Alright, so I had just installed TWRP and Magisk, made backups of my ROM and EFS, everything is going well. I go to install LuisROM.
I go into TWRP, click install, and click on the LuisROM package. Says it doesn't find a digest file, but installation is continuing, so I figure it's no big deal. Reboot, and I get the Unlocked Bootloader warning that I've just recently began to familiarize myself with, but at the bottom of the screen, say the bottom half inch or so, is crazy static. Completely jumbled nonsense. It's not animated or anything, just randomly colored static pixels. Odd.
Next screen? Black. Nothing. Plugged into the computer and the she makes the familiar beeps that a device has been plugged in. For a time I find myself stuck in a boot loop trying to get back into recovery via power + vol down, but nothing. Seems to instant reboot back into the warning then black screen.
Now: I can't even seem to turn the phone off! If I plug into the laptop, I hear the familiar sounds, but can't do anything about it that I know of. If I hold the power button for 30-60 seconds: nothing.
I saw a few posts on here saying something about a complete power drain and recharge, so that's my next best guess, but I'm hoping someone else has a better idea.
lynxon said:
Alright, so I had just installed TWRP and Magisk, made backups of my ROM and EFS, everything is going well. I go to install LuisROM.
I go into TWRP, click install, and click on the LuisROM package. Says it doesn't find a digest file, but installation is continuing, so I figure it's no big deal. Reboot, and I get the Unlocked Bootloader warning that I've just recently began to familiarize myself with, but at the bottom of the screen, say the bottom half inch or so, is crazy static. Completely jumbled nonsense. It's not animated or anything, just randomly colored static pixels. Odd.
Next screen? Black. Nothing. Plugged into the computer and the she makes the familiar beeps that a device has been plugged in. For a time I find myself stuck in a boot loop trying to get back into recovery via power + vol down, but nothing. Seems to instant reboot back into the warning then black screen.
Now: I can't even seem to turn the phone off! If I plug into the laptop, I hear the familiar sounds, but can't do anything about it that I know of. If I hold the power button for 30-60 seconds: nothing.
I saw a few posts on here saying something about a complete power drain and recharge, so that's my next best guess, but I'm hoping someone else has a better idea.
Click to expand...
Click to collapse
Can you reboot to EDL Mode? Plug in your phone. And hold the power and Volume Up button till it turns off. As soon as the Screen Goes black, let go of Power and Hold both the Volume Buttons. You will hear the Windows Connection Sound from your PC but phone screen will be back. After that, follow the instructions from the MSM Download Tool thread. It's in the Guides Section or you can Google 'MSM Download Tool OP6T"
DarthVader said:
Can you reboot to EDL Mode? Plug in your phone. And hold the power and Volume Up button till it turns off. As soon as the Screen Goes black, let go of Power and Hold both the Volume Buttons. You will hear the Windows Connection Sound from your PC but phone screen will be back. After that, follow the instructions from the MSM Download Tool thread. It's in the Guides Section or you can Google 'MSM Download Tool OP6T"
Click to expand...
Click to collapse
The phone is currently stuck in a state where the screen is black, but is stuck powered on. I cannot seem to power down manually.
That being said, after going to the thread you've directed me to, it does appear in the device manager under the name indicated by the thread! I will report back once I've tried all I can with this lead, thank you very much.
lynxon said:
The phone is currently stuck in a state where the screen is black, but is stuck powered on. I cannot seem to power down manually.
That being said, after going to the thread you've directed me to, it does appear in the device manager under the name indicated by the thread! I will report back once I've tried all I can with this lead, thank you very much.
Click to expand...
Click to collapse
Good Luck.
Alright, so right now I'm getting "Sahara Communication Failed, please try again after power off phone."
So, I guess I'm back to waiting for the phone to run out of battery on its own. I'll try the MSM Download Tool again once that time comes :good:
lynxon said:
Alright, so right now I'm getting "Sahara Communication Failed, please try again after power off phone."
So, I guess I'm back to waiting for the phone to run out of battery on its own. I'll try the MSM Download Tool again once that time comes :good:
Click to expand...
Click to collapse
I think you're forgetting the 3-button-magic of your device. Press power + vol-up + vol-down simultaneously for 10 seconds to make it power down.
