Related
I'm having very low volume even at max when listening to music with headphones. Are you experiencing the same?
I haven't had this issue.
what music app are you using? try the stock app with SRS WOWHD in equalizer.
simplistian said:
what music app are you using? try the stock app with SRS WOWHD in equalizer.
Click to expand...
Click to collapse
is the stock app called "Music"?
i couldnt find a setting with equalizer.. in fact i couldnt find any settings in this app..
iamelton said:
is the stock app called "Music"?
i couldnt find a setting with equalizer.. in fact i couldnt find any settings in this app..
Click to expand...
Click to collapse
try to play a song first, then hit the menu button, you won't see the settings in playlists.
simplistian said:
try to play a song first, then hit the menu button, you won't see the settings in playlists.
Click to expand...
Click to collapse
got it.. thx!
iamelton said:
got it.. thx!
Click to expand...
Click to collapse
No luck for me. I have installed the Honeycomb Music app and removed the Froyo app. This one doesn't have much at all in settings. Anyone else?
Also my loud speaker and phone speaker are simply not loud enough. Any noise at all nearby and I cannot hear the caller talking. Do you think there will be fixes for this?
GolfCranK said:
No luck for me. I have installed the Honeycomb Music app and removed the Froyo app. This one doesn't have much at all in settings. Anyone else?
Also my loud speaker and phone speaker are simply not loud enough. Any noise at all nearby and I cannot hear the caller talking. Do you think there will be fixes for this?
Click to expand...
Click to collapse
I suggest to get the stock Music app back, your will be surprised by the SRS WOWHD equalizer with a good earplug
Try experimenting with the values in /system/etc/hwVolumeFactor.cfg. I haven't tried modifying this as I don't have an issue but I'm sure it's what you're looking for. It only has values for wired headset and speaker though, so whether speaker is both earpiece and loudspeaker or just loudspeaker I don't know. Give it a go and post your results.
@stockwell
You are right.
You have to increase the value "wired_headset". I changed mine from 60 to 70 and now it works prefectly with my on-ear headset. A bit too loud at max though.
If you need assistance feel free to ask ;-)
@AliWam- Please give instructions. Will be appreciated.
Hi !
Do i need to root my phone to change the value to 65 or above?
I cant save the changes because the mapp is write protected
Hey,
I'm sorry for the late reply, quite busy these days.
I take no responsibility for any harm that comes to your phone as a result of applying this mod.
1. You need a rooted device (e.g. z4root), Busybox[1] installed and a text editor (e.g. Text Editor from Market).
2. Open /system/etc/hwVolumeFactor.cfg in the text editor, replace the value(s) as you like and save it as a new file e.g. /mnt/sdcard/myVol.cfg. The file might look like this:
Code:
speaker=80
wired_headset=70
3. Remount the related partition writeable:
Code:
mount -o remount,rw /dev/block/mmcblk0p12 /system
4. Copy your new file and replace the old system file:
Code:
cp /mnt/sdcard/myVol.cfg /system/etc/hwVolumeFactor.cfg
5. Reboot your phone and then the new values should be applied.
------
[1]I'm not sure if you really need Busybox installed for these steps.
no sdk
To change the volume without the SDK (not use console command).
- install on your computer AndroidCommander
- in the phone menu choose the "applications / developer / debugging usb"
- connect phone to a PC
- run AndroidCommander on your computer.
- find / system / etc / hwVolumeFactor.cfg in AndroidCommander (right panel is a telephone system files)
- copy the file "VolumeFactor.cfg" to your computer and change values
- in the left window AndroidCommander find the edited file and move (copy) to "/ system / etc / hwVolumeFactor.cfg" on the window phone.
- disconnect the phone and restart
In this way you can change other files, but be careful .
Guys, i try all this even tho my phone is rooted when i paste my new file says its read only and when i try at android commander it says not rooted even tho it is i checked with root checker !!
any ideas ?
ektorgre said:
Guys, i try all this even tho my phone is rooted when i paste my new file says its read only and when i try at android commander it says not rooted even tho it is i checked with root checker !!
any ideas ?
