So after updaing to android 10 ive been experiencing this issue. My fingerprint has been buggy basically:
Either the fingerprint light just doesn't appear and it says that i moved my finger or something(I had this issue on some custom roms, which is the reason why none of the custom roms stuck on me) or
the fingerprint lights up for a split second and then just disappears.
Anyone else having this issue?
TBH, it started working slow after i updated it to Android 10, but after removing and adding fingerprint again, now its even faster than Android 9.
Do you have "show taps" turned on in your developer options?
Related
I'm afraid that I never noticed if this was an issue caused when upgrading to MM or something with the Note 4 as I moved straight up from the Note 3, and installed MM straight away. I'm running stock firmware, and I'm rooted with xposed running.
I'm using the No Lock Home Xposed mod and when I'm connected to one of my chosen Wifi networks I no longer need to use the fingerprint scanner (the phone stays unlocked) but I ALWAYS have to swipe when the device is woken. And when I unlock with the fingerprint scanner.
I've tried altering all kinds of settings but to no avail. In the greater scheme of things it's not a big issue but it is rather tedious!
Any suggestions? And yes, I've tried it with the Xposed mod not activated
I just updated to Nougat and after a few hours my fingerprint scanner starts acting really weird. Sometimes it picks up my finger but takes a few seconds to unlock and other times it just doesn't work (no haptic feed back at all). A reboot fixes it for a bit but it eventually starts acting up again. Anyone else experiencing this? I have seen similar issues in the past on MM but never had this problem until today. Also didn't find any fixes (besides other people saying to reboot).
+1 for the delayed unlock. You're not alone. Many others have reported the same problem post Nougat update.
You're not alone. I observed delays as well, especially after the Nougat update
I haven't noticed a change, but have read that if you change the following it should improve
Settings>Developer Options>Animator Duration Scale = .5x
My fingerprint scanner is almost instant.
You can also try installing Ninja kernel. The fingerprint scanner works using the big cluster instead of the little like the stock kernel. My fingerprint scanner is almost instant with this setup.
Hello, I have a OnePlus Two running the latest CM 14.1 nightly. My fingerprint sensor will not work. It stopped working a week ago, at which point I was still running Oxygen OS, whatever the latest update for it had been. my sensor became buggy, not responding, then quit altogether. I have to use onscreen buttons. I still had fingerprint options at that point in my system settings, but I couldn't do anything with them because they were grayed out. I ended up switching to CM 14.1 hoping a new ROM would help it to work, but now my fingerprint sensor is still non-functional.
At this point, I do not even have fingerprint settings in my settings. I can not locate the com.fingerprint.... process that is supposed to be running, so at this point i feel like the sensor might work, but the process is gone or does not exist. When I dial *#808# it does not recognize that dial code and gives me no feedback, which reinforces my thought that the fingerprint service just does not exist.
user: johnthepig, at the end of this forum (http://forum.xda-developers.com/oneplus-2/help/home-button-tried-fixes-t3366992/page2) said back in may that after Oxygen 3.0.1, the fingerprint sensor would not work in anything else. that he tried going to CM and it wouldn't work and then he went back to Oxygen and it worked, and back to CM again and it wouldn't work. My experience was that it just stopped working in Oxygen. Is there a way to manually give my phone the proper com.fingerprint service/process to run?
jcgordon10 said:
Hello, I have a OnePlus Two running the latest CM 14.1 nightly. My fingerprint sensor will not work. It stopped working a week ago, at which point I was still running Oxygen OS, whatever the latest update for it had been. my sensor became buggy, not responding, then quit altogether. I have to use onscreen buttons. I still had fingerprint options at that point in my system settings, but I couldn't do anything with them because they were grayed out. I ended up switching to CM 14.1 hoping a new ROM would help it to work, but now my fingerprint sensor is still non-functional.
At this point, I do not even have fingerprint settings in my settings. I can not locate the com.fingerprint.... process that is supposed to be running, so at this point i feel like the sensor might work, but the process is gone or does not exist. When I dial *#808# it does not recognize that dial code and gives me no feedback, which reinforces my thought that the fingerprint service just does not exist.
user: johnthepig, at the end of this forum (http://forum.xda-developers.com/oneplus-2/help/home-button-tried-fixes-t3366992/page2) said back in may that after Oxygen 3.0.1, the fingerprint sensor would not work in anything else. that he tried going to CM and it wouldn't work and then he went back to Oxygen and it worked, and back to CM again and it wouldn't work. My experience was that it just stopped working in Oxygen. Is there a way to manually give my phone the proper com.fingerprint service/process to run?
Click to expand...
Click to collapse
This is BY FAR the best description and observation of the issue. Did you find any information on that service missing from the apps menu?
Roadsalt said:
This is BY FAR the best description and observation of the issue. Did you find any information on that service missing from the apps menu?
Click to expand...
Click to collapse
No, unfortunately I never found a resolution to the issue. I'm still using my OnePlus Two and just operating it with the on screen buttons. At this point I'm just used to it and don't think about it anymore. It was very annoying originally. I'm still not sure if it's just the missing process, or whether it's a hardware issue and because the hardware isn't there, it doesn't obtain the process or what. Idk honestly. I resigned myself to on screen buttons till I upgrade in another year or so.
Hey guys!
Just to be clear it is not a hardware issue I don't have any kind of a problem with the stock ROM. Everything fingerprint related works as it should.
The problem. I am able to set several apps to use fingerprint login (couple of banking apps and ebay app for example). Everything works fine until the first reboot or the first day. Then the apps suddenly stop to use (or see or detect) the fingerprint sensor. They either start with an error or give the error when I try to login with my finger. When I log in the app with a PIN code I can see the fingerprint login is disabled and when I try to re-enable it the most of the apps crash, some of them just repeat again the error. It's not that they don't recognize the fingerprint itself. They simply don't get that far - they can't use the sensor.
The problem for me is present in every custom ROM I've tried, no matter 8.1 or 9.0. I've tested Liquid Remix (9.0), Havoc (9.0) and Bootleggers (8.1)
On the other hand unlocking the device with fingerprint works always fast and perfectly fine no matter the ROM - stock or custom.
Just a little update here. I found another ROM that (so far) has no problems in regards of the fingerprint. The unofficial Pixel Experience.
My device was not particularly slow. It was working just fine ,then I started noticing that whenever I pressed the Recent Button to switch the apps, the smaller windows that form on pressing the button would have squared corners which become round after a second. It glitches. It didn't happen before. I have tried resetting my device. Also tried the safe mode. Still I cannot remove this problem.
Any solutions?
Yes
Which would be?
yes mine was very slow ... I put the root, kept the android 9 pie stock and changed the kernel to A2N kernel, Its very fast now.
i am very happy \o_