Related
SOLVED
See my most recent post in this thread
______________________________________________________________________________________
Firstly, I've spent the last three days scouring XDA and some other forums searching for solutions and trying various options.
The screen on my N4 has cracked and I've lost the use of the bottom half of the touchscreen. This means that I can't unlock my phone.
The phone is insured and will be repaired, but there are photos of my son's first birthday on the internal memory that I don't want to lose. I'm concerned that the phone will be factory reset during a repair or I'll receive a replacement. I'm trying to access the internal memory remotely to backup these files before I send the phone off. The problem is that I hadn't enabled USB debugging before the accident. The phone is completely stock including the bootloader.
So I can access via fastboot but not via adb.
Q1: Can I pull file from the internal memory via fastboot
Q2: Can I enable usb debugging via fastboot
Q3: The phone is set to display as an MTP device in windows but as I can't unlock the screen, none of the files are showing. Is there anyway around this?
Q4: Purely via fastboot, can I unlock the bootloader, install CWM so to use ADB within it and then return to a stock bootloader?
I think they're my options. Any answers to the above or alternatives would be appreciated.
All of the other threads regarding this, the users seem to either already have CWM installed or they're looking to perform a factory reset. I did consider resetting the device via the bootloader in order to bypass the screenlock but I understand that on the N4 this wipes the internal memory as well.
Unlocking the device isn't needed to pull the files from it, just plug it in and get what you need from the internal memory
EddyOS said:
Unlocking the device isn't needed to pull the files from it, just plug it in and get what you need from the internal memory
Click to expand...
Click to collapse
On mine if I plug it in it appears as an MTP device but with no files. I then have to unlock the screen and select USB something-or-other from the notificationss bar, then the files appear in windows.
Strange, mine never needs to be unlocked...I'm using Windows 8 Pro btw but it also works fine in work on Vista Business
Only other thing I can think of is the fact I'm unlocked and running a custom ROM, I've never used my N4 stock. It was on CM within 30 mins of receiving the unit!
So over the last week I've managed to solve my problem. I've seen several other people asking for help with no luck so I'm posting this here in the hope that the search function will bring it up.
Firstly, my phone was completely stock running 4.2.2, unrooted, with the locked stock bootloader. USB Debugging WAS NOT enabled. I had pattern lock enabled when I dropped the phone. The screen cracked and the bottom half of the touchscreen was unresponsive.
The phone was insured, but I wanted to backup photos from the device before sending it off for repair/replacement.
HOW I FIXED IT.
Please note, you need at least some part of the screen to be working, specifically, some part of the screen where the pattern lock is.
You only need two pieces of software. The Android SDK and the Nexus 4 Toolkit http://forum.xda-developers.com/showthread.php?t=1995688
If you are running 4.2.2 you will need to update the toolkit. I also had the standard issues of installing the USB drivers for the N4. You need to get to a point where is shows up as an ADB device in Windows Device Manager.
As I didn't have USB debuggin enabled I couldn't connect tothe phone via ADB, but if you put it into recovery mode you can use Fastboot. Hold down the power key to turn the device off and turn it on while holding down Vol Down to load up recovery mode.
If you then start the N4 Toolkit, you should see the device listed as a fast boot device.
From within the toolkit unlock your bootloader.
Flash a temporary bootlader, (option 10) as the touchscreeen was broken it has to be CWM.
Once in CWM you can start to use ADB. Open up a DOS command prompt in Windows, go to your SDK/platform tools folder/ to access ADB.exe and you can use the pull command to copy folders to your PC. At this point, instead you can use applications like ADBexplorer or DroidExplorer to do the same thing through a nicer GUI.
If you'd like to still be able to use your phone, although without the touchscreen, you can load an unstable image to get into android and then use ADB to start changing system settings.
Firstly, before exiting CWM, clear the cache. Without doing this the phone jsut hung on the Nexus symbol while loading the image.
in the toolkit go to root/unroot options and select load unstable image(option 4 and then 6). This will fire you up into Android and it should be set up as you left it.
I wanted to enable bluetooth so to use a keyboard (I didn't have a mouse but this is a better option) from the DOS window type the following command
am start -a android.bluetooth.adapter.action.REQUEST_ENABLE
You should eventually get a pop-up on your screen saying that a request has been made to enable bluetooth. Hopefully your screen is working enough to select enable.
Then I use the workaround to disable the sceenlock, found here -> (http://www.addictivetips.com/androi...e-pattern-unlock-on-android-via-adb-commands/) I found method 2 worked for me. I imagine this will be stopped in a future update.
Method 1
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit
Method 2
adb shell rm /data/system/gesture.key
If either of these methods are successful you will be able to unlock the phone with an pattern, hence why you need to be able to touch some part of it.
From then, my bluetooth keyboard was already mated to my phone to I was able the navigate the menus to turn on USB Debugging, turn-off the screen lock and a few other bits and pieces I needed to do.
I then restarted (I was still working within the unstable image) and on reboot, all my changes had al been applied. No screen lock, bluetooth enabled and USB Debugging enabled.
Hopefully this will be of help to those in a similar position. Thanks has to go to the toolkit though which provides all the necessary access to carry this out.
I should probably add, you can use the toolkit to relock the bootlader if you're concerned about that and if you can't click the screen to enable bluetooth or mate a keyboard or mouse, once you have USB Debugging enabled you can use software like Screencast to control you phone's screen from a PC.
So typically, just as I fill my claim to repair my nexus my wife drops her, smashing the screen even more than I did so she has absolutely no use of her screen. I went through the process again and though I'd post it in a more simple fashion.
1. Reset Nexus into recovery mode (power & volume down)
2. Connect to PC via USB. Install the USB driver from the SDK so that it appears as an ADB device
3. Fire up the updated toolkit. You should see the nexus as a fast boot device
4. Unlock bootloader
5. Using option 10 on the toolkit load up CWM on the phone. This gives you ADB access so can you pull files off the device via ADB although I could access the SD card through programs like Droid explorer.
