Related
First of all, I wanted to apologize if I'm posting at a wrong section but please do move this thread if necessary.
Second, I know some of you have already read a bunch of problems regarding to this model of zenfone 5 but I'm still hoping that one day someone can help us A500KL users. I've spent sleepless nights browsing the internet for solutions. I've been through different websites like taiwanese, chinese, russian and many more but still can't seem to find any guides or solution to my problem.
The thing is, one day after booting my phone and making it to home screen a few seconds later it's restarting on it's own. restarted and same thing happened over and over again. I didn't mind losing my files so i went to recovery to do a factory reset hoping it will resolve the problem. But the moment I press enter, a bunch of errors saying E:failed to mount...... (invalid argument) showed up. It failed wiping to factory reset. i tried wiping cache but still gets a bunch of those error. I know little about flashing so I came to a place where they said that i have to download the stock firmware from asus website with the same version and same SKU. so i did that and stored the stock rom on my external SD card (can't save in internal since I can't boot to homescreen anymore. Just ending up in Asus logo loading forever.) but still no luck. I Searched some more and found a guide about flashing using AFT. I tried but still no luck, says it needs a .raw firmware. unfortunately anywhere i go there is no .raw firmware for my phone. so I explore some more and came across about bootloader. but recently i found out that my bootloader is locked. Neither can I flash using sideload.
My phone is not rooted, no custom recovery installed, no option to install update from ADB and can't install from recovery. BUT still able to go to recovery, boot until asus logo, when charging battery icon still shows. still vibrates when powered.
I really hope someone out there can help me with my current problem. I still think this can be done cause i don't think theres a problem with the hardware. Been searching for days and I really need to recover my phone. Oh and not to mention there are 2 more of this phone on my relatives and all of them have the same problem. So please help us A500KL users. Sorry for the long message, I'm just so desperate to recover my phone. God Bless
hi bro
well firstly bootloader unlock is NOT needed for sideloading stock firmware.i'm giving you the link to one of my tutorials,follow the procedure carefully.note one thing that do NOT download the firmware whose link is given in tutorial,instead use kitkat firmware of your phone(download from asus support page)....use only kitkat firmware pls.coz my experience says that flashing lollipop directly gives errors.http://forum.xda-developers.com/zenfone-5/help/bootlooped-bricked-returning-to-stock-t3358662
[email protected] said:
hi bro
well firstly bootloader unlock is NOT needed for sideloading stock firmware.i'm giving you the link to one of my tutorials,follow the procedure carefully.note one thing that do NOT download the firmware whose link is given in tutorial,instead use kitkat firmware of your phone(download from asus support page)....use only kitkat firmware pls.coz my experience says that flashing lollipop directly gives errors.http://forum.xda-developers.com/zenfone-5/help/bootlooped-bricked-returning-to-stock-t3358662
Click to expand...
Click to collapse
That method only work for A500/501 cg models. Not A500KL .It will not work. I already came across this problem. There is NO RAW FIRMWARE FOR ZENFONE 5 LTE
ChristopherXI said:
That method only work for A500/501 cg models. Not A500KL .It will not work. I already came across this problem. There is NO RAW FIRMWARE FOR ZENFONE 5 LTE
Click to expand...
Click to collapse
but when did i say that you need raw firmware??
what we are doing is flashing fastboot,recovery and then sideloading the zip firmware which is available on asus website...
[email protected] said:
hi bro
well firstly bootloader unlock is NOT needed for sideloading stock firmware.i'm giving you the link to one of my tutorials,follow the procedure carefully.note one thing that do NOT download the firmware whose link is given in tutorial,instead use kitkat firmware of your phone(download from asus support page)....use only kitkat firmware pls.coz my experience says that flashing lollipop directly gives errors.http://forum.xda-developers.com/zenfone-5/help/bootlooped-bricked-returning-to-stock-t3358662
Click to expand...
Click to collapse
Hello bro.. your tutorial is well said but unfortunately Zenfone 5 LTE is different. Yes i do have a firmware downloaded at the official asus website and it doesn't contain any recovery.img and fastboot.img there's only boot.img inside. and yes its only kitkat. its WW 11.4.6.94
Lastly, zenfone 5 LTE doesn't have "apply update from ADB" option in recovery by default so sideloading is not really possible. I can only depend on fastboot with locked bootloader. so yeah that makes things difficult.
