Database Users

Go back to stock firmware, how?

Hi, i've flash the omni rom, If I want to go back to the original firmware what should i do?

Download stock ROM of your phone and flash it with flashing tool
Like if you has SPD CPU then use spdupgrade tool or for Mtk use spflash tool
Load your firmware to tool and flash it
#Happyflashing[emoji4] [emoji4] [emoji4] [emoji4]

Hrishabh Sharma said:
Download stock ROM of your phone and flash it with flashing tool
Like if you has SPD CPU then use spdupgrade tool or for Mtk use spflash tool
Load your firmware to tool and flash it
#Happyflashing[emoji4] [emoji4] [emoji4] [emoji4]
Click to expand...
Click to collapse
What!? That is not even possible for this device. SPFlash is just for MTK as far as I know. Just download any update.zip that you want and flash it in TWRP(after factory reset wipe, of course)
But I have to assure you that TWRP will be overwritten with original recovery, so you'll need to install TWRP again if you want to flash another rom.

Thanks, there is a guide? Because i found another way using the cmd and flashing one thing at a time: recovery, system, cust..

XTutorials said:
What!? That is not even possible for this device. SPFlash is just for MTK as far as I know. Just download any update.zip that you want and flash it in TWRP(after factory reset wipe, of course)
But I have to assure you that TWRP will be overwritten with original recovery, so you'll need to install TWRP again if you want to flash another rom.
Click to expand...
Click to collapse
Okok, but the firmware that i have download have in the dload folder "update.APP". How can i flash throught twrp?

bomber56 said:
Okok, but the firmware that i have download have in the dload folder "update.APP". How can i flash throught twrp?
Click to expand...
Click to collapse
Download a "FULL" update on Huawei update site, and do not unzip it, just copy where you want, boot into TWRP, make a factory reset-wipe and flash it.
Do not UNZIP it!

Flashing th .zip in TWRP works fine (don't worry about the error it will throw) but please take a factory reset before.

XTutorials said:
What!? That is not even possible for this device. SPFlash is just for MTK as far as I know. Just download any update.zip that you want and flash it in TWRP(after factory reset wipe, of course)
But I have to assure you that TWRP will be overwritten with original recovery, so you'll need to install TWRP again if you want to flash another rom.
Click to expand...
Click to collapse
Bro
Sorry for mistake I not know spec of your phone that's why I written
Upgradetool for SPD
Sp flash tool for mtk ???

back to stock and relocking bootloader

Hello, i have to sell my A1 and I want back to stock and relock bootloader. I've got twrp recovery and magisk installed. How can I do that?

simply use mi fash tool

Mi Flash Tool and install official firmware (9.6.8.0)

I'm on Ubuntu. Is there any equivalent of MiFlashTool for Linux?

ttrublu said:
I'm on Ubuntu. Is there any equivalent of MiFlashTool for Linux?
Click to expand...
Click to collapse
Use the .sh script in ROM folder

Plz ,I need ur help..and it's urgent..

I have installed lineageos microg on my xiaomi a1.I don't have any twrp or any other recovery installed.. So I am thinking about going back to my stock ROM..So anyone can tell me how can I go back to stock android with details...
#TIA

You need PC
1.Install mi flash tools
2.Download Stock Rom Zip file
3.Take into fastboot mode
4.Connect with your pc
5.Now flash the Stock Rom Zip file with Mi Flash Tools

jubayertonu said:
You need PC
1.Install mi flash tools
2.Download Stock Rom Zip file
3.Take into fastboot mode
4.Connect with your pc
5.Now flash the Stock Rom Zip file with Mi Flash Tools
Click to expand...
Click to collapse
thats all?
thanks for ur reply..

Jhriyaz1 said:
thats all?
thanks for ur reply..
Click to expand...
Click to collapse
It is simple if youre going from custom ROM to stock ROM. Just download stock ROM and flash it via MiFlash when your device is in fastboot mode. After flashing it your device may be locked.

TrueMS said:
It is simple if youre going from custom ROM to stock ROM. Just download stock ROM and flash it via MiFlash when your device is in fastboot mode. After flashing it your device may be locked.
Click to expand...
Click to collapse
Tnx a lot guys..

Be sure to disable any kind of lockscreen password before flashing anything

Unbrick mi 9T

Hi anyone can help me ? , i brick my mi 9t , i can still access TWRP Recovery but how can i flash new rom using TWRP ?

Connect to computer or use an usb otg and flash a Recovery ROM.

