Database Users

Bootloop on OP2 after 3.1.0 OTA

Hello everyone.
I've recently got the notification from the updater saying that oxygen OS 3.1.0 was out and awaiting to be downloaded (was on 3.0.2).
Since I unlocked bootloader/installed twrp/installed supersu when I was on 2.1.0 I wanted to update using the same method that I had used to update it before: install full zip of 3.0.2, install zip 3.0.2->3.1.0, install supersu
Problem is after I've done this the phone was stuck into booting animation when booting into system.
And since I'm dumb and nervous I thought that wiping /system before the installation was the solution.
So once again, this time with also system wipe, full 3.0.2->ota update->install supersu
Now you already probably understood that not only the phone is booting forever, but also I lost access to twrp and only have fastboot showing up when trying to boot through power+vol up
What can I do? What did I do wrong?
Thanks for the attention
Edit: I can access recovery, had the wrong combo of buttons going (i was pressing power+vol up but it's power+vol down)
I repeat, TWRP is fully accessible
Edit 2: Since TWRP was fully accessible I reinstalled both full zip and 3.0.2->3.1.0 zip without supersu and it booted... What did I do wrong with supersu?

Depends on the SuperSU zip y supposed you need the one specific for oos3 beta or h2os
Sent from my ONE A2005 using Tapatalk

I fresh installed 3.1.0 but after booting up and flashing supersu v2.78 i get bootloop. Before it always worked so i think we need to wait for an updated version of supersu.
I boot in fastboot modes by volume up + power and then connect with pc en boot in recovery with fastboot command. 'fastboot boot recovery.img'

Burn2Hell said:
I fresh installed 3.1.0 but after booting up and flashing supersu v2.78 i get bootloop. Before it always worked so i think we need to wait for an updated version of supersu.
I boot in fastboot modes by volume up + power and then connect with pc en boot in recovery with fastboot command. 'fastboot boot recovery.img'
Click to expand...
Click to collapse
Did you try flashing the modified SuperSu 2.78 zip?

I had the same problem until I flashed the SuperSu mentioned from Spannaa the post before.

It happened to me too and the fix is to flash the modified supersu.

Nimwe said:
Hello everyone.
I've recently got the notification from the updater saying that oxygen OS 3.1.0 was out and awaiting to be downloaded (was on 3.0.2).
Since I unlocked bootloader/installed twrp/installed supersu when I was on 2.1.0 I wanted to update using the same method that I had used to update it before: install full zip of 3.0.2, install zip 3.0.2->3.1.0, install supersu
Problem is after I've done this the phone was stuck into booting animation when booting into system.
And since I'm dumb and nervous I thought that wiping /system before the installation was the solution.
So once again, this time with also system wipe, full 3.0.2->ota update->install supersu
Now you already probably understood that not only the phone is booting forever, but also I lost access to twrp and only have fastboot showing up when trying to boot through power+vol up
What can I do? What did I do wrong?
Thanks for the attention
Edit: I can access recovery, had the wrong combo of buttons going (i was pressing power+vol up but it's power+vol down)
I repeat, TWRP is fully accessible
Edit 2: Since TWRP was fully accessible I reinstalled both full zip and 3.0.2->3.1.0 zip without supersu and it booted... What did I do wrong with supersu?
Click to expand...
Click to collapse
Can you please specify the brief step by step procedure of flashing 3.1.0 on 3.0.2 (Clean flash)!Please!
Sent from my ONE A2003 using Tapatalk

nitishgupta said:
Can you please specify the brief step by step procedure of flashing 3.1.0 on 3.0.2 (Clean flash)!Please!
Click to expand...
Click to collapse
Download the full OOS 3.1.0 zip from post #1 in the Oxygen mirrors thread and flash it via recovery.
If you want root, flash a SuperSU zip from the same post.

