hello
I have a RWATCH M26 and thinking it was internally equal to Elegance U8, installed the U8 firmware in order to have the language in Portuguese. Now the capacitive buttons are exchanged and all touch screen works in reverse.
Does anyone have the firmware for the M26 or can help me find it? I've contacted the seller, but has not
excuse my english
thank you
If you tell me how extract it, i can give you it
mscosta said:
hello
I have a RWATCH M26 and thinking it was internally equal to Elegance U8, installed the U8 firmware in order to have the language in Portuguese. Now the capacitive buttons are exchanged and all touch screen works in reverse.
Does anyone have the firmware for the M26 or can help me find it? I've contacted the seller, but has not
excuse my english
thank you
Click to expand...
Click to collapse
Hi,
how to extract and install new firmware?
I also like to know how to updatethis watch, can't find firmware
Anybody know where is stored picture that you create it over watch?
When i conect my m26 watch to PC, watch only charge, can't see internal storage.
does this have FM radio function?
Is there a 'Find My Phone' function, to buzz and locate the phone (within range)?
No fm radio but it does have the find my phone function
---------- Post added at 09:53 PM ---------- Previous post was at 09:40 PM ----------
My watches firmware is M26_OPT.FN2.V008 but how do I extract it
Tried connecting Bluetooth with my laptop it connected to like 4 different ports and audio mono and stereo s well as something else I forgot already still no idea how to grab the firmware
M26 Firmware, etc.
Look up the manufacturer on Google and send them a message.
MisterNatural said:
Look up the manufacturer on Google and send them a message.
Click to expand...
Click to collapse
Do you found out who is manufacturer?
I search and search, but can't find it
lolypop000 said:
Do you found out who is manufacturer?
I search and search, but can't find it
Click to expand...
Click to collapse
me too, can you even update this watch? I think for uwatch u8 more support . maybe this watch is just no update-able?
Rwatch M26 information
Found, using Google:
Alleged manufacturer--Go to GlobalMarket.com, and look up 'Shenzhen YQT Electronic Technology Co., Ltd.'. ALSO, there are two downloadable APK files (for configuration, etc.) in Google Play. Search 'Rwatch'. The product listing pictures are green circles.
I bought one of these. It works fine, IF you have patience.
MY problems with the product, as I live in the United States of America, are:
1. Poor grammar makes many parts of the instruction sheet and software difficult to understand. This is a common problem with TOO MANY products coming from China.
2. If you want to answer a call on your phone, swipe down on the upper edge, and tap to turn off Bluetooth, remember? This SHOULD be an automatic function so that the device used to answer a call keeps control of the call until it is finished.
3. Their website is only in CHINESE. This (among others) is an unprofessional mistake, and would have been prevented by preparation BEFORE their products were to be released for export.
4. Their advertising/product literature should contain links to software/websites.
If ANY manufacturer in China (or any other country in Asia) wants repeat business and significant market penetration in the USA, they should make sure there is a separate website and product software option for users to choose US-English. Instructions and website text should be written by someone who is FLUENT in US-English (and not someone who barely passed English in school OR using a translation site). There should be a clear separation and option to choose either US-English and Chinese text (in this case), on the device and website. The same applies to any other predominant language. Translation sites online do NOT work well, in all too many cases.
Personally, I am using this product as an inexpensive introduction to wearable technology (with my Sony Galaxy Note 4/AT&T VERSION). I have no intention of buying this brand again, unless there are significant improvements to features, flexibility, instructions, user information, software/firmware updates, and the FLUENCY of its website/software/instructions.
I WILL buy a more expensive, and feature-filled watch in 2015, to go with a new Samsung Galaxy Note 5.
I have never submitted a fully documented report to a client with anything other than impeccable grammar and spelling. It is a point of personal and professional pride. Anything less would be akin to halitosis and an insult to the recipient. We, as buyers, should expect the same consideration from overseas manufacturers.
I hope this reply is of help to you. By the way, I always allow for language gaps between individuals, and have infinite patience in that regard.. <wink>
Enjoy your new toy.
MisterNatural said:
.....
Click to expand...
Click to collapse
Thanks alot for your extende review! I completely agree with you and cant deny that other brands like Uwatch faces the same problems..
from all of those ''manufacturers'' I personally prefer ZGPAX. They also have videos on youtube and good site in English etc.