Click to expand...
Click to collapse
I had no success changing the values in the file / system / etc / hwVolumeFactor.cfg using "es explorer" so upon advice in another thread I bought Root Explorer in the Market and it works. Once you are in the etc folder press the Mount R/W button and then you can edit the .cfg file by longpressing on it. It will auto create a backup. I increased my values to 99 and 70.
I also found from a poster here that the stock music player has an equalizer that you only see once you select a track to play. The default setting is very quiet but the SRS WOWHD is much better. Happy listening
Sorry for my silliness in advance guys. I can't make Android Commander work. It says "device not found". Have any ideas on what I'm doing wrong?
Alexcxvtr said:
Sorry for my silliness in advance guys. I can't make Android Commander work. It says "device not found". Have any ideas on what I'm doing wrong?
Click to expand...
Click to collapse
Make sure you have debugging enabled on the phone:
Go to settings > applications > development
Then enable USB debugging.
Poulsen8r said:
Make sure you have debugging enabled on the phone:
Go to settings > applications > development
Then enable USB debugging.
Click to expand...
Click to collapse
Thanks for the quick response. I do have usb debugging enabled. I can't figure out what I'm doing wrong whatsoever. Any other ideas?
Computer:
Is the SDK installed and did you set your path variables?
Have you installed the ADB driver for the phone?
Phone:
Do you have busybox?
Root?
Exclusive MODDED ROM EQS-v2.0M
CS968 a RK3188 ChipSet Based TVBoX
AKA: TV01 [GeekBuying] CR11s [CloudNET2GO]
THIS VERSION HAS NATIVE 1080P KERNEL, NOT SAME AS V1.
IMPORTANT INFORMATION:
WE JUST LEARNED THERE ARE A FEW CS968/TV01/CR11s MODELS equipped with different WIFI/BT MODULES.
Thanks to dFenix we figured this out. [More info]
THIS ROM IS FOR AP6210 WIFI CHIP bundled devices, MAINBOARD VERSION 2.
So if you try this rom on other models you may loose your wifi connection.
Click to expand...
Click to collapse
IMPORTANT NOTICE:
THIS IS KIND OF BETA/ALPHA FIRMWARE OR WHATEVER YOU WANT TO CALL IT.
CURRENTLY I HAVE EXPERIENCED NONE PROBLEM AND IT SEEMS EVERYTHING INCLUDING 1080P MODE WORKS FINE.
THIS IS AN EXCLUSIVE ROM BECAUSE THERE ARE A FEW THINGS FACTORY FIRMWARE HAS NOT.
SYSTEM IS SAME AND NOTHING HAS BEEN MODIFIED EXCEPT SUPERUSER and BUILD.PROP, SO IF THERE IS A BUG THEN THAT IS FIRMWARE RELATED THIS ISN'T SUPER DUPER FIRMWARE AND DOESN'T HAVE SPECIAL KERNEL OR RECOVERY, EVERYTHINGS IS STOCK.
NOTE : LIBMEDIA.SO REPLACED, READ BELOW...
Factory Date : 09-12-2013 from CloudNET based CR11/s
Modification Date: 21-12-2013
NOTICE: THIS IS FOR 2 MPX VERSION, NOT FOR 5 MPX
You may harm your device, if you flash this firmware to 5 mpx camera version.
LCD Display density has been set to 240, if you need smaller icons and texts you can easily change by using preinstalled DPI changer program (May need root permission after first start).
Features:
Rooted [ You may notice a bit difference than v1 version, but it is normal ]
Build tweaks
TCP Tweaks (Buffering etc...)
Networking Tweaks
Wifi Tweaks (Signal etc...)
