Related
After Android tried to update itself to the newest version, it seemed that this failed and has caused a "boot failed" message. The tablet refuses to go into recovery mode, its marked as red. The only accessible mode is going into bootloader. After reading many forums and trying my luck with toolkits of all sorts (Nexus 7 Root Toolkit, Nexus Root Toolkit, Android SDK commands), the bootloader refuses to unlock. I have successfully installed the usb drivers since my pc recognizes the device. fastboot devices recognizes the devise but adb devices doesn't. The bootloader is locked and nothing else is accessible, whats worse is that through all of these toolkits and commands bootloader refuses to unlock, trying to unlock it always results in a failure message (unknown error). Commands such as format, unlock or erase fail in reviving the system. Anyone have any experience with this? I have searched for over a week now and im terribly frustrated by this. :silly:
AndiS21 said:
After Android tried to update itself to the newest version, it seemed that this failed and has caused a "boot failed" message. The tablet refuses to go into recovery mode, its marked as red. The only accessible mode is going into bootloader. After reading many forums and trying my luck with toolkits of all sorts (Nexus 7 Root Toolkit, Nexus Root Toolkit, Android SDK commands), the bootloader refuses to unlock. I have successfully installed the usb drivers since my pc recognizes the device. fastboot devices recognizes the devise but adb devices doesn't. The bootloader is locked and nothing else is accessible, whats worse is that through all of these toolkits and commands bootloader refuses to unlock, trying to unlock it always results in a failure message (unknown error). Commands such as format, unlock or erase fail in reviving the system. Anyone have any experience with this? I have searched for over a week now and im terribly frustrated by this. :silly:
Click to expand...
Click to collapse
do it the right way, dont use toolkits.
to unlock the bootloader, go into the bootloader(fastboot), connect the divice via usb, type..
fastboot devices(to make sure your device is visable)
fastboot oem unlock(to unlock the bootloader)
if you get an error, reboot the bootloader and try again. i had an error the first time on my replacement seven, second time it unlocked.
simms22 said:
do it the right way, dont use toolkits.
to unlock the bootloader, go into the bootloader(fastboot), connect the divice via usb, type..
fastboot devices(to make sure your device is visable)
fastboot oem unlock(to unlock the bootloader)
if you get an error, reboot the bootloader and try again. i had an error the first time on my replacement seven, second time it unlocked.
Click to expand...
Click to collapse
Thanks for the reply, i tried this several times, each time rebooting bootloader, but the command still posts an error in unlocking the bootloader. Recovery and Restart bootloader are marked in red font, Start is in Green, Power off White. I also tried flashing the recovery, since its inaccessible but because of bootloader being locked in won't allow me. :S Anything else you know that can be done ?
Reflash the bootloader?
edit: making VERY sure that you DON'T erase the existing bootloader first.
Try a manual update
AndiS21 said:
After Android tried to update itself to the newest version, it seemed that this failed and has caused a "boot failed" message. The tablet refuses to go into recovery mode, its marked as red. The only accessible mode is going into bootloader. After reading many forums and trying my luck with toolkits of all sorts (Nexus 7 Root Toolkit, Nexus Root Toolkit, Android SDK commands), the bootloader refuses to unlock. I have successfully installed the usb drivers since my pc recognizes the device. fastboot devices recognizes the devise but adb devices doesn't. The bootloader is locked and nothing else is accessible, whats worse is that through all of these toolkits and commands bootloader refuses to unlock, trying to unlock it always results in a failure message (unknown error). Commands such as format, unlock or erase fail in reviving the system. Anyone have any experience with this? I have searched for over a week now and im terribly frustrated by this. :silly:
Click to expand...
Click to collapse
You can try a manual update. Download the update and run adb sideload. That was not working for me, cause my Nexus it's allready updated, but hopefully it will work for you.
dave_uk said:
Reflash the bootloader?
edit: making VERY sure that you DON'T erase the existing bootloader first.
Click to expand...
Click to collapse
fortunatley though bootloader doesn't allow any command even the erase, it wouldn't allow me, nor formatting it as well. So i think the bootloader is intact. This is the screen i get from pressing Power and Vol Down.
pettymro said:
You can try a manual update. Download the update and run adb sideload. That was not working for me, cause my Nexus it's allready updated, but hopefully it will work for you.
Click to expand...
Click to collapse
As i have come to learn, adb can only function when debugging is enabled, in my device it wasn't unabled. Also the recovery program cannot be opened so sideloading through commands cannot be done. At least according to how some forums described the How To sideload through adb
try do it on another pc
AndiS21 said:
Thanks for the reply, i tried this several times, each time rebooting bootloader, but the command still posts an error in unlocking the bootloader. Recovery and Restart bootloader are marked in red font, Start is in Green, Power off White. I also tried flashing the recovery, since its inaccessible but because of bootloader being locked in won't allow me. :S Anything else you know that can be done ?
