Noob Questions: Firmware,Bootloader, root. - Moto G5 Plus Questions & Answers

Hi, i just got the moto g5 plus, i always have phones that from the moment i bought them they wouldn recive any updates, so i realy didnt care if unlocking the bootloader installing new recoverys will affect the OTA updates. So i have a couple of questions.
1- first i want to at least have a stock firmware just in case, but i cant figure out which one should i download from here
firmware.center/firmware/Motorola/Moto%20G5%20Plus/Stock/
Before i always use sammobile.com and it was really easy to found a stock firmware from Argentina. My compilation number is: npns25.137-15-11 this means that i suppose to download that one XT1681-XT1683_POTTER_BRASIL_LATAM_MEXICO_7.0_NPN25.137-15_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip ?
2- it is possible to unlock the bootloader and root your phone without installing a new recovery? i was reading some post and when you change your recovery or you modify something the OTA update will stop working. they are some methods like the magisk but they seem i little bit too complex for me and i don't want to do it every time that a new update is available.
thanks for the help, and sorry for my English i am from Argentina.

1. yes, but any build will flash and run, so it doesn't really matter that much...
2. Nope. You need to flash TWRP in order to root. This is because the stock recovery will only flash signed images... You can use Magisk, after backing up a stock build. Anytime there is an OTA, just restore to that system image, Flash the original recovery via fastboot, and then take the OTA. Once you have it, flash TWRP again, and restore to your other build. Or just run a custom room like Lineage or RR, and this whole thing isn't really an issue anymore.

Karlinski said:
1. yes, but any build will flash and run, so it doesn't really matter that much...
2. Nope. You need to flash TWRP in order to root. This is because the stock recovery will only flash signed images... You can use Magisk, after backing up a stock build. Anytime there is an OTA, just restore to that system image, Flash the original recovery via fastboot, and then take the OTA. Once you have it, flash TWRP again, and restore to your other build. Or just run a custom room like Lineage or RR, and this whole thing isn't really an issue anymore.
Click to expand...
Click to collapse
yeah i know i had a samsung galaxy s3 until now, and i always have cyanogen, slimrom or now lineage, but this is the first device that i have one that will get updates (at least 1 more :S) and i want to seize that
i will start downloading that file just in case
1- ok so unlocking the bootloader doesn't affect updates only when you modify files? when the update is installing is basically comparing the files that you have with the ones that you suppose to have and if there is something different it will fail? its something like that?
2-dumb question how do you do a full backup in the stock recovery there is no option no do a nandroid backup or it will appear after i just unlock the bootloader?

Related

Need help flashing ROM on I545

Hi it is the first time I am flashing Android ROM. I have done some reading already. Before I start, I still have a few questions and also want to make sure I am doing it right.
I own the Galaxy S4 Verizon I545. It is running Samsung ROM Android 4.4.2, Baseband I545VRUFNC5. My goal is to flash a new ROM with recent Android versions, hopefully 7.1.1 (but I would settle with Marshmallow if that is more stable), it can be close to AOSP, I don't need ROMs with extra features.
In my understanding, the bootloader is locked, it will only load signed kernels and recovery. And then the kernel would load the system. In order to flash the system, it is best to flash the recovery first with TWRP. TWRP is modded with loki hack so it would load with the locked bootloader.
So here are my questions:
1. Does it matter which firmware/baseband I am currently on? For some phones (LG G2) I heard newer firmware fixed the loki hack. Should I update to the latest Samsung rom or leave it at NC5?
2. I don't see many ROM posted for the i545, which one is the most recent and reasonable stable? The Cyanogen website is down, should I try LineageOS?
3. I see different instructions for flashing TWRP. Can I flash it with just Odin? Some instruction mentioned rooting the phone first with KingRoot or other root, and then use dd. Does the phone have to be rooted? (I prefer not to if it is not necessary)
4. If after I flashed recovery, it fails to boot into TWRP, what can I do to restore everything to default?
5. The kernel will be untouched in the process right? I am only flashing recovery and system ROM, and the kernel will work fine with the new system ROM?
Here are the step and software I plan to use:
0. reset the phone to factory
1. use Odin to flash TWRP 2.8.7
2. download a ROM compatible with I545 and place it on the phone
3. flash the system using TWRP
Any feedback would be appreciated.
PS: Also I have a LG G2 D801. I would flash that phone instead if it is easier. I just want to get started and learn some things along the way.
https://forum.xda-developers.com/galaxy-s4-verizon
Oh Sorry. Didn't notice there is another forum. Should I repost there?
Yes.
1. Yes, it does matter. As you said, newer firmwares have fixed the exploits which make the phone harder to hack.
2. Any ROM should support your phone. They are generally unified.
3. In the name of anything holy, do not root with KingRoot. If you want to root, then the only way to go is CF-Auto-Root.
Rooting is sometimes necessary because recovery won't always install with Odin.
4. Flash stock ROM.
5. Kernels are specific to ROMs. So no, the kernel won't be untouched.

