How to unbrick? - Samsung Galaxy S7 Edge Questions and Answers

hi, my s7 edge is on the emergency recovery screen after boot, already tried Smart Switch no success..
already tried install a lot of twrp versions by odin, no success either
tried to install some roms for my phone and got some error, the latest error was saying device 5 and binary 1 or 4 sometimes, i guess this is because my phone was at 8.0 and some rom i got is older right?
So, how can i find a rom with binary 5?
My model is SM-G935FD

This binary error says your bootloader has been updated. The only way to solve this is by installing the latest version of stock rom via odin.

Hello all,
I did something similar i add last update with odin but after restart i get error can't update software. I stupidly turn it off and now is in brick mode I mean nothing happent when i press all possible combination. I order JIG but unfortinaetly did work for S7 it works for my other samsungs. I probably will make my own JIG with 400Kom .
I just thinking any other hardware way to start it.
When i connect to PC i hear the sound connect but after couple seconds disconnect.
Any suggestion what else I can try

Related

I think i bricked my new Samsung S7 edge help please ;_;

So i was rooting my phone with TMWP then my phone was encrypted so i used Odin with an original AP of my samsung device
in the progress of doing that i canceled the progress.
so now i keep getting An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch Pc software. so i did that but now i am at this step, telling me to put the phone in recovery mode but when i try to do that it keeps giving me the same error (An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch Pc software.)
Im freaking out right now if you guys could help PLEASE.
Intervasion58 said:
So i was rooting my phone with TMWP then my phone was encrypted so i used Odin with an original AP of my samsung device
in the progress of doing that i canceled the progress.
so now i keep getting An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch Pc software. so i did that but now i am at this step, telling me to put the phone in recovery mode but when i try to do that it keeps giving me the same error (An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch Pc software.)
Im freaking out right now if you guys could help PLEASE.
Click to expand...
Click to collapse
Probably the phone is not detected?
Sent from my SM-G925F
How are you getting to recovery mode?
Should be Vol Down + Home + Power all at the same time
Are you able to power off your device?
If not, press and hold Power + Vol Down until it vibrates or you see it turn completely off, then hold Home (while still holding Power and Vol Down).
Give that a shot to get to recovery.
I had this problem when i tried messing around with TMWP. I dont belive there is one for the S7 egde US models to my knowledge or at least not for att currently due to the us and international models having a different processors International having a Exynos 8890 and US models having a Snapdragon 820. Im pretty sure because of those having different processors TMWP needs to have a build for both processors to my knowledge fix me if im wrong.
Heres what i posted on another thread about trying to flash your phone back to stock and it not working.
Post:
So I would suggest going to this post here and downloading the ODIN 3.12
http://forum.xda-developers.com/showthread.php?t=2711451
I was trying to unroot for a clean root and this one worked for me the one made by PrinceComsy did not work for the flashing the stock ROM but it did work for flashing the ENG Boot ROM. I used 3 out of the 4 file to flash the stock rom I didn't select the BL file at all but you can if you want.
If this help you or you need further/help assistance please feel free to reply to this post
Intervasion58 said:
So i was rooting my phone with TMWP then my phone was encrypted so i used Odin with an original AP of my samsung device
in the progress of doing that i canceled the progress.
so now i keep getting An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch Pc software. so i did that but now i am at this step, telling me to put the phone in recovery mode but when i try to do that it keeps giving me the same error (An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch Pc software.)
Im freaking out right now if you guys could help PLEASE.
Click to expand...
Click to collapse
I had the same problem. It is a screen that says something along the lines of 'Update failed' or 'an error occurred during update'. It turned out for me that that actually was recovery mode just with the error screen. Plugging it into Kies on that screen allowed the emergency firmware to work and fix my phone.
BCSC said:
I had the same problem. It is a screen that says something along the lines of 'Update failed' or 'an error occurred during update'. It turned out for me that that actually was recovery mode just with the error screen. Plugging it into Kies on that screen allowed the emergency firmware to work and fix my phone.
Click to expand...
Click to collapse
Thats great to hear. If you need help doing anything else please feel free to pm me.
My samsung SM-G935FD has the same problem and I tried with Smart Switch and Kies but they say my device is not supported can anyone help???