Hi,
with Mi Tool V2. Download tool, phone in the fastboot mode, then Mi Tool V2 detects the phone and offers you the right Rome for flashing. Then follow the instructions in the tool
by chris

Schnedi said:
Connect to computer or use an usb otg and flash a Recovery ROM.
Click to expand...
Click to collapse
Hey Schnedi
Do you mean stock rom that can be installed through twrp recovery? Where can I download a "Recovery" rom?
I was trying to update MIUI version and something went wrong and when I restored my backup I can boot into MIUIU but everything isnt working (camera, wifi, calling,sensors etc)
thanks in advance

Aserar said:
Hey Schnedi
Do you mean stock rom that can be installed through twrp recovery? Where can I download a "Recovery" rom?
I was trying to update MIUI version and something went wrong and when I restored my backup I can boot into MIUIU but everything isnt working (camera, wifi, calling,sensors etc)
thanks in advance
Click to expand...
Click to collapse
Yes, usually, Xiaomi releases Fastboot Rom, Recovery Rom and OTA update.
Here you can find them: https://mifirm.net/model/davinci.ttt (the ones called "zip firmware").

Schnedi said:
Yes, usually, Xiaomi releases Fastboot Rom, Recovery Rom and OTA update.
Here you can find them: https://mifirm.net/model/davinci.ttt (the ones called "zip firmware").
Click to expand...
Click to collapse
Thank you my friend youre a life saver. Flashed the rom and my phone is back. It's the same rom I had and tried to flash before but through a different (wrong) method. I was afraid to flash it after reading someone saying they bricked their phone flashing it

Phone is dead after try of root and flash partition

I was rooting my phone, it was stuck on fastboot mode so I flashed the parition now .. screen goes black.. but I can hear sounds of starting phone and booting up. Can anyone help me. How to flash stock room and make my phone working again?

RakeshRaja said:
I was rooting my phone, it was stuck on fastboot mode so I flashed the parition now .. screen goes black.. but I can hear sounds of starting phone and booting up. Can anyone help me. How to flash stock room and make my phone working again?
Click to expand...
Click to collapse
Can it go to fastboot again?
Sent from my ZenFone Max Pro M1 using Tapatalk

RedGreenBlue123 said:
Can it go to fastboot again?
Sent from my ZenFone Max Pro M1 using Tapatalk
Click to expand...
Click to collapse
yes but I am not able to see the screen.. so if you can give me just direct commands i can try to execute them.

RakeshRaja said:
yes but I am not able to see the screen.. so if you can give me just direct commands i can try to execute them.
Click to expand...
Click to collapse
1. Try turn on the phone and wait 1 minute
2. Download AFT ROM from the link below
3. Extract downloaded zip and run Flashall_AFT.bat
4. Wait until it done, it will lock bootloader, install stock, and automatically reboot the phone after complete. See the CMD screen during flash to make sure it flash everything successfully. If it said wait for device or boot protected, you are out of luck.
Try this method if you see your phone as QCOM...9008: https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868
AFT: https://cloud.mail.ru/public/iNoC/4VQB1h4sE
Sent from my ZenFone Max Pro M1 using Tapatalk

RedGreenBlue123 said:
1. Try turn on the phone and wait 1 minute
2. Download AFT ROM from the link below
3. Extract downloaded zip and run Flashall_AFT.bat
4. Wait until it done, it will lock bootloader, install stock, and automatically reboot the phone after complete. See the CMD screen during flash to make sure it flash everything successfully. If it said wait for device or boot protected, you are out of luck.
Try this method if you see your phone as QCOM...9008: https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868
AFT: https://cloud.mail.ru/public/iNoC/4VQB1h4sE
Sent from my ZenFone Max Pro M1 using Tapatalk
Click to expand...
Click to collapse
Thats what cause this problem. I was stuck earlier at fastboot mode while doing root and then i found a youtube video explaining how to use this AFT and flash all bat file. Right after I did. phone restarted and no more screen display.
any idea?

Nope, try this first if you see your device as Qualcomm...9008: https://forum.xda-developers.com/as...brick-unbrick-hardbricked-max-pro-m1-t3829754
After that, flash the AFT ROM to get latest Oero 340 for daily use order than that old 215 build.
Sent from my ZenFone Max Pro M1 using Tapatalk
---------- Post added at 21:30 ---------- Previous post was at 21:25 ----------
RakeshRaja said:
Thats what cause this problem. I was stuck earlier at fastboot mode while doing root and then i found a youtube video explaining how to use this AFT and flash all bat file. Right after I did. phone restarted and no more screen display.
any idea?
Click to expand...
Click to collapse
I think you downloaded AFT ROM from other phone. Now, try QFIL method.
Sent from my ZenFone Max Pro M1 using Tapatalk