Wrapped with delicious Fajita [emoji896]
Timmmmaaahh said:
I think you're forgetting the 3-button-magic of your device. Press power + vol-up + vol-down simultaneously for 10 seconds to make it power down.
Click to expand...
Click to collapse
I did actually try that as well, to no avail.
DarthVader said:
Can you reboot to EDL Mode? Plug in your phone. And hold the power and Volume Up button till it turns off. As soon as the Screen Goes black, let go of Power and Hold both the Volume Buttons. You will hear the Windows Connection Sound from your PC but phone screen will be back. After that, follow the instructions from the MSM Download Tool thread. It's in the Guides Section or you can Google 'MSM Download Tool OP6T"
Click to expand...
Click to collapse
Good news is that this time the MSM Download Tool could recognize the phone, however I received "Images do not match with the phone." I had to download 9.0.12. as it seems that 9.0.13. actually got removed from that server as I was in the middle of downloading it. I found another source for 9.0.13. and am downloading that now. Hopefully that's the correct version...
lynxon said:
I did actually try that as well, to no avail.
Good news is that this time the MSM Download Tool could recognize the phone, however I received "Images do not match with the phone." I had to download 9.0.12. as it seems that 9.0.13. actually got removed from that server as I was in the middle of downloading it. I found another source for 9.0.13. and am downloading that now. Hopefully that's the correct version...
Click to expand...
Click to collapse
Is your phone a T-Mobile Converted
DarthVader said:
Good Luck.
Click to expand...
Click to collapse
And the phone is alive again! Hallelujah! I had to use the T-Mobile version of the MSM Download Tool, which is funny because I had bought the phone used and there was no T-Mobile screen at boot before, but there is now, but she is alive!!!
Thank you again for your help. You're doing great work since returning to the light side, Vader
lynxon said:
And the phone is alive again! Hallelujah! I had to use the T-Mobile version of the MSM Download Tool, which is funny because I had bought the phone used and there was no T-Mobile screen at boot before, but there is now, but she is alive!!!
Thank you again for your help. You're doing great work since returning to the light side, Vader
Click to expand...
Click to collapse
Glad to know you're back up. You bought it off eBay I assume? That would explain the no TMo Splash Screen earlier. Now if you'd like to revert to International again, there is a Guide you can use to convert your TMo into International and then update to latest 10.3 or Flash a Custom ROM as you please. It's in the Guides Section.
May the Force be with You.
DarthVader said:
Glad to know you're back up. You bought it off eBay I assume? That would explain the no TMo Splash Screen earlier. Now if you'd like to revert to International again, there is a Guide you can use to convert your TMo into International and then update to latest 10.3 or Flash a Custom ROM as you please. It's in the Guides Section.
May the Force be with You.
Click to expand...
Click to collapse
Yes! Back up and then immediately down... So, I followed the procedure to remove the T-Mobile info and that worked well, back to stock OxygenOS 9.0.13. Followed the directions here for unlocking the bootloader, running TWRP and Magisk. All good.
Last time I flashed with RR and crashed. This time I flashed with LineageOS 17 and... Exact same crash. Static on the bottom of the screen, bootloop and all. So, now I'm stuck waiting again for the battery to die down before I can reflash to T-Mobile, then to international, then unlock the bootloader.
Any idea what I can do differently this time so I can have a custom ROM?
Not eBay, but I was using OfferUp and found a local shop selling it so I was able to sidestep the middleman.
lynxon said:
Yes! Back up and then immediately down... So, I followed the procedure to remove the T-Mobile info and that worked well, back to stock OxygenOS 9.0.13. Followed the directions here for unlocking the bootloader, running TWRP and Magisk. All good.
Last time I flashed with RR and crashed. This time I flashed with LineageOS 17 and... Exact same crash. Static on the bottom of the screen, bootloop and all. So, now I'm stuck waiting again for the battery to die down before I can reflash to T-Mobile, then to international, then unlock the bootloader.
Any idea what I can do differently this time so I can have a custom ROM?
Not eBay, but I was using OfferUp and found a local shop selling it so I was able to sidestep the middleman.
Click to expand...
Click to collapse
Could you perhaps provide an image of Said Crash? And a couple more things. Which ROM were you trying to Flash. What was your OOS version before trying to Flash the ROM. And what TWRP did you use? Because this sounds like a Crash Dump which is common if you use the wrong Vendor Firmware.