Click to expand...
Click to collapse
Can you post here the error message?
Israafiyl said:
Can you post here the error message?
Click to expand...
Click to collapse
Sure here it is. When i type in fastboot oem unlock, the message to unlock on my nexus comes up and when i click yes to unlock does the procedure start and end with failure.
AndiS21 said:
Sure here it is. When i type in fastboot oem unlock, the message to unlock on my nexus comes up and when i click yes to unlock does the procedure start and end with failure.
Click to expand...
Click to collapse
I don't know if fastboot let you flash the stock bootloader/recovery without unlocking but you may try:
fastboot flash bootloader bootloader-grouper-3.34.img
fastboot flash recovery recovery-stock-jro03d-nakasi.img
Israafiyl said:
I don't know if fastboot let you flash the stock bootloader/recovery without unlocking but you may try:
fastboot flash bootloader bootloader-grouper-3.34.img
fastboot flash recovery recovery-stock-jro03d-nakasi.img
Click to expand...
Click to collapse
thanks for the files, but bootloader won't allow me to change a single thing on it. Trying to flash recovery or the bootloader results in Failure result:bootloader locked!. :S
AndiS21 said:
thanks for the files, but bootloader won't allow me to change a single thing on it. Trying to flash recovery or the bootloader results in Failure result:bootloader locked!. :S
Click to expand...
Click to collapse
try one more time with a different port/pc if it daesn't work it may be a hardware fault, i think a corrupted sd.
(you will have to send it to warranty but don't worry, asus have a really good assistence, you may have a new nexus in a less than 2 days)
Manual update
AndiS21 said:
As i have come to learn, adb can only function when debugging is enabled, in my device it wasn't unabled. Also the recovery program cannot be opened so sideloading through commands cannot be done. At least according to how some forums described the How To sideload through adb
Click to expand...
Click to collapse
Use the volume up/down keys to navigate to "Recovery mode", then press the power button.
When the Android with the red exclamation point appears, hold down power first, followed quickly by volume down and volume up. (So that to start, you're holding down power, then you're holding down all three). After 2-3 seconds, release all three keys.
Use the volume up/down keys to select "apply update from ADB," then press power to select it.
On your computer, open up a command prompt or terminal window.
Using the command line, navigate to the folder containing the ADB executables and the update file.
type:
adb.exe sideload <update filename>
On my Nexus with Jelly 4.2 usb debugging is not enabled too, but I still get the option in recovery mode menu. Operation not succesful cause I cannot upgrade from 4.2 to 4.2. I will wait for another update and then try it again. Good luck!
Israafiyl said:
try one more time with a different port/pc if it daesn't work it may be a hardware fault, i think a corrupted sd.
(you will have to send it to warranty but don't worry, asus have a really good assistence, you may have a new nexus in a less than 2 days)
Click to expand...
Click to collapse
I tried it on the laptop too, even changed the drivers to universal naked drivers, but nothing! Restart bootloader is with red, clicking it wont reboot the tablet, also recovery mode red, the only working button is the Start (green) but that leads to boot failure and power off.
pettymro said:
Use the volume up/down keys to navigate to "Recovery mode", then press the power button.
When the Android with the red exclamation point appears, hold down power first, followed quickly by volume down and volume up. (So that to start, you're holding down power, then you're holding down all three). After 2-3 seconds, release all three keys.
Use the volume up/down keys to select "apply update from ADB," then press power to select it.
On your computer, open up a command prompt or terminal window.
Using the command line, navigate to the folder containing the ADB executables and the update file.
type:
adb.exe sideload <update filename>
On my Nexus with Jelly 4.2 usb debugging is not enabled too, but I still get the option in recovery mode menu. Operation not succesful cause I cannot upgrade from 4.2 to 4.2. I will wait for another update and then try it again. Good luck!
Click to expand...
Click to collapse
recovery mode cannot be opened, the text font is red on the tablet and clicking it does nothing. :S
Also tried to completley flash the device but unable to. Going back and doing an fastboot oem unlock yields the same feedback.
Unlock Bootloader on 4.2
Hello, I was wondering if the bootloader in 4.2 can be unlocked the same way as it was on 4.1.2? I recently got a new nexus 7 and updated to 4.2.
Thanks and Cheers!
After some research into my issue, i have discovered that other users have posted "unbricking" solutions through a program called nvflash, when the device is put in APX mode. But unfortunatley i've yet to find a nvflash solution for nexus 7. I will experiment with the commands and what the others have reported as a solution.
ErnestoV31 said:
Hello, I was wondering if the bootloader in 4.2 can be unlocked the same way as it was on 4.1.2? I recently got a new nexus 7 and updated to 4.2.
Thanks and Cheers!
Click to expand...
Click to collapse
Yes it can.
Sent from my GT-I9300 using Tapatalk 2
[Q] New Nexus 7, Win 7, Nexus 7 Toolkit can't boot into Fastboot, "Too Many Links"
SOLVED!
