I have installed lineageos microg on my xiaomi a1.I don't have any twrp or any other recovery installed.. So I am thinking about going back to my stock ROM..So anyone can tell me how can I go back to stock android with details...
#TIA
You need PC
1.Install mi flash tools
2.Download Stock Rom Zip file
3.Take into fastboot mode
4.Connect with your pc
5.Now flash the Stock Rom Zip file with Mi Flash Tools
jubayertonu said:
You need PC
1.Install mi flash tools
2.Download Stock Rom Zip file
3.Take into fastboot mode
4.Connect with your pc
5.Now flash the Stock Rom Zip file with Mi Flash Tools
Click to expand...
Click to collapse
thats all?
thanks for ur reply..
Jhriyaz1 said:
thats all?
thanks for ur reply..
Click to expand...
Click to collapse
It is simple if youre going from custom ROM to stock ROM. Just download stock ROM and flash it via MiFlash when your device is in fastboot mode. After flashing it your device may be locked.
TrueMS said:
It is simple if youre going from custom ROM to stock ROM. Just download stock ROM and flash it via MiFlash when your device is in fastboot mode. After flashing it your device may be locked.
Click to expand...
Click to collapse
Tnx a lot guys..
Be sure to disable any kind of lockscreen password before flashing anything
Related
hi everyone...
IN ROUTINE FLASHING PROCESSES WE USE CUSTOM RECOVERIES......
BUT SOMETIMES FOR OFFICIAL UPDATES WE NEED STOCK RECOVERY....
SO HERE IT IS.......
EXTRACTED FROM OFFICIAL XT 1022 4.4.4 FIRMWARE......
BUT IT SHOULD WORK ON OTHERS TOO.....
If you have rooted your device once....
Only full unroot from SuperSU and flashing this recovery will not work....
YOU HAVE TO FLASH FULL FIRMWARE....
OTHERWISE OTA UPDATE WILL FAIL....(because after rooting our build.prop gets little edited....which will cause problems)
INSTALLATION INSTRUCTIONS....
1. DOWNLOAD "RECOVERY.ZIP".
2. U MUST HAVE mfastboot/fastboot AND adb tools EXTRACTED IN A FOLDER ON YOUR PC.
3. EXTRACT RECOVERY.ZIP IN THE SAME FOLDER.
4. PUT YOU PHONE IN BOOTLOADER MODE.
5. CONNECT IT TO PC AND OPEN THAT FOLDER.
6. OPEN CMD WINDOW HERE BY PRESSING SHIFT+RIGHT CLICK.
7. ENTER FOLLOWING COMMAND.
mfastboot flash recovery recovery.img
the command will result in okay...
u r done.....
THANK YOU...
dhruv7855 said:
hi everyone...
IN ROUTINE FLASHING PROCESSES WE USE CUSTOM RECOVERIES......
BUT SOMETIMES FOR OFFICIAL UPDATES WE NEED STOCK RECOVERY....
SO HERE IT IS.......
EXTRACTED FROM OFFICIAL XT 1022 4.4.4 FIRMWARE......
BUT IT SHOULD WORK ON OTHERS TOO.....
INSTALLATION INSTRUCTIONS....
1. DOWNLOAD "RECOVERY.ZIP".
2. U MUST HAVE mfastboot/fastboot AND adb tools EXTRACTED IN A FOLDER ON YOUR PC.
3. EXTRACT RECOVERY.ZIP IN THE SAME FOLDER.
4. PUT YOU PHONE IN BOOTLOADER MODE.
5. CONNECT IT TO PC AND OPEN THAT FOLDER.
6. OPEN CMD WINDOW HERE BY PRESSING SHIFT+RIGHT CLICK.
7. ENTER FOLLOWING COMMAND.
mfastboot flash recovery recovery.img
the command will result in okay...
u r done.....
THANK YOU...
Click to expand...
Click to collapse
curiosity, how you extract the recovery from original firmware?
I have used flashify to flash stock recovery before. It seemed to have worked. Its super easy as well and requires no computer. Try at your own risk.
Sent from my XT1023
alex_is_the_1 said:
I have used flashify to flash stock recovery before. It seemed to have worked. Its super easy as well and requires no computer. Try at your own risk.
Sent from my XT1023
Click to expand...
Click to collapse
I don't hunderstand, flashify require root, to root we need to unlock bootloader and apply twrp or cwm recoveryand after supersu, how flashify get stock recovery after this mods?
noRetail said:
I don't hunderstand, flashify require root, to root we need to unlock bootloader and apply twrp or cwm recoveryand after supersu, how flashify get stock recovery after this mods?
Click to expand...
