Bluetooth crashing after flashing custom kernel:crying:
Flash back stock
Hope u have a backup, when not extract the boot.img and flash it
joke19 said:
Flash back stock
Hope u have a backup, when not extract the boot.img and flash it
Click to expand...
Click to collapse
But i want to use a custom kernel:crying:
Ahmed58 said:
But i want to use a custom kernel:crying:
Click to expand...
Click to collapse
Which rom and which kernel make ur problem?
Related
I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....
rahulvikhe1 said:
I have lenovo a6000 plus
With lp stock rom 5.0.1
Im downloaded cm 11 custom rom which is based on kk
How to flash this rom without pc , i have TWRP recovery
Plz help me
Thanx in adv....
Click to expand...
Click to collapse
Just flash it normally
wipe system, data, cache, and dalvik. then flash it like usual.
Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?
Benson M Kurian said:
Will my device(lenovo a6000) brick if I downgrade from 5.0.2 to cm11?
Click to expand...
Click to collapse
No it won't get bricked.
Just take a backup of the current ROM using recovery before flashing CM 11.
1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.
technocrazyboy said:
Just flash it normally
Click to expand...
Click to collapse
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.
got hard bricked when flashing directly
and wasted 150 rs in service center
jatin vekariya said:
If you direct flash it then your devise stuck on lenovo logo .
so don't directly flash it.
Click to expand...
Click to collapse
then how to flash
AXAz0r said:
1. Flash ED300's Rollback .zip from here. (Source Thread by ED300.)
2. Flash your desired KK based ROM.
Click to expand...
Click to collapse
can tried this method
then plz give me full tutorial
thanx
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
rahulvikhe1 said:
then how to flash
Click to expand...
Click to collapse
just follow installation procedure in this thread
http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
vishal.krr said:
Use TWRP recovery 2.7 if you wanna flash any KK ROM.
Boot into recovery. Make backup of System ( in case you changed your mind and wanted to roll back )
Goto Wipe--> Advance wipe. Then wipe out System, Data, Cache n Dalvik cache.
Goto install, flash the ROM, and gapps. It would work fine
P.S. the instructions provided by the developer of the ROM.
Click to expand...
Click to collapse
i tryed this method . but my phone got bricked.
rahulvikhe1 said:
i tryed this method . but my phone got bricked.
Click to expand...
Click to collapse
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.
CM 11 !
vishal.krr said:
Sorry to hear. Can you give me the link to the ROM you wanna use? I'll try flashing it myself first and then will reach out you.
In mean time try to flash stock ROM.
Click to expand...
Click to collapse
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you
rahulvikhe1 said:
Thank you for asking me seriously.
I want to flash custom or stock kitkat rom which are following:-
1.http://forum.xda-developers.com/lenovo-a6000/development/rom-cyanogenmod-11-t3331154
2.http://forum.xda-developers.com/lenovo-a6000/development/cm11-lenovo-a6000-plus-bugs-fixed-t3163636
or stock kitkat rom
thank you
Click to expand...
Click to collapse
I'll try flashing these two and get back to you ASAP!
kk thank you
which is rom u r using . can it is good for battery saving
waiting
rahulvikhe1 said:
kk thank you
which is rom u r using . can it is good for battery saving
Click to expand...
Click to collapse
Waiting
First backup ur current rom.... download kitkat firmware file by ed300 then flash it via twrp then wipe everything then agaun flash that file after that flssh cm 11 and gapps . It will work ..
Yeah I rooted my phone while back , Now I want to get back to stock recovery and remove my current TWRP recovery ! Please help me out :3 Thank you.
Reflash firmware
4rctic5tar said:
Yeah I rooted my phone while back , Now I want to get back to stock recovery and remove my current TWRP recovery ! Please help me out :3 Thank you.
Click to expand...
Click to collapse
Either flash the whole stock rom or extract the recovery.img from it then flash thru fastboot
pijes said:
Either flash the whole stock rom or extract the recovery.img from it then flash thru fastboot
Click to expand...
Click to collapse
Okay I've downloaded my current android version stock firmware ! And can you tell me one more thing ?