So I went ahead, tried flashing the stock recovery, no joy (no recovery menu at all - just a bad-android image). After a while, tried flashing CWM touch (via Toolkit) - and now it's working. So, everything seems good now.
----------------
UPDATE 5 - PARTIALLY SOLVED:
So, after the last couple of things, I began to suspect bad hardware, as I alluded in those updates. And I was right.
But... it wasn't the hardware you might have thought.
It was...
(this is embarrassing)
The USB cable.
Yes, the USB cable. It was the wild variations in recognizing the fastboot mode that made me suspicious. Replaced the USB cable with another one and... stability, achieved. Unlock, root, recovery program and SU program all went without a hitch. In fastboot mode, for the first time, the device serial number shows.
HOWEVER - things are not perfect. The recovery mode from the bootloader still gives the bad-android icon.
I just used the toolkit to reflash stock recovery back to the device. This completed rapidly, without error. I then tried the recovery option in the bootloader, but again, no joy.
So at this point, I point a finger partly at the tools used to flash this - they claim there is no problem, yet the flash doesn't take at all, and no error is given. As a sometimes firmware developer, I'm used to flash being followed up by a checksum or other test to verify success of the flash. Is that not being done (shame, if not). If it is, then apparently the flash works, but the software being flashed doesn't? The stock recovery???
Any ideas on how to get this back? I just did the full unlock, which wiped all user data, and proceeded from there. I now have a solid connection, but don't really know how to get things back.
Perhaps I need to manually reinstall 4.2.2?
----------------
UPDATE 4:
So, on a lark, from fastboot in Android, I selected the "Recovery" option - it starts to boot that, then gives the Android with red triangle and exclamation point. So, looks like the recovery was toasted.
This was a brand new device earlier today. It has been completely wiped twice, and none of this has gone away. Seriously: bad device?
-----------------------
UPDATE 3:
So, I thought I'd try the direct approach, as outlined here:
http://forum.xda-developers.com/showthread.php?t=1741395
Device is in Fastboot, Device Manager shows it as ok.
I run fastboot flash recovery <file> -- and IMMEDIATELY get "fastboot has stopped working" - that's right, a hard crash in fastboot. And this is repeatable.
Am I wrong in thinking this looks more and more like a driver problem? I note that fastboot is recognized as a device maybe half the time - the other half, it gets an exclamation point in Device Manger. All I do then is restart the bootloader using the bootloader menu, and usually it fixes right up. But that's obviously a huge red flag, as the device should be recognized every time.
Is this a defective Nexus? The only thing that seems dicey is anything relating to fastboot/bootloader (which is, however, unlocked - or at least it says it is).
----------------
UPDATE 2: Using the "restart bootloader" in fastboot results in slightly worse non-recognition of the device. When I do that, I get a straight "USB Device Not Recognized" from windows - the device manager doesn't even show "Android Phone" as a class of device in this case.
---------------------
UPDATE 1: I found the thread talking about missing entries in the INF file. I added these, and got a somewhat, but not entirely, stable recognition of the Nexus 7 when in fastboot mode. Basically, sometimes it is recognized, other times it is not. By "recognized", I mean that the Windows Device Manager shows the device as "Android Bootloader Interface", with no indication of a problem (which it only does in fastboot mode - it shows as a composite ADB device when booted normally).
However - it seems it fails to recognize fastboot about half the time, although it seems that that is related to reboots - that is, a fresh boot, then going to fastboot through adb seems to work. But restarting fastboot manually fails to be recognized (Windows shows a bang by the "Android Bootloader Interface", and says the device "failed to start").
So, using 4.3.5 Nexus 7 toolkit, I tried to unlock the bootloader. Windows recognized fastboot mode, but the process errored out anyway, after maybe 15 seconds, saying "Too Many Links" - the same error as before.
Again, brand new 32gb wi-fi-only Nexus 7, with 4.2.2 update and the most basic configuration only (dev mode, usb on, etc.)
Any ideas?
-------------------------------------------------------
ORIGINAL
So this is a new, out of the box nexus 7. The only setup has been to connect to wifi, update to 4.2.2, and enable developer mode and USB debugging.
Running latest paid-for toolkit - Update 29 Feb 13, version 4.3.5
Just about everything requires the insecure fastboot, but every time I try any operation that attempts it, I get:
Booting into fastboot mode
downloading 'boot.img' ...
FAILED <status read failed <Too many links>>
I basically can't do anything - in this case, I was trying to backup.
It is being done on 64-bit win7 system that had drivers, and worked for another nexus 7 a couple months ago. But, just to be safe, I uninstalled the drivers, rebooted, and installed.
However, I see this on the home page of the toolkit:
FASTBOOT MODE [If serial shows, drivers are installed]
List of Devices attached
ADB Mode
List of devices attached
<numeric code> device
From this, it seems I should expect the word "serial" to show up if the drivers are installed?