DarthVader said:
Could you perhaps provide an image of Said Crash? And a couple more things. Which ROM were you trying to Flash. What was your OOS version before trying to Flash the ROM. And what TWRP did you use? Because this sounds like a Crash Dump which is common if you use the wrong Vendor Firmware.
Click to expand...
Click to collapse
Well, hopefully I won't crash again as I have to wait a day for the battery to train to fix the crash haha. It happened so far with RR and LineageOS. OxygenOS 9.0.13. And...
Woah. Just now seeing that my TWRP Zip file is 3.2.3-2 and Img file is 3.3.1-1. Perhaps that is the culprit?
EDIT: Nope! Just tried with TWRP 33.1-1, LineageOS 16 official build as of 1/11/2020. Included is a photo of the boot warning page, and apparently I can fastboot right now as well, but there's no particular information on either page that I can imagine is useful.
Boot warning
Fast boot
This time I also tried wiping the Dalvik. I also notice that on the bootloader unlocking directions it says to not update with partial OTAs (under 1GB) as this can cause a soft-brick. All of the ROMs I've been trying to flash are about 500mb. Is this the problem?
lynxon said:
Well, hopefully I won't crash again as I have to wait a day for the battery to train to fix the crash haha. It happened so far with RR and LineageOS. OxygenOS 9.0.13. And...
Woah. Just now seeing that my TWRP Zip file is 3.2.3-2 and Img file is 3.3.1-1. Perhaps that is the culprit?
Click to expand...
Click to collapse
It is. Always use the latest version of TWRP, OOS, Magisk, etc UNLESS said otherwise.
DarthVader said:
It is. Always use the latest version of TWRP, OOS, Magisk, etc UNLESS said otherwise.
Click to expand...
Click to collapse
I seem to have edited my last post without noticing your reply. Updated both copies of TWRP, img and zip, to the latest and still crashed. Though if you look at my last post there is one other potential, though I'm not sure what to do about it, I also uploaded pics.
This magic right here!!
After following the directions in this video, I have achieved a custom rom. RR is loading right now. It would seem the major difference is that I wasn't decrypting my data, which is included in this video.
Thanks again for sticking with me and being so patient. ?
lynxon said:
This magic right here!!
After following the directions in this video, I have achieved a custom rom. RR is loading right now. It would seem the major difference is that I wasn't decrypting my data, which is included in this video.
Thanks again for sticking with me and being so patient. ?
Click to expand...
Click to collapse
Hmm. Glad to know that you're up and running. If you don't mind, could you tell me what you did different when flashing this time? And how were you flashing before that lead to the bricks.
DarthVader said:
Hmm. Glad to know that you're up and running. If you don't mind, could you tell me what you did different when flashing this time? And how were you flashing before that lead to the bricks.
Click to expand...
Click to collapse
Basically it comes down to the directions here, which I used as a base, and the directions in this video.
The unlocking bootloader directions didn't have anything about installing a custom ROM, so I figured that once I had everything else set up: unlocked bootloader, TWRP, root, then all I had to do was go to "install" in TWRP and flash the new ROM, which had led to the crash with static at the bottom of my screen.
But then, when using the video tutorial, this guy did things in a particular way. The very first thing was decrypting the data, which I didn't know was necessary, but probably made the difference. This was done under "wipe" and then "format data" in TWRP. He also instructed on flashing the newest version of OxygenOS and TWRP twice, apparently this installed it under both A/B partitions. After installing the custom ROM he also wiped the "data" and "cache." Lots of steps in the video, I felt as if they didn't need to be done exactly the way he directed, but in this case I trusted his method and I'm glad I did.
Related
I have a Verizon LG G2 I tried to flash my backed up stock recovery with Flashify so I could flash the most recent OTA. After accepting the OTA update my phone restarted, tried to install the update, hung at a black screen but was still turned on. If I power it off and back on it shows the LG logo, some white text, then goes to the same black screen. What appears to be happening is that my backup recovery did not restore properly and it's hanging when it tries to go into recovery. It's almost like my recovery partition is blank.