- if I want to flash my stock firmware again ! Do I need to clean everything up like we do while installing custom ROM ?! Thanks again mate.
4rctic5tar said:
Okay I've downloaded my current android version stock firmware ! And can you tell me one more thing ?
- if I want to flash my stock firmware again ! Do I need to clean everything up like we do while installing custom ROM ?! Thanks again mate.
Click to expand...
Click to collapse
Get a Nandroid backup. Wipe using your custom recovery, flash stock all (Unless you're downgrading). Re-lock bootloader if you want to after stock flash and you should be okay.
How can we flash two or more ROMs on the phone?
I want use one ROM as my daily and another one for testing.
https://forum.xda-developers.com/oneplus-2/development/mod-multirom-v33b-oneplus2-t3592475
MZO said:
https://forum.xda-developers.com/oneplus-2/development/mod-multirom-v33b-oneplus2-t3592475
Click to expand...
Click to collapse
when I flash the custom recovery it will working without flash another zip?
can I change the kernel after that setup?
can I flash it on the current ROM without wipe?
Doronmak said:
when I flash the custom recovery it will working without flash another zip?
can I change the kernel after that setup?
can I flash it on the current ROM without wipe?
Click to expand...
Click to collapse
do a little research on multi rom a lot of the info is on the link he send you. also you need to flash the custom recovery for multi rom and then the multi rom zip to make it all work. gl hf
Guys,
I need stock kernel for my I9500 running kitkat 4.4.2 (INDIA-INS), please share if anyone has it.
And how would you flash it?
Pwnycorn said:
And how would you flash it?
Click to expand...
Click to collapse
Via TWRP recovery! I need a flashable zip as I was not successful in extracting it from the stock ROM I have.
Atrix2dBeast said:
Via TWRP recovery! I need a flashable zip as I was not successful in extracting it from the stock ROM I have.
Click to expand...
Click to collapse
I think it would be simpler and faster to just flash the stock ROM, since nobody seems to be able to offer you any further advice on this.
Pwnycorn said:
I think it would be simpler and faster to just flash the stock ROM, since nobody seems to be able to offer you any further advice on this.
Click to expand...
Click to collapse
Okay Pwnycorn, thanks for the reply!
Pwnycorn said:
I think it would be simpler and faster to just flash the stock ROM, since nobody seems to be able to offer you any further advice on this.
Click to expand...
Click to collapse
Hi @Pwnycorn ,
I just extracted the boot.img from stock and flashed it via Flashify and it worked.
Just wanted to to let you know, no offence ,might help someone in need.
Thanks.
I am on sokoban custom rom b564
Chinese location, like pic in attachment
How can I change to European build b895 as I use it abase to install custom roms like linage,slimroms,pac-man?
Napst3r88 said:
I am on sokoban custom rom b564
Chinese location, like pic in attachment
How can I change to European build b895 as I use it abase to install custom roms like linage,slimroms,pac-man?
Click to expand...
Click to collapse
Flash B895 zip. Easy
Suleiman01 said:
Flash B895 zip. Easy
Click to expand...
Click to collapse
B895 zip need stock b895 as a base before flash it bro
And what about location ,I will get balong
Napst3r88 said:
B895 zip need stock b895 as a base before flash it bro
And what about location ,I will get balong
Click to expand...
Click to collapse
No it doesn't. I flashed it over B564, yes you will get balong bug but its normal. Just flash Resurrection remix afterwards or whatever rom you like.
Suleiman01 said:
No it doesn't. I flashed it over B564, yes you will get balong bug but its normal. Just flash Resurrection remix afterwards or whatever rom you like.
Click to expand...
Click to collapse
ok man i will try but just send me link with B895
you mean b895 moded with shokoban or stock?
as if stock i need to unroot and flash stock recovery
Napst3r88 said:
ok man i will try but just send me link with B895
you mean b895 moded with shokoban or stock?
as if stock i need to unroot and flash stock recovery
Click to expand...
Click to collapse
https://goo.gl/mqMdqS
Thanks man I just install linage os13.1
Napst3r88 said:
Thanks man I just install linage os13.1
Click to expand...
Click to collapse
You're welcome.