Click to collapse
If you need your stock recovery your already rooted and have a custom recovery in place. So therefore your device has an unlocked boot loader. Flashify can flash recovery IMG without even powering into recovery.
Sent from my XT1023
alex_is_the_1 said:
If you need your stock recovery your already rooted and have a custom recovery in place. So therefore your device has an unlocked boot loader. Flashify can flash recovery IMG without even powering into recovery.
Sent from my XT1023
Click to expand...
Click to collapse
OK, you know how i get stock recovery.img from my stock lollipop 5.0.2? My phone is Moto E XT1021.
noRetail said:
OK, you know how i get stock recovery.img from my stock lollipop 5.0.2? My phone is Moto E XT1021.
Click to expand...
Click to collapse
I don't know for sure, but @lost101 can possibly help you with that. It will most likely require you to pull it using an adb command.
Sent from my XT1023
I have downloaded the firmware and simply by unzipping u will get stock recovery.img
noRetail said:
OK, you know how i get stock recovery.img from my stock lollipop 5.0.2? My phone is Moto E XT1021.
Click to expand...
Click to collapse
No you can not
Untill Motorola releases official firmware worldwide to download
I'm not talking about the ota
alex_is_the_1 said:
I don't know for sure, but @lost101 can possibly help you with that. It will most likely require you to pull it using an adb command.
Sent from my XT1023
Click to expand...
Click to collapse
+1 may be u can by pulling through adb
Not know how
dhruv7855 said:
+1 may be u can by pulling through adb
Not know how
Click to expand...
Click to collapse
Thank's men, but to pulling from adb need root access, waiting for community...
So for retrieving back to stock 4.4.4 ROM from cm11, I just have to do write that recovery command
pls help
neo_da_leo said:
So for retrieving back to stock 4.4.4 ROM from cm11, I just have to do write that recovery command
pls help
Click to expand...
Click to collapse
No no
If you have rooted your device once.....you have to flash full stock rom.....
Only full unroot from SuperSU and flashing recovery won't work..
Edited OP...
Sent from my Moto G using XDA Free mobile app
dhruv7855 said:
No no
If you have rooted your device once.....you have to flash full stock rom.....
Only full unroot from SuperSU and flashing recovery won't work..
Edited OP...
Sent from my Moto G using XDA Free mobile app
Click to expand...
Click to collapse
Thanks but I did that command now my recovery option is not working. It is showing android symbol with " ! " sign when recovery option is selected
how to get recovery option working
neo_da_leo said:
Thanks but I did that command now my recovery option is not working. It is showing android symbol with " ! " sign when recovery option is selected
how to get recovery option working
Click to expand...
Click to collapse
You are okay bro...
U just need to hold power button and press volome up once....(after that android logo appears)
Then stock recovery will pop...
That is the method to enter stock recovery...
Sent from my Moto G using XDA Free mobile app
Thanks bro @dhruv7855
for going back to stock ROM 4.4.4 from cm11 can I use my backup file that was taken before installing cm11 ?
neo_da_leo said:
Thanks bro @dhruv7855
for going back to stock ROM 4.4.4 from cm11 can I use my backup file that was taken before installing cm11 ?
Click to expand...
Click to collapse
But I think that backup would be containing custom recovery...
Sent from my Moto G using XDA Free mobile app
Getting problem in update...
Hii
i am unable to download anything.. can we get official updates for lollipop???
Can anyone upload soak test recovery?
boot.img
dhruv7855 said:
hi everyone...
IN ROUTINE FLASHING PROCESSES WE USE CUSTOM RECOVERIES......
BUT SOMETIMES FOR OFFICIAL UPDATES WE NEED STOCK RECOVERY....
SO HERE IT IS.......
EXTRACTED FROM OFFICIAL XT 1022 4.4.4 FIRMWARE......
BUT IT SHOULD WORK ON OTHERS TOO.....
If you have rooted your device once....
Only full unroot from SuperSU and flashing this recovery will not work....
YOU HAVE TO FLASH FULL FIRMWARE....
OTHERWISE OTA UPDATE WILL FAIL....(because after rooting our build.prop gets little edited....which will cause problems)
INSTALLATION INSTRUCTIONS....
1. DOWNLOAD "RECOVERY.ZIP".
2. U MUST HAVE mfastboot/fastboot AND adb tools EXTRACTED IN A FOLDER ON YOUR PC.
3. EXTRACT RECOVERY.ZIP IN THE SAME FOLDER.
4. PUT YOU PHONE IN BOOTLOADER MODE.
5. CONNECT IT TO PC AND OPEN THAT FOLDER.
6. OPEN CMD WINDOW HERE BY PRESSING SHIFT+RIGHT CLICK.
7. ENTER FOLLOWING COMMAND.
mfastboot flash recovery recovery.img
the command will result in okay...
u r done.....