I then unplugged the Nexus, refreshed the menu, and both Fastboot and ADB show no devices.
I then plug in the nexus - I get the usual two tone "device attached" sound, no warning or error message from Windows.Checking the Windows device manager, I see a section "Android Phone" with the entry "Android Composite ADB Interface". There are no unknown devices, which would seem then that drivers are working.
So, another refresh of the main menu, and again, I see, under ADB MODE, a single device ID number, and the word "device".
I don't know what to make of this. Apparently, per the "if serial shows" message in the main menu, drivers a NOT installed. But according to Windows, they are.
This perhaps matches the fastboot failure.
Should I see "serial"?
In any case, what do I do to get the drivers to work properly if they aren't?
And if they ARE working, then what is wrong with fastboot?
At this point, I think the toolkit is broken, and worked a couple months ago.
No, you should not see "serial". Your devices serial number should be displayed under whichever path is valid at that time. If you are in the bootloader, your device serial number should be under "fastboot". If you are booted normally, your device serial number should be under "ADB".
I used this guide:
http://forum.xda-developers.com/showthread.php?t=1741395&highlight=guide
Erik.Leach said:
No, you should not see "serial". Your devices serial number should be displayed under whichever path is valid at that time. If you are in the bootloader, your device serial number should be under "fastboot". If you are booted normally, your device serial number should be under "ADB".
I used this guide:
http://forum.xda-developers.com/showthread.php?t=1741395&highlight=guide
Click to expand...
Click to collapse
I've since figured that out. There was nothing at all, when in fastboot mode, only ADB. But then I found the thread describing two missing INF entries. I added those, updated the driver, and now the fastboot mode (which wasn't even recognized by windows) is now ok in the Device Manager. However, in the main menu, it shows, literally, "??????????" instead of a serial number - that is, there are question marks instead of serial number, Following that, a few spaces and then "fastboot".
Apparently, there are still inadequacies in the driver as relates to very, very new models running 4.2.2 (which this is).
BTW, I do believe I read somewhere that the stock recovery initially comes up with just the android on his back with the warning sign. You then have to hold power and tap volume up or something like that and the recovery menu becomes visible. I could be wrong, I know I had to do this on my old GNex, and those were the steps that worked.
Erik.Leach said:
BTW, I do believe I read somewhere that the stock recovery initially comes up with just the android on his back with the warning sign. You then have to hold power and tap volume up or something like that and the recovery menu becomes visible. I could be wrong, I know I had to do this on my old GNex, and those were the steps that worked.
Click to expand...
Click to collapse
Interesting. I did re-flash the stock recovery, and could get that without the android image.
stickplayer said:
Interesting. I did re-flash the stock recovery, and could get that without the android image.
Click to expand...
Click to collapse
That may have been a GNex thing that I am remembering. Either way, I'm glad you got everything all straightened out. :good:
I'm still kinda new at this stuff too, but if you need any more help, feel free to hit me up. Even if I don't know the answer to the question, I'll help you find it.
Erik.Leach said:
That may have been a GNex thing that I am remembering. Either way, I'm glad you got everything all straightened out. :good:
I'm still kinda new at this stuff too, but if you need any more help, feel free to hit me up. Even if I don't know the answer to the question, I'll help you find it.
Click to expand...
Click to collapse
Thanks! Next is trying to put 4.x on a Samsung Vibrant.
SOLVED
See my most recent post in this thread
______________________________________________________________________________________
Firstly, I've spent the last three days scouring XDA and some other forums searching for solutions and trying various options.
The screen on my N4 has cracked and I've lost the use of the bottom half of the touchscreen. This means that I can't unlock my phone.
The phone is insured and will be repaired, but there are photos of my son's first birthday on the internal memory that I don't want to lose. I'm concerned that the phone will be factory reset during a repair or I'll receive a replacement. I'm trying to access the internal memory remotely to backup these files before I send the phone off. The problem is that I hadn't enabled USB debugging before the accident. The phone is completely stock including the bootloader.
So I can access via fastboot but not via adb.
Q1: Can I pull file from the internal memory via fastboot
Q2: Can I enable usb debugging via fastboot
Q3: The phone is set to display as an MTP device in windows but as I can't unlock the screen, none of the files are showing. Is there anyway around this?
Q4: Purely via fastboot, can I unlock the bootloader, install CWM so to use ADB within it and then return to a stock bootloader?
I think they're my options. Any answers to the above or alternatives would be appreciated.
All of the other threads regarding this, the users seem to either already have CWM installed or they're looking to perform a factory reset. I did consider resetting the device via the bootloader in order to bypass the screenlock but I understand that on the N4 this wipes the internal memory as well.
Unlocking the device isn't needed to pull the files from it, just plug it in and get what you need from the internal memory
EddyOS said:
Unlocking the device isn't needed to pull the files from it, just plug it in and get what you need from the internal memory
Click to expand...
