Hello,
i installed the beta on my OXM device. but now i want to flash my device back to the official LUX version. i downloaded it from sammobile. i added it in odin but when having the phone in download mode odin says i'm connected but when i start the program it quickly stops without any changes.
nothing changes on the device or flashes it. can somenone help me?
Try another cable. Sometimes the cable is the culprit.
nielsvg said:
Hello,
i installed the beta on my OXM device. but now i want to flash my device back to the official LUX version. i downloaded it from sammobile. i added it in odin but when having the phone in download mode odin says i'm connected but when i start the program it quickly stops without any changes.
nothing changes on the device or flashes it. can somenone help me?
Click to expand...
Click to collapse
Make sure your not using a USB 3.0 port. It has to be USB 2.0 only. Odin has always been that way. You can always try Odin 3B patched. A new 3.13.3 version was just released.
Sent from my SM-G975U1 using XDA Labs
Related
Hi guys I have a problem with this note 3 The previous owner tried to flash a rom but it did not go well and the phone does not start anymore. Not even the word samsung appears and if I connect it to the charger will not turn on no lights. Connecting it to the pc you hear the classic sound of recognition but you can not find the driver. I can not even send him in recovery. Is there anything I could do? Thanks and sorry for my english
Flash it with latest stock firware for your model via odin......
Sent from komsa's Air
How do I flash the firmware if the PC did not detect my phone? Odin the same I do not detect
Search forums. I once did read something similar. You have to do something and charge with PC. Can't remember.
Unfortunately I can not find anything about it
I found only one post for the hard brik
Have you tried Volume down + Home + Power while your phone was plugged in and ODIN running to see if ODIN detects it?
U r trying on Mac computer?
Sent from my SM-N9005
PLMD said:
How do I flash the firmware if the PC did not detect my phone? Odin the same I do not detect
Click to expand...
Click to collapse
Resistor JIG 301 kOm whom to you will help to come into the Download mode. Then flash stock firmware for the same region (CSC-code).
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
When I connect it to Pc it keeps bootlooping and pc gives sound of connecting then disconnecting of hardware.
GorJessSpazzer said:
Just flash your firmware from Odin using a PC, I had a similar problem in my tablet, it didn't had download mode either and that worked, try it.
Click to expand...
Click to collapse
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
talvigi said:
How did you flash a firmware, when your tablet didn't have download mode? What ODIN version did you use? please tell us we need your experience.
Click to expand...
Click to collapse
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
GorJessSpazzer said:
Turn off your device, keep your finger in the button until the device is off or pull off the battery, connect it to the PC and flash your firmware through Odin, at that moment I used the 3.70 i think but you can use the latest version it's fine, that should install download mode and the whole firmware if that doesn't work I'm afraid I don't know how else I can help, that's what I did and it worked
Click to expand...
Click to collapse
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead bur or wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me food the step by step procedure it was just like this:
1. I started the Odin 3.07 and connected my device to see is it was detected or not, my surprise the Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down button pressed to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. From that moment I knew my device was not dead now so i had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Same problem, but apparently worst!
AwkWeirdo said:
Hello,
I was trying to flash Twrp recovery in my phone using flashify. It said flash successfully and i rebooted. It starting bootlooping. I manually tried by pressing Volume up + Home+Power keys it was still doing bootloop. I tried to goto download mode by pressing Volume Down+ Home+Power keys it still kept bootlooping even USB jig didn't work. I need your valued suggestion about what to do next.
Thanks in Advance.
I have Samsung Galaxy Grand Primr G530H
here is video link youtu.be/B_EtRTH93YE
Click to expand...
Click to collapse
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
GorJessSpazzer said:
I'm glad I helped you and thanks for your description, other people with the same problem can see it, my English its not good and I was afraid that I didn't help you correctly.
Click to expand...
Click to collapse
talvigi said:
You are right I did it the same way and it worked for me too. I actually was thinking the phone was quite dead but it wasn't, I just flashed the recovery firmware 4.4.4 Russian and if you ask me for the step by step procedure it was someting like this:
1. I started the Odin 3.07 and connected my device to see if it was detected or not, to my surprise, Odin catch it, and shown added and the port number was 18.
2. I just pulled out the USB cable from my laptop and loaded the BL file only to just flash the bootloader file and see what would happen, I was trying it bcz I was totally disappointed with the device i.e. Grand Prime 530H Duos. I also noticed that my device was not stable even with that black screen it used to restart after almost five minutes in that case. And I knew that in 5 minute I will just be able to flash BL file. The BL file was loaded on the Odin now and I inserted the USB cable again while keeping the vol down + home key pressed, to my laptop when the Odin again found and connected with my device, I didnot take any more time to flash BL file.
3. As soon as i had not flashed all the SW therefore, my device didn't boot properly, and I thought it didn't work but when my device was connected to the computer I just listened the startup tone of the Android 4.4.4. or the device. From that moment I knew my device was not dead now so i pullup the battery, put it again inside to check its status, did this almost thrice, but still the same black screen, yet i heard the startup sound everytime. Now as far as knew the phone is on but showing nothing, I had to select all four files from the recovery firmware of 4.4.4 and connect the device to odin even there was no sign of download mode, as soon i clicked the Start button i saw many things in the Odin bar which were good enough to see. after the firmware flashed the device got started.
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using Tapatalk
lucas13garcia said:
Hello guys! Could you please help me with the same issue? The difference is that Odin doesn't recognize when I plug in my phone! I don't know what else to do. It's a G530H.
Thank you very much!
Click to expand...