RedGreenBlue123 said:
Nope, try this first if you see your device as Qualcomm...9008: https://forum.xda-developers.com/as...brick-unbrick-hardbricked-max-pro-m1-t3829754
After that, flash the AFT ROM to get latest Oero 340 for daily use order than that old 215 build.
Sent from my ZenFone Max Pro M1 using Tapatalk
---------- Post added at 21:30 ---------- Previous post was at 21:25 ----------
I think you downloaded AFT ROM from other phone. Now, try QFIL method.
Sent from my ZenFone Max Pro M1 using Tapatalk
Click to expand...
Click to collapse
Not sure if its working. I did steps but no qualcomm device detected.. also no port is showing up on the software too.

RedGreenBlue123 said:
1. Try turn on the phone and wait 1 minute
2. Download AFT ROM from the link below
3. Extract downloaded zip and run Flashall_AFT.bat
4. Wait until it done, it will lock bootloader, install stock, and automatically reboot the phone after complete. See the CMD screen during flash to make sure it flash everything successfully. If it said wait for device or boot protected, you are out of luck.
Try this method if you see your phone as QCOM...9008: https://forum.xda-developers.com/android/development/guide-fixing-hard-bricks-t3403868
AFT: https://cloud.mail.ru/public/iNoC/4VQB1h4sE
Sent from my ZenFone Max Pro M1 using Tapatalk
Click to expand...
Click to collapse
Can you give me AFT file again that .ru link is not working for me.

RakeshRaja said:
Can you give me AFT file again that .ru link is not working for me.
Click to expand...
Click to collapse
I think it will no longer work because it uses Fastboot. Try my new 9008 link.
Sent from my ZenFone Max Pro M1 using Tapatalk

RedGreenBlue123 said:
I think it will no longer work because it uses Fastboot. Try my new 9008 link.
Sent from my ZenFone Max Pro M1 using Tapatalk
Click to expand...
Click to collapse
It not working. Port it not showing up in the software. I am able to use fastboot mode. Problem is "screen not working/display not working" Phone works. I can receive call too but screen is not working.

RakeshRaja said:
It not working. Port it not showing up in the software. I am able to use fastboot mode. Problem is "screen not working/display not working" Phone works. I can receive call too but screen is not working.
Click to expand...
Click to collapse
Okay
https://androidfilehost.com/?fid=1395089523397947808
Sent from my ZenFone Max Pro M1 using Tapatalk

RedGreenBlue123 said:
Okay
https://androidfilehost.com/?fid=1395089523397947808
Sent from my ZenFone Max Pro M1 using Tapatalk
Click to expand...
Click to collapse
Bro you saved my day.. damn it worked.. Please be kind and tell me the working rooting method please. I cant flash TWRP.. default recovery metho always showing up.

RakeshRaja said:
Bro you saved my day.. damn it worked.. Please be kind and tell me the working rooting method please. I cant flash TWRP.. default recovery metho always showing up.
Click to expand...
Click to collapse
Thank u
Stock ROM always override stock recovery every boot. Go to TWRP right after flash or flash a custom rom, then TWRP.
Which ROM are you using? Magisk will work will almost all Nougat, Oreo, Pie ROMs and Magisk 19.5+ for Android Q. If you don't like Magisk because too many features, install SuperSU.
https://download.chainfire.eu/1220/SuperSU/
Sent from my ZenFone Max Pro M1 using Tapatalk

I have stock ROM. I also like Magisk. Do you any working complete guide to root? Specially correct TWRP image?

The latest TWRP working for ZMP M1 was r47 release. Don't know if it's still applicable for the latest update. Try checking latest TWRP for lineage OS builds

RakeshRaja said:
I have stock ROM. I also like Magisk. Do you any working complete guide to root? Specially correct TWRP image?
Click to expand...
Click to collapse
Flash supersu zip or magisk zip using twrp. That's it.
You can any TWRP that it is 3.2.3+ to flash Pie and nonSAR roms. Decrypt? You must use a recovery that match your rom's security patch.
TWRP for Pie: (Working O and Q but not able to decrypt due to Pie's security patch included)
June --> August: https://drive.google.com/folderview?id=1Oah0Y1Fp6DLLGF6FtdBlsjhis6m-jTMg
September --> Jan 2020:
https://androidfilehost.com/?w=files&flid=299672
Remember those TWRPs is not my work, it is by Alex Yustasov (alex9yust) for June --> Aug and Cecell3000 for Sep --> Jan 2020.
Sent from my ZenFone Max Pro M1 using Tapatalk