Need Help Understanding ROMs after I rooted

I had 6p since release. I didn't want to root while still getting OTA updates. I figured Oreo may be last I will get so I rooted with Skipsoft Toolkit and all went well. Now onto Roms. My main question is, can I flash any ROM regardless of the Android version? As I'm on Oreo, can I flash Pure Nexus running 7.1.2, or must I only flash Oreo Roms?
It's more the custom recovery u need than being rooted.
If your bootloader is unlocked and you got TWRP as recovery installed u can flash any custom rom u want to.
If you like to stay up to date with security patches you should flash Oreo roms in the future.
cigator said:
I had 6p since release. I didn't want to root while still getting OTA updates. I figured Oreo may be last I will get so I rooted with Skipsoft Toolkit and all went well. Now onto Roms. My main question is, can I flash any ROM regardless of the Android version? As I'm on Oreo, can I flash Pure Nexus running 7.1.2, or must I only flash Oreo Roms?
Click to expand...
Click to collapse
It's inadvisable to jump to a custom ROM based on a different version of Android. So, if you were on stock Oreo and you wanted to flash a custom Nougat ROM, you'd be better to revert to the factory Nougat images and then flash an N-based ROM. Regardless of what you try though, make sure you have the latest TWRP and have a full backup (also referred to as a Nandroid backup) before you flash any modifications. If you end up borking things then you can simply restore your device to it's last stable state.
When it comes to rooting, recoveries and flashing ROMs, I'd highly recommend you become familiar with, and follow, the guide at https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 as it's very clear to how you do most modifications to your device.
Happy flashing.
ultyrunner said:
It's inadvisable to jump to a custom ROM based on a different version of Android. So, if you were on stock Oreo and you wanted to flash a custom Nougat ROM, you'd be better to revert to the factory Nougat images and then flash an N-based ROM. Regardless of what you try though, make sure you have the latest TWRP and have a full backup (also referred to as a Nandroid backup) before you flash any modifications. If you end up borking things then you can simply restore your device to it's last stable state.
When it comes to rooting, recoveries and flashing ROMs, I'd highly recommend you become familiar with, and follow, the guide at https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 as it's very clear to how you do most modifications to your device.
Happy flashing.
Click to expand...
Click to collapse
Thanks for that link. I thought I knew what I was doing, but I see I already screwed up, because I installed TWRP and rooted. Set phone the way I wanted and made a Nandroid. I never made a Nandroid of my stock Oreo set up. Damn. Hope that doesn't come back to bite me.
cigator said:
Thanks for that link. I thought I knew what I was doing, but I see I already screwed up, because I installed TWRP and rooted. Set phone the way I wanted and made a Nandroid. I never made a Nandroid of my stock Oreo set up. Damn. Hope that doesn't come back to bite me.
Click to expand...
Click to collapse
As long as the setup is working and mostly the way you want it, that's what you want the nandroid for. Most people will just ensure they have a working ROM for a backup before they begin flashing other stuff. I'd also recommend moving a copy to your computer. If you ever do a 'complete' wipe that includes your sd card, your backups will be gone too.
The one thing to be aware of with nandroid backups is, if you have any kind of screen PIN/security, when you restore it, you're temporarily locked out as the PIN doesn't work. If this happens to you, it's not the end of the world, but you have to boot into TWRP, go into your system files and delete the three lockscreen db files, then you'll effectively have an unlocked screen and can reset your PIN, pattern and fingerprint. The easiest thing to do (which I never remember) is to remove lockscreen security before you make the backup.