[email protected] said:
but when did i say that you need raw firmware??
what we are doing is flashing fastboot,recovery and then sideloading the zip firmware which is available on asus website...
Click to expand...
Click to collapse
You din't get what i mean.... His system partition is MESSED UP. The partition also contains fastboot and recovery partition. Flashing fastboot and recovery WILL FAIL. He will have to find AND RAW FIRMWARE NOT A ZIP FIRMWARE FROM ASUS.
I already searched for Raw firmware for zenfone 5 lte. There is no raw firmware for that model. Using that guide requires the raw firmware. In the process that tool will use the RAW firnware to fix the partition table.
Hopes that clears everything up
Hi Bazerald,
My 18-month old A500KL has exactly the same problem as you had described - startup never get pass the Asus logo screen, got a bunch of "E: failed to mount ....." error messages in Recovery. I was told by the Asus Service Centre technician that the problem was caused by a broken ROM and to revive the phone, a replacement of the mother board was required and they were charging megabuck for the job. I ended up taking my phone back without fixing and here I am browsing in this forum hoping to find an alternative solution.
Since I know everything else on my A500KL is still working except the internal ROM, what I am hoping to do is to find if there is a way to load the stock firmware onto an external SD card and boot up the phone from there, in other words, I would like to swap the internal and external memory. I can find a few discussions on this topic for the Samsung Galaxy, but I have yet to find a viable solution for our A500KL.
Any member has any suggestion on this idea?
ChristopherXI said:
You din't get what i mean.... His system partition is MESSED UP. The partition also contains fastboot and recovery partition. Flashing fastboot and recovery WILL FAIL. He will have to find AND RAW FIRMWARE NOT A ZIP FIRMWARE FROM ASUS.
I already searched for Raw firmware for zenfone 5 lte. There is no raw firmware for that model. Using that guide requires the raw firmware. In the process that tool will use the RAW firnware to fix the partition table.
Hopes that clears everything up
Click to expand...
Click to collapse
hi friend
i'm really sorry,i just somehow missed the line saying that he has system error..
thanks for noting
Toki Yoki said:
Since I know everything else on my A500KL is still working except the internal ROM, what I am hoping to do is to find if there is a way to load the stock firmware onto an external SD card and boot up the phone from there, in other words, I would like to swap the internal and external memory. I can find a few discussions on this topic for the Samsung Galaxy, but I have yet to find a viable solution for our A500KL.
Any member has any suggestion on this idea?
Click to expand...
Click to collapse
I agree, I was hoping for the same thing here since xda is very popular for fixing tons of problems. I guess we'll just have to wait for THE ONE who can help us.. since A500KL doesn't seem have a raw firmware I'll be very happy if anyone can spend a time and make a raw firmware for us (if it's possible). Recovering the 3 A500KL here will be very rewarding.
Also, I'm trying to not depend too much on the raw firmawre cause the main reason is the messed up partition. Still searching for a way to fix it manually and getting some ideas on how it is done on other phones.
Unless you guys found a RAW firmware for the LTE model. It's preety much hopeless. Sorry........
does anyone know if repartitioning the messed up partition of A500KL manually is possible?
I got the same problem a few months ago. I searched through the Internet and found that many many people having such problem, I concluded that it is the quality of the chips (usually 15 months of usage), not software problem alone (the phone just died suddenly, I did nothing at all!!). This was the first time I had hardware failure in phones (in the past 20 years!). I WILL NEVER BUY ASUS phone again.
Ok guys, give me a sec and i'll find the firmware. Theres one on the website thats a revert firmware that will fix it. I had the same issue with mine. This firmware will revert it back to Kitkat. Yes.. Its DOES have the stock Recovery,Boot.img and System.img files.
This is the firmware your looking for Version WW_11.4.6.94 (Downgrade Version)
http://www.asus.com/us/support/Download/39/1/0/6/8/
ONLY FLASH THAT VERSION! Only Version WW_11.4.6.94 (Downgrade Version) (WorldWide) Version..
Only the Downgrade Versions have the complete files needed to repair a bad flash or root attempt.
Follow the directions Vaib posted on the previous page, but use the firmware file above.
Should fix the software,recovery and partition issue. Also, the bootloader unlock provided by Asus is hit and miss.
I've used it to root,but alot of the files are interlinked. So you run the risk of another app not working when trying to debloat the rom. As of now there is no Alternate non Stock Rom for the A500KL. Note: After flashing the WW firmware you phone will be recognized as an Asus "T00P". This is normal and doesnt cause any issues.
