Hi
I try to update from a cyber PC but the update failed and I didn't save the repair code.
I tried to flash from Odin but it tells me that I get a pin to map or setup connection
i think everyone here can't help you because if you not remember your PIN Code, Odin can't help you but if you have newer version Odin, you can try older version to try Reset your phone
Related
hi xda guys this is my story
i have an at&t samsung s4 on android 4.2 i have tried to update it via wifi to 4.4
but no use. a message appear say's " your device is up to date "
i have tied "loki way" it failed
i have tried "odin tool way' it failed it won't complete the proses
i have tried samsung kais it fail's too a message says no update for this device
***** i managed to root the device
and then i found the safestrap apk i have insert the TWRP recovery
i have made a backup in case something go's wrong
and i have tries to flash a clean google s4 4.4.4 rom
**** and then the the phone stuck of samsung logo and vibrate often .the TWRP is lost
**** i have tried to recover the the via samsung kias it made it wors
now it have message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
i have tried via odin using the official firmware that i have downloaded. but did not work olso
i have tried the kais recovery mode but i did not get the recovery code
help my friend what should i do
nead you help desperately
any help
any help any one
:fingers-crossed:
You need to go to the at&t section on xda. This section is not for your phone.
Because you don't give any details about the Odin error, I can't help you further.
Most Odin errors can be solved by:
- Other cable
- Other usb port
- Other pc.
my phone Samsung galaxy core 2 sm-g355h started updating! when getting in 95% of updating have stopped with the message error! so from now and then my phone restarts and try again to reinstall the update with the same result!! can't insert in recovery mode because it's starts again the upadating!! so my phone is dead and cannot do anything! even with odin i have tried to install a stock rom and cannot do it! it say's tha cannot open com port! althought odin see's the phone!! i have been dissapointed!! the only sollution that remain's to me is to pay a visit in samsung's dealer!! Do you have any idea?
:crying:
I had the same problem with this device... I had to flash stock rom with odin.
Just install kies and open it. Then reinstall usb driver through kies and then try flashing stock rom with odin, it will surely work. So good luck with that.
updating via ota isnt much good follow kies or stores
did you fix it? if yes how? I have the same problem
The best thing about samsung is Samsung Kies. There is a emergency firmware recover or something of that kind, I dont remember the name. Just install it and connect your device to it. It will try to recover your phone
go to a mobile center
I was trying to upate the SUBinary and it told me to reboot. As soon as I did I get a message saying "Custom Binary Blocked by FRP" and a red text saying "Secure Fail : Kernal" help me.
It has something to do with your Google account being logged into the phone.. samsung can send signal to reset it but they won't if it's been rooted etc still trying to make sure reflash omg the phone with original rom would make it worse or not. Or maybe just reflash in the kernal. I'm on t mobile but can only find original rom on t mobile same network but we will see. I'm on my fiance a accident messaging from her phone lol or maybe just reflash the kernal the whole problem for me is I don't have a computer to try to reflash from what someone told me I may try to reflash with odin 3.90 with a tar file to the exact model number
Solution
I had the exact same problem as you but i found a fix
i know this is a very late response but who knows maybe some people will run into it
First of all you will need
-odin3
-samsung usb drivers
-g530w tar md5 file find yours here (im telus variant but bell worked for me)
https://1fichier.com/dir/OgrN3QNx
or
https://www.youtube.com/watch?v=N33i15UVCyA
g530w Pit file here
https://drive.google.com/file/d/0BzyeAt2hy6Xea0VPUDBLOWY5WU0/view
or
http://www.sammobile.com/forum/showthread.php?t=30863
and use odin to flash your phone while its in download mode connected to your computer
skip to 1:28
https://www.youtube.com/watch?v=6lki9ei2-WM
sorry for super messy post i rarely post things i hope this saves you time
This is the best and quick fix for FRP Lock
...Just follow the link: https://forum.xda-developers.com/grand-prime/help/custom-binary-blocked-frp-t3266961/page3
Worked for my SM-G530W
I had the same problem, and i used Kies3 (not compatible with my phone anyway), but if you go on toolbar to "TOOLS", "Firmware Upgrade and initialisation", it asks you for your device model (for mine i typed SM-G530W, and then it asks you for device serial number (S/N) found under the battery by the IMEI number. After this, follow on screen prompts (Restart your device in Download mode/ PDA, connect USB cable, etc), and let the software download and install (factory rom); After your device restarts, you are good to go (sometimes if it gets stuck on booting, remove battery for few second and start again.) Now you have to go back and set up everything you want, including re-rooting your device... Good luck. (My device is Galaxy Grand Prime SM-G530W Factory unlocked rom, Android 5.11.
Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
SoDeadly said:
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
Click to expand...
Click to collapse
I can't enter the Account Verification because the one who used this phone wont tell me the email and psw for it (he was the partner of my mom, but now they fighted and my mom wanted back her's phone.. but now, for vengeance/spite he wont tell us his data). I knew about Combination was old but where can I find the newer one? I am surfing on internet and can't find the right one I tryed many). My Firmware code is 8.0.0/R16NW/G950FXXU2CRED so I need a Combination Firmware eligibile with that.
I cant access the Device to install Smart Switch etc.
You don't need to access to the device. Just download the Samsung utility on your computer and connect your phone thought the download mode.
The name of the Samsung thing is Samsung Kies or something like that. Search for it.
And actually I never saw a phone asking for account verification ... I can't really help if this method don't work.
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
Or, flash twrp. Obviously the warranty will trip. And then delete everything, also the system. Then install back the firmware through Odin
Naruke said:
Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Click to expand...
Click to collapse
The combination firmware needs to match the current firmware of the phone. Example if you have CRC7 then you need combination firmware CRC7
Please help, can't find combination file for sm-g9500 for latest upgrades. Firmware G9500ZHU2CRE1
hi, my s7 edge is on the emergency recovery screen after boot, already tried Smart Switch no success..
already tried install a lot of twrp versions by odin, no success either
tried to install some roms for my phone and got some error, the latest error was saying device 5 and binary 1 or 4 sometimes, i guess this is because my phone was at 8.0 and some rom i got is older right?
So, how can i find a rom with binary 5?
My model is SM-G935FD
This binary error says your bootloader has been updated. The only way to solve this is by installing the latest version of stock rom via odin.
Hello all,
I did something similar i add last update with odin but after restart i get error can't update software. I stupidly turn it off and now is in brick mode I mean nothing happent when i press all possible combination. I order JIG but unfortinaetly did work for S7 it works for my other samsungs. I probably will make my own JIG with 400Kom .
I just thinking any other hardware way to start it.
When i connect to PC i hear the sound connect but after couple seconds disconnect.
Any suggestion what else I can try