I've tried to follow the instructions to flash back to stock, but I do not believe I'm actually able to get my phone into download mode. When it is plugged into my windows 7 computer with the LG drivers installed it shows up in device manager as QHSUSB_BULK.
Is there any way for me to push a stock recovery, or even a custom recovery to my phone so I can somehow salvage it, or am I permanently bricked?
toopty said:
I have a Verizon LG G2 I tried to flash my backed up stock recovery with Flashify so I could flash the most recent OTA. After accepting the OTA update my phone restarted, tried to install the update, hung at a black screen but was still turned on. If I power it off and back on it shows the LG logo, some white text, then goes to the same black screen. What appears to be happening is that my backup recovery did not restore properly and it's hanging when it tries to go into recovery. It's almost like my recovery partition is blank.
I've tried to follow the instructions to flash back to stock, but I do not believe I'm actually able to get my phone into download mode. When it is plugged into my windows 7 computer with the LG drivers installed it shows up in device manager as QHSUSB_BULK.
Is there any way for me to push a stock recovery, or even a custom recovery to my phone so I can somehow salvage it, or am I permanently bricked?
Click to expand...
Click to collapse
I have the same exact problem. exactly the same. mine doesnt even show up for download mode. this sucks!
cgillie92 said:
I have the same exact problem. exactly the same. mine doesnt even show up for download mode. this sucks!
Click to expand...
Click to collapse
I'm still trying to find a solution I will post here if i have any luck. I've dug through a lot of forum posts and I think what makes us unique is the fact that we have a corrupt or blank recovery partition.
toopty said:
I'm still trying to find a solution I will post here if i have any luck. I've dug through a lot of forum posts and I think what makes us unique is the fact that we have a corrupt or blank recovery partition.
Click to expand...
Click to collapse
Ive looked through a lot too. and its crazy how that would happen i made sure it was rebooting correctly before i took the ota and then when i did the ota bam! only screens i can get to come up are the hardware key control mode and the factory hard reset which both go to white screens after I do them both. every one else probably has not taken the ota.
cgillie92 said:
Ive looked through a lot too. and its crazy how that would happen i made sure it was rebooting correctly before i took the ota and then when i did the ota bam! only screens i can get to come up are the hardware key control mode and the factory hard reset which both go to white screens after I do them both. every one else probably has not taken the ota.
Click to expand...
Click to collapse
One difference in what mine is doing and what your phone is doing. I go to a solid black screen not a white screen. It's very hard to tell my phone is even turned on. I'm having to look if the back-light to verify if it's on or not. I can hold my power button for 10 seconds through one LG logo cycle and then it turns off.
toopty said:
One difference in what mine is doing and what your phone is doing. I go to a solid black screen not a white screen. It's very hard to tell my phone is even turned on. I'm having to look if the back-light to verify if it's on or not. I can hold my power button for 10 seconds through one LG logo cycle and then it turns off.
Click to expand...
Click to collapse
I hope someone helps us out. I really cant afford a new one because the warranty is void. I was going back to stock because of all of the little bugs that need to be ironed out in roms. cause kit kat is around the corner hopefully and my problem virtually is the same i might have had my brightness on auto or something prior to that.
Foolow this tutorial to get your phone back.
http://forum.xda-developers.com/showthread.php?p=48765620
Partager.info said:
Foolow this tutorial to get your phone back.
http://forum.xda-developers.com/showthread.php?p=48765620
Click to expand...
Click to collapse
Thanks for the link. I'm tryingto follow the instructions,but when I get to the step where i plug in my phone it just showes up as a bunch of failes partitions, and slows my ubuntu to a crawl. I'm a linux noob, is there a command i can run to stop this from happening? I also created a reply asking this question in the link you sent me.
Thanks for the help.
Partager.info said:
Foolow this tutorial to get your phone back.
http://forum.xda-developers.com/showthread.php?p=48765620
Click to expand...
Click to collapse
After following the instructions on the above link i was able to get fastboot status on my phone. It did not fully restore my phone however. I was able to flash twrp via fastboot. I was then able to boot into twrp and run the command at this link via twrp terminal http://forum.xda-developers.com/showthread.php?t=2451696
Thanks to everyone for all your help.
toopty said:
Thanks for the link. I'm tryingto follow the instructions,but when I get to the step where i plug in my phone it just showes up as a bunch of failes partitions, and slows my ubuntu to a crawl. I'm a linux noob, is there a command i can run to stop this from happening? I also created a reply asking this question in the link you sent me.