If all else fails, go here for more info on the A500KL. http://www.asus-zenfone.com/search/label/Zenfone 5 LTE
Good Luck. Happy Flashing
TabascoTX said:
Ok guys, give me a sec and i'll find the firmware. Theres one on the website thats a revert firmware that will fix it. I had the same issue with mine. This firmware will revert it back to Kitkat. Yes.. Its DOES have the stock Recovery,Boot.img and System.img files.
This is the firmware your looking for Version WW_11.4.6.94 (Downgrade Version)
http://www.asus.com/us/support/Download/39/1/0/6/8/
ONLY FLASH THAT VERSION! Only Version WW_11.4.6.94 (Downgrade Version) (WorldWide) Version..
Only the Downgrade Versions have the complete files needed to repair a bad flash or root attempt.
Follow the directions Vaib posted on the previous page, but use the firmware file above.
Should fix the software,recovery and partition issue. Also, the bootloader unlock provided by Asus is hit and miss.
I've used it to root,but alot of the files are interlinked. So you run the risk of another app not working when trying to debloat the rom. As of now there is no Alternate non Stock Rom for the A500KL. Note: After flashing the WW firmware you phone will be recognized as an Asus "T00P". This is normal and doesnt cause any issues.
If all else fails, go here for more info on the A500KL. http://www.asus-zenfone.com/search/label/Zenfone 5 LTE
Good Luck. Happy Flashing
Click to expand...
Click to collapse
Tabasco , WW_11.4.6.94 (Downgrade Version) did not have recovery.img and fastboot.img inside as well.
kenooi1984 said:
Tabasco , WW_11.4.6.94 (Downgrade Version) did not have recovery.img and fastboot.img inside as well.
Click to expand...
Click to collapse
It should have, unless i accidentally linked to the wrong one. Let me see what happened.
The downgrade version should have recovery and fast-boot. It kicks it from L to KK. Since the fast-boot and recovery aren't compatible from L to KK, it should flash it. When i boot looped mine trying to a flash an alternate recovery i re-flashed using the downgrade version to fix it. I guess possibility that it could be in another WW Version, but im pretty sure i remember flashing the first WW Downgrade. I'm going to look at WW_11.4.6.71 and see if it in there.
OK, WW_11.4.6.71 has a script to install recovery. So the recovery.img is in the firmware somewhere. Try WW_11.4.6.71 instead and see if that fixes it for you.
TabascoTX said:
It should have, unless i accidentally linked to the wrong one. Let me see what happened.
The downgrade version should have recovery and fast-boot. It kicks it from L to KK. Since the fast-boot and recovery aren't compatible from L to KK, it should flash it. When i boot looped mine trying to a flash an alternate recovery i re-flashed using the downgrade version to fix it. I guess possibility that it could be in another WW Version, but im pretty sure i remember flashing the first WW Downgrade. I'm going to look at WW_11.4.6.71 and see if it in there.
Click to expand...
Click to collapse
thanks for tried to check , i downloaded WW-11.4.6.107 it did not have it either.
due to my super slow internet speed ,it took me abt 3 hours to downloaded 1 firmware....... i wish to download all to check but...... poor me..
kenooi1984 said:
thanks for tried to check , i downloaded WW-11.4.6.107 it did not have it either.
due to my super slow internet speed ,it took me abt 3 hours to downloaded 1 firmware....... i wish to download all to check but...... poor me..
Click to expand...
Click to collapse
OK, WW_11.4.6.71 has a script to install recovery. So the recovery.img is in the firmware somewhere. Try WW_11.4.6.71 instead and see if that fixes it for you.
The recovery isnt exactly named recovery.img, there's a script that refers to installing the recovery from another location. So i'd try flashing the downgrade version after getting the phone into fastboot. And unfortunately it can be difficult to tell if the phone is actually in fastboot.
TabascoTX said:
OK, WW_11.4.6.71 has a script to install recovery. So the recovery.img is in the firmware somewhere. Try WW_11.4.6.71 instead and see if that fixes it for you.
Click to expand...
Click to collapse
ok thanks , will try it later on.
Wow.
You people really didn't read the comments section throughly.
Trying normal or downgrade firmware will not work.
This procedure requires a RAW firmware.
And using the offline update tool provided by @dgadelha.
If any of you found a RAW firmware for the A500KL model.
You can easily adapt the script from his Offline update tool.
It will repartition the device.
