Dear Friends, I have the Kingwear KW18 watch and due to an error in the phone book, I updated the firmware with the one that has the Kingwear page and now the screen appears to me as out of date, and some colored boxes at the bottom. The clock works halfway, but it looks ugly. The most serious problem that does not support the original firmware that is KW18_FLS_V2_0_B_1812251709. If someone had that version and could send it to me, please, it would be of great help to me. My email is [email protected]. From already thank you very much.
Hi
pbastidas said:
Dear Friends, I have the Kingwear KW18 watch and due to an error in the phone book, I updated the firmware with the one that has the Kingwear page and now the screen appears to me as out of date, and some colored boxes at the bottom. The clock works halfway, but it looks ugly. The most serious problem that does not support the original firmware that is KW18_FLS_V2_0_B_1812251709. If someone had that version and could send it to me, please, it would be of great help to me. My email is [email protected]. From already thank you very much.
Click to expand...
Click to collapse
Hi i try too get it but no way, if u have it please help me too
thanks a lot
Give me your email and I send the original to another user, I sent it ... load the original again and have the normal clock again
Related
hello
I have a RWATCH M26 and thinking it was internally equal to Elegance U8, installed the U8 firmware in order to have the language in Portuguese. Now the capacitive buttons are exchanged and all touch screen works in reverse.
Does anyone have the firmware for the M26 or can help me find it? I've contacted the seller, but has not
excuse my english
thank you
If you tell me how extract it, i can give you it
mscosta said:
hello
I have a RWATCH M26 and thinking it was internally equal to Elegance U8, installed the U8 firmware in order to have the language in Portuguese. Now the capacitive buttons are exchanged and all touch screen works in reverse.
Does anyone have the firmware for the M26 or can help me find it? I've contacted the seller, but has not
excuse my english
thank you
Click to expand...
Click to collapse
Hi,
how to extract and install new firmware?
I also like to know how to updatethis watch, can't find firmware
Anybody know where is stored picture that you create it over watch?
When i conect my m26 watch to PC, watch only charge, can't see internal storage.
does this have FM radio function?
Is there a 'Find My Phone' function, to buzz and locate the phone (within range)?
No fm radio but it does have the find my phone function
---------- Post added at 09:53 PM ---------- Previous post was at 09:40 PM ----------
My watches firmware is M26_OPT.FN2.V008 but how do I extract it
Tried connecting Bluetooth with my laptop it connected to like 4 different ports and audio mono and stereo s well as something else I forgot already still no idea how to grab the firmware
M26 Firmware, etc.
Look up the manufacturer on Google and send them a message.
MisterNatural said:
Look up the manufacturer on Google and send them a message.
Click to expand...
Click to collapse
Do you found out who is manufacturer?
I search and search, but can't find it
lolypop000 said:
Do you found out who is manufacturer?
I search and search, but can't find it
Click to expand...
Click to collapse
me too, can you even update this watch? I think for uwatch u8 more support . maybe this watch is just no update-able?
Rwatch M26 information
Found, using Google:
Alleged manufacturer--Go to GlobalMarket.com, and look up 'Shenzhen YQT Electronic Technology Co., Ltd.'. ALSO, there are two downloadable APK files (for configuration, etc.) in Google Play. Search 'Rwatch'. The product listing pictures are green circles.
I bought one of these. It works fine, IF you have patience.
MY problems with the product, as I live in the United States of America, are:
1. Poor grammar makes many parts of the instruction sheet and software difficult to understand. This is a common problem with TOO MANY products coming from China.
2. If you want to answer a call on your phone, swipe down on the upper edge, and tap to turn off Bluetooth, remember? This SHOULD be an automatic function so that the device used to answer a call keeps control of the call until it is finished.
3. Their website is only in CHINESE. This (among others) is an unprofessional mistake, and would have been prevented by preparation BEFORE their products were to be released for export.
4. Their advertising/product literature should contain links to software/websites.
If ANY manufacturer in China (or any other country in Asia) wants repeat business and significant market penetration in the USA, they should make sure there is a separate website and product software option for users to choose US-English. Instructions and website text should be written by someone who is FLUENT in US-English (and not someone who barely passed English in school OR using a translation site). There should be a clear separation and option to choose either US-English and Chinese text (in this case), on the device and website. The same applies to any other predominant language. Translation sites online do NOT work well, in all too many cases.
Personally, I am using this product as an inexpensive introduction to wearable technology (with my Sony Galaxy Note 4/AT&T VERSION). I have no intention of buying this brand again, unless there are significant improvements to features, flexibility, instructions, user information, software/firmware updates, and the FLUENCY of its website/software/instructions.
I WILL buy a more expensive, and feature-filled watch in 2015, to go with a new Samsung Galaxy Note 5.
I have never submitted a fully documented report to a client with anything other than impeccable grammar and spelling. It is a point of personal and professional pride. Anything less would be akin to halitosis and an insult to the recipient. We, as buyers, should expect the same consideration from overseas manufacturers.