Multimedia Tweaks
Streaming Tweaks
HW Video Acceleration by default
Spoofed as Galaxy S3
Date format set to European
Timezone Europe GMT +1
Renewed bootanimation
Renewed wallpaper
Add: SuperSU.apk (Updated)
Add: LuckyPatcher (Updated)
Add: RootBrowser (NEW)
Add: OGYoutube with downloader [ Original YouTube still can be apartly installed ]
Add: Dolphin Browser 10.1.2
Add: Android Weather
Add: JetAudio
Add: Blueput Droid (NEW)
Add: Texdroider DPI (NEW)
Add: BSPlayer FREE (NEW)
Add: Cifs Manager (NEW)
Add: ESFile Explorer (NEW)
Add: Patched Libmedia.so (Many thanks hillyu from FreakTab, More info)
Updated : AddAway (Update)
Removed : All of useless chinese media stuff
Removed : Chrome
Removed : Search Box
Removed : Google Stuff (Search, maps, gmail, talk)
Removed : Email
Removed : XBMC Installer (Not everyone's taste)
Removed : A few more crap...
Exclusive test modules : Tun, Cifs*, NFS, NTFS and Xpad these modules are not installed by system, must be done manually from console/terminal.
Included CIFS MANAGER can do it for you, you don't need to install from terminal.
Exlusive bootanimation (Renewed)
Good working Remote Control.
Faster Internet browsing, smoother streaming, Very nice playing 1080p media from NAS DRIVE
*: It seems cifs module won't work properly, it is interesting because it was allright with K-R42 device but I'll search for it.
v2.0M CHANGES
NEW*: MultiWindow
*Needs Xposed Framework to be installed completely.
NEW*: Xposed Framework Installer
*Installation must be done via program self, then after reboot you may download modules as much as you want
REPLACED : BSPLAYER-> MX PLAYER FREE - No Codec pre-installed
REMOVED : JETAUDIO
UPDATE : LUCKY PATCHER, ADAWAY
UPDATE : DOLPHIN BROWSER 10.2.1
Re-Add : RKVideo player, RKExplorer
A few fixes that causes problems.
More optimized video playback (about 40 mbps mkv from network drive), more stable system.
LCD Density set to : 160 (Smaller icons and texts by default)
A little bit faster than 2.0 version.
Feel free to test or build new one, no words for future updates or versions etc.
FLASH WITH YOUR OWN RISK, I'M NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY FLASHING OR AFTER.
AnTuTu Results
Devhost / Mirror
password : cs968eqs
Firmware flashing guide.
[ HD QUALITY BOOT ANIMATIONS... ]http://forum.xda-developers.com/showthread.php?t=2612221
hi
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?
fakotibor said:
Hi Equancy,
Is a small community of CS968 users here: freaktab.com/forumdisplay.php?165-CS968-CR11s-amp-similar-sticks
Would you like to share this rom there too?
Click to expand...
Click to collapse
Hi,
Yeah, it seems not much users have CS968 here in XDA but, I'm a member of XDA-Dev and I share what I have here, but you may share this thread on freaktab as yours if you wish.
I have no account on FreakTab and I don't think I may able to manage this thread on multiple forums.
So, I can answer questions only here and also publish updates of my rom.
Thanks for your interest.
Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.
resansid said:
Hi Equancy, I cant download this file.
(Error no: 1) Connection failure : User 'proxy_iamheman' has exceeded the 'max_user_connections' resource (current value: 10)
What seems to be the issue. please fix the link. Thanks.
Click to expand...
Click to collapse
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I've uploaded another Mirror-link working well.http://www.filedropper.com/showdownload.php/cs968051213eqsv2m
EQUANCY said:
Try primary download host (Devhost), its working flawlesly.
I guess mirror host has problem rightnow.
I'll make more mirrors soon.
Click to expand...
Click to collapse
OK This worked. Thanks.
resansid said:
OK This worked. Thanks.
Click to expand...
Click to collapse
Your welcome. :good:
Or you may try from here too.
@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???
hanu_blr said:
@EQUANCY,
i tried your rom, looks good. few things are not wrking
1. xposed: i installed xposed framework, rebooted, then installed GravityBox, none of the tweaks in it wkrs. like transparent status bar/traffic meter.
after installing the GB and setting it up, i rebooted, but still not wrking.
2. window support is also not wrking. hv added some of the apps to wkr in window mode, but all run in full screen.
Have you tried these on ur rom ???
Click to expand...
Click to collapse
Yes,
Multi-window not working, but some features of Gravitybox well.