AGAIN. trying normal firmware is not going to fix the problem
@Bazerald (i think that your a500kl is WW) Try: with stock recovery try wipe the phone (data, cache), flash the firmware downloadable from asus site UL-ASUS_T00P-WW-11.4.6.94-user, (not the downgrade version), if not success, try UL-ASUS_T00P-WW-12.4.5.22
Hi M3 users,
I'm a long time lurker and reader on XDA. Now it's time to give something back or at least participate
Following my recent M3 purchase a dugg a bit deeper into this topic and tried to get us the stock recovery for our devices.
I'm not really a dev. I just used the information I found here and in the russian forum where greatslon (thank you guy) is posting his work.
If you find an error in the process please let me know. The files have not been tested in any way. I have no idea if this would even work (encryption and so on).
So I managed to extract the recovery.img file from the chinese rom. This method will also work for the LTE variant.
Maybe @greatslon or @somboons can share their view on the topic or maybe @somboons can even use it in his tool.
Resources
http://4pda.ru/forum/index.php?showtopic=780572&st=120
http://forum.xda-developers.com/showthread.php?t=2433454
http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Tools used
Huawei Firmware Finder (Team MT)
Huawei Update Extractor
Download
M3_BTV-W09C233B019_recovery.zip
Process
1. Start firmware finder (did use the android version)
2. Change device to BTV-W09C233
3. Downloaded the firmware B019 for BTV-W09C233 (no firmware for other variants present ATM)
4. Extracted and copied update.app to SD card
5. copy to PC
6. Extract recovery.img and recovery2.img using Huawei Update Extractor
Best regards,
Benjamin
Don't quite understand what's this for. First of all, recovery should be the same version as your ROM. I don't know if their mismatch will immediately lead to some malfunction, but some people on 4pda said they should match. Second - stock recovery's functions are limited to factory reset (wiping data, cache, etc.) and installing OTA updates. Without changing OEMINFO (and it's still unconfirmed), you won't be able to install any OTA except those, intented for your model and region, so again there's no need to install a higher version of recovery than your ROM is. But anyway, thank you for the extraction instruction.
P.S. I think there's no need to flash both recovery and recovery2. Recovery2 can be successfully replaced with TWRP and this combination is really great, cause you can launch TWRP by holding Volume Up button only.
And the only reason why you should keep recovery original is that it doesn't really wipe /data - it also creates some files there like custom.bin, containing your regional settings.
Hi Slavon,
Thanks for your highly appreciated comment. @somboons was looking for a stock recovery so I thought this might help.
Your given information are really helpful. I did not know that you could flash TWRP in recovery2 and replace erecovery Handy information.
I'm pretty new to the Huawei structure so always glad to learn something.
EDIT
A lot of good information can be found here: http://forum.xda-developers.com/honor-7/general/dual-recovery-honor-7-t3308398
Thank you very much,
sselpeelsxx
Giving Back
Benjamin,
I've also been a long time XDA lurker. Most of the devices I have owned were mainstream and thus already had a very active XDA developer community; Even if root had yet to be achieved, there would be hundreds of messages on the topic.
It seems the Mediapad M3 is just getting started. I am a developer of over 20 years, but very little android experience. However, I have recently spent a considerable amount of time (about 50-100 hours) working with the low level ADB protocol source code. And I have rooted and flashed no less than 50 devices, everything from cell phones to Android TV devices to routers.
I'm going to take this device on as my first real dev effort in this arena.
I have a few goals:
1. Get working backups for people that soft-brick or need to revert (including myself).
2. Recompile TWRP for the M3 to confirm greatslon's work, and better understand the process.
3. Release a stock rom that's pre-rooted and cleaned up (not that there was a lot of bloat on my device).
4. Release a custom rom that's not MIUI (perhaps based of CyanogenMod).
Since I have virtually no experience, I am sure these goals are quite lofty and will take some time. But hey, you got to have a plan, and I don't have anything else to work on right now.
Let me know if you want to work on anything together, or if you need any help with anything development related.
- 0D0A
Hey hey 0D0A,
I totally agree with you regarding the backups, I think once the first OTA update is pushed for the EU and US devices we have a good and safe way to go back.