Click to collapse
On mine if I plug it in it appears as an MTP device but with no files. I then have to unlock the screen and select USB something-or-other from the notificationss bar, then the files appear in windows.
Strange, mine never needs to be unlocked...I'm using Windows 8 Pro btw but it also works fine in work on Vista Business
Only other thing I can think of is the fact I'm unlocked and running a custom ROM, I've never used my N4 stock. It was on CM within 30 mins of receiving the unit!
So over the last week I've managed to solve my problem. I've seen several other people asking for help with no luck so I'm posting this here in the hope that the search function will bring it up.
Firstly, my phone was completely stock running 4.2.2, unrooted, with the locked stock bootloader. USB Debugging WAS NOT enabled. I had pattern lock enabled when I dropped the phone. The screen cracked and the bottom half of the touchscreen was unresponsive.
The phone was insured, but I wanted to backup photos from the device before sending it off for repair/replacement.
HOW I FIXED IT.
Please note, you need at least some part of the screen to be working, specifically, some part of the screen where the pattern lock is.
You only need two pieces of software. The Android SDK and the Nexus 4 Toolkit http://forum.xda-developers.com/showthread.php?t=1995688
If you are running 4.2.2 you will need to update the toolkit. I also had the standard issues of installing the USB drivers for the N4. You need to get to a point where is shows up as an ADB device in Windows Device Manager.
As I didn't have USB debuggin enabled I couldn't connect tothe phone via ADB, but if you put it into recovery mode you can use Fastboot. Hold down the power key to turn the device off and turn it on while holding down Vol Down to load up recovery mode.
If you then start the N4 Toolkit, you should see the device listed as a fast boot device.
From within the toolkit unlock your bootloader.
Flash a temporary bootlader, (option 10) as the touchscreeen was broken it has to be CWM.
Once in CWM you can start to use ADB. Open up a DOS command prompt in Windows, go to your SDK/platform tools folder/ to access ADB.exe and you can use the pull command to copy folders to your PC. At this point, instead you can use applications like ADBexplorer or DroidExplorer to do the same thing through a nicer GUI.
If you'd like to still be able to use your phone, although without the touchscreen, you can load an unstable image to get into android and then use ADB to start changing system settings.
Firstly, before exiting CWM, clear the cache. Without doing this the phone jsut hung on the Nexus symbol while loading the image.
in the toolkit go to root/unroot options and select load unstable image(option 4 and then 6). This will fire you up into Android and it should be set up as you left it.
I wanted to enable bluetooth so to use a keyboard (I didn't have a mouse but this is a better option) from the DOS window type the following command
am start -a android.bluetooth.adapter.action.REQUEST_ENABLE
You should eventually get a pop-up on your screen saying that a request has been made to enable bluetooth. Hopefully your screen is working enough to select enable.
Then I use the workaround to disable the sceenlock, found here -> (http://www.addictivetips.com/androi...e-pattern-unlock-on-android-via-adb-commands/) I found method 2 worked for me. I imagine this will be stopped in a future update.
Method 1
adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name='lock_pattern_autolock';
update system set value=0 where name='lockscreen.lockedoutpermanently';
.quit
Method 2
adb shell rm /data/system/gesture.key
If either of these methods are successful you will be able to unlock the phone with an pattern, hence why you need to be able to touch some part of it.
From then, my bluetooth keyboard was already mated to my phone to I was able the navigate the menus to turn on USB Debugging, turn-off the screen lock and a few other bits and pieces I needed to do.
I then restarted (I was still working within the unstable image) and on reboot, all my changes had al been applied. No screen lock, bluetooth enabled and USB Debugging enabled.
Hopefully this will be of help to those in a similar position. Thanks has to go to the toolkit though which provides all the necessary access to carry this out.
I should probably add, you can use the toolkit to relock the bootlader if you're concerned about that and if you can't click the screen to enable bluetooth or mate a keyboard or mouse, once you have USB Debugging enabled you can use software like Screencast to control you phone's screen from a PC.
So typically, just as I fill my claim to repair my nexus my wife drops her, smashing the screen even more than I did so she has absolutely no use of her screen. I went through the process again and though I'd post it in a more simple fashion.
1. Reset Nexus into recovery mode (power & volume down)
2. Connect to PC via USB. Install the USB driver from the SDK so that it appears as an ADB device
3. Fire up the updated toolkit. You should see the nexus as a fast boot device
4. Unlock bootloader
5. Using option 10 on the toolkit load up CWM on the phone. This gives you ADB access so can you pull files off the device via ADB although I could access the SD card through programs like Droid explorer.
6. If you want to carry on further and get into Android properly, you'll need to wipe the cache from within CWM
7. Reboot and hold down the volume key to get back into recovery
8. In the toolkit select root options (option 4) and load temporary image (6) If it hangs on the google or nexus logo you've not wiped the cache.