I hope this reply is of help to you. By the way, I always allow for language gaps between individuals, and have infinite patience in that regard.. <wink>
Enjoy your new toy.
MisterNatural said:
.....
Click to expand...
Click to collapse
Thanks alot for your extende review! I completely agree with you and cant deny that other brands like Uwatch faces the same problems..
from all of those ''manufacturers'' I personally prefer ZGPAX. They also have videos on youtube and good site in English etc.
Rwatch M26 Manufacturer
I refer you to the first paragraph of my original post:
Alleged manufacturer--Go to GlobalMarket.com, and look up 'Shenzhen YQT Electronic Technology Co., Ltd.'.
Good Luck!
Any news about firmware for m26 ?
How do you do the difference between u8 and m26 ?
I thought I bought an U8 (aliexpress) but the firmware is M26 and the name of the watch when I sync BT is M26, i'm a little bit afraid about flashing u8 firmware ^^
m2 firmware
mscosta said:
hello
I have a RWATCH M26 and thinking it was internally equal to Elegance U8, installed the U8 firmware in order to have the language in Portuguese. Now the capacitive buttons are exchanged and all touch screen works in reverse.
Does anyone have the firmware for the M26 or can help me find it? I've contacted the seller, but has not
excuse my english
thank you
Click to expand...
Click to collapse
Hi,
you can try this firmware
Thank you, i'll try...
whojan said:
Hi,
you can try this firmware
Click to expand...
Click to collapse
thank you very much, this worked... you saved me!
Firmware update process??
I downloaded the zip file provided by member whojan however do not know the procedure for updating the firmware. I installed the usb driver and the watch is recognised as a serial port. However there does not appear to be a method to enable the firmware upgrade on the watch. With the watch connected by usb with its power switched off the pc detects it as a drive, unfortunately if I click on the drive I get asked to insert a disk.
I have version 9 of the firmware running on the watch, I recently met another person with the same watch running version 10. The main difference with 10 was the display was much brighter, with my current version 9 the display is unreadable under outside light conditions, would be great to get the update.
Software for R-watch m26
I found this page: http://pan.baidu.com/share/home?uk=3223452566&view=share#category/type=0
and this: http://yun.baidu.com/wap/shareview?...B03&page=1&num=20&fsid=61093581488136&third=0
anyone knows, how to backup watches??
(sorry for my English)
Hi! I've the M26_OPT.FN2.V011 firmware version, someone know if it's the last version, and how I can update it? And I use the M26 with my Galaxy Note 4 with lollipop 5.0.1 works good except the camera feature, find SM and I have FC with Mediatek smart device APK with all incoming calls! Does anyone have the same problems???
Eih guys, I've just buy a rwatch M28 and now I'm looking around to take as much infos as I can.
At this moment I know the last firmware version is M28_KHR.FN1.V009.zip (downloadable from a thread talking about U8 and M28 http://forum.xda-developers.com/showthread.php?t=2657970&page=84) and the best apk to use is mediateksmartdevice.apk but there is the m28-app.apk around the web.
I have a Blackberry q10 10.3 and I will let you how it works (if I will get the watch without problems I'll be able to test it in a month).
Do you guys has any experience want to write?
Do you guys think apk mentioned are ok?
Watch works perfectly on my Blackberry q10: you can answer a call (name of caller appears on screen), go into the address book and see call log, all from watch.
Only notifications don't work and I tryed every app in the web.
How is the screen brightness while reading the watch in outdoor conditions?
thank you!
Hello everyone,
I recently purchased a gt08 smartwatch by irulu off of Amazon. I have an iphone but wanted to get it fully integrated. Right now I can only receive call notifications. BluetoothNotifier app in cydia does not do anything but make the notification sound when an alert comes in from an app. Currently I cannot get texts to come up at all. Is there any way to get this integrated with iphone?
Are there also any alternate ROMs for this watch yet? For instance can I get android kit-kat running on it?
Any help would be greatly appreciated.
Try the mediatek smartdevice app .
ares93 said:
Try the mediatek smartdevice app .
Click to expand...
Click to collapse
I've tried that, but it does not see the device.
Did anyone find custom roms for this device?
I even looked on "needroms" but nothing. Maybe just the official rom but that's it.
try the app at the link below, it is the one designed for mtk6260A watches (as GT08)
https://play.google.com/store/apps/details?id=com.szfunyun.btnotification
as well you can flash any firmware designed for a mtk6260A like DZ09, GV08, LX36, Iradish Y6 etc, each of them has a different type of menu design, watch faces and so on
Yeah, the only thing is I have an iphone 5s
alwaysalicia said:
Yeah, the only thing is I have an iphone 5s
Click to expand...
Click to collapse
Unfortunately there is nothing to do... I'm sorry, natively mtk6260A is not able to interogate with iphone... maybe you can send it back and to choose another type smartwatch...