want to install lineageos 16 but dont know of a/b partitions

i'm a newbie in the A/B partitions system previously i have installed many roms on many Android phones but all of them are below android 6.0. now i moved to Mi A1 and i flashed TWRP and rooted my phone with Magisk18 now i have tried to flash lineageOS 16 on stock Pie but when i tried to flash it asks for slot_a or slot_b and i dont know anything about a/b partitions so i quit installation and write this thread pls help.

iamranjodh said:
i'm a newbie in the A/B partitions system previously i have installed many roms on many Android phones but all of them are below android 6.0. now i moved to Mi A1 and i flashed TWRP and rooted my phone with Magisk18 now i have tried to flash lineageOS 16 on stock Pie but when i tried to flash it asks for slot_a or slot_b and i dont know anything about a/b partitions so i quit installation and write this thread pls help.
Click to expand...
Click to collapse
there you go
https://www.xda-developers.com/how-...ess-updates-affect-custom-development-on-xda/

1. Flash or update to lastest stock rom
2. Boot twrp (don't flash TWRP, just boot) from:
https://forum.xda-developers.com/mi-a1/development/treble-twrp-installer-treble-manager-t3793637
3. Wipe to factory
4. Install LOS16
5. Reboot to bootloader and boot TWRP again
6. Flash gapps and magisk if you need it
That's what I did and works like a charm but I prefer RR.
Cheers!

ccalixtro said:
1. Flash or update to lastest stock rom
2. Boot twrp (don't flash TWRP, just boot) from:
https://forum.xda-developers.com/mi-a1/development/treble-twrp-installer-treble-manager-t3793637
3. Wipe to factory
4. Install LOS16
5. Reboot to bootloader and boot TWRP again
6. Flash gapps and magisk if you need it
That's what I did and works like a charm but I prefer RR.
Cheers!
Click to expand...
Click to collapse
This method is not working. We have to use a special bootable TWRP for LOS 16 Official builds.
Sent from my Mi A1 using XDA Labs
---------- Post added at 09:52 PM ---------- Previous post was at 09:33 PM ----------
iamranjodh said:
i'm a newbie in the A/B partitions system previously i have installed many roms on many Android phones but all of them are below android 6.0. now i moved to Mi A1 and i flashed TWRP and rooted my phone with Magisk18 now i have tried to flash lineageOS 16 on stock Pie but when i tried to flash it asks for slot_a or slot_b and i dont know anything about a/b partitions so i quit installation and write this thread pls help.
Click to expand...
Click to collapse
Try following these steps:
1. Download and boot this TWRP. Only boot it, don't flash it. https://drive.google.com/file/d/1LtLrNnL0h7alZaaOWADvc2Sf5aNkNukM/view
2. Wipe system, data, cache and dalvik. If you are encrypted, make a Format Data.
3. Go to Reboot and select other slot. (For example, if you are on Slot A, select Slot B)
4. Boot TWRP again.
5. Wipe system, data, cache and dalvik. Make a format data again.
6. Install latest LineageOS 16 Official nightly. You can select A or B.
7. Reboot to bootloader.
8. Boot TWRP again.
9. Flash GApps and Magisk (if you want root).
10. Reboot to system and enjoy Lineage!
Sent from my Mi A1 using XDA Labs

Always boot in recovery mode after an update

Hi,
I was updating my OP6T to the new version (Magisk + Xxx NoLimits), but after the reboot post-update the device started to reboot to recovery after it booted. So I've tried to delete Magisk but the problem was still present, so I've decided to download the latest Oxygen ROM from the OnePlus and flash it from TWRP, but after flashing, the device started to always boot to recovery (before the OnePlus boot animation).
At least i tried to restore a nandroid backup of 1 month ago (System, Boot and Data), but still the device after the restore still boot to recovery before the boot animation.
I've only tried the system reboot (I've not tried to force boot another slot).
Do you have a solution to try before formatting the internal storage?
Thanks
Edit: After unistalling magisk and reflashing it again, now the device boots again, but immediately after (when the lock screen appear) the device reboot automatically to recovery again

Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.