Stuck on Samsung Logo Odin and Wipe done

Hi, I recently became a Galaxy S6 Edge+ as a gift, which is stuck on the Samsung Logo (blinking). I am not new to flashing Firmware and Roms (came from the HTC HD2 and Dell Streak 5), but everything I do, I can not come through this. Now I need your help, since it's my first Samsung device. Maybe I have something forgotten?
My device:
SM-G928F with Regional Code AUT (free Switzerland firmware) --> Also Samsung Smart Switch shows me this AUT Version (but it wont recognize it, shows it after typing in the serial)
What have I done:
Samsung Smart Switch does not recognize it.
The last 24 hours I have downloaded the firmware through SamFirm 4 times, I have flashed the phone via Odin about 8 times, after the flashs I have wiped the cache and resettet data (full wipe) through the recovery. One time, the phone came to the android optimatization, but it was stuck on the last app (was 30 minutes on this), after reboot it was stuck on the Samsung logo.
Now I need your help. What can I do further? Do I missed something? Any ideas?
Something strange I noticed: When the phone is off and I plug it in to the wall, the battery drains. I have to put the phone to Download-Mode to charge it. Is it linked to the firmware problem? The charger is original Samsung.
So, I flashed TWRP, the Note7 Deodexed Rom and SkyHigh kernel, but it's the same... any sugestions?
I read about a pit file, what is that? May be this the solution?
What I did the last 3 houers was to test Smart Switch With the mac version, the rescue function did not work, the hole program crashed each time. On the windows version it suceed, but my phone is showing just the blinking Samsung logo. Every now and then it vibrates, but nothing happens, so I am at the start of the problem again. Any ideas?
Next update: I flashed the original firmware with a pit file 3 minutes ago. I learned a lot, learnt that the pit files are the partition-files. Now I'm hoping, that with the new partitions it will boot properly :good: . Stay tuned!
Still the same issue. Please help me
Whenever I start the Recovery, it says "installing system update" and then there is a dead Android, does this matter?
A 4 part firmware with pit file did not help. I downloaded another Firmware from another source, also the same. Now I will do a downgrade and look, if this helps. Pleeeeease, help me!
Infos from the download mode:
Produkt Name: SM-G928F
CA_Type: CA_3
Current Binary: Samsung Official
System status: Custom
Secure Download: Enabled
Know warrenty void: 1 (0x0203)
RP SWREV: B:3 K:0 S:1
Maybe the TWRP Log helps: There are errors in writing, is there something missing? It is the original firmware, with the newest TWRP and SuperSU installed. Still stuck on Samsung (animated) logo.
Listen do you have windows on ur mac i use parallels
but do you have windows anyhoe
Sent from my SM-N920G using Tapatalk
Same here
Hello,
I'm quite new here, but not with flashing.
My son got an S6 Edge plus too, with almost the same problem.
I tried also almost anything, the last few days.
ADB sideload, Odin several versions.
It started out with FRP lock.
After I tried al I could find I think it bricked.
And now it is in the state as described above.
Only first screen and draining the battery if not in download mode.
And when I put it on USB cable it says: "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
But Smart Switch doesn't recognise the phone!
I can however get the phone in download mode by pushing vol. down, power and home and then vol up.
But in Odin only works: Pit, CP and CSC.
With AP and BL I get errors and fails.
Please help?
For me AP and BL works with Odin. I am a step furhter now. First I flashed with the option: Erase All Nand. Then I installed TWRP and a made a repair for the System and the Caches partitions. With SuperSU installed, and the caches wiped (manual, dalvik and normal caches), it says "Android is starting, Optimizing Apps" and then "Androis is starting, Starting Apps" on a blue screen and when it loads to the end, it is stuck there.
.You get only the first Samsung S6 Edge+ Screen? Then the system files are missing, there is no OS to start (flashed with AP in Odin). Your flash problem sound quite strange. Did you test another cable?
If you want to do it with Smart Switch, the phone should be in download mode. I also had to try it several times. Did you installed the drivers?
@ KatariaMax: I have Windows and Mac PCs, no Parallels. Does it work with Parallels?
So, one problem less. With the Audax rom and kernel, the phone charges normally (but not with Quickcharge), so I don't have to put the phone to download mode. But here is the same problem, after "starting apps" it is stuck. I will do a log from the install, maybe this helps.
@ HugoGroot: Maybe the second post could be the solution for you: http://forum.xda-developers.com/galaxy-s6/help/s6-bricked-t3497687
I read about Sony devices, which are in a bootloop because of the battery. Could this be possible also for Samsung devices? I have bought a battery, just to be sure. Any other suggestions?
I found the problem here: https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Continuous-Restart-and-Optimizing-Apps/td-p/1020656

Samsung galaxy core prime stuck in boot screen,unable to install software using kies