Especially the US owners are struggling with greatslons TWRP version, that's the first thing we should tackle after the backup topic is cleared
I will contact you regarding possible work
Best regards,
Benjamin
can flash twrp via fastboot but get error saying and no recovery
hi, first thanks greatslon for doing the work on m3.
i seem to have succeeded in getting stuck and can't get it to boot into your custom twrp. adb on linux was working fine, but no longer. ditto for fastboot just get "waiting for devices" now. i switched to win10 and installed the hisuite app so i can use fastboot but still no adb. so i have tried to flash recovery and recovery2 but when i try to boot recovery i get error "Func NO: 11 (recovery image) ERROR NO: 2 (load failed)."
i then downloaded your custom rom and tried to flash the boot for that still no luck. i can't use adb so i am not sure how to just flash the custom rom with fastboot without being able to get into any recovery.
i did have this all rooted and working with your twrp but kept having issues with dpi and there was an ota update (b003) which wouldn't apply. so i tried to restore backup and it wen't south from there. basically now can't do much other than see the unlock "can't be trusted" page and bootloader.
any suggestions?
Desperately need stock recovery img, not sure exactly what when wrong, but it is stuck in a horrible boot loop. Tried Benjamin's recovery files and they seem to remove twrp and put it somewhat back to normal, but can only access the emui recovery and that fails to load the files. Put twrp back and tried greatslon's ROMs, they load but goes back to boot loop. Wipe and format everything, install my original backup through twrp recovery, it says it works, but again, back to boot loop... at this point I think I'm dead... any ideas, any word on the official recovery img? anything? Help!!
What device do you have? And what version were you on?
sselpeelsxx said:
What device do you have? And what version were you on?
Click to expand...
Click to collapse
I have the M3, BTV-W09, not sure what version, MM6.0 EMUI 4.1
Anyone have any other ideas on horrendous boot loop?
sselpeelsxx said:
Hey hey 0D0A,
I totally agree with you regarding the backups, I think once the first OTA update is pushed for the EU and US devices we have a good and safe way to go back.
Especially the US owners are struggling with greatslons TWRP version, that's the first thing we should tackle after the backup topic is cleared
I will contact you regarding possible work
Best regards,
Benjamin
Click to expand...
Click to collapse
Hello, I am unlocked, TWRPed, and rooted, but am trying to reverse all of that. My build number is BTV-W09C128B002. Is it safe to download the stock recovery from the OP for my device? Or do I really need the C128 version?
Hello and sorry for the late response, you would need the matching version for your C128 device.
I may be able to extract recovery from an update, I have to look into this tomorrow.
Regards
sselpeelsxx said:
Hello and sorry for the late response, you would need the matching version for your C128 device.
I may be able to extract recovery from an update, I have to look into this tomorrow.
Regards
Click to expand...
Click to collapse
Thanks! I have been able to use the Huawei Extractor to extract a recovery.img from OTA updates, but have been afraid to try flashing it. It has been recommended to hold off on trying that since that recovery.img is from an OTA and not a FULL update. Any thoughts?
Hi, i just got the moto g5 plus, i always have phones that from the moment i bought them they wouldn recive any updates, so i realy didnt care if unlocking the bootloader installing new recoverys will affect the OTA updates. So i have a couple of questions.
1- first i want to at least have a stock firmware just in case, but i cant figure out which one should i download from here
firmware.center/firmware/Motorola/Moto%20G5%20Plus/Stock/
Before i always use sammobile.com and it was really easy to found a stock firmware from Argentina. My compilation number is: npns25.137-15-11 this means that i suppose to download that one XT1681-XT1683_POTTER_BRASIL_LATAM_MEXICO_7.0_NPN25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip ?
2- it is possible to unlock the bootloader and root your phone without installing a new recovery? i was reading some post and when you change your recovery or you modify something the OTA update will stop working. they are some methods like the magisk but they seem i little bit too complex for me and i don't want to do it every time that a new update is available.
thanks for the help, and sorry for my English i am from Argentina.
1. yes, but any build will flash and run, so it doesn't really matter that much...
2. Nope. You need to flash TWRP in order to root. This is because the stock recovery will only flash signed images... You can use Magisk, after backing up a stock build. Anytime there is an OTA, just restore to that system image, Flash the original recovery via fastboot, and then take the OTA. Once you have it, flash TWRP again, and restore to your other build. Or just run a custom room like Lineage or RR, and this whole thing isn't really an issue anymore.
Karlinski said:
1. yes, but any build will flash and run, so it doesn't really matter that much...