Thanks for the help.
Click to expand...
Click to collapse
How did you get past the ubuntu slowing down? I cant win for ubuntu freezing due to all of the failed partitions either so close but yet so far =/
cgillie92 said:
How did you get past the ubuntu slowing down? I cant win for ubuntu freezing due to all of the failed partitions either so close but yet so far =/
Click to expand...
Click to collapse
Ignore all the message, unplug you phone get ready to type the command, plug it in and immediately press enter to run the command. it took some trial and error, and i had to use this other post to help me out. I actually got fastboot working first, then used this post to http://forum.xda-developers.com/showthread.php?t=2477595 to get download mode working, and to flash twrp recovery. After that i used this post to run the command line from with twrp. http://forum.xda-developers.com/showthread.php?t=2451696 . I didn't have to flash the factory tot to my phone, but i have that option now because download mode is working. This process will work, there is hope for you getting your phone back. I'm fully recovered. I decided 12B is not worth it in the mean time, but if you want 12B you need to flash the factory tot and then upgrade. There is a way to root 12B, but as of this time you are unable to get Custom Recovery on it.
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
LG G2 Stuck @ 49%
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
try with x86
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
i had exact same issue that progress stucked on 49%. if you are using 64bit OS, try to flash it with 32bit(x86) OS
good luck
tinydynamite00 said:
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
Click to expand...
Click to collapse
still no luck
El Killer said:
still no luck
Click to expand...
Click to collapse
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
tinydynamite00 said:
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
Click to expand...
Click to collapse
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
El Killer said:
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
Click to expand...
Click to collapse
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Please READ CAREFULLY
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
Esteef said:
Okay, after 12+ hours of trying every method possible on XDA I finally resolved my issue. I will update the first post just incase any others care or fall into the same dilemma I was in.
The LG Mobile Support tool would not download the firmware and it would NOT ask me for my IMEI to download it either.
So my solution....
***
Installed LG Mobile Support Tool then Installed the LG Drivers. (FROM HERE http://forum.xda-developers.com/showthread.php?t=2471370
BEFORE I connected the phone to the computer. I opened the LG Mobile support tool clicked (Options on the top right).
When the dropped down opened, I clicked the (Upgrade Recovery) option. THEN, is when the prompt opened to ask me what my IMEI is.
Before I entered my IMEI, I connected my phone to the computer in download mode, then proceeded to enter my IMEI and hit OK.
This is when the LG Mobile Support tool SUCCESSFULLY downloaded the latest official LG firmware and installed it.
*** BE AWARE, with the phone connected to the PC, the prompt NEVER appeared to enter my IMEI.
*** But with the phone disconnected, the prompt came up every time. This might be the trick for some people.
*** with the IMEI prompt opened, I then connected the phone , entered the IMEI, then hit OK. BOOM HERPES....
Well I'll polish this up more later. I hope this works for every LG G2 Variant and not just the T-Mobile one (D801)
-Esteef
Click to expand...
Click to collapse
THIS WILL WIPE YOUR PHONE COMPLETELY...
tinydynamite00 said:
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Click to expand...
Click to collapse
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
El Killer said:
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
Click to expand...
Click to collapse
Sounds good. A full charge can make all the difference. I learnt the hard way! One or more of us will be along should you need further help.
I do hope you get this sorted! I've come back from the brink too many times to not believe you won't.
tinydynamite00
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Falaco147 said:
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im trying but i get a battery to low error. i guess i need to charge it longer
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
El Killer said:
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
Click to expand...
Click to collapse
You are welcome... The first time I did it too my battery was at 28% and I panicked since I got the low battery error.
I could of sworn that my phone officially became a paper weight. My heart dropped.
I'm glad you are up and running with the rest of us!
-Esteef
1732359994
hey !
I have the same problem, but... I can't acces to the recovery :/ i tried to install CWM (with Freegee) over Team win recovery and... boot loop :
The rom 4.2.2 flex was gone, no boot animation
-When i pres volum down + power, i have the reset menu, but after that, there is a black screen and it's written at the top left "started usb_start Fastboot Mode ()"
Please, i need your help, i'm so afraid !!