Help with soft brick

Hi guys,
I got the ASUS Zenfone 3 Zoom and started playing with it. Unfortunately I managed to soft brick it and somehow I can't go back to stock. Here are all the things I did. I would be happy to get any ideas what to try next:
1. unlocked the bootloader - using asus's official unlock tool
2. flashed twrp recovery - twrp-3.2.1-0-Z01H-20180304.img, using:
adb reboot bootloader
fastboot flash recovery twrp.img
3. updated asus's firmware to the latest official one:
copying UL-Z01H-WW-71.60.139.30.zip onto internal memory
android detects the update and applying it using android
4. Enabling lock pattern at boot (from android settings). Correct pattern required even when booting into recovery
5. Installing supersu via twrp:
adb reboot recovery
installing supersu
wiping caches (the cache partition cannot be wiped)
6. SuperSu working (tested via android)
7. Reading about Magisk. Trying to install magisk via twrp. Magisk's installer complained that the system is not vanilla (due to SuperSu modifications). Have to uninstall SuperSu to return to previous state.
8. Tried uninstalling SuperSu from the program itself (in android). The uninstaller got stuck. The phone become unresponsive and had to reboot.
9. Found a script packaged as an executable zip (to be installed via twrp) that will uninstall SuperSu and return system to pristine state (SuperSu makes a backup of the files it changes before installation) - UPDATE-unSU-signed.zip. Uninstallation worked.
10. Magisk installation still complained about the bootloader. Then things started to go wrong. I unpacked the latest firware UL-Z01H-WW-71.60.139.30.zip, took out boot.img and tried to flash just the bootloader
fastboot flash boot boot.img
11. Upon reboot the phone got stuck at the ASUS logo. Reboot into recovery and into fastboot still works (soft brick). Still shows unlock pattern at boot.
12. I tried flashing the original firmware using TWRP (install a zip). However the installation threw some errors. Unsuccessful.
13. I've tried flashing the system.img from the original firware using fastboot but still it's stuck at the ASUS logo at boot.
fastboot flash system system.img
Here I am stuck. I've read that TWRP cannot install properly the ASUS official firmware but if you flash the original recovery, it can probably flash it properly. Another thing that I think might explain why I cannot get out of the soft brick is that I've enabled the lock pattern at boot, which effectively encrypted some parts of the phone and I have a strong feeling this interferes with the boot process. I will look for a script/installable zip (via twrp) that can remove the lock.
I really need ideas/suggestions before I make something that will turn my phone into a hard brick. Thanks.
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Thanks
+)KEV1N(+ said:
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Click to expand...
Click to collapse
Thanks,
I tried to find a stock recovery images but unsuccessful. Can you tell me where to get it from?
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
-- [link] removed due to XDA regulations
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
mollonado said:
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
Click to expand...
Click to collapse
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
It came preloaded with Nougat? Interesting.
+)KEV1N(+ said:
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
It came preloaded with Nougat? Interesting.
Click to expand...
Click to collapse
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
mollonado said:
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
Click to expand...
Click to collapse
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
+)KEV1N(+ said:
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
Click to expand...
Click to collapse
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
mollonado said:
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
Click to expand...
Click to collapse
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
mollonado said:
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
Click to expand...
Click to collapse
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
+)KEV1N(+ said:
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
Click to expand...
Click to collapse
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
mollonado said:
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
Click to expand...
Click to collapse
First off, my apologies for this late reply (Been superbusy with school and internship assignments)
Secondly, and that is why I only use magisk. Because once you mess with the host file, depending on what module you install, it can range from tripping safetynet to bootlooping.
So quick question, is it still in this state right now since 9 days ago?
Greetings,
Kevin
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
I made a mistake and could not install recovery stock, I followed what you wrote in the beginning install MM recovery and so I did a hard reset and I was able to install the most current recovery stock and installed ROM Oreo, Thanks. Sorry, I'm on google translator.