Actually I've put Multi-window by mistake, it was a bit late when I saw
However you may remove this app by following steps below.
1- Deactivate Multi-window app in Xposed modules menu (uncheck)
2- Reboot
3- Open RootBrowser and go to System/app directory
4- Long press on multi_window.apk and select Delete
I didn't tested all of modules and most of them are not working properly because of Tablet UI, I'll remove both application in next firmware mod.
Sorry for inconvenience, thanks for understanding.
Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.
daviddema said:
Hi Equancy,
I am having issues with wifi direct. I can establish the wifi direct connection with the other device (Samsung Galaxy S3) just fine, I can send files from the box to the SG3, but I absolutely can't receive files sent from the SG3 to the box (I never even get the prompt).
I also tried to use the Superbeam app, and same story: I can send files out but not receive them.
Any clue? I am not sure whether this is specific to your ROM as I haven't tried with any other.
Cheers, Merry Christmas and Happy New Year to you.
Click to expand...
Click to collapse
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...
NFS help needed
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...
PsychicSaint said:
I tried the rom on my cr11s and i must say its awesome except that its a bit slow.. i also can't get nfs to mount thru adb nor cifsmanager.. does the supplied nfs.ko support nfsv4? Everything else is working with no major issues.. thanks for the rom anyways...
Click to expand...
Click to collapse
It is very little bit slower than v1.1 but its not really noticable on 2D applications, can you specify what have you experienced actually?
I'm using a NTFS formatted NAS drive with no problem, even watching MKV files about 40-50 mbps rate. (NetGear ReadyNAS).
All of thoose modules have been supplied but not loaded by default need manually installed or you must add lines to the init.rc from system.
This can't be automatically because Kernel needs to be modified and I don't want to do that.
NFS module is actual module for RK3188.
If you more specify problem may be I can look it for you.
And for your consideration...
Some issues are FIRMWARE RELATED, because these firmwares aren't fully optimized, just generic RK3xxx roms.
Not good drivers at all...
And not all manyfacturers optimizes their own firmwares.
Produce and forget policy.
EQUANCY said:
hi,
Thanks for your best wishes, hoping same for you.
For the issue,
Possible answer for WiFi Direct function is Firmware related, because I didn't touched any system file except su binary and build.prop.
I also tested by my self, receiving files from TVBox is working but transfering to the device isn't via SuperBeam.
As I said before, I suppose it is a firmware bug and must be reported.
And question is:
To who
However, you may ask other users who is using another firmware versions or custom roms.
Happy new years...
Click to expand...
Click to collapse
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)
daviddema said:
I sent a email to cloudnetgo support, let's see what comes out (probably nothing...)
Click to expand...
Click to collapse
You've done very well my friend, please let us know if you get an answer from them.
EQUANCY said:
You've done very well my friend, please let us know if you get an answer from them.
Click to expand...
Click to collapse
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...
@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???
daviddema said:
I also tried to get screen mirroring to work with the wifidisplay app included in the ROM (is this also part of the original image or did you add it?).
Again, I can set up the mirroring connection between a Samsung Note 3 and the wifidisplay app, but then actual mirroring never happens. I suspect that whatever causes wifi direct not to work also causes the mirroring not to work... pity as this is would be a nice feature...
Click to expand...
Click to collapse
Wifi Display part of firmware self, I didn't add by myself and yes it is not working properly, I've read at somewhere this application supports only Nexus devices but I'm not sure.
hanu_blr said:
@EQUANCY,
I have a strange issue related to sound settings, its because of the stock firmware issue, hope you give some pointers on this
in the sound devices settings, there is input sound device and o/p sound device. I understand abt the output sound device, but what is the use of input sound device ? and is by default always set. Is there a way to disable the i/p device ?.
I ask this bcasue, my sound bar sony will cutoff the sound to other devices if the cs968 device is switched-off, if in on/standby mode, the sound passthorough (via cs968 )for other devices i hv connected to my soundbar. My guess is that since sound input device is checked(Radio button on), sound bar thinks that it has to pass through cs968. If i unplug the hmdi cable from cs968, the soundbar wrks fine.