Rwatch M26 Manufacturer
I refer you to the first paragraph of my original post:
Alleged manufacturer--Go to GlobalMarket.com, and look up 'Shenzhen YQT Electronic Technology Co., Ltd.'.
Good Luck!
Any news about firmware for m26 ?
How do you do the difference between u8 and m26 ?
I thought I bought an U8 (aliexpress) but the firmware is M26 and the name of the watch when I sync BT is M26, i'm a little bit afraid about flashing u8 firmware ^^
m2 firmware
mscosta said:
hello
I have a RWATCH M26 and thinking it was internally equal to Elegance U8, installed the U8 firmware in order to have the language in Portuguese. Now the capacitive buttons are exchanged and all touch screen works in reverse.
Does anyone have the firmware for the M26 or can help me find it? I've contacted the seller, but has not
excuse my english
thank you
Click to expand...
Click to collapse
Hi,
you can try this firmware
Thank you, i'll try...
whojan said:
Hi,
you can try this firmware
Click to expand...
Click to collapse
thank you very much, this worked... you saved me!
Firmware update process??
I downloaded the zip file provided by member whojan however do not know the procedure for updating the firmware. I installed the usb driver and the watch is recognised as a serial port. However there does not appear to be a method to enable the firmware upgrade on the watch. With the watch connected by usb with its power switched off the pc detects it as a drive, unfortunately if I click on the drive I get asked to insert a disk.
I have version 9 of the firmware running on the watch, I recently met another person with the same watch running version 10. The main difference with 10 was the display was much brighter, with my current version 9 the display is unreadable under outside light conditions, would be great to get the update.
Software for R-watch m26
I found this page: http://pan.baidu.com/share/home?uk=3223452566&view=share#category/type=0
and this: http://yun.baidu.com/wap/shareview?...B03&page=1&num=20&fsid=61093581488136&third=0
anyone knows, how to backup watches??
(sorry for my English)
Hi! I've the M26_OPT.FN2.V011 firmware version, someone know if it's the last version, and how I can update it? And I use the M26 with my Galaxy Note 4 with lollipop 5.0.1 works good except the camera feature, find SM and I have FC with Mediatek smart device APK with all incoming calls! Does anyone have the same problems???
Related
Hello, the two smartwatches bring the same MTK chip. I think you can install any firmware factory for either . But I 'm looking zgpax FIRMWARE s29 . If anyone has the firmware please put a link or something to download and install.
I tried to install app with extension .vxp , tells me this ok , but not the application Appears in any place (appears mre folder name) , anyone know how to install ?.
thanks
Let's hope that ypu will have an aswer, personally I'm having no hope. Maybe they have the same hardware, but firmware is different, for exemple, on my S29 I don't have the dropdown list with notification, when I slide it down, I get the pedometer.
Maybe (I said "maybe" ) let's hope we can put S28 firmware on S29, in that way we can turn airplane mode ON and save some battery when we use the smartwatch without a SIM card
How you install applications? ??
How can I read ROM from one watch and write to another?
wallpaper
how can i change the wallpaper?
thks
Can't install app either
korili said:
Hello, the two smartwatches bring the same MTK chip. I think you can install any firmware factory for either . But I 'm looking zgpax FIRMWARE s29 . If anyone has the firmware please put a link or something to download and install.
I tried to install app with extension .vxp , tells me this ok , but not the application Appears in any place (appears mre folder name) , anyone know how to install ?.
thanks
Click to expand...
Click to collapse
I was also able to get a .vxp onto my S29, but I receive the following error when trying to Install the app: "Failed to start application"
Has anyone else tried installing vxp apps on the S29? Any assistance would be appreciated.
there is no way to put apps, its like a feature phone, only thru firmware updates
On some store sites, it says the S28 is capacitive and the S29 is resistive touch screen, can you confirm either is true?
I doubt it's resistive touch. That's really old tech.
airplane mode + bluetooth
gabib77 said:
Let's hope that ypu will have an aswer, personally I'm having no hope. Maybe they have the same hardware, but firmware is different, for exemple, on my S29 I don't have the dropdown list with notification, when I slide it down, I get the pedometer.
Maybe (I said "maybe" ) let's hope we can put S28 firmware on S29, in that way we can turn airplane mode ON and save some battery when we use the smartwatch without a SIM card
Click to expand...