6. If you want to carry on further and get into Android properly, you'll need to wipe the cache from within CWM
7. Reboot and hold down the volume key to get back into recovery
8. In the toolkit select root options (option 4) and load temporary image (6) If it hangs on the google or nexus logo you've not wiped the cache.
9. With this second phone I couldn't access it through droid explorer as it was popping up as an MTP device but I could pull the files via command prompt or through the toolkit
10. If you have any use of the touchscreen at all you can run the following command which will then mean that any touch will unlock the device
adb shell rm /data/system/gesture.key11. You can activate bluetooth via adb if you have a mouse or keyboard available but you will need to be able to press okay on the screen
12. Any changes you make in the unstable android image such as lockscreen, bluetooth, enabling debugging, etc will remain in place when you restart the device.
13. You can relock the bootloader if you wish via the toolkit. You just need to be in recovery mode first.
Hope this simplifies the process
Does unlocking bootloader via toolkit not wipe everything? How are you unlocking bootloader and still able to pull data off?
EDIT: it appears fastboot oem unlock on the Nexus 4 *does not* wipe data!
Carpetboy said:
So typically, just as I fill my claim to repair my nexus my wife drops her, smashing the screen even more than I did so she has absolutely no use of her screen. I went through the process again and though I'd post it in a more simple fashion.
1. Reset Nexus into recovery mode (power & volume down)
2. Connect to PC via USB. Install the USB driver from the SDK so that it appears as an ADB device
3. Fire up the updated toolkit. You should see the nexus as a fast boot device
4. Unlock bootloader
5. Using option 10 on the toolkit load up CWM on the phone. This gives you ADB access so can you pull files off the device via ADB although I could access the SD card through programs like Droid explorer.
6. If you want to carry on further and get into Android properly, you'll need to wipe the cache from within CWM
7. Reboot and hold down the volume key to get back into recovery
8. In the toolkit select root options (option 4) and load temporary image (6) If it hangs on the google or nexus logo you've not wiped the cache.
9. With this second phone I couldn't access it through droid explorer as it was popping up as an MTP device but I could pull the files via command prompt or through the toolkit
10. If you have any use of the touchscreen at all you can run the following command which will then mean that any touch will unlock the device
adb shell rm /data/system/gesture.key11. You can activate bluetooth via adb if you have a mouse or keyboard available but you will need to be able to press okay on the screen
12. Any changes you make in the unstable android image such as lockscreen, bluetooth, enabling debugging, etc will remain in place when you restart the device.
13. You can relock the bootloader if you wish via the toolkit. You just need to be in recovery mode first.
Hope this simplifies the process
Click to expand...
Click to collapse
Please HELP, i can get to step 5...but then, when I try to use ADB via cmd (ie. adb shell), it says "error: device offline". what can it be? I don't know if this is a driver related issue (i've tried the toolkit drivers and the SDK drivers)...i'm desperated, I can't access the phone!!
Thanks in advance
not working for me
i'm in same boat with cracked screen. i can get CWM installed but i cant enabled usb debugging without touching the screen so i cant get adb working. how did you turn on usb debugging without the screen
Thanks for the guide.
Im curious on why youd want to boot an unstable(temporary) image after pulling the files using ADB in CWM recovery. Why not just wipe cache and reboot normally into Android ?
usb debugging without screen?
compsmart said:
i'm in same boat with cracked screen. i can get CWM installed but i cant enabled usb debugging without touching the screen so i cant get adb working. how did you turn on usb debugging without the screen
Click to expand...
Click to collapse
Can someone please walk me through how to do this? My screen is completely broken, but I can still turn on/off, I have reason to believe debugging is off because when I connect the phone (a Samsung galaxy sII skyrocket) to my Toshiba laptop via a micro USB, it makes a sound to signal that it's connected. Drives E and F then open up (but are empty) and then disappear. I have no idea what's going on but I absolutely cannot lose all of the data on this phone. Pictures and videos from my old blackberry Torch are on here too, making up about 4 years of my daughter's life that I would lose if I cannot retrieve. Also, I am not super -tech savvy, so if someone could help me I would be forever grateful.
Please!!
:crying:
almost the same issue
I have an Asus memo pad 10 (smart) some of the core apps have been corrupted, (keyboard, UI, launcher etc all the essential stuff) I've been trying to reinstall my UI and launcher from my computer when i found out that USB debugging was disabled. the tablet is basically unusable, i have no way of enabling from the tablet itself. is there a piece of script or something i could run from my PC to enable it?
any help would be greatly appreciated :crying:
bob mc bob said:
I have an Asus memo pad 10 (smart) some of the core apps have been corrupted, (keyboard, UI, launcher etc all the essential stuff) I've been trying to reinstall my UI and launcher from my computer when i found out that USB debugging was disabled. the tablet is basically unusable, i have no way of enabling from the tablet itself. is there a piece of script or something i could run from my PC to enable it?
any help would be greatly appreciated :crying:
Click to expand...
Click to collapse
My screen became unresponsive a while back. I ended up getting and OTG cable and plugging in a mouse. This allowed me to do everything as if the touchscreen was working. There's also an app called MyMobiler that let me plug in my device over USB and control my screen from my PC. Those two helped me enable USB Debugging, flash a custom ROM, root the phone, backup everything I needed, then restore the phone to stock. I hope this helps.
*Sorry for bumping such an old post*
Thanks for the really useful guide!
Could you or someone just confirm to me that unlocking the bootloader does not factory reset? The reason I'm doing this process is to access my personal data so it's important that I can keep it all.
I ask because at the unlock bootloader stage it implicitly warns me that there'll be a factory reset.
Thanks again!
HikerMan said:
*Sorry for bumping such an old post*
Thanks for the really useful guide!
Could you or someone just confirm to me that unlocking the bootloader does not factory reset? The reason I'm doing this process is to access my personal data so it's important that I can keep it all.
I ask because at the unlock bootloader stage it implicitly warns me that there'll be a factory reset.