My guess is that somewhere in the settings xml file, there shd be a way of disabling the sound input device.
I tried decompiling settings.apk and settingsprovider.apk searched all file with sound as filecontent key, but could not find anything related to disabling of sound input device.
can you help me on this ???
Click to expand...
Click to collapse
Disabling sound input?
As much as I know, the only sound input is internal microphone.
I real don't know the other sound inputs and als no clue about disabling it.
If you mean sound output such as Analog, Optical and HDMI then may be there is option but for input, I have no idea.
Sorry.
Uninstall Apps
How can I unistall app like bsplayer?
Thanks
Hi,
Open RootBrowser (usually opens in main directory) if not then got to Main Directory first then next to
\System\App
And long press the application which you want to remove and select Delete.
Or download a root uninstaller from market then uninstall what you want.
Hope this helps.
how can i disable/hide developer options after enabling it in pie?
vasu1 said:
how can i disable/hide developer options after enabling it in pie?
Click to expand...
Click to collapse
Turn it off.
WhatzIt2Ya said:
Turn it off.
Click to expand...
Click to collapse
but turning it off, disables all options, which are enable by default in developer options
vasu1 said:
but turning it off, disables all options, which are enable by default in developer options
Click to expand...
Click to collapse
False.
WhatzIt2Ya said:
False.
Click to expand...
Click to collapse
try n check it yourself,, by turning it off everything gets greyed out
vasu1 said:
try n check it yourself,, by turning it off everything gets greyed out
Click to expand...
Click to collapse
Obviously, they're just the options for you to turn off (that are on by default, which means, even without developer options on, they're still on in the background).
any help here?
vasu1 said:
any help here?
Click to expand...
Click to collapse
Help with what? You have been given the answer.
If you don't want that option appears you have to do a factory reset and never activate it I guess.
ccalixtro said:
If you don't want that option appears you have to do a factory reset and never activate it I guess.
Click to expand...
Click to collapse
that's the same as disable it in About phone > Dev options, since it resets any modification (such as ADB Debugging).
portox said:
that's the same as disable it in About phone > Dev options, since it resets any modification (such as ADB Debugging).
Click to expand...
Click to collapse
Yeah but what I understand is that he doesnt want to see never more that option.
If you are rooted:
1. use a file manager like Mixplorer
2. go to /data/system/users/0/
3. open settings_global.xml file in a text editor
4. search for "development_settings_enabled", it will find a line with value=1 (if you did enable dev options, obviously)
5. change the value to 0
6. reboot
Remember that before you change the line, you have to set all the settings you want, don't disable Dev Options, then follow the steps I said. Reboot and the settings you enabled before will keep, but Developers Options will hide.
If your device isn't rooted, unfortunately I can't help you.
I confirm it's working since I disabled animations and they kept disabled after reboot.
vasu1 said:
how can i disable/hide developer options after enabling it in pie?
Click to expand...
Click to collapse
Just clear setting's data and cache.
Simple
This tutorial was made by Craftingmod
Thanks so much for helping us.
Original Post: HERE
--------------------------
Note:tested only on GSI ROMs 9.0
1. Bluetooth audio connection fix
Backup the file /vendor/overlay/BluetoothResCommon.apk
Simply remove /vendor/overlay/BluetoothResCommon.apk via root explorer
2. aptX HD
Install "Bluetooth stack audio bitrate changer for SBC + aptX & aptX-HD enabler" from Download of Magisk Manager or Download Here (APTX for Android Oreo & Pie NOT WORK)
3. build.prop
Open /vendor/build.prop and find "persist.vendor.bt.a2dp_offload_cap=sbc-aac" and replace "sbc-aac" to "sbc-aac-aptx-aptXHD" (Add -aptx-aptXHD)
Note: if you don't find the add "persist.vendor.bt.a2dp_offload_cap=sbc-aac-aptx-aptXHD"
4. Restart device and test
Note: if it doesn't work undo everything you did thanks for trying
Hello my magisk cannot seem to find the module you were referring to. Do you have another link where i can download the module?
