I have ownice c900 k5. But i dont know enter recovery mode, can you help me?
Access code, example:
Reset factory: 1260
car setting: 123456
developer options: 7890
where do i find recovery mode ????
I want to use 4g dongle, did you manage to root this head unit?
zayaslui said:
I have ownice c900 k5. But i dont know enter recovery mode, can you help me?
Access code, example:
Reset factory: 1260
car setting: 123456
developer options: 7890
where do i find recovery mode ????
Click to expand...
Click to collapse
try this:
open settings > in search bar, type recovery > you should see the reboot to recovery settings
ja55 said:
I want to use 4g dongle, did you manage to root this head unit?
Click to expand...
Click to collapse
If you haven't found how to root yet, you may check this post https://forum.xda-developers.com/android-auto/android-head-units/ownice-c900-k5-t4080381
Related
Hi, does anyone know the passcode to enter factory settings so I can change the start-up logo on this head unit? The eBay seller seems to think it can’t be done, but the logo is currently set to Audi.
I have tried 00000 and 123456
Thanks
App Version : Car-A300 V2.7.4.0903
Hardware : 0005-02-02-00-02-00-00
System : 2018-09-01
The Model No. is 9CPCL
Password is 688612. Not much happening in factory settings
Hi! I have a Topway ts8 product, how can I enter recovery mode? Help me please ?
This product only has a reset hole, and in addition does not have a physical key. I have tried many ways but cannot enter recovery mode.
I use Google Translate, so the grammar may be inaccurate, I hope everyone will be sympathetic and helpful
sontranpk said:
Hi! I have a Topway ts8 product, how can I enter recovery mode? Help me please ?
This product only has a reset hole, and in addition does not have a physical key. I have tried many ways but cannot enter recovery mode.
I use Google Translate, so the grammar may be inaccurate, I hope everyone will be sympathetic and helpful
Click to expand...
Click to collapse
Did you find out a way or solution?
sontranpk said:
Hi! I have a Topway ts8 product, how can I enter recovery mode? Help me please ?
This product only has a reset hole, and in addition does not have a physical key. I have tried many ways but cannot enter recovery mode.
I use Google Translate, so the grammar may be inaccurate, I hope everyone will be sympathetic and helpful
Click to expand...
Click to collapse
Hello. Did you manage?
Sorry to bring this topic on top again but does anyone have solution to enter recovery mode of this device? I tried to use five fingers to tap, swipe at left top corner, hold reset button… but doesn’t work. My HU is stuck at logo.
Thanks
What has been tried
Currently, I connected KEY2 line to ground, My screen displays "start update", I have a rom in USB but it doesn't recognize the rom, 3s later screen appears "update end".
I've resolved the problem "Device is stuck at logo and couldn't enter recovery mode" : check your Android head unit power cable, there is a line named KEY2. Connect this line to ground. reset your device (use reset hole) then on screen you will see : "update start", now you're in update mode. Make sure you plug your USB in with the firmware, all files will be installed automatically. Make sure you're using right firmware, if not 3s later, screen displays update end.
crayBoy said:
Currently, I connected KEY2 line to ground, My screen displays "start update", I have a rom in USB but it doesn't recognize the rom, 3s later screen appears "update end".
Click to expand...
Click to collapse
Hello! Kindly send me the ROM you used please. I need it badly. TIA.
Hello! May you send me the ROM you used cos I need it badly. TIA
crayBoy said:
I've resolved the problem "Device is stuck at logo and couldn't enter recovery mode" : check your Android head unit power cable, there is a line named KEY2. Connect this line to ground. reset your device (use reset hole) then on screen you will see : "update start", now you're in update mode. Make sure you plug your USB in with the firmware, all files will be installed automatically. Make sure you're using right firmware, if not 3s later, screen displays update end.
Click to expand...
Click to collapse
Waki093 said:
Hello! May you send me the ROM you used cos I need it badly. TIA
Click to expand...
Click to collapse
I mean I need the files in the USB you used to update your device. Can you share it to me please?
crayBoy said:
I've resolved the problem "Device is stuck at logo and couldn't enter recovery mode" : check your Android head unit power cable, there is a line named KEY2. Connect this line to ground. reset your device (use reset hole) then on screen you will see : "update start", now you're in update mode. Make sure you plug your USB in with the firmware, all files will be installed automatically. Make sure you're using right firmware, if not 3s later, screen displays update end.