Thanks again!
Click to expand...
Click to collapse
Unlocking to bootloader will wipe your device
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Unlocking to bootloader will wipe your device
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
In that case, I am confused as to how OP managed to unlock his bootloader. He actually states that the purpose of this was to retrieve data, like me.
Also, in a previous comment in this thread by jw95275, they claim that "it appears fastboot oem unlock on the Nexus 4 *does not* wipe data".
I am concerned about the conflicting answers so far, so will hold off for an explanation before I do anything. Thanks for the response!
HikerMan said:
In that case, I am confused as to how OP managed to unlock his bootloader. He actually states that the purpose of this was to retrieve data, like me.
Also, in a previous comment in this thread by jw95275, they claim that "it appears fastboot oem unlock on the Nexus 4 *does not* wipe data".
I am concerned about the conflicting answers so far, so will hold off for an explanation before I do anything. Thanks for the response!
Click to expand...
Click to collapse
You should just be able to "fastboot boot recovery.img" and boot CWM and then use ADB. W/O unlocking the BL
npjohnson said:
You should just be able to "fastboot boot recovery.img" and boot CWM and then use ADB. W/O unlocking the BL
Click to expand...
Click to collapse
This did not work for me. I have a Nexus 4 with a broken digitizer, locked bootloader, and usb debugging disabled. I need to grab some data off.
I've tried `fastboot flash recovery {{recovery .img}}` and `fastboot boot {{recovery .img}}` without unlocking the bootloader first, and via both methods, I get back "FAILED (remote: not supported in locked device)"
So I'm not sure how people are able to get into custom recovery without first unlocking BL/losing all their data. Can someone explain?
jinglejuice said:
This did not work for me. I have a Nexus 4 with a broken digitizer, locked bootloader, and usb debugging disabled. I need to grab some data off.
I've tried `fastboot flash recovery {{recovery .img}}` and `fastboot boot {{recovery .img}}` without unlocking the bootloader first, and via both methods, I get back "FAILED (remote: not supported in locked device)"
So I'm not sure how people are able to get into custom recovery without first unlocking BL/losing all their data. Can someone explain?
Click to expand...
Click to collapse
On some (few) Motorola devices (not nexus 4), you can fastboot boot without unlocking the BL.
Hello all! I'm having a problem with a Nexus 7.
This is my brother's tablet that he hasn't used in a few months. It hasn't been unlocked or rooted.
I can get to the boot screen with the android lying on it's back and the options with the volume buttons. The other info on that screen which might be pertinent:
Fastboot mode
Product name: grouper
variant - grouper
hw version - er3
bootloader version - n/a
serial number -
signing - not defined yet
lock stated - locked
When I go to recovery mode and push the power button, it says "booting failed" in the upper left. It still says Google in the middle, and has the options with the volume in the upper right, but the android is gone as is the text in the lower left.
I have adb and fastboot installed, but I can't seem to do much since the tablet is locked. I tried unlocking a few times, and it's always failed. Usually it doesn't give a reason, but one time I got this: "Failed (status read failed (Too many links))"
I've tried googling this and can't find someone with the same problem.
Anything I can try?
Thanks!
Nexus Tool Kit
rbeavers said:
Nexus Tool Kit
Click to expand...
Click to collapse
OK, I have that now, but I can't get very far. I think I need to enable debugging on the device first? How can I do that in that state it's in now?
swirv81 said:
OK, I have that now, but I can't get very far. I think I need to enable debugging on the device first? How can I do that in that state it's in now?
Click to expand...
Click to collapse
Anything else I can try? Not sure if I'm missing something with the tool kit, but I nothing I tried seemed to help.
swirv81 said:
Anything else I can try? Not sure if I'm missing something with the tool kit, but I nothing I tried seemed to help.
Click to expand...
Click to collapse
If you can get into the Bootloader, just run the below via ADB
Code:
fastboot oem unlock
Once you unlock the Bootloader you can use the "Soft Brick" Mode in the NRT to Re-flash back to stock and see if that will allow you to boot. You do not need debugging enabled to use the Nexus Root Toolkit if you use the Soft Brick mode, but you must have an unlocked bootloader.
ariesgodofwar said:
If you can get into the Bootloader, just run the below via ADB
Code:
fastboot oem unlock
Once you unlock the Bootloader you can use the "Soft Brick" Mode in the NRT to Re-flash back to stock and see if that will allow you to boot. You do not need debugging enabled to use the Nexus Root Toolkit if you use the Soft Brick mode, but you must have an unlocked bootloader.
Click to expand...
Click to collapse
I've tried unlocking a few times, but after a few minutes of it saying "unlocking" it fails.
swirv81 said:
I've tried unlocking a few times, but after a few minutes of it saying "unlocking" it fails.
Click to expand...
Click to collapse
What says "unlocking" (computer or tablet) and are you trying to do it through the Toolkit, or via command prompt ADB? I would first make sure your computer is seeing your tablet (ie. that the drivers and Fastboot are installed correctly). Do you know that they are?
ariesgodofwar said:
What says "unlocking" (computer or tablet) and are you trying to do it through the Toolkit, or via command prompt ADB? I would first make sure your computer is seeing your tablet (ie. that the drivers and Fastboot are installed correctly). Do you know that they are?
Click to expand...
Click to collapse
I was trying this with the command prompt. I could get fastboot to list the device when using that command. And the tablet and command prompt both say "unlocking" when doing that. I would assume that means the computer is seeing the tablet and everything is set up correctly?
I think I tried to unlock with the Toolkit, but I believe it told me that device needs to be in debugging mode.
Hey there, I'm having a similar problem.
My info is the same except my bootloader version is 4.18 and my lock state says it's unlocked. I tried to use the root kit but I'm having trouble with the fastboot device being detected. Driver solutions attempted were the google ones, and the pdanet ones. I can't really do the manual thing since that involves the device being recognized when plugged in, and since I can't enable usb debugging... anyways the automated drivers windows says were installed successfully so I don't really know what else to do.