Hi there, I have released a new small utility - ReadBack Extractor - which could help any of you want to extract from a<Readback> ROM dump a full flawless firmware, to whom it may concern , check this link
http://forum.xda-developers.com/sma...readback-extractor-mtk6260-firmware-t3289272/
Good evening all,
At the beginning of the week I purchased this head unit, for my wife's car. The satnav on it (Primo) is great, and the wife loves it, but the settings, customisation and menus leave a lot to be desired. is it possible for someone to help me identify it, and find out if there is an alternative firmware available please?
Here is the only page that gives me any info about the unit what so ever!
imagescertificity.com
Many Thanks.
The brand is even mentioned on that page you link to: Eincar, with modell numbers and all.
see https://www.eincar.com/
Thanks I know its an eincar unit, but I'm unsure on which firmware I need and where I can find it. I cant see any firmware from their site.
karldonteljames said:
Thanks I know its an eincar unit, but I'm unsure on which firmware I need and where I can find it. I cant see any firmware from their site.
Click to expand...
Click to collapse
The first thing I would do is contact the supplier. They even have a live chat on their page (top right) and "Contact Us" at the bottom.
Did you already do that?
Hi Surfer63. I have, this was two days ago, I had to "leave a message" as their live chat was offline.
karldonteljames said:
Hi Surfer63. I have, this was two days ago, I had to "leave a message" as their live chat was offline.
Click to expand...
Click to collapse
I guess it is this one: https://www.eincar.com/car-dvd/2-di...ooth-car-stereo-autoradio-free-3g-dongle.html
No firmware to find.
I believe it is this one, https://www.eincar.com/car-dvd/2-di...l-include-reverse-camera-audio-autoradio.html
but on the menus on mine look different to the menus pictured in both the item you've linked to, and the one I have.
This is the one with the same menus etc. https://www.eincar.com/car-dvd/2-di...etooth-free-rear-camera-and-gps-map-card.html
I've ordered this one as it looks like there is far more customisations on this. (from what I've seen on youtube.) if that is no better, i'll send them both back.
Mod edit: Thread closed as a subject matter related one already exists
Xiaomi Haylou Solar aka LS05
So got the watch a day ago, first impressions are great, but im wondering if somebody successfully imported custom watch faces over to the new (non)Solar :)
forum.xda-developers.com
Regards Oswald Boelcke, Moderator
Hey ! anyone out there with an haylou solar ? searching for new faces to use ....
luismigueloliveira said:
Hey ! anyone out there with an haylou solar ? searching for new faces to use ....
Click to expand...
Click to collapse
yes is there any possibility?
luismigueloliveira said:
Hey ! anyone out there with an haylou solar ? searching for new faces to use ....
Click to expand...
Click to collapse
Hello. I'm using this watch, and we have big community at other russian forum.
Haylou Solar are have application which is closed to changing, so we can't modify it for our needs. And there's no any OTA update of firmware for watch, so we can't modify it.
So, there are two ways to modify watch: hack application (some people say that it's impossible) and ask developers to change something in application or firmware, i.e. to add watchfaces.
Contact information:
Customer Service:
[email protected]
At GooglePlay
Haylou Fit's developer:
[email protected]
Also you can place your feedback at Haylou Fit app (settings - feedback). This feature where added after sending many mails from russian users to developers, so there is a little hope, that they will develop their watches to the end. So, you can write them and describe your problems and that you want from watches. More mails - more chances that they will hear us.
@vadikdmc can you give me in private message an adress to this russian forum? I want to buy this smartwatch and read more informations.
Address forum
can you give me an adress to this russian forum? Please.
fercho192 said:
can you give me an adress to this russian forum? Please.
Click to expand...
Click to collapse
4pda.ru/forum/index.php?showtopic=988205
This is a link to the Russian forum about Haylou Solar
Finally, haylou solar got update firmware to v001947. Now we can apply watch faces from hayloufun app.
There are more dials in the hayloufit app!
I cannot Update my Haylou LS05 whenever i press Firmware upgrade it says latest version already installed my Current version is . V000854. Is there any solution for that
Same problem no firmware update yet? It's been a long time and there are some serious issues most importantly there is no option to turn off bluetooth on the watches. We dont have to exposure to radiation from the watches all the time. It's vital to be able to turn off bluetooth whenever we want for health and interference reasons.
no update here ....
Got a solution !!!
Follow carefully :
for the apk : h**ps://w*w.apkshub.c*m
It works like a charm !
Is there anybody who has korean rom for sola ls05???
Please help me
If anyone wants to know how to install .bin files(watchfaces) to haylou solar watch ,watch this video you can do it in small 6 steps.#haylou #haylousolar #ls05 #amazfitwatchfaces #bin file installation on haylou solar
www.watchfacebook.com – Smart watch faces sharIng platform
Smart watch faces sharing platform.
www.watchfacebook.com
watchfaces !
Hello! I'm having a problem with my Haylou Solar. Step counters and monitor calories often don't work. Is there a solution for my Haylou Solar?
hi everybody. anyone can know how to edit watch firmware to supporting counterclockwise watchface or modifying countdown timer to automatically counting down after reach zero? because this watch countdown timer is stopping after reach 00:00:00, and not counting down automatically.