Click to collapse
hi! i want to know if on zgpacx s29 in can put airplane mode and bluetooth on. i can do this?
Source Code?
winol said:
there is no way to put apps, its like a feature phone, only thru firmware updates
Click to expand...
Click to collapse
Do you know what the ZGPAX S29 OS is based on or know where I can get my hands on the source code?
Thanks!
jacquesbl said:
Do you know what the ZGPAX S29 OS is based on or know where I can get my hands on the source code?
Thanks!
Click to expand...
Click to collapse
I think that I saw somewhere that many of these bluetooth watch devices that utilize the same chip run on Nucleus OS which I think is closed source. I don't know the specifics of this particular watch. Other websites say that this watch runs on custom OS written by ZGPAX. I hope that you are able to get the source code and make the watch even better. Good luck!
kravmama1 said:
I think that I saw somewhere that many of these bluetooth watch devices that utilize the same chip run on Nucleus OS which I think is closed source. I don't know the specifics of this particular watch. Other websites say that this watch runs on custom OS written by ZGPAX. I hope that you are able to get the source code and make the watch even better. Good luck!
Click to expand...
Click to collapse
Thank you! I will do some more investigating. Hopefully I can find something.
Eih guys, I've just buy a rwatch M28 and now I'm looking around to take as much infos as I can.
At this moment I know the last firmware version is M28_KHR.FN1.V009.zip (downloadable from a thread talking about U8 and M28 http://forum.xda-developers.com/showthread.php?t=2657970&page=84) and the best apk to use is mediateksmartdevice.apk but there is the m28-app.apk around the web.
I have a Blackberry q10 10.3 and I will let you how it works (if I will get the watch without problems I'll be able to test it in a month).
Do you guys has any experience want to write?
Do you guys think apk mentioned are ok?
Watch works perfectly on my Blackberry q10: you can answer a call (name of caller appears on screen), go into the address book and see call log, all from watch.
Only notifications don't work and I tryed every app in the web.
How is the screen brightness while reading the watch in outdoor conditions?
thank you!
Hello there everyone so as many of you may know or own watches like the various makes of the dz09 and others have the same software and Samsung s look with slight differences like icon style and background.this makes my wonder ,how hard it would be to change the software ? because if the various company's can add backgrounds and watch faces why can't we.I have no knowledge of coding so I'm entrusting you the community to figure out how to mod these watches. A lot of them have micro SD slots and micro usbs to transfer data or hacks to change them and a lot of the ones with SD cards have a file browser so I can't imagine its that hard to use the file browser and explore the watches root directories the software isn't open source though so get creative I guess
Good luck!!!
I'm wondering about this as well. I just saw your post after posting my own thread about changing the firmware or adding new watch faces to my DZ09 smartwatch. I have only one link (that was pretty hard to find) that could help you with this:
niezarmsan.blogspot.my/2015/12/how-to-install-firmware-on-dz09-mtk6260.html
See how it goes if you're going to try flashing it, and please make sure to tell me about it. Thanks!
Never mind. Misread OP. Please delete.
SkullPumper said:
I'm wondering about this as well. I just saw your post after posting my own thread about changing the firmware or adding new watch faces to my DZ09 smartwatch. I have only one link (that was pretty hard to find) that could help you with this:
niezarmsan.blogspot.my/2015/12/how-to-install-firmware-on-dz09-mtk6260.html
See how it goes if you're going to try flashing it, and please make sure to tell me about it. Thanks!
Click to expand...
Click to collapse
Hi thanks alot for this reference i'll have a try soon see where it leads!
peath1 said:
Hello there everyone so as many of you may know or own watches like the various makes of the dz09 and others have the same software and Samsung s look with slight differences like icon style and background.this makes my wonder ,how hard it would be to change the software ? because if the various company's can add backgrounds and watch faces why can't we.I have no knowledge of coding so I'm entrusting you the community to figure out how to mod these watches. A lot of them have micro SD slots and micro usbs to transfer data or hacks to change them and a lot of the ones with SD cards have a file browser so I can't imagine its that hard to use the file browser and explore the watches root directories the software isn't open source though so get creative I guess
Good luck!!!
Click to expand...
Click to collapse
Already the watch-faces are replaceable, how do you like the first xda concept for mtk6260A watchphones?
Very Nice!
How can you push this to a generic U8 clone?
