collapse
Asus zenfone Max M1 unlock tool
Link: https: //dlcdnets.asus.com/pub/ASUS/ZenFone/ZB555KL/ZB555_signed_UnlockTool_9.1.0.11_190708_fulldpi.apk
Just copy and delete the space between https: and //dlcd.......
Because I'm new here, so i cant post links
ABU 10 ROCKZ said:
Asus zenfone Max M1 unlock tool
Link: https: //dlcdnets.asus.com/pub/ASUS/ZenFone/ZB555KL/ZB555_signed_UnlockTool_9.1.0.11_190708_fulldpi.apk
Just copy and delete the space between https: and //dlcd.......
Because I'm new here, so i cant post links
Click to expand...
Click to collapse
Hi.
I see that You can find the unlocking tool on a not-existent page, that's why I'll ask: Do You know address where i can find the unlocking tool for the ZB570TL model X018D version? My wersion of this app (9.1.0.3_18.06.21_fulldpi_signed) does not unlocking the bootloader. Fastboot command too. I will be grateful for You help
Dharmost said:
UPDATE: apperently the guide I was following to unlock the bootloader was for the PRO version, google was very sneaky with me.
I installed an APK directly on my smartphone, executed it and my bootloader was unlocked. flashing the twrp with the usual procedure was a piece of cake
Click to expand...
Click to collapse
Dude nooo...
You could have used the unofficial method. Well your warranty is gone now and you might have lesser chances of relocking your bootloader but i guess you already knew it was a risk since you wanted to unlock the bootloader.
Dharmost said:
UPDATE: apperently the guide I was following to unlock the bootloader was for the PRO version, google was very sneaky with me.
I installed an APK directly on my smartphone, executed it and my bootloader was unlocked. flashing the twrp with the usual procedure was a piece of cake
Click to expand...
Click to collapse
hi bro.are you successful flashing the twrp file on your X00PD?Can you provide the link.thank you
hi.
so did you not use the "TWRP 3.3.1-X00P"? which file did you use?
Fredin_ said:
Dude nooo...
You could have used the unofficial method. Well your warranty is gone now and you might have lesser chances of relocking your bootloader but i guess you already knew it was a risk since you wanted to unlock the bootloader.
Click to expand...
Click to collapse
There is no unofficial way for Max 1
Max 1 Pro has it's own way but it's not working on the M1?!
como faz twrp no X00PD?

Categories

Resources