THANK YOU...
Click to expand...
Click to collapse
Could you please help me with boot.img for same device, same 4.4.4 version. Thanks
Is there anyway I can lock the bootloader on my ZE520KL?
I would like to know it, too.
Android 7 cannot be installed with it unlocked, afaik.
anderbytes said:
I would like to know it, too.
Android 7 cannot be installed with it unlocked, afaik.
Click to expand...
Click to collapse
I have latest update android 7.0 with unlocked bootloader.
ekha24 said:
I have latest update android 7.0 with unlocked bootloader.
Click to expand...
Click to collapse
How did you do it??
I've bought my ZEN3 (520) and it had Android 6. I managed to root it, but I was forced to unlock bootloader to do it (don't remember if official or unofficial unlock).
Now I removed root, tried reinstalling stock boot partition, etc...etc... but nothing works! It always trips at the dm-verity check at boot time, and it says it will be shut down in 10 seconds, and it really shuts down! (
anderbytes said:
How did you do it??
I've bought my ZEN3 (520) and it had Android 6. I managed to root it, but I was forced to unlock bootloader to do it (don't remember if official or unofficial unlock).
Now I removed root, tried reinstalling stock boot partition, etc...etc... but nothing works! It always trips at the dm-verity check at boot time, and it says it will be shut down in 10 seconds, and it really shuts down! (
Click to expand...
Click to collapse
Why u tried to remove root? for installing nougat? If u want to update to nougat, u dont need remove root, just flash it.
Can you access recovery mode? If yes, just copy the rom on your sd card, before u flash the rom, u must flash boot.img inside rom.zip and stock recovery same as rom ver.
ekha24 said:
Why u tried to remove root? for installing nougat? If u want to update to nougat, u dont need remove root, just flash it.
Can you access recovery mode? If yes, just copy the rom on your sd card, before u flash the rom, u must flash boot.img inside rom.zip and stock recovery same as rom ver.
Click to expand...
Click to collapse
The problems are: I don't know what are the correct boot.img and recovery to flash.
Is there any detailed tutorial? With links to download or something?
How can I tell I'm flashing the correct files?
anderbytes said:
The problems are: I don't know what are the correct boot.img and recovery to flash.
Is there any detailed tutorial? With links to download or something?
How can I tell I'm flashing the correct files?
Click to expand...
Click to collapse
For boot.img and stock recovery : https://mega.nz/#F!ok0V0RIA!5WKtHe98opzjVI3NPbM7Ww
(ze520kl=z017d)
For stock firmware : https://www.asus.com/Phone/ZenFone-3-ZE520KL/HelpDesk_Download/
If u want flash the latest avaible stock firmware, u must extract firmware.zip u downloaded, and flash boot.img and recovery.img from it. If u cant find recovery.img inside it, just flash latest recovery.img avaible from mega (its for nougat too). Put firmware ur downloaded on sd card.
-reboot your phone to fastboot mode, connect your phone to pc and flash boot.img and recovery.img
-after that go to recovery>install update from sd card and choose the .zip
ekha24 said:
For boot.img and stock recovery : https://mega.nz/#F!ok0V0RIA!5WKtHe98opzjVI3NPbM7Ww
(ze520kl=z017d)
For stock firmware : https://www.asus.com/Phone/ZenFone-3-ZE520KL/HelpDesk_Download/
If u want flash the latest avaible stock firmware, u must extract firmware.zip u downloaded, and flash boot.img and recovery.img from it. If u cant find recovery.img inside it, just flash latest recovery.img avaible from mega (its for nougat too). Put firmware ur downloaded on sd card.
-reboot your phone to fastboot mode, connect your phone to pc and flash boot.img and recovery.img
-after that go to recovery>install update from sd card and choose the .zip
Click to expand...
Click to collapse
Thanks. I'll give it a try
Hi, i've flash the omni rom, If I want to go back to the original firmware what should i do?
Download stock ROM of your phone and flash it with flashing tool
Like if you has SPD CPU then use spdupgrade tool or for Mtk use spflash tool
Load your firmware to tool and flash it
#Happyflashing[emoji4] [emoji4] [emoji4] [emoji4]
Hrishabh Sharma said:
Download stock ROM of your phone and flash it with flashing tool
Like if you has SPD CPU then use spdupgrade tool or for Mtk use spflash tool
Load your firmware to tool and flash it
#Happyflashing[emoji4] [emoji4] [emoji4] [emoji4]
Click to expand...
Click to collapse
What!? That is not even possible for this device. SPFlash is just for MTK as far as I know. Just download any update.zip that you want and flash it in TWRP(after factory reset wipe, of course)
But I have to assure you that TWRP will be overwritten with original recovery, so you'll need to install TWRP again if you want to flash another rom.