2. Nope. You need to flash TWRP in order to root. This is because the stock recovery will only flash signed images... You can use Magisk, after backing up a stock build. Anytime there is an OTA, just restore to that system image, Flash the original recovery via fastboot, and then take the OTA. Once you have it, flash TWRP again, and restore to your other build. Or just run a custom room like Lineage or RR, and this whole thing isn't really an issue anymore.
Click to expand...
Click to collapse
yeah i know i had a samsung galaxy s3 until now, and i always have cyanogen, slimrom or now lineage, but this is the first device that i have one that will get updates (at least 1 more :S) and i want to seize that
i will start downloading that file just in case
1- ok so unlocking the bootloader doesn't affect updates only when you modify files? when the update is installing is basically comparing the files that you have with the ones that you suppose to have and if there is something different it will fail? its something like that?
2-dumb question how do you do a full backup in the stock recovery there is no option no do a nandroid backup or it will appear after i just unlock the bootloader?
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were “_Flash_lock.bat”, “_Flash_.bat”, “_Flash_erase_userdata_lock.bat” and “_Flash_erase_userdata_lock.bat” files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
what about deleting those underscores before each word, i think they shouldn't be there.
kuartito said:
what about deleting those underscores before each word, i think they shouldn't be there.
Click to expand...
Click to collapse
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
finxminx said:
I tried but no success. Maybe I'm doing wrong to use mi flash tool. Maybe I should just try to use bat files through fastboot, I don't know. I haven't found any information on the forum or google if I can do it like that.
Click to expand...
Click to collapse
i'm by no means an expert and my advice has no value at all, but i don't see why you wouldn't give flashing from fastboot a try.
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
What directory did you select in miflash?
JakobSWE said:
1: Those firmware are not meant for miflash, flash using twrp
2: Don't use the script that locks if you wanna avoid trouble.
Click to expand...
Click to collapse
I downloaded 3 copies of 10.0.3.0 firmware from different places and each one claimed those firmwares were for fastboot, not twrp. I attached the folder's screenshot.
henk_j said:
What directory did you select in miflash?
Click to expand...
Click to collapse
I attached the screenshot of the directory.
finxminx said:
Hi,
Two weeks ago I unlocked and rooted my mi a1 (which was running android pie v10.0.3.0.) with magisk. When I saw the January update was released, I wanted to unroot the phone and I uninstalled magisk. However, the phone rebooted and there was only “no command” screen.
Now I wanted to flash the stock rom to save my phone by flashing the stock rom again, but as you may know, Xiaomi hasn’t released the official android pie firmware on its website. And I can’t go back to Oreo firmware due to anti rollback protection.
I found several v10.0.3.0 firmwares on the internet and downloaded them. However this time I’m having trouble while flashing the stock rom via Mi Flash Tool. When I wanted to flash the firmware, Mi Flash Tools gave error “can not found file flash_all_lock.bat” or any other bats. When I checked the firmware files, there were _Flash_lock.bat, _Flash_.bat, _Flash_erase_userdata_lock.bat and _Flash_erase_userdata_lock.bat files.
Any ideas how I can sort this problem out? Any immediate assistance will be much appreciated.
Thanks
Click to expand...
Click to collapse
flash this official pie rom
http://bigota.d.miui.com/V10.0.4.0....0.PDHMIXM_20190104.0000.00_9.0_2cee840c96.tgz
...
Stuck in Loading Screen after Update Magisk
I have the same problem here,, This morning i got nontification from Magisk to update to the new version,, and update done, Magisk start reboot,,, when reboot,, i always stuck on Loading Screen. I check from TWRP my Internal Storage cannot detect by Pc,, So i think i cannot doing Flashing by TWRP,, I'm wipe out all data to clear this mess,, so i start to do a flashing with MIFlash, i'm download the custom rom and start flashing.. and i got this message "cannot found file flash_all_lock.bat"
Sorry for my Bad english.. cus i'm still young
Hey guys!
I recently read many Questions About downgrading the Galaxy S8 to 7.0/8.0 after we got the 5x Bootloader.
Well many of you say NO but What many of you forgot is that there is a way to Downgrade your phone.
I already had that Problem with my S6 back in 2016, where I wanted to Downgrade it to 5.1. All you Need for a Downgrade is a Combination File.
Combination files are basically used for testing purposes in the Samsung devices. These files are there to make sure that the functionality of your device is error-free, before making its final release. These files are created by Samsung company and are found in only their devices.
Combination ROM Advantages:
Its help you to repair imie number in some models like S8/S8 plus S7/S7 Edge S6/S6 Edge…
Its very useful in bypass samsung account in too many models.
