Hi there,
I have been having issues with internet rolling out at home and I've been wondering if it has to do with a network setup. Basically we have 3 routers in different parts of the house with the same SSID for seamless connection and wifi signal everywhere in the house.
The issue I believe I'm having is that my devices are frequently connecting between each router and my device connection halts momentarily and the wifi icon isn't changing to reflect this.
What I need is some way of knowing which router my phone is connecting to with time stamps and hopefully even a Mac address since they have same SSID. Is this possible to retrieve from Android or is there an app for it? Even if it doesn't give too specific information as long as I can see that there's been a network change would be ideal too.
Thanks in advance.
Related
Hello,
I am having the following issue while using Wi-Fi: in the list of available networks is a type of connection I have not seen before. It seems to be a modification of sorts of my own wi-fi connection, but if the device connects to it, I cannot connect to either websites or to the other PCs on the LAN.
This connection is represented by a different type of icon as you can see on the screenshots. I have not created it, but it may be a remnant from my previous connection - look at the names, one has a space in between, the other hasn't. I created the new one (without the space) after I changed my router to D-Link's DIR-600.
An interesting thing about this connection is that the device does connect to it even when not anywhere within range of the router (say 2-3 km.)
Any ideas?
This the symbol for an Ad-Hoc network (Computer to Computer). You can probably remove that connection and still be o.k.
Thanks!
I tried removing it, but it then creates it again.
Of course, I can always disconnect and connect to the other network.
I have never dealt with Ad-Hoc connections. Isn't this connection supposed to enable access to the other computer then? Like LAN? And why does the device connect to this network when far outside the router's broadcast signal?
A picture is better than 1000 words.
For an application I'm trying to get this configuration working:
Is this possible or not?
WiFi Tethering to a WiFi Router / Network
Yes, IF your wifi router will accept wifi as an input.
If all of the devices need to be on a network OTHER than your cell phone, then yes, you need a router. The router will have to accept wifi as it's source.
If all of the devices can be on the same wifi network as your cell, then you can get a wifi repeater or range extender. Repeaters "extend" the range that wifi will reach. I don't see that as an issue here as should be able to place your cell phone well within range of your other wifi-enabled devices.
I don't immediately see why you can't have all of the devices connect to your phone directly, but I don't know anything about the application you are working on.
What I cannot say is whether this setup could bypass the number of wifi devices your service provider limits you to. I know my hotspot (Verizon) limits you to five concurrent.
I hope I've answered your question and I've helped. BTW - your picture was perfect!
Thank you for your explanation.
This is a very specific setup.
The router is an Airlink NMini and I carry in my pocket. It has to be near my camera for the wifi connection to work. I get a lot of interference from wireless equipment on my photoshoots. The Wifi router is trong enough to overpower the interference (only when used in B-mode). It's hooked up to a 5 volt power pack.
Close to me I have an Android tablet for quick selecting the right images, then the images are copied over to a remote laptop that is used by my colleage to edit the images.
I needed the internet connection for sending the processed images to a ftp server or dropbox, so my clients can download the images.
I tried using the router as a relay/bridge, but couldn't get that to work. Maybe it's possible, but that's higher networking config.
I finally got it to work by connecting the phone to the laptop using usb.
Configured the laptop for ICS connecting the USB-internet connection to the wireless router. Had to set ip adresses manually, becaue the dhcp of the router did not transmit the correct gateway. But as there are only 2 devices attached, that's not a problem after documenting this change.
So I'm good to go for our next photo assigment. Case closed.
Sent from my Transformer TF101
Sweet setup man
I have a weird situation. I have an SMC8014W-G modem/router at my upstairs desktop and D-Link DAP-1360 Range Extender on the main floor. I can connect from wifi being initially turned off to either spot no problem. BUT I cannot move my phone or tablet from one of their locations to another unless I turn off my Tablet`s WiFi for about 5-10 minutes before turning at back on at the new location, or it will not connect. This is a problem with my network, because the same thing happens on my android phone. Still working on it. I`ve seen others across the web talk about this problem with other mobile devices, while saying the problem doesn`t happen on PC type devices like laptops.
To test that out, I turned my phone's hotspot on. Using my tablet I was able to switch between my home connection and my phone's wifi signal back and forth with no delay at all. But moving from my router's location to my repeater's location could not be done unless I waited 5-10 minutes whether it's on my phone or my tablet.
The entire network is on "802.11 G" (can't used mixed mode or N, that's a whole other story we're not going to get into here) and both router and repeater are set to exactly the same gateway, DNS, network name etc. Encryption is WPA2. The only difference between them is that my main router is set to be a DHCP server, while the repeater is not (it says I can leave DHCP Server off if the router's is on. Perhaps that's wrong, I still have to try that). And my router settings only shows WPA2-PSK while my repeater has more detailed options showing WPA2 Cipher Type: AES PSK/EAP: Personal.
omnius1 said:
I have a weird situation. I have an SMC8014W-G modem/router at my upstairs desktop and D-Link DAP-1360 Range Extender on the main floor. I can connect from wifi being initially turned off to either spot no problem. BUT I cannot move my phone or tablet from one of their locations to another unless I turn off my Tablet`s WiFi for about 5-10 minutes before turning at back on at the new location, or it will not connect. This is a problem with my network, because the same thing happens on my android phone. Still working on it. I`ve seen others across the web talk about this problem with other mobile devices, while saying the problem doesn`t happen on PC type devices like laptops.