9. With this second phone I couldn't access it through droid explorer as it was popping up as an MTP device but I could pull the files via command prompt or through the toolkit
10. If you have any use of the touchscreen at all you can run the following command which will then mean that any touch will unlock the device
adb shell rm /data/system/gesture.key11. You can activate bluetooth via adb if you have a mouse or keyboard available but you will need to be able to press okay on the screen
12. Any changes you make in the unstable android image such as lockscreen, bluetooth, enabling debugging, etc will remain in place when you restart the device.
13. You can relock the bootloader if you wish via the toolkit. You just need to be in recovery mode first.
Hope this simplifies the process
Does unlocking bootloader via toolkit not wipe everything? How are you unlocking bootloader and still able to pull data off?
EDIT: it appears fastboot oem unlock on the Nexus 4 *does not* wipe data!
Carpetboy said:
So typically, just as I fill my claim to repair my nexus my wife drops her, smashing the screen even more than I did so she has absolutely no use of her screen. I went through the process again and though I'd post it in a more simple fashion.
1. Reset Nexus into recovery mode (power & volume down)
2. Connect to PC via USB. Install the USB driver from the SDK so that it appears as an ADB device
3. Fire up the updated toolkit. You should see the nexus as a fast boot device
4. Unlock bootloader
5. Using option 10 on the toolkit load up CWM on the phone. This gives you ADB access so can you pull files off the device via ADB although I could access the SD card through programs like Droid explorer.
6. If you want to carry on further and get into Android properly, you'll need to wipe the cache from within CWM
7. Reboot and hold down the volume key to get back into recovery
8. In the toolkit select root options (option 4) and load temporary image (6) If it hangs on the google or nexus logo you've not wiped the cache.
9. With this second phone I couldn't access it through droid explorer as it was popping up as an MTP device but I could pull the files via command prompt or through the toolkit
10. If you have any use of the touchscreen at all you can run the following command which will then mean that any touch will unlock the device
adb shell rm /data/system/gesture.key11. You can activate bluetooth via adb if you have a mouse or keyboard available but you will need to be able to press okay on the screen
12. Any changes you make in the unstable android image such as lockscreen, bluetooth, enabling debugging, etc will remain in place when you restart the device.
13. You can relock the bootloader if you wish via the toolkit. You just need to be in recovery mode first.
Hope this simplifies the process
Click to expand...
Click to collapse
Please HELP, i can get to step 5...but then, when I try to use ADB via cmd (ie. adb shell), it says "error: device offline". what can it be? I don't know if this is a driver related issue (i've tried the toolkit drivers and the SDK drivers)...i'm desperated, I can't access the phone!!
Thanks in advance
not working for me
i'm in same boat with cracked screen. i can get CWM installed but i cant enabled usb debugging without touching the screen so i cant get adb working. how did you turn on usb debugging without the screen
Thanks for the guide.
Im curious on why youd want to boot an unstable(temporary) image after pulling the files using ADB in CWM recovery. Why not just wipe cache and reboot normally into Android ?
usb debugging without screen?
compsmart said:
i'm in same boat with cracked screen. i can get CWM installed but i cant enabled usb debugging without touching the screen so i cant get adb working. how did you turn on usb debugging without the screen
Click to expand...
Click to collapse
Can someone please walk me through how to do this? My screen is completely broken, but I can still turn on/off, I have reason to believe debugging is off because when I connect the phone (a Samsung galaxy sII skyrocket) to my Toshiba laptop via a micro USB, it makes a sound to signal that it's connected. Drives E and F then open up (but are empty) and then disappear. I have no idea what's going on but I absolutely cannot lose all of the data on this phone. Pictures and videos from my old blackberry Torch are on here too, making up about 4 years of my daughter's life that I would lose if I cannot retrieve. Also, I am not super -tech savvy, so if someone could help me I would be forever grateful.
Please!!
:crying:
almost the same issue
I have an Asus memo pad 10 (smart) some of the core apps have been corrupted, (keyboard, UI, launcher etc all the essential stuff) I've been trying to reinstall my UI and launcher from my computer when i found out that USB debugging was disabled. the tablet is basically unusable, i have no way of enabling from the tablet itself. is there a piece of script or something i could run from my PC to enable it?
any help would be greatly appreciated :crying:
bob mc bob said:
I have an Asus memo pad 10 (smart) some of the core apps have been corrupted, (keyboard, UI, launcher etc all the essential stuff) I've been trying to reinstall my UI and launcher from my computer when i found out that USB debugging was disabled. the tablet is basically unusable, i have no way of enabling from the tablet itself. is there a piece of script or something i could run from my PC to enable it?
any help would be greatly appreciated :crying:
Click to expand...