Click to expand...
Click to collapse
Waki093 said:
I mean I need the files in the USB you used to update your device. Can you share it to me please?
Click to expand...
Click to collapse
I have purchased this android Stereo:
Android Stereo model 8227L_Demo YT9216B_00002_V004_20200505
When I try to perform a factory reset from android settings, backup and reset option, system will reboot and an android icon "Erasing" is coming. But soon after this another android image came and it will get stuck at this screen.
Please help me to resolve this issue.
Also do we have any latest update to this version?
If any android upgrade could help this?
Try sp flash tool
Does this requires root ?
The hung android image will be gone if we unplug the power socket.
I just bought my stereo. I am able to use the stereo.
Issue occurs only when I perform a factory data reset -> Erase everything.
Is it okay to use this stereo as such ?
Or should I root the system and fix this issue firstly ?
Rahuljs said:
Try sp flash tool
Click to expand...
Click to collapse
Actual Issue
My android stereo model model 8227L_Demo YT9216B_00002_V004_20200505. When I click on Settings -> Android Settings -> Backup & reset -> Factory Data Reset -> Reset Vehicular Platform -> Erase Everything -> "Factory data Reset [restarting]" Pop up message will be displayed and screen will go black and it restarts with Green Android Icon, then a green android icon with text "Erasing: is displayed and after sometime, say about 25 seconds another blue android icon in the lying position with a Blue exclamation mark in the chest position and one Chinese text is shown in the screen. If I unplug the power socket and reconnect again it will restart and will work. But factory reset is not completed, I guess. I am able to use this device as a stereo and is working. I have purchased this recently.
Should I try for an android/firmware upgrade ? If yes please provide the latest firmware available.
Should I try any settings via the Recovery mode ? If yes, please guide me how to get recovery mode in this model stereo.
or
Shall I simply ignore this issue and use it normally without doing any factory reset ? Is this the preferable method instead of rooting the device and trying to flash the ROM and all ?
Experts, please suggest me why this error coming and is there any fix like upgrading/recovery mode available for this other than Rooting/Flashing.
Thanks in advance.
sreejithsreekumar90 said:
My android stereo model model 8227L_Demo YT9216B_00002_V004_20200505. When I click on Settings -> Android Settings -> Backup & reset -> Factory Data Reset -> Reset Vehicular Platform -> Erase Everything -> "Factory data Reset [restarting]" Pop up message will be displayed and screen will go black and it restarts with Green Android Icon, then a green android icon with text "Erasing: is displayed and after sometime, say about 25 seconds another blue android icon in the lying position with a Blue exclamation mark in the chest position and one Chinese text is shown in the screen. If I unplug the power socket and reconnect again it will restart and will work. But factory reset is not completed, I guess. I am able to use this device as a stereo and is working. I have purchased this recently.
Should I try for an android/firmware upgrade ? If yes please provide the latest firmware available.
Should I try any settings via the Recovery mode ? If yes, please guide me how to get recovery mode in this model stereo.
or
Shall I simply ignore this issue and use it normally without doing any factory reset ? Is this the preferable method instead of rooting the device and trying to flash the ROM and all ?
Experts, please suggest me why this error coming and is there any fix like upgrading/recovery mode available for this other than Rooting/Flashing.
Thanks in advance.
Click to expand...
Click to collapse
link for new firmware: https://drive.google.com/file/d/1efeyIfvSHdX_CNKJZgdlkTOiItO7hkzG/view?usp=sharing
"Firmware YT9216B 00002 V004 20200608"
Method1 : Extract the content in root of usb drive and plug in the usb and then start the device. Mostly the device will detect the update else goto car settings and select android upgrade.
Method 2 : IF the above steps didn't help then create XYAUTOPG folder in usb drive and then extract the files in it and plug in and start the device.
Also make sure you change usb port if the update not detected by the device.
---------- Post added at 08:52 PM ---------- Previous post was at 08:51 PM ----------
sreejithsreekumar90 said:
My android stereo model model 8227L_Demo YT9216B_00002_V004_20200505. When I click on Settings -> Android Settings -> Backup & reset -> Factory Data Reset -> Reset Vehicular Platform -> Erase Everything -> "Factory data Reset [restarting]" Pop up message will be displayed and screen will go black and it restarts with Green Android Icon, then a green android icon with text "Erasing: is displayed and after sometime, say about 25 seconds another blue android icon in the lying position with a Blue exclamation mark in the chest position and one Chinese text is shown in the screen. If I unplug the power socket and reconnect again it will restart and will work. But factory reset is not completed, I guess. I am able to use this device as a stereo and is working. I have purchased this recently.