To test that out, I turned my phone's hotspot on. Using my tablet I was able to switch between my home connection and my phone's wifi signal back and forth with no delay at all. But moving from my router's location to my repeater's location could not be done unless I waited 5-10 minutes whether it's on my phone or my tablet.
The entire network is on "802.11 G" (can't used mixed mode or N, that's a whole other story we're not going to get into here) and both router and repeater are set to exactly the same gateway, DNS, network name etc. Encryption is WPA2. The only difference between them is that my main router is set to be a DHCP server, while the repeater is not (it says I can leave DHCP Server off if the router's is on. Perhaps that's wrong, I still have to try that). And my router settings only shows WPA2-PSK while my repeater has more detailed options showing WPA2 Cipher Type: AES PSK/EAP: Personal.
Click to expand...
Click to collapse
I have a similar problem with my TP-link WA5210G wifi extender.
My laptop connect fine,but my phones for some reason don't want to connect,they just stay on the obtaining IP and don't connect,i have mine in universal repeater.
And my phone and PS3 will just not connect.
I am guessing that you have this thing turned on in "Repeater Mode"?
Are you using it in Repeater or WDS mode?
Repeater but I solved the issue with newer router now it's handing off properly. There's a slight disconnect and reconnect for a few secs when moving between the 2 points but that's liveable
Sent from my Atrix using Tapatalk
omnius1 said:
Repeater but I solved the issue with newer router now it's handing off properly. There's a slight disconnect and reconnect for a few secs when moving between the 2 points but that's liveable
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
That's how it should be unless you're using the commercial routers I use at work. Those are generally way above consumer price points, though. Even at my house, I have a four second handoff time between router and AP.
Hello, been a long time reader from my G1 to my G2 and now my nexus 4.
I am unfortunately not able to use my device on certain wifi networks which is a real bummer.
Being that i have a background in diagnosing computer problems in my real world life, i thought i would post my findings as i found some interesting things!
First i will say that the network i will use as the demonstration is secured with WPA2 PSK AES security and encryption.
I can connect to it and often find i have problems on the first connect to the network. By this i mean if i have made my wifi settings 'forget the network' and then try to connect again.
On the first time it seems to indefinitely hang, showing the message 'authenticating' on screen next to the network and if i long press on the network name and press modify, the dialog shows that i have a link speed of 1mbps.
I can usually get past this by turning wifi off and on and then reconnecting, at which point it will connect straight away and have a normal link speed. (in this example 72mbps).
After i am connected, i find that the following does not load:
-browsing webpages through chrome does not load
-the wifi icon turns grey
-play store cannot load anything
I find that i get assigned an ip address by dhcp correctly too with the right gateway and dns.
I decided to download a network tool to have a better look. I use fing personally.
I found it very interesting what i found, which no other threads about wifi issues mention.
Network discovery found every device on the local wifi network.
I was able to scan the services of my computer which is also on the network and it found everything, including a http server which i run which i could browse to.
In fact i could do everything through wifi with this device and most others.
Again it got interesting when I then took a look at my gateway, the router.
I had discovered its mac address which i can verify through my computer is correct which to my understanding, being that i can communicate through the wifi, means that i have the information available to send information to that physical device?
When trying to scan services, i find nothing, which is not true, at the very least it exposes a http server on port 80 which my computer can access.
When trying to ping i have 100% packet loss.
So at this point it is only the gateway i cannot access.
So i figure i could setup another computer which is connected to the network with a wire to share its connection through wifi onto that network and then i have a standin gateway?
I connected this computer through wifi to the network and pinged it succesfully with my phone. I then turn ICS on my wired adaptor to share to my wifi adaptor. I ensure that the wifi maintains an ip address in the right range and subnet.
I then try to ping that ip with the phone and it then gets 100% packet loss.
Could this be that when a device is configured to act as a gateway something changes about how it handles any packets sent to it that the nexus 4 is currently in compatible with?
elltg said:
So at this point it is only the gateway i cannot access.
So i figure i could setup another computer which is connected to the network with a wire to share its connection through wifi onto that network and then i have a standin gateway?
I connected this computer through wifi to the network and pinged it succesfully with my phone. I then turn ICS on my wired adaptor to share to my wifi adaptor. I ensure that the wifi maintains an ip address in the right range and subnet.
I then try to ping that ip with the phone and it then gets 100% packet loss.
Could this be that when a device is configured to act as a gateway something changes about how it handles any packets sent to it that the nexus 4 is currently in compatible with?