Note: I do know the usb port on the tablet and computer work since when plugged in, it will show that its charging with the white battery icon.
Same issue here
I was in the process of upgrading manually from android 5.0 to 5.0.2 owing to the serious lag that came with lollipop. The OTA was taking longer and testing my patience as most apps were crashing due to lag.
Therefore decided to go for manual flashing of the image. I have never done this before. I was able to make the computer see my device by disabling mtp via storage under setting in the device. This is one thin I noticed to make the device visible to the computer.
After installing the device drivers my nexus was visible within the device manager but it couldn't be seen as an external storage until I played with the MTP. I had even unlocked the boot loader before all this.
So everything was going well and while I started to think all is well, I ran into this issue. From adb I tried to run 'flash-all.bat' from the new device image. Something went wrong somewhere - don't know what it is, but from then on, I am stuck in the fastboot screen or into recovery mode but when i try to boot the device bu hitting the power button - I get this message 'Booting failed'.
I am also trying to use NRToolkit but no use. When I connect my device it is seen in the device manager in my pc but cannot see it as a storage. Therefore when I now try to run the 'adb devices' command it cannot see my device. From what I saw initially, until I enable/disable mtp mode adb was not able to see my device to communicate.
Now when I tried NRT and installed the drivers once again, it is being detected in the device manager but when I run the driver test within NRT - I get a ADB device not found error. Within NRT all that it says is go into device setting>storage to enable it which I know but at the current status of my device in boot screen/recovery mode how can I go in to enable this. This is not helpful.
Somebody please suggest a workaround for this issue. I know I am close to the solution but not sure how to enable the MTP or at least made the NRToolkit to say 'ADB device found'.
My fastboot screen shows these details:
Fastboot mode
Product name grouper
Variant = grouper
HW Version – ER3
Bootloader version – 4.23
Baseband version – N/A
Serial number – 015d21d910141c0a
Signing – not defined yet
Lock State - unlocked
Please help.
Hello I am posting in Q&A because I'm a new XDA user, I was not allowed to post in the dev channel.
I have an Essential phone that has been working great for the past few years, no issues, and it was running standard build receiving OTA updates, until the very last update, which soft bricked the phone.
The phone was never enabled in developer mode while in Android, and now, I can't boot the phone into android at all. The only thing I can do is get into fastboot.
Fastboot state shows DEVICE STATE - locked
Any commands I try to unlock flashing, or change slots, anything at all, I get the error that the device is locked so all commands to unlock fail.
Is there any way to unlock device state from fastboot? I saw a youtube video showing a way to use a chopped USB cable to enter emergency / EDL mode for Qualcomm-based Android devices, but have not seen anyone post that this was successful with the Essential
Does anyone know of any method to be able to unlock flashing from fastboot? Or any other method to un-brick an essential? I've attempted everything, on both Mac and PC, nothing works.
On mac or PC, I can query the device in fastboot and get a response, I just can't do anything to unlock anything!!
Many thanks in advance for any suggestions!
Same problem
Same thing happened to me. Same day as you. I can get fastboot but not adb but since the device is locked I can't flash. I've only had the phone about 6 months so I contacted customer support and they offered to replace the phone.
It might be a known issue because they didn't even try to address the fact that I could get fastboot connected but not adb. They just offered to replace.
Thanks for the info! I am -at least in this case- unfortunately an early adopter. I bought two essentials at the beginning of the pre-release.
Essential support checked my serial number and said the phone was out of warranty.
Has anyone been able to force the Essential into EDL mode to recover that way? It looks like you have to latch one of the USB pins to ground, or 5V, but I haven't found any detailed instructions on how to make this work on the essential...
Thanks again
Justin
I'm sure things have changed and I'm wrong, but if you can get into the fastboot menu can't you just cycle through the options until you get to recovery and then flash an official release from Essential?
I may be thinking of LG or something but this should be possible as long as it's newer than the current software installed because it will see it as an official update and allow the flash.
Thanks but unfortunately, when I try and do that, the phone just does the same thing, it hangs forever on the initial boot screen white Android text with the circle/square logo...
That's why I've been looking into the more direct hardware version of forcing the phone into EDL mode, which is supposed to be possible with all Qualcomm based phones.
I've just not found the time yet to find a USB-C cable I'd be happy to cut in half and short the pins on! Which is why I was hoping someone might have tried this with an essential before to know if it was successful before I start trashing good cables
Thanks again for your reply!
JB
justinbaird said:
Hello I am posting in Q&A because I'm a new XDA user, I was not allowed to post in the dev channel.
I have an Essential phone that has been working great for the past few years, no issues, and it was running standard build receiving OTA updates, until the very last update, which soft bricked the phone.
The phone was never enabled in developer mode while in Android, and now, I can't boot the phone into android at all. The only thing I can do is get into fastboot.
Fastboot state shows DEVICE STATE - locked
Any commands I try to unlock flashing, or change slots, anything at all, I get the error that the device is locked so all commands to unlock fail.
Is there any way to unlock device state from fastboot? I saw a youtube video showing a way to use a chopped USB cable to enter emergency / EDL mode for Qualcomm-based Android devices, but have not seen anyone post that this was successful with the Essential
Does anyone know of any method to be able to unlock flashing from fastboot? Or any other method to un-brick an essential? I've attempted everything, on both Mac and PC, nothing works.
On mac or PC, I can query the device in fastboot and get a response, I just can't do anything to unlock anything!!
Many thanks in advance for any suggestions!
Click to expand...
Click to collapse
I have the exact same problem,
My phone is stuck on Essential log when I turned it on,
I can access Bootloader normally but the device is locked so I cannot flash it,
Recovery is corrupted, when I try to star it, it shows only the the Essential log and freeze so I can not format or wipe or sideload.
OEM Locked and unchecked
USB Debugging is unchecked
and I can't flash anything,
Did you managed to unlock it through Fastboot command or any other way ?
