I have a set of bullets wireless 2 and a 6t TMobile variant somehow the pop-up that shows when you separate them does not show up and it does not resume auto play. It is the tap to pair feature
Related
I can't connect my Nexus 4 with CM11(kitkat) to my Samsung Smart TV.
1. I select the option Screen Mirroring on the TV, it's says that it's waiting for the device so...
2. Settings>Display & lights>Screen Cast and there is the tv under the name [TV]Bed room
3. Select the TV and say connecting to Android_abc.. then Android_abc is connected and after 1 or 2 seconds the Screen Mirroring Close with the message: Screen Mirroring has terminated or finalazed (it's in spanish so..)
On developer options the option of HDCP - DRM I chose: Never. I read somewhere that with CM that option would work.
When I active the certification for the wireless screen, when I select the tv I send a message with a PIN then I recieve a message from the tv with another PIN.
Sometimes the tv show me a PIN that I should write on my device so the pop-up appears and I write the PIN but in all the cases th Screen Mirroring close.
PS: cm-11-20131217-NIGHTLY, update it today 12/18
Same problem over here... I read that we should use the "AllShare Cast" app from samsung for samsung devices. However this app was adapted for other devices but I find only dead link now...
Anyone running Official KitKat or Custom 4.4 based ROM seeing in Settings>Display>Cast Screen option?
Yes, it is for streaming your display to a Miracast compatible TV, etc.
From Nexus site:
Some of this information applies only to devices running Android 4.4.
Nexus 4, Nexus 5, Nexus 7 (2013), Nexus 10, and HTC One Google Play edition are compatible with devices that support the Wi-Fi Certified Miracast™ protocol for wireless display. To turn on the wireless display feature, go to SNP_BEE8810A5FCD80173673B4B15A1804EAEE99_3529219_en_v0Settings > Device > Display > Cast screen > SNP_2918040_en_v1 Menu, then check the box next to “Enable Wireless Display.”
You can cast the screen to wirelessly stream video and audio to a variety of displays and other devices that support Miracast - even when a standard Wi-Fi network isn’t available. For example, you can cast the screen to show your device’s screen on a TV equipped with a certified Miracast adapter.
For more information, see the documentation that comes with the Miracast-certified device you wish to use with your tablet or phone.
If one is lucky enough to have a rootled Google ChromeCast with the Team Eureka Custom ROM this feature is coming if you that option in your Display Settings. I'm not going back to stock just for that but just wondered if the N10 had it also.
I have a Nexus 10 running stock rom rooted. I can confirm it has this feature & working.
my nexus 7 not showing the option of enable wireless display
I have nexus7 and I have updated it to kitkat4.4.4 version on cast screen when I go to menu to select enable wireless display option so there is no option written enable wireless display but help option is coming
After reading through the general Appradio Unchained thread for several hours, I've realized that Appradio in general is device specific in many ways. This became especially apparent after I tried using an Android device Pioneer lists as being compatible with Appradio to no avail. The Nexus 7, and the Nexus series in fact, is not listed as supported by Pioneer but the Nexus 5 and Nexus 7 have been confirmed compatbile by many users. Pioneer hasn't even updated their compatibility list in 27 months:
pioneerelectronics com/PUSA/Car/AppRadio/AppRadio+Compatible+Devices
My current hardware:
Pioneer 4000NEX, completely stock
Axxess ASWC-1
Nexus 7 (2013)
Analogix SlimPort adapter
Mediabridge ULTRA Series HDMI Cable (6 Feet) - High-Speed Supports Ethernet, 3D and Audio Return [Newest Standard]
OEM USB charging cable
N7 Software
PureROM-4.4.4-KTU84Q-7-28-14.zip
pa_gapps-stock-4.4.4-20140818-signed.zip
ES File Explorer from Play store
ARU 0.16
CarKeyboard from Play store
4000NEX Smartphone settings: Other, HDMI
ARU Settings:
General > all checked
Keyboard > Change Input Method > CarKeyboard checked, open keyboard settings screen > carKeyboard checked
ARU > Rotation Locker checked, Start GPS Injector checked
Region setting: United States
N7 Bluetooth settings: Connected via phone and media
I then plugged in SlimPort adapter. On the home screen on the 4000NEX, the App button no longer had an X and touching it brought me to a new window, the Appradio window. After the BT connection reestablished itself with the new protocol, the N7 screen appeared on the 4000NEX!