Click to collapse
My screen became unresponsive a while back. I ended up getting and OTG cable and plugging in a mouse. This allowed me to do everything as if the touchscreen was working. There's also an app called MyMobiler that let me plug in my device over USB and control my screen from my PC. Those two helped me enable USB Debugging, flash a custom ROM, root the phone, backup everything I needed, then restore the phone to stock. I hope this helps.
*Sorry for bumping such an old post*
Thanks for the really useful guide!
Could you or someone just confirm to me that unlocking the bootloader does not factory reset? The reason I'm doing this process is to access my personal data so it's important that I can keep it all.
I ask because at the unlock bootloader stage it implicitly warns me that there'll be a factory reset.
Thanks again!
HikerMan said:
*Sorry for bumping such an old post*
Thanks for the really useful guide!
Could you or someone just confirm to me that unlocking the bootloader does not factory reset? The reason I'm doing this process is to access my personal data so it's important that I can keep it all.
I ask because at the unlock bootloader stage it implicitly warns me that there'll be a factory reset.
Thanks again!
Click to expand...
Click to collapse
Unlocking to bootloader will wipe your device
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Unlocking to bootloader will wipe your device
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
In that case, I am confused as to how OP managed to unlock his bootloader. He actually states that the purpose of this was to retrieve data, like me.
Also, in a previous comment in this thread by jw95275, they claim that "it appears fastboot oem unlock on the Nexus 4 *does not* wipe data".
I am concerned about the conflicting answers so far, so will hold off for an explanation before I do anything. Thanks for the response!
HikerMan said:
In that case, I am confused as to how OP managed to unlock his bootloader. He actually states that the purpose of this was to retrieve data, like me.
Also, in a previous comment in this thread by jw95275, they claim that "it appears fastboot oem unlock on the Nexus 4 *does not* wipe data".
I am concerned about the conflicting answers so far, so will hold off for an explanation before I do anything. Thanks for the response!
Click to expand...
Click to collapse
You should just be able to "fastboot boot recovery.img" and boot CWM and then use ADB. W/O unlocking the BL
npjohnson said:
You should just be able to "fastboot boot recovery.img" and boot CWM and then use ADB. W/O unlocking the BL
Click to expand...
Click to collapse
This did not work for me. I have a Nexus 4 with a broken digitizer, locked bootloader, and usb debugging disabled. I need to grab some data off.
I've tried `fastboot flash recovery {{recovery .img}}` and `fastboot boot {{recovery .img}}` without unlocking the bootloader first, and via both methods, I get back "FAILED (remote: not supported in locked device)"
So I'm not sure how people are able to get into custom recovery without first unlocking BL/losing all their data. Can someone explain?
jinglejuice said:
This did not work for me. I have a Nexus 4 with a broken digitizer, locked bootloader, and usb debugging disabled. I need to grab some data off.
I've tried `fastboot flash recovery {{recovery .img}}` and `fastboot boot {{recovery .img}}` without unlocking the bootloader first, and via both methods, I get back "FAILED (remote: not supported in locked device)"
So I'm not sure how people are able to get into custom recovery without first unlocking BL/losing all their data. Can someone explain?
Click to expand...
Click to collapse
On some (few) Motorola devices (not nexus 4), you can fastboot boot without unlocking the BL.
Hey guys,
So I recently bought a nexus 7 32gb (first generation) and used it for about 30 minutes, then I applied what I presume was a faulty update and it has soft bricked my tablet.
Heres the scenerio,
-I cannot get my nexus 7 into usb debugging mode because it wont boot up into the actual interface and such
-Everytime I try to install the ADB drivers, the system installs it as "google nexus 7 bootloader interface"
-recovery mode will not load up, it ends up at the google screen with a text on the topright saying "booting failed"
-I'm pretty sure my bootloader is locked which could be another reason why I cant do any of the methods involving cmd, nrt, or that manual android sdk toolkit thing.
As far as I know right now (which is barely anything since I'm new to using this tablet), I can't do anything because I cannot get into usb debugging, nor can I get the tablet to read as the ADB interface / pass the full driver test in NRT.
Hopefully someone can help (Very descriptively please!) , thanks!
Sidenotes : my boot loader menus states the following...
FASTBOOT MODE
Product Name - Grouper
Variant - Grouper
HW version - ER3
Bootloader Version - 4.23
Baseband Version - N/A
Serial Number - idk if I should actually post this but im going to assume it's irrelevant for this subject
Signing - not defined yet
Lock state - Locked
Also, It was fresh out of the box, I think the tablet was updated to 4.1
bump...
anyone?!??!?!
I'm having a problem that is a little similar to yours. I have a nexus 7 2013 wifi. It won't boot up all the way it gets stuck on the X screen. Bootloader is locked and usb debugging is off. I've been trying to figure out if I can do a pull or backup over the adb sideloader.
Does your nexus have that capability?
I did come across a method that would unlock the bootloader. You need to install a nexus 7 toolkit.