Click to collapse
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
talvigi said:
Is your USB cable original is it working on other devices? And are you using a USB 2.0 port, that is very much necessary, for Odin and some other hardware/software environment applications. And you also must have Samsung USB drivers installed in your PC, you can also try all this process on some other PCs
Sent from my SAMSUNG-SM-G920A using Tapatalk
Click to expand...
Click to collapse
Hello!
Yes, that USB works with other phones. And even not being the original one, it was working to transfer files before this issue...
It is a USB 2.0 port, and even when I go to "Device Manage" on Windows, it doesn't show any port with an unknown device or something like that...
Thanks!
I have an S7 edge running the latest BTU firmware DQG1.
I have tried to flash it via Odin to EVR which failed. The phone is stuck on an error has occurred while updating the device.
It is not detectable via Samsung Smart.
I have tried to reflash it with DQG1 and it starts and then half way through fails.
Have I killed it? Please help I've only had it a week.
Here is what you can do, if it fails, then yes you have bricked your device... If not, hurray!
1. Charge your phone to 80%
2. Put your phone in download mode.
3. Uninstall, redownload and reinstall the driver for your phone. You can use the device manager in Windows for this.
4. Get the stock firmware with BTU CSC which is the default.
5. Use a new USB cable to connect the phone to the PC, this will eliminate the error IF its cable related.
6. Flash the new software
7. Pray
8. If all goes well, you'll have a working phone....
I tried again last night with a different USB cable and the latest BTU and it is now back up and running.
Next question is how do I get it on EVR firmware ?
so about two weeks ago my phone failed in odin since then it doesnt get detected on the pc... i tried literally everything i used different pc's,different cables, reinstalled drivers everything and still not detected so what can i do i went to samsung here in egypt said he couldnt fix it because the device is not from egypt and they are not familiar with it *doesnt make sense tbh* so what can i do now? and is there anyway i can flash through sd card any ota update??
device : SM-g9750
Charge your phone for some time and see if it turns on and if it does go to download mode or emergency recovery screen is download mode too and try the following steps
1. While your phone is on the Emergency Recovery Screen or download mode, connect it to the computer.
2. Open Odin and load all the firmware files. Download the original firmware file
3. You will find that Odin has already detected your phone.
4. The options checked in Odin should be F.Reset.Time and Auto-Reboot.
5. After making all the preparations, click on the “Start” button in Odin.
6. Let the firmware flashing end. Once done, disconnect the phone and let it turn on. You will be out of the Emergency Recovery/Download mode Screen now.
IMP: Download the original firmware file for your phone
rubenswing said:
Charge your phone for some time and see if it turns on and if it does go to download mode or emergency recovery screen is download mode too and try the following steps
1. While your phone is on the Emergency Recovery Screen or download mode, connect it to the computer.
2. Open Odin and load all the firmware files. Download the original firmware file
3. You will find that Odin has already detected your phone.
4. The options checked in Odin should be F.Reset.Time and Auto-Reboot.
5. After making all the preparations, click on the “Start” button in Odin.
6. Let the firmware flashing end. Once done, disconnect the phone and let it turn on. You will be out of the Emergency Recovery/Download mode Screen now.
IMP: Download the original firmware file for your phone
Click to expand...
Click to collapse
ofcourse bro i did that im telling you it is not detected on the computer
Kriture said:
ofcourse bro i did that im telling you it is not detected on the computer
Click to expand...
Click to collapse
Which firmware did you attempt to flash? For your device only 3 firmwares will work, Hong Kong, China and Taiwan. It's not a Multi-CSC device so if you attempted flashing the Egypt firmware (Exynos) you could be SOL.
varcor said:
Which firmware did you attempt to flash? For your device only 3 firmwares will work, Hong Kong, China and Taiwan. It's not a Multi-CSC device so if you attempted flashing the Egypt firmware (Exynos) you could be SOL.
Click to expand...
Click to collapse
no i flashed the hong kong firmware
Kriture said:
no i flashed the hong kong firmware
Click to expand...
Click to collapse
I had a device - laptop connectivity issue on my SM-G9750. I tried updated drivers, different cables and adapters. Strangely enough it wasn't until I updated Windows 10 that the problem was solved. If you haven't done so you might give this a shot.
varcor said:
I had a device - laptop connectivity issue on my SM-G9750. I tried updated drivers, different cables and adapters. Strangely enough it wasn't until I updated Windows 10 that the problem was solved. If you haven't done so you might give this a shot.
Click to expand...
Click to collapse
This! + Unplug laptop & remove battery after update. Replace battery, plug in, go to Odin afterwards
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
SkopiX said:
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
Click to expand...
Click to collapse
Install all needed drivers, and dowload latest firmware here's link (you can try to flash universal snapdragon firmware):
Download Samsung Galaxy S7 SM-G930U USC USA (US Cellular) G930UUES8CRK1 firmware
Fast download latest Samsung Galaxy S7 firmware SM-G930U from USA (US Cellular) with G930UUES8CRK1 and Android version 8.0.0
www.sammobile.com
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
SkopiX said:
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
Click to expand...
Click to collapse
What is your Odin version???
Try this one:
Odin3 v3.12 (PrinceComsy).zip | Tool by psouza4 for Galaxy S7
PrinceComsy's Odin3 v3.12 hash skip version.
androidfilehost.com
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
SkopiX said:
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
Click to expand...
Click to collapse
If you press power more than 10 sec. and press vol- + home it drops you back to this mode???
yes, EVERY action ends on this screen if I hold power more than 1 sec +-, it just restarting and restarting...
Hey guys, just a fast info:
I bought this special cable from aliexpress
https://www.aliexpress.com/item/32966775653.html?spm=a2g0s.9042311.0.0.32dd4c4dxNJCmM
thanks to this I could boot into DL mode (which I couldnt before) and I flashed newest USA FW with odin
So now, its working!