Problems: The screen is very distorted. The y axis is reduced, making the image appear squashed.
Rotation locker doesn't seem to work, as the native rotation on the N7 is carried over to the 4000NEX; if the N7 is upside down, the 4000NEX displays the image right side up but inverts the touch input! Here's a video showing the issue:
dropbox com/s/fqlyega9de22gj3/2014-08-21%2016.50.07.mp4
Does anyone else have any experience with ARU or Appradio in general?
Hello,
I have ordered an ADT-1 from eBay and I have a question about initial setup. I have connected my ADT-1 to my TV via HDMI, the network connection via Ethernet, but I'm trying to figure out how to set up going through the on-screen menu.
On my TV screen, the first screen are language options - if it came with a remote, I would just press "OK" and I assume it would prompt me through everything. I have tried installing the "Android TV Remote Control", but it seems to install on my Galaxy Note 3, it detects the ADT-1 on the network, but then the app continuously crashes making the remote unusable.
I guess my question is how, or what do I need to go through the initial setup of the ADT-1 on my TV screen? Do I need to break out my Logitech remote from the basement and see if the ADT-1 is in its database? Or is there another way to set this up through the OSD?
Thanks in advance
I am unable to connect to a Microsoft Wireless Display Adapter version 1. I updated firmware on miracast device to latest available but it still wont connect for more that few seconds. I am using the samsung smart view on quick settings. Any suggestions to get this to work? a different app or settings? need miracast because I don't have a wifi network connection where i am using the phone. if someone has an MS wireless display adapter v2, can the s8 cast to that?
Thanks for any advice.
I have the same problem. Typing code. Then a mirror that plugs into the S8 Galaxy and disconnects.
What is the solution?
tested version 2 and it wont connect either.
I can tell you that it casts flawlessly to chromecast v2. Maybe will be worth an upgrade to that?
I have the galaxy s7 edge and could connect using an app from the app store called Miracast Display Finder. However on the Galaxy s8 i cannot connect.
---------- Post added at 11:32 PM ---------- Previous post was at 10:54 PM ----------
I was able to get my galaxy s8 plus to successfully connect to the Microsoft Wireless Display Adapter V2. I even watched a movie that I had on my device that was aprox.. 1.5 hrs with no issues!
To get it to work, I had to hold the reset button on the Microsoft Wireless Display Adapter for 10 seconds to reset it. After 15 mins of it saying that it is restarting i got impatient and I unplugged it. Once booted back up it connected fine using the built in "Smart View" quick toggle in the notification area. Keep in mind that this setting is normally at end of the quick toggles list. You can find it by pulling down twice on the notification bar, and then swiping the quick toggles left, then click "Smart View". Make sure your Display Adapter is connect to the TV/Device prior to and it'll show up as an option to "miracast" to.
Just in case anyone is wondering, I have the stock latest firmware AT&T Samsung Galaxy S8+ G955USQS1AQG1 and the Microsoft Wireless Display Adapter V2 with Firmware version: 2.0.8372.
I have Microsoft Surface Pro 4 Tablet and Microsoft Wireless Display Adapter connected to my Samsung Smart 55" Curve TV with current firmware V2.0.8372 installed on tablet BUT I CAN NOT CONNECT MY TABLET / ADAPTER TO TV? Please offer solution. Thanks
Hello,
I had similar issues.
I fixed it by updating the firmware on the M$ Wireless device to 1.3.8365.
To do this, get a Windows 10 PC. Download the Microsoft Wireless Display Adapter application from the M$ store. Connect to the device and you should have an option to update firmware.
Easy....once you know that the firmware can be updated.
John