I don't know if that will help you but let me dig up the link to the instructions.
If you would take the time to actually read the guides around here you would know that USB debugging is not a requirement in fast boot or recovery mode. USB debugging only applies to a booted os. Why don't you follow the guides and manually install your drivers? Use fast boot commands to flash a stock image. This isn't difficult to do. Stop messing with toolkits and learn something. You're here on XDA, utilize the resources we have.
happyfuntimes7 said:
Hey guys,
So I recently bought a nexus 7 32gb (first generation) and used it for about 30 minutes, then I applied what I presume was a faulty update and it has soft bricked my tablet.
Heres the scenerio,
-I cannot get my nexus 7 into usb debugging mode because it wont boot up into the actual interface and such
-Everytime I try to install the ADB drivers, the system installs it as "google nexus 7 bootloader interface"
-recovery mode will not load up, it ends up at the google screen with a text on the topright saying "booting failed"
-I'm pretty sure my bootloader is locked which could be another reason why I cant do any of the methods involving cmd, nrt, or that manual android sdk toolkit thing.
As far as I know right now (which is barely anything since I'm new to using this tablet), I can't do anything because I cannot get into usb debugging, nor can I get the tablet to read as the ADB interface / pass the full driver test in NRT.
Hopefully someone can help (Very descriptively please!) , thanks!
Sidenotes : my boot loader menus states the following...
FASTBOOT MODE
Product Name - Grouper
Variant - Grouper
HW version - ER3
Bootloader Version - 4.23
Baseband Version - N/A
Serial Number - idk if I should actually post this but im going to assume it's irrelevant for this subject
Signing - not defined yet
Lock state - Locked
Also, It was fresh out of the box, I think the tablet was updated to 4.1
Click to expand...
Click to collapse
Use Nexus root toolkit and folow Full driver instalation guide for correct driver instalation
After this use Flash stock to repair, then you can continue to unlock/root or anithing else.
Hello this is my first post. I have searched the threads and internet for answers but I have not been able to find a solution.
I have been customizing my phones since the days of baked black bean on my galaxy S1, but I am no expert at this stuff. Until about a week ago, I was happily running RR on the OPO (great ROM) but it has gotten a bit slow so I figured it was time to get a OP5.
When I boot into fastboot, my device is recognized with the command fastboot devices. My phone showed the following:
fastboot mode
product_name - QC_Refernce_Phone
VARIANT - MSM UFS
BOOTLOADER VERSION -
BASEBAND VERSION -
SERIAL NUMBER - c7ccda2
SECURE BOOT - yes
DEVICE STATE - locked
When I ran fastboot oem unlock, CMD prompt shows FAILED, however, the option to unlock the bootloader shows up on the OP5. I go through the process and wipe data. My phone now shows that it is unlocked, and I go into developer options to get advanced reboot/USB debugging/verify OEM unlock is still enabled. When I go back to fastboot, I am unable to flash TWRP. I have now seen a number of errors, usually:
FAILED (remote: Requested download size is more than max allowed) or target did not report max download size, or command write failed (no error). I have tried installing 4 different versions of ADB/fastboot from different sources, and I have tried TWRP cheeseburger 46, 58, and 62. I have also tried two different USB ports and 4 different USB drivers.
Does anyone know what could cause these issues or how to get TWRP installed? Any help would be much appreciated. I really want to get rooted and get substratum running.
hmm
did you type fastboot devices to check that u got connection ? do you have another pc to try ? another usb port
edit: also try disable developer option and aplly it again with oem unlock tapp
EDIT2: if you cant still get it work you can try
Advanced settings -> Backup & reset -> Reset all settings and after that unlock bootloader
I was able to solve this by using a friend's laptop and installing the drivers and abd. Worked like a charm and I was able to flash magisk for root.
For anyone else having this issue, try another pc if you can. I'm guessing this was either an issue with adb on my machine or a problem with the device drivers.
bro do u find solutions for this
I found an actual fix for this problem. Basically I had to download Large Address Allocation Tool (LAA) which you can find online. I would link to it but I do not have the website handy.
I found this solution after soft bricking my phone by installing Oreo (I don't suggest using VPN to pretend you are in Canada. Just run the beta or wait for the US release).
Essentially, you just need to run this tool on your adb.exe. From what I understand, the issue is just that adb is not using enough RAM. I think you'll need to be running Windows 7 64bit with at least 4GB RAM. I hope this info can help someone else!
jsnell said:
I was able to solve this by using a friend's laptop and installing the drivers and abd. Worked like a charm and I was able to flash magisk for root.
For anyone else having this issue, try another pc if you can. I'm guessing this was either an issue with adb on my machine or a problem with the device drivers.
Click to expand...
Click to collapse
Ever since i ditched windows and went with ubuntu i have not had one single driver issue, not one single hiccup on anything. It's been two months.. I'm never going back. lol. Every time I use adb and or fastboot it always works.