Thx !
Esteef said:
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
THIS WILL WIPE YOUR PHONE COMPLETELY...
Click to expand...
Click to collapse
I know this thread is a bit old, but it saved my butt. Your method worked perfectly. Thank you for this post.
My LG F460 was bricked (error 570), only download mode was working. Esteef method works fine even my pictures and programs was saved. Thanks!
So I was following the thread to get the back capacitive function back and when I flashed with flashify, it suggested that because the filename had "boot" as part of name, it should be flashing boot recovery. I didn't quite understand what this mean so I pressed yes. After a reboot. I hear the initial vibrate, then I see "Zuk Powered by Android" for less than a second", then it goes dark. And reboots. None of the buttons allow me to turn off the device. I also can't get any glimpse of adb or fastboot when running device list. Please help.
Please help.
I've gave up. I tried all the combos to get to recovery. It seems the keys don't register because reboot takes place before the keys do anything. I opened the back, and unplugged battery. Plugged it back in. Then plugged the device to my computer via the cable. Boot loops again automatically, I didn't even touch the power button. Positive this phone is done for.
I've had this phone for a total of 3 days. Thanks Cyanogenmod for removing a useful feature that led to this chain of events.
As an update.
I discovered download mode exists for this from here: http://community.cyngn.com/t/fixed-...nt-not-working-anymore-after-ota-update/221/6
If anyone gets stuck on this. My only approach to turning it off was opening the back cover. The whole back side is taped with double sided tape pretty shut. I ended up digging a hole beside the bezel to pry it open.
Unplugging battery requires removing one of the screws near the top left of the battery.
No being funny but way too many pple are buying phones and rooting without doing the reading first. I studied for months first
Qcomloader... To restore
Tengo10 said:
Qcomloader... To restore
Click to expand...
Click to collapse
Please can you give more details? i m in the same situation as OP. I can acces fastboot. recovery, but i don t know how to flash the image. Qfil doesnt work at all
Extentho said:
Please can you give more details? i m in the same situation as OP. I can acces fastboot. recovery, but i don t know how to flash the image. Qfil doesnt work at all
Click to expand...
Click to collapse
You have acces to fastboot ,so flash stock rom true fastboot,search for tutorial about that,it's clear you dont have search for it.
Problem solved. I sideloaded the stock rom
some more detail please , how u download flash , any link fir stock rom?
Extentho said:
Problem solved. I sideloaded the stock rom
Click to expand...
Click to collapse
So my phone is stuck in an endless loop where it keeps going back to TWRP. I tried using the MSM tool, and its not recognizing the image on my phone it says. Not sure where to go from here.
Bildo41383 said:
So my phone is stuck in an endless loop where it keeps going back to TWRP. I tried using the MSM tool, and its not recognizing the image on my phone it says. Not sure where to go from here.
Click to expand...
Click to collapse
How did you get into the loop? Were you flashing something? Might be worth going into TWRP and flashing the full system image.
Pretty sure you are using msmdownloadtool wrong. Completely shut down the phone. Make sure to DISCONNECT the phone form pc. Hold vol up and vol down for 5 sec. And it should unbrick hour phone
Hold power and volume up till the phone shuts off...
Now with the device completely powered off hold both volume buttons down at the same time for about five seconds then while continuing to hold both volume buttons plug USB in from pc to your phone the screen will be black and it's normal.... After this it should be showing up in the MSM tool....
It showed up in the MSM tool, but when i click start it goes for 4 seconds and then tells me that it doesnt recognize the image.
dunjamon said:
How did you get into the loop? Were you flashing something? Might be worth going into TWRP and flashing the full system image.
Click to expand...
Click to collapse
Yes, i was on the NoLimits rom and wanted to stop using it since i felt it was impacting a few things on my phone that i didnt like, but i really enjoyed Viper4Arise. So i was trying to flash V4A and after i was done flashing it wouldnt load past the unlocked bootloader screen, and i was stupid enough to not create a backup before i started because i didnt think V4A would be that harmful. After trying to wipe my phone and start fresh, i got stuck in the recovery loop.
dunjamon said:
How did you get into the loop? Were you flashing something? Might be worth going into TWRP and flashing the full system image.
Click to expand...
Click to collapse
Also, whats a good thread to get the system image?