Hi There, and many thanks for you guides https://forum.xda-developers.com/member.php?u=9792389
This guide made bluetooth audio and connectio work, but bluetooth calling is not working. Can call but no sound is transmitted, so i cant use it. Any suggestions as how to proceed?
thorvall said:
Hi There, and many thanks for you guides https://forum.xda-developers.com/member.php?u=9792389
This guide made bluetooth audio and connectio work, but bluetooth calling is not working. Can call but no sound is transmitted, so i cant use it. Any suggestions as how to proceed?
Click to expand...
Click to collapse
try this , hopefully it will do the trick:
https://forum.xda-developers.com/showpost.php?p=79191978&postcount=5https://forum.xda-developers.com/showpost.php?p=79191978&postcount=5
I worked.
Fillint said:
try this , hopefully it will do the trick:
https://forum.xda-developers.com/showpost.php?p=79191978&postcount=5https://forum.xda-developers.com/showpost.php?p=79191978&postcount=5
Click to expand...
Click to collapse
Thanks :good: . I actually did look at the thread before, but had the impression that the GSI Treble roms were of the ASOP variant, contrary to the note: 'NOTE: This works only on CAF based custom roms. It doesn't work on AOSP.'
Am I wrong, or is it the note that does not apply in this case?
it looks like not both ways aren't working for 9.0 Havoc.
we need better solutions.
I tried these solutions on the Lenovo Z5 pro GT, but the Phone won't recognise any bluetooth IEM's. The sound keeps playing over the speaker. Does anyone have a solution?
When I change vendor to r/w it goes back to file system read only and I can't save the build.prop file afterwards
If someone was able to make it work can you please show me the build.prop permissions!!
this ROM is awesome. but there's a problem. my BT headphone no sound.
in developer options, "disable bluetooth A2DP hardware" can't be turned off. any solution?
And for xiaomi devices?
What is the apk that I have to delete if my device had miui?
in all the GSI images i installed audio BT is not working.
And BluetoothResCommon.apk is not in that path, why ?
build.prop is there but there is no "persist.vendor.bt.a2dp_offload_cap=sbc-aac-aptx-aptXHD" entry
Any help to fix bluetooth for this case ? I can pair, to headphones connect, for a moment seems to work, but finally audio get played in the phone itself.
kidronvalley said:
in all the GSI images i installed audio BT is not working.
And BluetoothResCommon.apk is not in that path, why ?
build.prop is there but there is no "persist.vendor.bt.a2dp_offload_cap=sbc-aac-aptx-aptXHD" entry
Any help to fix bluetooth for this case ? I can pair, to headphones connect, for a moment seems to work, but finally audio get played in the phone itself.
Click to expand...
Click to collapse
Overcame the lack of sound in BT headphones on android 10 by replacing system / lib / libbluetooth.so and system / lib64 / libbluetooth.so with stock firmware
AllexBast said:
Overcame the lack of sound in BT headphones on android 10 by replacing system / lib / libbluetooth.so and system / lib64 / libbluetooth.so with stock firmware
Click to expand...
Click to collapse
im gonna try this too because my Maxpad i10 plus as this issue
blaze2051 said:
im gonna try this too because my Maxpad i10 plus as this issue
Click to expand...
Click to collapse
Teclast M40 How to unlock bootloader?
I have found a method of Teclast P20HD to unlock bootloader which can be found in "https://forum.xda-developers.com/android/help/teclast-p20hd-android-10-tablet-4g-t4141997" and "https://forum.hovatek.com/thread-32287.html", but I'm not sure if...
forum.xda-developers.com
@AllexBast
by any chance have you experianced slow command response with ADB? I just install win10 1803 pro and its so so slow to even run adb devices command. does it make a difference if my device is running GSI Phh A11?
Did the trick for me! Thank you
SrCDA said:
This tutorial was made by Craftingmod
Thanks so much for helping us.