Click to expand...
Click to collapse
I have found a bit of a workaround that i can use!
When i said i turned on the wifi and ICS i did the following:
-Turned on wifi.
-Connected to wifi network.
-Turned on ICS on my wired network to share to my wifi
-Observed that my ip changed from 192.168.10.x to 192.168.137.1 with no gateway or dns.
-I decided to change my ip on the wireless to 192.168.10.x and gateway to my router 192.168.10.10
-I then tested.
I ran through this again but slightly different:
-Turned on wifi.
-Connected to wifi network.
-Turned on ICS on my wired network to share to my wifi
-Observed that my ip changed from 192.168.10.x to 192.168.137.1 with no gateway or dns.
-I decided to change my ip on the phone to 192.168.137.5 with gateway and dns as 192.168.137.1
-I then tested. And it works!
I know this doesnt fix the wifi issue itself, but for me, this makes a big difference as i can now use wifi at work where we also have poor mobile network coverage.
Edit:
Additionally i previously tried to setup this same computer to host a wifi network to share the connection using 'netsh' and creating a 'hostednetwork' but i found i was in the same situation where i still couldnt get the internet.
Hi, New poster so if I've posted in the wrong area please don't bite
I've been connecting my phone to a smart device (miracast-ing 'direct') but as of late the connection has become unstable and generally unusable. I had the brainstorm of using an old router to stabilize the connection, this seems to have done the trick but now I'm unable to access the mobile data as WIFI has assumed priority. Please bear in mind I don't have home internet so the router is being used solely as a go between for phone and smart device. Is there any possibility of WiFi connection whilst have access to mobile data or is this just a pipedream?
Thanks in advance
You can just start a wifi network from your phone, connect the smart devices to your phones wifi and use mobile data normal as internet connection (this is standard if you start a wifi network from phone). You wouldnt even need the router with this szenario, if the wifi signal of your phone isnt strong enough you can connect your router to the phone and extend the wifi with the router.
saturday_night said:
You can just start a wifi network from your phone, connect the smart devices to your phones wifi and use mobile data normal as internet connection (this is standard if you start a wifi network from phone). You wouldnt even need the router with this szenario, if the wifi signal of your phone isnt strong enough you can connect your router to the phone and extend the wifi with the router.
Click to expand...
Click to collapse
Thanks for the reply
But creating a mobile hotspot won't help because it doesn't solve the faulty (actually non-existent) miracast connection, plus I don't need a hotspot because only the phone needs internet access. My earlier explanation was probably a bit vague.
My goal is to mirror my phone's screen but to also have internet access solely on my phone.
Phone➡Smart Device➡Display - Can't connect (used to work faultless).
Phone➡Router➡Smart Device➡Display - Connects but no mobile data available because the phone thinks the router has internet access covered.
Dowtish said:
Thanks for the reply
But creating a mobile hotspot won't help because it doesn't solve the faulty (actually non-existent) miracast connection, plus I don't need a hotspot because only the phone needs internet access. My earlier explanation was probably a bit vague.
My goal is to mirror my phone's screen but to also have internet access solely on my phone.
Phone➡Smart Device➡Display - Can't connect (used to work faultless).
Phone➡Router➡Smart Device➡Display - Connects but no mobile data available because the phone thinks the router has internet access covered.
Click to expand...
Click to collapse
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
saturday_night said:
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
Click to expand...
Click to collapse
Cheers will try it out.
Hopefully that sort of config is available on my router as it is loaded with a custom firmware from my old ISP provider.
Thanks
saturday_night said:
Creating a hotspot is not for giving the other devices in your network internet access, this is the only way you can use the wifi on your phone with using mobile data at the same time. I dont know why but android devices never use mobile data when they are connected to a wifi network and there is no internet access available. So if you configure your router as a wifi repeater and setup the phone as base station, your wifi signal from phone to router should be good and you can connect your other devices to the router, the phone should see all devices in the same network if you stop the dhcp server in your router and only use the one from your phones hotspot. Should look like this :
Phone (with DHCP) <----Router---->Smart Device---> Display
Click to expand...
Click to collapse
Router ISP custom firmware seems restrictive (no advanced wireless settings) plus WDS is not officially supported.
Possibly achievable but beyond my technical savvy
Thanks for the advice anyways.
Dowtish said:
Hi, New poster so if I've posted in the wrong area please don't bite
I've been connecting my phone to a smart device (miracast-ing 'direct') but as of late the connection has become unstable and generally unusable. I had the brainstorm of using an old router to stabilize the connection, this seems to have done the trick but now I'm unable to access the mobile data as WIFI has assumed priority. Please bear in mind I don't have home internet so the router is being used solely as a go between for phone and smart device. Is there any possibility of WiFi connection whilst have access to mobile data or is this just a pipedream?
Thanks in advance
Click to expand...
Click to collapse
Do not use WiFi 5Gz , use only 2,4Gz, and wifi 5Gz off for router and smartphone