Its very useful in bypass Google account in too many models.
Its very useful for downgrade in some models.
Its help you to enable usb debugging.
its help to remove any security FRP / Reactivation Lock from Samsung like 2016-2019
You can find Combination Files for Galaxy S8 devices here:
G950U with latest Bootloader: http://www.mediafire.com/file/j8xi2n73zhh37q1/COMBINATION_FA70_G950USQU5ARG4.zip
G950F (currently only for 4x Bootloader): http://www.mediafire.com/file/c37zq...QB19841686_REV00_user_mid_noship.tar.rar/file
Here is a Video of Downgrading a Galaxy S6 Edge with Combination File : https://www.youtube.com/watch?v=dOKJcHU1pXM Should work with S8 too
Hello, nice tutorial!
Want to ask:
"Combination files are basically used for testing purposes in the Samsung devices. These files are there to make sure that the functionality of your device is error-free, before making its final release. These files are created by Samsung company and are found in only their devices. "
So only Samsung releases these files to public? or are leaked?
I`m asking to check if I should wait or not, I had V4 bootloader but recently by accident with the latest update I got V5
rilley said:
Hello, nice tutorial!
Want to ask:
"Combination files are basically used for testing purposes in the Samsung devices. These files are there to make sure that the functionality of your device is error-free, before making its final release. These files are created by Samsung company and are found in only their devices. "
So only Samsung releases these files to public? or are leaked?
I`m asking to check if I should wait or not, I had V4 bootloader but recently by accident with the latest update I got V5
Click to expand...
Click to collapse
I would recommend you to wait till the latest Combination File gets public for the G950F/G955F. They do work very good and are also stable. Usually I think Samsung does not public These files online but they get leaked very often. I used the Combination File to Downgrade my S6 from 7.0 with Bootloader 6 to 5.1.1 with Bootloader 2.
Im sorry but I can only explain the function of a Combination Rom along with the Galaxy S6..
Once Cthe latest Combination File is available, do this:
1. Download your Nougat/Oreo Firmware you want to install
2. Download Combination File with the latest Bootloader Version
3. Downlad 7zip, since you Need to edit the firmware you want to install
3b) Extract the firmware you want to install to a new Folder
3c) Delete all files except for boot.img, cache.img, recovery.img and system.img
3d) Open 7zip from your Start Menu and locate the firmware Folder
3e) Mark the remaining files and press the green "Add" Button at the upper left corner and create a tar (Odin Flashable) file
4)Download Odin
5) First uncheck Auto-Reboot
6) Now first Flash the Combination File
7) Afterwards go directly again in Download Mode and Flash the tar- firmware File
8) Reboot your phone and do a wipe
9) Congrats! You now have Stock 7.0/8.0 Back!
Notes: Fingerprintscanner wont work, because it is a part of cm.bin, OTA Updates wont work as well, Dont worry if you see a green text next to the Phone logo while starting it. Thats normal and not an error.
Backup your files before you do that!
I hope it helped you
halloo13 said:
I hope it helped you
Click to expand...
Click to collapse
Yes, many thanks for response!
I guess I will wait until I get the combination of files, but until then I want to switch CSC, found a solution to use THAI sim card, but not sure, if everything goes ok, I guess the new OTA update will be the latest from THAI, there are no changes to get bricked by this method right? ( I will be able to get back to the ROM stock that I have now? )
halloo13 said:
I would recommend you to wait till the latest Combination File gets public for the G950F/G955F. They do work very good and are also stable. Usually I think Samsung does not public These files online but they get leaked very often. I used the Combination File to Downgrade my S6 from 7.0 with Bootloader 6 to 5.1.1 with Bootloader 2.
Im sorry but I can only explain the function of a Combination Rom along with the Galaxy S6..
Once Cthe latest Combination File is available, do this:
1. Download your Nougat/Oreo Firmware you want to install
2. Download Combination File with the latest Bootloader Version
3. Downlad 7zip, since you Need to edit the firmware you want to install
3b) Extract the firmware you want to install to a new Folder
3c) Delete all files except for boot.img, cache.img, recovery.img and system.img
3d) Open 7zip from your Start Menu and locate the firmware Folder
3e) Mark the remaining files and press the green "Add" Button at the upper left corner and create a tar (Odin Flashable) file
4)Download Odin
5) First uncheck Auto-Reboot
6) Now first Flash the Combination File
7) Afterwards go directly again in Download Mode and Flash the tar- firmware File
8) Reboot your phone and do a wipe
9) Congrats! You now have Stock 7.0/8.0 Back!