Bildo41383 said:
Also, whats a good thread to get the system image?
Click to expand...
Click to collapse
If you are booting into recovery, first try formatting your data. In OnePlus's recovery, select English, and somewhere there is an option to "ERASE EVERYTHING." This will format the partition for OOS. On TWRP, go to Wipe--> Format Data. That may fix the bootloop.
If this does not fix it, the MSM download tool is a good option, however, I see it did not work for you. You can download OnePlus's official ROM from here, and for that, you want to flash it in TWRP like any other mod, then reboot. If you are still boot-looping after that, try formatting your data again for good measure.
For the MSM Download tool, you MUST be on Windows, and you must have extracted the archive fully, which can be done by right-clicking on the ZIP and selecting "Extract all." Then, turn the phone completely off, no USB attached. Press and hold Volume Up + Volume Down, and connect the device to the computer. You should then be able to launch the MSM tool, selecting the normal one for the stock variant, and the factory_mcl for the McClaren variant. If your device does not show up, make sure you have installed Qualcomm drivers from here.
Good luck and I hope you get your phone working!
Bildo41383 said:
So my phone is stuck in an endless loop where it keeps going back to TWRP. I tried using the MSM tool, and its not recognizing the image on my phone it says. Not sure where to go from here.
Click to expand...
Click to collapse
That happened to me as well with the 9.0.1.2 version.
What I did is I used an older version 9.0.1.1 works all the time. No matter what Rom you had previously installed, So try an older version.
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
This saved my butt 100 times...whenever I mess with slot A and B and end up booting to recovery mode again n again
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
pleasuremann said:
Hi guys,
this is my first x compact. I unlocked the bootloader per sony's instructions on their site + what I read here.
I flashed twrp, booted to recovery, and wiped and installed the lineage 16.0 which is stickied.
Everything worked great but various rootcheckers said still not rooted. This bothered me.
I followed the thread (https://forum.xda-developers.com/x-compact/how-to/stock-8-0-root-recovery-t3747479).
I used flashtool to flash stock oreo. After that, bootloops. And can't access recovery.
I can still enter flash mode and fastboot mode, but using the CMD in platform-tools, phone not recognized.
There must be something I can do? Thank you.
Click to expand...
Click to collapse
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
levone1 said:
Use Flashtool again, and this time, before clicking , in the box that says "wipe", check 'userdata'.
Back up anything you want to save in internal storage.
Click to expand...
Click to collapse
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
pleasuremann said:
Thank you so much. I've seen your name a lot around here, I appreciate you taking the time to help. I'm booting now and starting the root process
Click to expand...
Click to collapse
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
levone1 said:
No problem - I'm messing around with a Samsung at the moment, but I still check in here from time to time. I think XC is my favorite phone so far... XZ2C was really nice too, but (unofficially) official Sailfish OS puts XC on top for me...
Click to expand...
Click to collapse
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
jayeffpee said:
Hi friend, please maybe you can help me. I have almost the same issue. But after using LineageOS for some days, my phone stuck in boot logo. I managed to use Flash Tool to flash latest original stock ROM (Customized IBE). Strangely the flash process ended OK, but the phone still stuck in boot logo. I'm only able to force shut down with Volumen Up+Power Off (3 vibrates). Not possible to enter Recovery Mode.
I'm 98% sure that I have flashed with check in wipe USERDATE and also in CUST-RESET. But I wanted to try again, and now Im not able to enter flashmode. Phone gets green light, when volume down, but Flashstool is not recognizing the phone.
Thanks in advance
Click to expand...
Click to collapse
Does fastboot work? Also, what do you ultimately want to do, return to stock?
levone1 said:
Does fastboot work? Also, what do you ultimately want to do, return to stock?
Click to expand...
Click to collapse
yes, after hard work to install drivers, I managed to get the phone to be recognized by Flashtool in fastboot mode. But the phone is not charging when turned off, and its not rebooting. I wanted to try again with stock ROM, since I got some battery issues with LineageOS (phone turned off while playing some games, and worked fine while doing the same with usb cable charging to laptop or AC charger.)
But I cannot do anything right now. Only fastboot mode and force restart works, but it stuck in Sony logo (after normal bootloader unlock 5 seconds warning). What can I do?