My phone went down one day when I switched off the alarm by pressing the power button.
and from then on when switching on, it stays on the boot screen
Unable to enter recovery mod and unable to install software via Kies
Phone not yet rooted,approximately 1-year use, lollipop 5.0.2 , Model : SM G360FY/DS
Any have any idea what might have happened and any solution?
trickster10 said:
My phone went down one day when I switched off the alarm by pressing the power button.
and from then on when switching on, it stays on the boot screen
Unable to enter recovery mod and unable to install software via Kies
Phone not yet rooted,approximately 1-year use, lollipop 5.0.2 , Model : SM G360FY/DS
Any have any idea what might have happened and any solution?
Click to expand...
Click to collapse
I don't have your model of phone, I've got SM-S820L. Have you tried booting into ODIN mode?
If you haven't tried that, I would do so and try using ODIN to flash a firmware update. You will need Samsung Drivers, a new release of ODIN3, and Kies or Kies3.
There are some good guides on this site that can push you along your way to full recovery of your phone.:good:
Psilocelium said:
I don't have your model of phone, I've got SM-S820L. Have you tried booting into ODIN mode?
If you haven't tried that, I would do so and try using ODIN to flash a firmware update. You will need Samsung Drivers, a new release of ODIN3, and Kies or Kies3.
There are some good guides on this site that can push you along your way to full recovery of your phone.:good:
Click to expand...
Click to collapse
TRIED BUT STILL NO LUCK:crying
People at service center said to change the board of the phone and it costs around 70$.
IS THEIR NO OTHER WAY?
NO CHANCE OF GETTING A NEW PHONE
I'm sending you a PM right now my friend!

Galaxy s6 edge plus error

so i got my hands on a s6 edge plus live demo unit. so i decided to root it but that failed, then i installed a custom rom and it worked. so i tried to install xposed so i booted my phone into recovery mode but i had an error message that said about the frp lock, but now when i boot my phone it keeps booting to recovery mods and i can't boot it normally. so i searched the internet and found nothing, so i tried myself but i got my phone in an akward situation now... when i boot it up i immedtiatly get a screen saying "an error has occurred while updating the device software. use the emergency recovery function in the smart switch pc software". i tried that but it said my device wasn't compatible and even with Kies and Kies 3 i had the same message. and when flash anything with odin even the stock files it says it failed and my phone says that frp lock thingy again... so can anyone help me please because i really want that phone to keep...

ByPass FRP Samsung Galaxy S8 need help

Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
SoDeadly said:
Did you tried to boot in download mode and then use smart switch ? Smart switch can recognize a phone when you boot at recovery. Then try to repair.
Concerning the combination this error mean that the combination file are too old. I had the same issue long time ago ( Device 2 Binary 1).
What mean the Google Gmail thing ? At boot they ask you the mail ? Why don't enter it then ?
Tell me if something worked. Try to find a newer "combination".
Click to expand...
Click to collapse
I can't enter the Account Verification because the one who used this phone wont tell me the email and psw for it (he was the partner of my mom, but now they fighted and my mom wanted back her's phone.. but now, for vengeance/spite he wont tell us his data). I knew about Combination was old but where can I find the newer one? I am surfing on internet and can't find the right one I tryed many). My Firmware code is 8.0.0/R16NW/G950FXXU2CRED so I need a Combination Firmware eligibile with that.
I cant access the Device to install Smart Switch etc.
You don't need to access to the device. Just download the Samsung utility on your computer and connect your phone thought the download mode.
The name of the Samsung thing is Samsung Kies or something like that. Search for it.
And actually I never saw a phone asking for account verification ... I can't really help if this method don't work.
---------- Post added at 02:08 PM ---------- Previous post was at 02:07 PM ----------
Or, flash twrp. Obviously the warranty will trip. And then delete everything, also the system. Then install back the firmware through Odin
Naruke said:
Hello guys. I know there are many topics about this, but I need a help about my Samsung Galaxy S8 (normal one, not Plus or Edge) G950F.
I tryed many method and I saw many videos and guides, but still it doesnt work.
My Galaxy S8 is brand with Tim (Italy) so I dunno if this could create issues or not.
I downloaded Combination Firmware 8.0 but I always have the error "SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 2, BINARY: 1" on Mobile and Fail on Odin... this just can mean that the Combination Firmware isnt the right one.
I downloaded the right 8.0 Tim Original Firmware and tryed with Odin. It pass and everything go well, but still ask me for the old Account Gmail to verify the Account etc even if Odin did good.
I guess that I need to use that Combination first and put USB Debug (as I'm seeing in many videos) but I can't put this Combination Firmware for the error I said above.
What can I do? What is the right Combination file for a Galaxy S8 8.0 Tim (Italy)? I can't now naither turn on the device because it says to me in loop "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC Software" in a green screen.
Thanks for any help you can give. I just want use back this mobile.
Click to expand...
Click to collapse
The combination firmware needs to match the current firmware of the phone. Example if you have CRC7 then you need combination firmware CRC7
Please help, can't find combination file for sm-g9500 for latest upgrades. Firmware G9500ZHU2CRE1

Categories

Resources