I wish I can just login to the recovery or unlock it so I can flash it clean,
Kindly help me if you found a way out
Thank you
I'll be making a video for this with the 7 inch tablet on Nov. 29th or 30th (depending on the time I have)
General Disclaimer: I'm not responsible if you brick your tablet. This is how I did it personally as other methods here didn't work for me. I have yet to test this method on a 7 inch, also do not have access to the Surf variants. This has only been tested on the 10.1 inch with the keyboard. Will update when I test with the 7 inch.
What's Needed:
MTK Fastboot Drivers: https://online.mediatek.com/Public Documents/MTK_Android_USB_Driver.zip
Magisk Manager Canary: https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
Stock Boot Image: https://forum.xda-developers.com/wa...eral/stock-stock-backups-images-otas-t3998227
ADB and Fastboot: https://www.xda-developers.com/what-is-adb/
Prerequisites:
Personally, I had issues getting my PC to recognize the tablets in Fastboot mode. The drivers wouldn't install. This might be optional for some of you, but I thought I'd include it just in case.
Installing MTK Fastboot Drivers from the link above
If you plugin your device in fastboot mode and your PC doesn't recognize it, follow these steps. If it did, skip this part.
1.) Download the drivers above and unzip the Zip file somewhere on your PC (desktop or My Documents is easiest)
2.) Boot your Tablet into Fastboot Mode by holding Vol + and Power, then select Fastboot from the Menu
*NOTE* There is a bug with these tablet's that the volume buttons are mislabeled. Really dumb, but I guess that's why they were 55 bucks for the 10 inch on black friday
3.) Plug the device into your PC and open Device Manager by pressing WinKey+R and typing devmgmt.msc, hit Enter
4.) If there's an Other Device listed called Android, follow these steps. If it isn't there, follow the next set of steps
5.) Open a Command Prompt window as Admin and type the following command
Code:
bcdedit.exe /set nointegritychecks on
6.) Hit enter, then restart your PC
7.) Once the PC is restarted, make sure your tablet is connected in Fastboot mode and open Device Manager again
8.) Right click Android under Other Devices and select Update Drivers
9.) Click the Browse my Computer for driver software button and select the MTK Folder you extracted from the download link above
10.) From there, you can open command prompt, type fastboot devices and see if your tablet shows up and move on to root!
Unlocking your Bootloader
From here, you can unlock your bootloader very easily to Root your device
This will wipe all data off the tablet!
0.) Enable OEM Unlock and USB Debugging on the tablet by going to Settings->About and tap Build Number 7 times. From here, enter the new Developer Options that unlock and turn on OEM Unlock and USB Debugging.
1.) Boot your tablet into Fastboot mode and connect it to your PC
2.) Open a Command Prompt window and type the following command, then hit enter
Code:
fastboot flashing unlock
3.) Follow the instructions on screen to unlock your bootloader
4.) Now Boot your device and we'll move on to making a rooted Boot Image
Creating a Rooted Boot Image with Magisk Manager
0.) Make sure you already have Wifi setup and connected before the first time you open Magisk Manager on your device! Make sure it auto connects as well
1.) Download Magisk Manager Canary from the link above
2.) Install it to your device
3.) Download boot Image from the Stock Boot Image part of the Prerequisites above and put the boot.img on your devices internal memory
4.) Open Magisk Manager and select Install Magisk
5.) Select Patch File and select the boot.img from your internal storage
6.) Once its done patching the image, take magisk_patched.img from the downloads folder of your device and move it onto your PC
7.) Boot your tablet into Fastboot mode and plug it into your PC
8.) Open Command Prompt and type the following command and hit enter (make sure you know your magisk_patched.img file location)
Code:
fastboot flash boot magisk_patched.img
9.) Reboot the device and you'll be Rooted!
Optional Steps like Modules and Debloating
My basic debloat script: https://forum.xda-developers.com/wa...s-general/root-walmart-bloat-remover-t4011639
Will be testing GSI roms on the spare 7 inch and will list those here
Recommended Magisk Modules:
Viper4Android Legacy
FDE.AI
MagiskHide Props Config
Systemless Hosts
Youtube Vanced Black
Magisk Setting to Enable:
Magisk Hide
Rename Magisk Manager App (keeps app from detecting magisk root)
Credits:
Myself for this root method @byproxy for reminding me to add the steps for OEM Unlock and enabling wifi before opening Magisk Manager for the first time
I'll start this off saying i'm an amateur at this, but I cannot for the life of me get an option to show up in magisk to patch the boot image even though it's on my 7" tablet. Any thoughts?
The bootloader was unlocked and it was successful so that's not the issue.
Are you online? I had the same problem.
Xavster2 said:
I'll start this off saying i'm an amateur at this, but I cannot for the life of me get an option to show up in magisk to patch the boot image even though it's on my 7" tablet. Any thoughts?
The bootloader was unlocked and it was successful so that's not the issue.
Click to expand...
Click to collapse
Xavster2 said:
I'll start this off saying i'm an amateur at this, but I cannot for the life of me get an option to show up in magisk to patch the boot image even though it's on my 7" tablet. Any thoughts?
The bootloader was unlocked and it was successful so that's not the issue.
Click to expand...
Click to collapse
Sorry, been a busy few days, but make sure you're connected to Wifi, close Magisk Manager, then reopen it and you'll be good to go!
Onn 8" walmart tablet
I purchased the 8" Onn walmart tablet second hand from a store called dirt cheap. Box didnt look to be opened but it had been. The tablet had been setup with someones gmail account that i do not know. The tablet was for a 4yo girl to use to learn preschool. Is there just any simple way to remove this google FRP lock ? I dont care if i lose the info on it as its not mine. I just want her to be able to use the tablet. Any help would be much appreciated please
CoachDad said:
I purchased the 8" Onn walmart tablet second hand from a store called dirt cheap. Box didnt look to be opened but it had been. The tablet had been setup with someones gmail account that i do not know. The tablet was for a 4yo girl to use to learn preschool. Is there just any simple way to remove this google FRP lock ? I dont care if i lose the info on it as its not mine. I just want her to be able to use the tablet. Any help would be much appreciated please
Click to expand...