Should I try for an android/firmware upgrade ? If yes please provide the latest firmware available.
Should I try any settings via the Recovery mode ? If yes, please guide me how to get recovery mode in this model stereo.
or
Shall I simply ignore this issue and use it normally without doing any factory reset ? Is this the preferable method instead of rooting the device and trying to flash the ROM and all ?
Experts, please suggest me why this error coming and is there any fix like upgrading/recovery mode available for this other than Rooting/Flashing.
Thanks in advance.
Click to expand...
Click to collapse
May i know wether your device is 1gb variant or 2gb variant. You can check specifications in cpu-z app.
Shreyas17 said:
link for new firmware: https://drive.google.com/file/d/1efeyIfvSHdX_CNKJZgdlkTOiItO7hkzG/view?usp=sharing
"Firmware YT9216B 00002 V004 20200608"
Method1 : Extract the content in root of usb drive and plug in the usb and then start the device. Mostly the device will detect the update else goto car settings and select android upgrade.
Method 2 : IF the above steps didn't help then create XYAUTOPG folder in usb drive and then extract the files in it and plug in and start the device.
Also make sure you change usb port if the update not detected by the device.
---------- Post added at 08:52 PM ---------- Previous post was at 08:51 PM ----------
May i know wether your device is 1gb variant or 2gb variant. You can check specifications in cpu-z app.
Click to expand...
Click to collapse
It is 2gb 32gb model.
In car settings, android upgrade button is disabled for me.
sreejithsreekumar90 said:
It is 2gb 32gb model.
In car settings, android upgrade button is disabled for me.
Click to expand...
Click to collapse
try using different usb port . Also try rst button onscreen that might detect the update.
Shreyas17 said:
link for new firmware: https://drive.google.com/file/d/1efeyIfvSHdX_CNKJZgdlkTOiItO7hkzG/view?usp=sharing
"Firmware YT9216B 00002 V004 20200608"
Method1 : Extract the content in root of usb drive and plug in the usb and then start the device. Mostly the device will detect the update else goto car settings and select android upgrade.
Method 2 : IF the above steps didn't help then create XYAUTOPG folder in usb drive and then extract the files in it and plug in and start the device.
Also make sure you change usb port if the update not detected by the device.
---------- Post added at 08:52 PM ---------- Previous post was at 08:51 PM ----------
May i know wether your device is 1gb variant or 2gb variant. You can check specifications in cpu-z app.
Click to expand...
Click to collapse
File not found please update the link
Hello i have a head unit junsun v1 ... 2g 32g and 4g internet with android 9..
It is impossible to enter factory setting and développer menu..
i try all code possible ..
Before i test code 5678 and i can enter .. but i have play with security setting .. And now impossible to acess factory setting..
Do you have alternarive to acess factory setting..
Hi,
I am not sure what setting i have done or after updated system firmware. The easycon no longer working. Everytime i press the app icon, it went in and immediately kick out to the main icon screen.
Another issue is after updated the system firmware, the side touch panel lighting cannot be change colour. Floating button also gone missing.
Appreciate someone can help out.
I have t3_p1 1-16 Android 10 units. I reset it to factory settings. Screen mirror no longer works at all. Even the USB Car Play Dongle is not working. Is there a hero to offer a solution?
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Badr_ps said:
our head unit should be connected to WiFi for the MCU up
Click to expand...
Click to collapse
Badr_ps said:
hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working and also it's T3 P1 and I solved the problem.
The solution is to go to settings, car settings, extra settings ( pass 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after updation, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Click to expand...
Click to collapse
Thank you very much for the detailed explanation. I will try. I will share the result here.
famepa said:
Thank you very much for the detailed explanation. I will try. I will share the result here.
Click to expand...
Click to collapse
Hello again. I tried every option but it didn't work. Unable to connect via wifi mirror or cable. I think there is a hardware problem.
No encienden las luces de los botones laterales. No conecta el bluetooh.
Hi
I have a problem with quad core t3p1 android 9. It is stuck on the logo logo. Can anyone help me how to enter its recovery mode? Thanks
I also need help with how to enter recovery mode, anyone kindly assist.