Thanks, there is a guide? Because i found another way using the cmd and flashing one thing at a time: recovery, system, cust..
XTutorials said:
What!? That is not even possible for this device. SPFlash is just for MTK as far as I know. Just download any update.zip that you want and flash it in TWRP(after factory reset wipe, of course)
But I have to assure you that TWRP will be overwritten with original recovery, so you'll need to install TWRP again if you want to flash another rom.
Click to expand...
Click to collapse
Okok, but the firmware that i have download have in the dload folder "update.APP". How can i flash throught twrp?
bomber56 said:
Okok, but the firmware that i have download have in the dload folder "update.APP". How can i flash throught twrp?
Click to expand...
Click to collapse
Download a "FULL" update on Huawei update site, and do not unzip it, just copy where you want, boot into TWRP, make a factory reset-wipe and flash it.
Do not UNZIP it!
Flashing th .zip in TWRP works fine (don't worry about the error it will throw) but please take a factory reset before.
XTutorials said:
What!? That is not even possible for this device. SPFlash is just for MTK as far as I know. Just download any update.zip that you want and flash it in TWRP(after factory reset wipe, of course)
But I have to assure you that TWRP will be overwritten with original recovery, so you'll need to install TWRP again if you want to flash another rom.
Click to expand...
Click to collapse
Bro
Sorry for mistake I not know spec of your phone that's why I written
Upgradetool for SPD
Sp flash tool for mtk ???
For those who want the stock rom i will live a link to it and a guide how to install it.
It has the MAY update so those who are stuck at the februray update can fix it.
Note: This process will erase all your data, i recommend do a backup and the phone must be unlocked in order to flash the rom.
Link to Stock Rom here
Guide
After downloading the file go to the adb fastboot folder (that you probably already have) and extract the zip to it.
Put your original cable in a usb 2.0 port and connect to the phone and enter fastboot.
After that just click the flash_stock_pie_MI_A2.bat file and wait until it´s done. It will automatcally reboot
Have a good flashing
afonso14401 said:
For those who want the stock rom i will live a link to it and a guide how to install it.
It has the MAY update so those who are stuck at the februray update can fix it.
Note: This process will erase all your data, i recommend do a backup and the phone must be unlocked in order to flash the rom.
Link to Stock Rom here
Guide
After downloading the file go to the adb fastboot folder (that you probably already have) and extract the zip to it.
Put your original cable in a usb 2.0 port and connect to the phone and enter fastboot.
After that just click the flash_stock_pie_MI_A2.bat file and wait until it´s done. It will automatcally reboot
Have a good flashing
Click to expand...
Click to collapse
Thanks ?
Nuraiman95 said:
Thanks ?
Click to expand...
Click to collapse
You Welcome
Can I flash this if I´m on a custom ROM?
Hi anyone can help me ? , i brick my mi 9t , i can still access TWRP Recovery but how can i flash new rom using TWRP ?
Connect to computer or use an usb otg and flash a Recovery ROM.
Hi,
with Mi Tool V2. Download tool, phone in the fastboot mode, then Mi Tool V2 detects the phone and offers you the right Rome for flashing. Then follow the instructions in the tool
by chris
Schnedi said:
Connect to computer or use an usb otg and flash a Recovery ROM.
Click to expand...
Click to collapse
Hey Schnedi
Do you mean stock rom that can be installed through twrp recovery? Where can I download a "Recovery" rom?
I was trying to update MIUI version and something went wrong and when I restored my backup I can boot into MIUIU but everything isnt working (camera, wifi, calling,sensors etc)
thanks in advance
Aserar said:
Hey Schnedi
Do you mean stock rom that can be installed through twrp recovery? Where can I download a "Recovery" rom?
I was trying to update MIUI version and something went wrong and when I restored my backup I can boot into MIUIU but everything isnt working (camera, wifi, calling,sensors etc)
thanks in advance
Click to expand...
Click to collapse
Yes, usually, Xiaomi releases Fastboot Rom, Recovery Rom and OTA update.
Here you can find them: https://mifirm.net/model/davinci.ttt (the ones called "zip firmware").
Schnedi said:
Yes, usually, Xiaomi releases Fastboot Rom, Recovery Rom and OTA update.
Here you can find them: https://mifirm.net/model/davinci.ttt (the ones called "zip firmware").
Click to expand...
Click to collapse
Thank you my friend youre a life saver. Flashed the rom and my phone is back. It's the same rom I had and tried to flash before but through a different (wrong) method. I was afraid to flash it after reading someone saying they bricked their phone flashing it