Click to collapse
Forced factory reset should do it. There is small pin hole near the power button. I believe pressing this hidden button(with a Sim card ejector, or paper clip).
If pressing does not do anything. Maybe press the button then hold power button too
mrmazak said:
Forced factory reset should do it. There is small pin hole near the power button. I believe pressing this hidden button(with a Sim card ejector, or paper clip).
If pressing does not do anything. Maybe press the button then hold power button too
Click to expand...
Click to collapse
Thank you for responding so fast. I've boot into recovery mode /wiped everything...its back to factory. The pinhole reset button does nothing other than reboot it . Ive tried all combos to with the reset button but nothing. Also i've read that its possible to use odin? if i can get it into download mode.
Ive downloaded the stock rom posted on an sdcard wondering if i can possibly update in recovery mode? Im sorta a newb at this stuff. I've been reading for 4 days on this matter. I've practiced a root on an old tablet with success. I guess at this point unless i can sell it as is giving the customer that it has this frp lock on it. If the know how to fix it so be it. Im not sure there is a working solution for frp bypass on these tablets.
CoachDad said:
Thank you for responding so fast. I've boot into recovery mode /wiped everything...its back to factory. The pinhole reset button does nothing other than reboot it . Ive tried all combos to with the reset button but nothing. Also i've read that its possible to use odin? if i can get it into download mode.
Ive downloaded the stock rom posted on an sdcard wondering if i can possibly update in recovery mode? Im sorta a newb at this stuff. I've been reading for 4 days on this matter. I've practiced a root on an old tablet with success. I guess at this point unless i can sell it as is giving the customer that it has this frp lock on it. If the know how to fix it so be it. Im not sure there is a working solution for frp bypass on these tablets.
Click to expand...
Click to collapse
This is an mtk device not Samsung. So there is no Odin or download mode. There is spflash tool, and preloader.
And if you flash firmware (with default frp partition) then frp lock is cleared.
But you will have to find that file. It maybe in the stock firmwares that are shared, I do not know.
EDIT:
i was having issues but figure it out. maybe it should be so common knowledge that it shouldn't need to be included as a step, but since i don't do this THAT often i didn't think about it and it took me a bit to figure out why i was having issues.
once you get your computer to recognize your device (mine did without needing to mess with any drivers) you need to first make sure to got into the tablet settings -> about and then tap on the build number 7 times to access developer options. then you need to go into developer options and turn on OEM Unlocking & USB Debugging.
THEN follow the guide to unlock bootloader.
then (since the tablet is factory reset once you unlock) do the above AGAIN to turn USB Debugging back on after you reboot.
also note that you need to have an internet connection on the tablet to utilize magisk. once you got all that square, then continue on with steps for full root.
hope that helps!
byproxy said:
EDIT:
i was having issues but figure it out. maybe it should be so common knowledge that it shouldn't need to be included as a step, but since i don't do this THAT often i didn't think about it and it took me a bit to figure out why i was having issues.
once you get your computer to recognize your device (mine did without needing to mess with any drivers) you need to first make sure to got into the tablet settings -> about and then tap on the build number 7 times to access developer options. then you need to go into developer options and turn on OEM Unlocking & USB Debugging.
THEN follow the guide to unlock bootloader.
then (since the tablet is factory reset once you unlock) do the above AGAIN to turn USB Debugging back on after you reboot.
also note that you need to have an internet connection on the tablet to utilize magisk. once you got all that square, then continue on with steps for full root.
hope that helps!
Click to expand...
Click to collapse
I did not realize I didn't include that step. Total noob mistake when typing a tutorial up for android. I do this almost daily at work, so I forget to include it
CoachDad said:
Thank you for responding so fast. I've boot into recovery mode /wiped everything...its back to factory. The pinhole reset button does nothing other than reboot it . Ive tried all combos to with the reset button but nothing. Also i've read that its possible to use odin? if i can get it into download mode.
Ive downloaded the stock rom posted on an sdcard wondering if i can possibly update in recovery mode? Im sorta a newb at this stuff. I've been reading for 4 days on this matter. I've practiced a root on an old tablet with success. I guess at this point unless i can sell it as is giving the customer that it has this frp lock on it. If the know how to fix it so be it. Im not sure there is a working solution for frp bypass on these tablets.
Click to expand...
Click to collapse
I was able to remove FRP lock on one of mine by flashing the stock rom with SP Flash Tool. I used the full wipe and download selection with every partition selected including boot.
no worries! i didn't think about it either until i was having issues. thanks for the tutorial... it was super helpful!! btw it definitely works on the 8" tablet.
Hello! I'm new to all of this, but what I'm trying to accomplish is removing the Google account from this tablet and putting a new image on the ONA19TB002, ONA19TB003, ONA19TB007, Surf 7 and 10 tablets. I followed all of the steps as far as installing the drivers. I had to go through hoops to get the MediaTek Drivers installed, but I have a "warning" cone by it. I haven't been able to find any resolution to this. Any help would be appreciated. I' have a Windows 10 64-bit system that I'm using and the tablet I'm specifically working on at the moment is the ONN ONA19TB003 tablet. The tablet is not being recognized by my laptop when I run the 'fastboot devices' command in PowerShell. Is there something that I'm missing? Any help would be appreciated.
'Quis said:
Hello! I'm new to all of this, but what I'm trying to accomplish is removing the Google account from this tablet and putting a new image on the ONA19TB002, ONA19TB003, ONA19TB007, Surf 7 and 10 tablets. I followed all of the steps as far as installing the drivers. I had to go through hoops to get the MediaTek Drivers installed, but I have a "warning" cone by it. I haven't been able to find any resolution to this. Any help would be appreciated. I' have a Windows 10 64-bit system that I'm using and the tablet I'm specifically working on at the moment is the ONN ONA19TB003 tablet. The tablet is not being recognized by my laptop when I run the 'fastboot devices' command in PowerShell. Is there something that I'm missing? Any help would be appreciated.