Details of my watch below, obtained thru code *#8375#
Version MAUI.11C.W13.52 MP.V2.F24
Branch 11CW1352MP
U8_EN_WELCOME
BUILD: BUILD_NO
SERIAL#:
BUILDTIME 2015/10/29 9:27
MRE VERSION 3100
HAL_VERNO:
BAROMETER: CPS121
abuvipin said:
Very Nice!
How can you push this to a generic U8 clone?
Details of my watch below, obtained thru code *#8375#
Version MAUI.11C.W13.52 MP.V2.F24
Branch 11CW1352MP
U8_EN_WELCOME
BUILD: BUILD_NO
SERIAL#:
BUILDTIME 2015/10/29 9:27
MRE VERSION 3100
HAL_VERNO:
BAROMETER: CPS121
Click to expand...
Click to collapse
For a U8 clone, I haven't studied yet its firmware, tell me what kind of processor has your watch, eventually do the steps from tutorial I posted here on this page link, or send me a firmware and let me get a look
Hello everyone,
I recently purchased a gt08 smartwatch by irulu off of Amazon. I have an iphone but wanted to get it fully integrated. Right now I can only receive call notifications. BluetoothNotifier app in cydia does not do anything but make the notification sound when an alert comes in from an app. Currently I cannot get texts to come up at all. Is there any way to get this integrated with iphone?
Are there also any alternate ROMs for this watch yet? For instance can I get android kit-kat running on it?
Any help would be greatly appreciated.
Try the mediatek smartdevice app .
ares93 said:
Try the mediatek smartdevice app .
Click to expand...
Click to collapse
I've tried that, but it does not see the device.
Did anyone find custom roms for this device?
I even looked on "needroms" but nothing. Maybe just the official rom but that's it.
try the app at the link below, it is the one designed for mtk6260A watches (as GT08)
https://play.google.com/store/apps/details?id=com.szfunyun.btnotification
as well you can flash any firmware designed for a mtk6260A like DZ09, GV08, LX36, Iradish Y6 etc, each of them has a different type of menu design, watch faces and so on
Yeah, the only thing is I have an iphone 5s
alwaysalicia said:
Yeah, the only thing is I have an iphone 5s
Click to expand...
Click to collapse
Unfortunately there is nothing to do... I'm sorry, natively mtk6260A is not able to interogate with iphone... maybe you can send it back and to choose another type smartwatch...
Hi there, I have released a new small utility - ReadBack Extractor - which could help any of you want to extract from a<Readback> ROM dump a full flawless firmware, to whom it may concern , check this link
http://forum.xda-developers.com/sma...readback-extractor-mtk6260-firmware-t3289272/
I have a unknown assumed Android head unit that I am in need of firmware, and instructions to install it. I took as many pictures as I could, and tried to research old invoices, email, and eBay purchase history to no avail on a model number. There are no markings on the case, the only markings on inside, and have been pictured. I combed Google using text, and images, still nothing. It looks like a tablet PCB soldered to a generic stereo. I am looking to change the firmware in this unit as its current firmware is virtually useless. Any help is appreciated. I am also not opposed to just installing anything that will work then using apps to control the radio hardware, if that is possible.
Well I can't seem to post images, maybe I am just a typical noob. My bad in advance.
If it´s really a RK2928, you should spare your time.
For pictures: You need to have some postings to be allowed to share pictures.
Just upload them to Google, Dropbox or similar and post the link to your pics.
rigattoni said:
If it´s really a RK2928, you should spare your time.
For pictures: You need to have some postings to be allowed to share pictures.
Just upload them to Google, Dropbox or similar and post the link to your pics.
Click to expand...
Click to collapse
Thank you for the advice. It was purchased by my in-laws back in '17. I was just looking for a project piece. Ill attempt to add the dropbox link here: /sh/ffmd8gvniw0ar3d/AACgeG2zlYeEcI-XpeuSm2UAa?dl=0[/url]
I´ll post the corrected link to your unit, because the forum SW just cuts it off automatically.... https://www.dropbox.com/sh/ffmd8gvniw0ar3d/AACgeG2zlYeEcI-XpeuSm2UAa?dl=0&preview=IMG_0310.jpeg
This is a Win CE unit, from what I can see on the first pic. See the first icon which is the Windows symbol.
Nevertheless.... Nothing to update for this oldie.... at least not at XDA.
Let it RIP or use it as FM radio elsewhere.