Notes: Fingerprintscanner wont work, because it is a part of cm.bin, OTA Updates wont work as well, Dont worry if you see a green text next to the Phone logo while starting it. Thats normal and not an error.
Backup your files before you do that!
Click to expand...
Click to collapse
Hi, ok but it means that i cannot use fingerprint or ota update anymore or after dowgrade could i install full stock firmware with odin and recovery functionalities?
Will this trip Knox?
Any idea if I can downgrade from pie on a S8+ on bootloader 6?
I've tried this method on my S7 edge but I've stucked on step - deleting files.
After extracting the firmware I get 5 files- Ap, Bl ect.
When i extract the AP file (previously deleting "md5" from the name, and becoming rar file) there are only 3 new files (nothing for delete if i remembering correctly)
Files i need to delete are on other files from extracted firmware.
At the end I finished on unsuccessful flash.
I want to go back to nougat on my S8+ (955f), but i dont want to take risks, so I did flashing on old device with corect firmware.
I'm really mad at Samsung. Battery life become horrible at pie. Thats why I want to go back to nougat or at least oreo.
I will post some videos after day or two how is possible to downgrade android version on some Samsung devices with higher bootloader version. These methods didn't worked for me but may be they will encourage some of you to make possible the downgrade.
As I promised:
1. Interesting way to downgrade Samsung Device (J series) when touchscreen does not working:
https://www.youtube.com/watch?v=SmfgxoUhflA&feature=emb_title
2. Second method:
https://www.youtube.com/watch?v=ZKg1DC4ul_g&feature=emb_title
As I remember oreo and nougat have pro mode on video recording and faster charging speed. I hope someone to explain is it possible to downgrade S8 and whats are the steps with this method.
so if i want to downgrade to firmware with bootloader v4 but my phone has now v6, will i download combination file with bootloader 6 or 4? I didn't get that part, sorry. i have s8+
edit: ok, 4 didn't work, so i guess need to get 6
Does anyone know the password for the linked Combination file?
Thanks for this thread.
I want to downgrade from Oreo to nougat too, I'm on "U1" security patch, but I don't understand the order of bootloader version... Can you try to explained how to ?
I found this if it can help : https://combinationfirmware.com/combination-samsung-galaxy-s8/
Scylla.bx said:
Thanks for this thread.
I want to downgrade from Oreo to nougat too, I'm on "U1" security patch, but I don't understand the order of bootloader version... Can you try to explained how to ?
I found this if it can help : https://combinationfirmware.com/combination-samsung-galaxy-s8/
Click to expand...
Click to collapse
Since you are on bootloader version 1, you don't need the combination files. If you were past version 2 they would be needed.
Once you update to a new bootloader you can't go back to software on the older bootloader without the combination files.
Kaloob said:
Since you are on bootloader version 1, you don't need the combination files. If you were past version 2 they would be needed.
Once you update to a new bootloader you can't go back to software on the older bootloader without the combination files.
Click to expand...
Click to collapse
Thank you for your reply.
Ok so if im on the right bootloader for Nougat, why can i install this rom ?
[S8/S8+][Nougat][01-Jan-2020][v30] LightROM
In fact i can install it, all seem to be fine, no error in twrp, but at reboot it freeze at bootloader
Thanks for your help bro
Scylla.bx said:
Thank you for your reply.
Ok so if im on the right bootloader for Nougat, why can i install this rom ?
[S8/S8+][Nougat][01-Jan-2020][v30] LightROM
In fact i can install it, all seem to be fine, no error in twrp, but at reboot it freeze at bootloader
Thanks for your help bro
Click to expand...
Click to collapse
If you have an Exynos version, maybe ask around on that thread.
If you have a Snapdragon variant, you can't flash that ROM.
Kaloob said:
If you have an Exynos version, maybe ask around on that thread.
If you have a Snapdragon variant, you can't flash that ROM.
Click to expand...
Click to collapse
I have exynos. Anyway thank for your help, i try to post on that thread and hope someone could figure it out.
Peace
Did anyone find the password for the file?
necklickhia said:
Does anyone know the password for the linked Combination file?
Click to expand...
Click to collapse
Password I had to find it elsewhere: "www.samkey.org/forum" without the quotes