Click to expand...
Click to collapse
Personally, I avoid PowerShell at all costs. This kinda stuff has always just seemed to work better with CMD.exe instead of Powershell.
These tablets are kind of a nightmare for this. If you've done the mediatek drivers and still have the warning cone icon, I'm not sure what's next as I haven't hit that wall myself. All I can maybe recommend is right click delete drivers in Device Manager, then start over with the driver install
Removing the Google Account would be needing a FRP Bypass. Someone above stated "I was able to remove FRP lock on one of mine by flashing the stock rom with SP Flash Tool. I used the full wipe and download selection with every partition selected including boot. " so if you can get it recognized, try that
KaptinBoxxi said:
Personally, I avoid PowerShell at all costs. This kinda stuff has always just seemed to work better with CMD.exe instead of Powershell.
These tablets are kind of a nightmare for this. If you've done the mediatek drivers and still have the warning cone icon, I'm not sure what's next as I haven't hit that wall myself. All I can maybe recommend is right click delete drivers in Device Manager, then start over with the driver install
Removing the Google Account would be needing a FRP Bypass. Someone above stated "I was able to remove FRP lock on one of mine by flashing the stock rom with SP Flash Tool. I used the full wipe and download selection with every partition selected including boot. " so if you can get it recognized, try that
Click to expand...
Click to collapse
Ok, thank you! This is a shot in the dark, but in order for ADB to work, USB debugging has to be enabled. I can't do that as the tablet is locked by FRP and I have looked countless times on Google and MSN to see if it's possible. Do you have any tips for that?
I don't know what I'm doing wrong, but for some reason I can't seem to get. The tablet to stay in fastboot mode. It just says waiting for device.
will this root onn 8 inch tablet running android 9
soateufel said:
I don't know what I'm doing wrong, but for some reason I can't seem to get. The tablet to stay in fastboot mode. It just says waiting for device.
Click to expand...
Click to collapse
Sorry for late reply. Been away from home with work. When fastboot mode indicates "waiting for device," it generally means that your device is not properly communicating with your PC or laptop. This is nearly always due to missing or incorrect drivers 9n your computer. There are several comprehensive guides here on XDA for installing necessary ADB & Fastboot drivers.
installed magisk manager on onn 8 and also have img zip but win i go to patch it magisk manager crashes
when you mean patch boot img do mean to unzip file on onn 8
Hello...
I am looking for a working way to root my SM-T555
The device is running android 7.1.1;
base ver. "T555XXU1CQHA";
build ver. "NMF26X.T555XXU1CRG1";
Samsung experience 8.5;
Android security patch August 2017.
So far, the several attempts I made using every T55X related software I found in this website have been unsuccessful.
It would seem that the rooting software available is for "Marshmallow only", thus not Nougat specific,
though I read some comments stating that the TWRP made for MM worked on Nougat too and, after that, Magisk would/could do the job...
So I gave it a try but, after installing the recovery, my tablet got stuck every time: refused to boot normally
and if I turned it off, long pressing the power key, I couldn't turn it on again as if it was bricked.
Every time I had to re-start it in download mode and re-flash the original stock rom with Odin in order to have it working again.
On top of that, the "OEM unlock" key is not present in the developer mode list: none of the "date changing tricks" I found around the web seems to fit this model.
I am inclined to believe this "might" be the mother of my problems in rooting the device though, supposedly, the patches were not for Nougat, anyway...
The developer options page, once activated, can only be "turned off" ("greyed out") but cannot be deactivated;
while, on other devices, if you turn it off the page usually disappears after rebooting then you have to tap 7 times the build version, again, in order to make it appear.
I never had problems in rooting any of the phones and tablets I have /had, including an SM-T819 running Nougat 7.1.1,
thanks to the great job done by the coders in this community to whom I would like to express my appreciation for what they do for the benefit of us all.
But this thing seems to reject everything I throw at it and it's been the most stubborn "phone like object" I ever fought with.
So far I am the one loosing the fight... I wish some of you guys could give me the means to defeat it.
Thanks in advance to whoever may be available to help me out.
Flash TWRP, then install Magisk in TWRP.
V0latyle said:
Flash TWRP, then install Magisk in TWRP.
Click to expand...
Click to collapse
thanks for your reply.
maybe my post was too long and boring so you didn't read it all
Of course I already tried the solutions posted in the page you suggested but they did not work.
not the autoroot files, not the recovery, etc...
I quote: "after installing the recovery, my tablet got stuck every time: refused to boot normally
and if I turned it off, long pressing the power key, I couldn't turn it on again as if it was bricked.
Every time I had to re-start it in download mode and re-flash the original stock rom with Odin in order to have it working again."
If there is a TWRP file specific for my Nougat version available I'd be happy to give it a shot
endlessquest said:
thanks for your reply.
maybe my post was too long and boring so you didn't read it all
Of course I already tried the solutions posted in the page you suggested but they did not work.
not the autoroot files, not the recovery, etc...
I quote: "after installing the recovery, my tablet got stuck every time: refused to boot normally
and if I turned it off, long pressing the power key, I couldn't turn it on again as if it was bricked.
Every time I had to re-start it in download mode and re-flash the original stock rom with Odin in order to have it working again."
If there is a TWRP file specific for my Nougat version available I'd be happy to give it a shot
Click to expand...
Click to collapse
Did you follow a guide when flashing TWRP? Did you unlock your bootloader?
You need to be clear and concise in your posts as yo what you did and how.
V0latyle said:
Did you follow a guide when flashing TWRP? Did you unlock your bootloader?
You need to be clear and concise in your posts as yo what you did and how.
Click to expand...
Click to collapse
of course I did follow the guide by the book. also, the recovery appears to be installed properly, Odin showing a nice green PASS sign, but it doesn't work anyway
now about unlocking the bootloader, as I mentioned in my first post:
"the "OEM unlock" key is not present in the developer mode list: none of the "date changing tricks" I found around the web seems to fit this model.