Original Post: HERE
--------------------------
Note:tested only on GSI ROMs 9.0
1. Bluetooth audio connection fix
Backup the file /vendor/overlay/BluetoothResCommon.apk
Simply remove /vendor/overlay/BluetoothResCommon.apk via root explorer
2. aptX HD
Install "Bluetooth stack audio bitrate changer for SBC + aptX & aptX-HD enabler" from Download of Magisk Manager or Download Here (APTX for Android Oreo & Pie NOT WORK)
3. build.prop
Open /vendor/build.prop and find "persist.vendor.bt.a2dp_offload_cap=sbc-aac" and replace "sbc-aac" to "sbc-aac-aptx-aptXHD" (Add -aptx-aptXHD)
Note: if you don't find the add "persist.vendor.bt.a2dp_offload_cap=sbc-aac-aptx-aptXHD"
4. Restart device and test
Note: if it doesn't work undo everything you did thanks for trying
Click to expand...
Click to collapse
Thanks, but editing /vendor/build.prop reaquires writing onto /vendor, so what are the apps to offer rw for /vendor?
hd_scania said:
Thanks, but editing /vendor/build.prop reaquires writing onto /vendor, so what are the apps to offer rw for /vendor?
Click to expand...
Click to collapse
It can be done with root or in TWRP.
But now most phones have aptx-aptXHD support in original firmware, so there's a high possibility you don't need this step. By the way, it is not worth it to fix A2DP though, cause for now it's almost not possible (at lease I didn't solution) to fix bluetooth in call and A2DP offload at the same time. For me bluetooth in call is more important, and there's actually no side effect to turn off A2DP offload as far as I understand.
Anyways, to make bluetooth in call and Aptx (of course others like LDAC) both work, you'll need to:
1. remove /vendor/overlay/BluetoothResCommon.apk (if presented) (if presented and deleted, do a factory reset)
2. remove /vendor/etc/a2dp_audio_policy_configuration.xml
3. Enable "Force-disable A2DP offload" in phh settings
4. Enable "use alternate audio policy" in phh settings if your volume adjustment have any problems (if you got multi ones in different feature category, try different combination until it behave normally)(may require reboot)
5. flash Magisk module "aptx-HD-magisk-10_arm.arm64.zip" to fix aptx support
Now both sbc-aac-aptx-aptXHD-LDAC and bluetooth in call should work. Tested on 2 Qualcomm setups recently with phh android 12 based rom.
Hope this could help you and others having same issues.
XT19443 said:
And for xiaomi devices?
What is the apk that I have to delete if my device had miui?
Click to expand...
Click to collapse
Tho Xiaomi's MIUI really modified the whole aosp crazyly,but the device itself is still treble-compactible
the file is called MIUIbluetoothres.apk(probably,on miui 12.5's vendor)
BUT you dont need to del it.
To Fix: TURN ON "force disable a2dp offload" in phh treble settings.
that's it.(worked on redmi 10a.(MTK))
(ps: actually aptx is a qcom thing so it probably wont work on mtk devices.)
Having an issue with hiding the status bar, no option in any of the settings menu or system menu. The system is not rooted so using most apps to enable immersive mode is non-functional, they also have apps that require no root but the keyboard won't work or it only hides the status bar for the home screen and no all the apps also I have no idea how to adb into the head unit. Wanted to see if anyone here had any clue on a fix or have had the dame issues and has a workaround. Thank you in advance.
I have a new PX5 Android 10
PBX80JCCLTrying to enable developer options, I tap the Build number 7 times and more and it does nothing.
I've tried many things and still nothing.
System is original and not rooted.
I need to see my usb settings and possibly change them.
Can I enable with terminal emulator?
Anyone have any ideas?
james73448 said:
I have a new PX5 Android 10
PBX80JCCLTrying to enable developer options, I tap the Build number 7 times and more and it does nothing.
I've tried many things and still nothing.
System is original and not rooted.
I need to see my usb settings and possibly change them.
Can I enable with terminal emulator?
Anyone have any ideas?
Click to expand...
Click to collapse
FOUND...... enable by typing ABDON in password for factory settings.
james73448 said:
FOUND...... enable by typing ABDON in password for factory settings.
Click to expand...
Click to collapse
i ended up flashing a custom firmware and gave em root