[Q] XT1768 getting September Security Update

Hello all,
Been a LONG while since I've actively played around with rooting and unlocking an android device. I finally "upgraded" from my very aged Galaxy S4 to the Moto E4 XT1768. I have successfully unlocked the bootloader, got TWRP installed, rooted with Magisk, and gotten Xposed installed with my favorite modules.
This morning, I got a prompt that a new security update is available, and like a noob, I tried to take the update. This resulted in me getting stuck in a loop where the phone only wanted to boot into TWRP. I got that fixed thanks to XDA, got the pending and failing update completely cleared and am booted back into the device normally, and have frozen the moto update service.... but now...
Is there a way without completely flashing back to stock rom? I know how to take titanium or nand/twrp backups, but I feel like this would still be hours of work to go back to stock, flash, re-root restore all apps blah blah. what are the chances of there being a dirty-flashable zip put out at this point?
The way I normally do these type of upgrades is to download the firmware (from here), use fastboot commands to wipe (erase) and flash the needed partitions (everything but data and recovery), boot to TWRP - flash the no-verity-opt-encrypt.zip & root, and then reboot to system - done. It's easy enough for me, but I know some prefer to being able to use a flashable zip in TWRP.
Also, I have to ask - did you get your e4 cheap? It's was replaced by the e5, some other phones seem to be getting replaced like the G6 series (it's gone on clearance at some places), so they can be had cheap.
bast525 said:
Hello all,
Been a LONG while since I've actively played around with rooting and unlocking an android device. I finally "upgraded" from my very aged Galaxy S4 to the Moto E4 XT1768. I have successfully unlocked the bootloader, got TWRP installed, rooted with Magisk, and gotten Xposed installed with my favorite modules.
This morning, I got a prompt that a new security update is available, and like a noob, I tried to take the update. This resulted in me getting stuck in a loop where the phone only wanted to boot into TWRP. I got that fixed thanks to XDA, got the pending and failing update completely cleared and am booted back into the device normally, and have frozen the moto update service.... but now...
Is there a way without completely flashing back to stock rom? I know how to take titanium or nand/twrp backups, but I feel like this would still be hours of work to go back to stock, flash, re-root restore all apps blah blah. what are the chances of there being a dirty-flashable zip put out at this point?
Click to expand...
Click to collapse
Flashing back to stock and taking the updates is really the best way. Unless you can find a complete firmware package of the new update which of course takes back to stock as well. Really the only way to do it. @MotoJunkie01 makes some TWRP flashable stock roms. And he also creates the partition updater which updates your oem partition and other important things that can't be done in the Twrp flashable stock ROM.
madbat99 said:
Flashing back to stock and taking me updates is really the best way. Unless you can find a complete firmware package of the new update which of course takes back to stock as well. Really the only way to do it. @MotoJunkie01 makes some TWRP flashable stock roms. And he also creates the partition updater which updates your oem partition and other important things that can't be done in the Twrp flashable stock ROM.
Click to expand...
Click to collapse
Speaking of that, @ALI12 just posted a stock firmware package for the NCQS26.69-64-10 build. He gave me approval to use it to update my firmware thread to the latest build, so I'll be updating that OP shortly.
MotoJunkie01 said:
Speaking of that, @ALI12 just posted a stock firmware package for the NCQS26.69-64-10 build. He gave me approval to use it to update my firmware thread to the latest build, so I'll be updating that OP shortly.
Click to expand...
Click to collapse
This will be for the XT1766, correct? Or will same build work for XT1768 (me thinks not)?
So what would the easiest/quickest way be to get updated with all of my apps and data intact? Twrp backup of data partition? Or would there be any way to do this without wiping data at all?
bast525 said:
So what would the easiest/quickest way be to get updated with all of my apps and data intact? Twrp backup of data partition? Or would there be any way to do this without wiping data at all?
Click to expand...
Click to collapse
If you're going to slash a firmware package you'll want to wipe everything. Especially data. Make a backup of your data first of course. After you flash TWR P you can try restoring your data and see if everything comes back. but everything in your downloads folder and all of that will be gone once you format data to remove encryption again.

[HELP] How to go back to stock —using PE and Magisk

Let me start by saying that I know there are multiple posts and comments around surrounding this topic, but I almost damaged my phone once since not all the instructions apply to everyone's situation. So I am hoping someone can help me with the details I am giving of my phone, which I want to give to my mom now and she doesn't need any fancy customizations.
I am using the Pie Pixel Experience ROM with the December security patch and also rooted with Magisk. What I need to do is be able to unroot the phone and install to it the latest available official build for the device and lock the bootloader. Also I remember when I did all the process of installing this ROM that it has two partitions (in case this affects in anything the process of going back to stock).
So if anyone could help me out with a step by step explanation (and resources) I would be truly thankful.
Flash stock pie by miflash, you find it on xda, be careful to take fastboot image pie!
Just get twrp flashable stock rom and flash it..... This will flash stock rom and as well as stock recovery on your phone... Plus you will aslo recive stock ota updates

Categories

Resources