I am inclined to believe this "might" be the mother of my problems in rooting the device"
every time I had to re install the system, so there clock want back to zero. Maybe I should be waiting for the allotted number of days to pass on order for the OEM unlock key to appear...
but before my first attempt to root the device, almost one month was past and the OEM unlock key wasn't there, notwithstanding...
I hope there was a chance that the bootloader was already unlocked...
to be concise (schematic):
tablet in download mode
untick auto reboot in Odin
AP loaded with "smt550_cf-autoroot.tar"
flash with Odin, OK, green sign PASS
reboot manually home+volume down+power,
then switch to volume up when screen becomes black
the Samsung logo appears and stays there indefinitely
So I turn the device off, long pressing the power key
then I try and turn on the tablet but does not turn on anymore,
not even pressing the power button for 30 second
then I press home+volume down+power again
to enter download mode and reinstall stock rom
(the same happens with
sm-t550_p550_p555_cf-autoroot.tar
or twrp_3.0.2-1_sm-t550_mm_7816.tar,
I also tried
twrp_3.1.1-1_sm-t355_251117
remark: none of them mentions T555 nougat)
Put your tablet in Download Mode and take a picture of the text at the upper left of the screen.
V0latyle said:
Put your tablet in Download Mode and take a picture of the text at the upper left of the screen.
Click to expand...
Click to collapse
What process did you follow to unlock your bootloader?
Stop trying to use Autoroot. Let's figure out what we need to do to get TWRP on your device. Once we do that, you can flash Magisk in TWRP for root.
Please read this guide, sections 1 through 4 (don't worry about the GSI stuff) and tell me what you have or have not done.
ok, I wasn't able to do this:
Unlock Bootloader
Enable Developer Options and turn on OEM Unlocking
OEM Unlocking is missing in the list, as I mentioned in my previous posts
I tried the date change trick but it didn't work
endlessquest said:
ok, I wasn't able to do this:
Unlock Bootloader
Enable Developer Options and turn on OEM Unlocking
OEM Unlocking is missing in the list, as I mentioned in my previous posts
I tried the date change trick but it didn't work
Click to expand...
Click to collapse
This is the first step. You cannot flash custom or modified images if the bootloader is locked.
Connect to the Internet and check for updates in system options, then check Developer Options again.
I did that step too, several times:
the system found an update available
the first times I cancelled the download
then I downloaded the update without installing it
then I tried and installed it
no result at all the attempts: the OEM Unlock key does not appear in developer options
endlessquest said:
I did that step too, several times:
the system found an update available
the first times I cancelled the download
then I downloaded the update without installing it
then I tried and installed it
no result at all the attempts: the OEM Unlock key does not appear in developer options
Click to expand...
Click to collapse
Has it ever appeared before?
V0latyle said:
Has it ever appeared before?
Click to expand...
Click to collapse
it is the first time I work on this specific device, so I couldn't tell: so far I couldn't find the OEM unlock option in the list
it never happened before on any of the several devices I have rooted in my life,
included another Samsung tablet SM-T819 running Nougat 7.1.1: the option was right there and all I had to do is tick it.
I used fastboot for other brands
I wish there was a way to use fastboot to unlock the bootloader on Samsung
if there is any I don't know it
adb is working, but when I give the "adb reboot fastboot" command, the tablet enters the download mode and fastboot does not see the tablet anymore from the computer
endlessquest said:
it is the first time I work on this specific device, so I couldn't tell: so far I couldn't find the OEM unlock option in the list
it never happened before on any of the several devices I have rooted in my life,
included another Samsung tablet SM-T819 running Nougat 7.1.1: the option was right there and all I had to do is tick it.
I used fastboot for other brands
I wish there was a way to use fastboot to unlock the bootloader on Samsung
if there is any I don't know it
adb is working, but when I give the "adb reboot fastboot" command, the tablet enters the download mode and fastboot does not see the tablet anymore from the computer
Click to expand...
Click to collapse
Samsung devices do not have a fastboot mode.
Since this is a Snapdragon device, it probably cannot be unlocked, especially if it was marketed in the US.
Only Exynos and international Snapdragon devices can be unlocked, unfortunately.
V0latyle said:
Samsung devices do not have a fastboot mode.
Since this is a Snapdragon device, it probably cannot be unlocked, especially if it was marketed in the US.
Only Exynos and international Snapdragon devices can be unlocked, unfortunately.
Click to expand...
Click to collapse
actually I am in Rome, Italy so I am quite positive it was marketed here...
is there a way to know for sure whether or not it is international?
the Samsung SM-T819 I am writing from has a snapdragon chip
but I had no problem unlocking/rooting it,
I bought both the devices here in Rome
now that's a mystery...
endlessquest said:
actually I am in Rome, Italy so I am quite positive it was marketed here...
is there a way to know for sure whether or not it is international?
Click to expand...
Click to collapse
Usually the model number is a good indication with phones - the G908U vs G908N for example, but I don't see that being the case here
Have you tried signing into a Samsung or Google account on the device before checking for updates and looking for OEM Unlocking?
V0latyle said:
Usually the model number is a good indication with phones - the G908U vs G908N for example, but I don't see that being the case here
Have you tried signing into a Samsung or Google account on the device before checking for updates and looking for OEM Unlocking?
Click to expand...
Click to collapse
I did that too...
on a freshly installed rom:
I connected the internet thru wireless
signed into my Google account
completed the tablet configuration, etc
then I went and enable the developer options
no OEM Unlocking yet again...
endlessquest said:
I did that too...
on a freshly installed rom:
I connected the internet thru wireless
signed into my Google account
completed the tablet configuration, etc
then I went and enable the developer options
no OEM Unlocking yet again...
Click to expand...
Click to collapse
You manually checked for an update too?
Did you try disconnecting from the Internet, disabling network time, and manually setting the time ahead 1 week?