null0seven said:
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
Click to expand...
Click to collapse
Factory reset from TWRP?

yes

null0seven said:
yes
Click to expand...
Click to collapse
So, do you mean the classic Wipe data, cache and dalvik?

https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
TWRP Users
1. Boot into TWRP and Flash the Latest Magisk Uninstaller
2. Flash the latest Full Oxygen OS Zip
3. Flash the TWRP installer Zip
4. Reboot to RECOVERY to make sure TWRP stays and continue to root.
5. Flash the Latest Magisk to maintain root
6. Reboot System and Enjoy the latest firmware without any data loss
Click to expand...
Click to collapse
I am guessing you skipped the first step...
Try this:
Flash the OTA zip
Reboot (you will be unrooted and with stock recovery)
Boot to TWRP through ADB
Flash magisk unistaller
Reboot
Boot to TWRP through ADB
Flash OTA zip
Flash TWRP
Reboot to TWRP
Flash magisk

Galeanatur said:
https://forum.xda-developers.com/oneplus-6t/how-to/official-oxygenos-9-0-4-ota-oneplus-6t-t3860953
I am guessing you skipped the first step...
Try this:
Flash the OTA zip
Reboot (you will be unrooted and with stock recovery)
Boot to TWRP through ADB
Flash magisk unistaller
Reboot
Boot to TWRP through ADB
Flash OTA zip
Flash TWRP
Reboot to TWRP
Flash magisk
Click to expand...
Click to collapse
I don't have the OTA but the full rom, isn't simplier to update with the full ROM?
I think I'm going to try the null0seven's solution

null0seven said:
Try this:
- in twrp , dirty flash the rom you are using (Oxygen os)
- factory reset
- flash twrp (the latest the better)
- flash Magisk 19.1
Reboot to system.
If this not working, Format data will work.
Click to expand...
Click to collapse
Ok, I've done this and actually is even worse, the device started to boot in recovery again and TWRP doesn't recognize that the internal storage is crypted, so i can't even access the internal storage (it shows only strange folders), so, now I can't flash the nandroid backup anymore.

I also mean FULL rom .zip.
Format data in twrp or in Fastboot. Or use MSM tool .
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
all of them will wipe ALL in youre phone, but it will work.

null0seven said:
I also mean FULL rom .zip.
Format data in twrp or in Fastboot. Or use MSM tool .
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
all of them will wipe ALL in youre phone, but it will work.
Click to expand...
Click to collapse
So I've to Full wipe and then adb sideload the ROM? Because at the current state I can't even boot the device, it always starts in TWRP
Edit: I've also tried the blue_spark's version but nothing changed, TWRP can't recognize the encrypted storage

you can try this first.
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516

fuji97 said:
Hi,
I was updating my OP6T to the new version (Magisk + Xxx NoLimits), but after the reboot post-update the device started to reboot to recovery after it booted. So I've tried to delete Magisk but the problem was still present, so I've decided to download the latest Oxygen ROM from the OnePlus and flash it from TWRP, but after flashing, the device started to always boot to recovery (before the OnePlus boot animation).
At least i tried to restore a nandroid backup of 1 month ago (System, Boot and Data), but still the device after the restore still boot to recovery before the boot animation.
I've only tried the system reboot (I've not tried to force boot another slot).
Do you have a solution to try before formatting the internal storage?
Thanks
Edit: After unistalling magisk and reflashing it again, now the device boots again, but immediately after (when the lock screen appear) the device reboot automatically to recovery again
Click to expand...
Click to collapse
When you're saying you're flashing the full ROM after wiping, are you meaning the xxx no limit? If so this isn't an os rom it's just a magisk module rom that's an add on to oxygen os. You need to wipe and flash the latest oxygen os rom, stable or beta which ever you're using, then flash TWRP, flash your os again on the other slot, flash TWRP, flash magisk, if your system boots fine then flash the xxx no limits rom in twrp.

ebproject said:
When you're saying you're flashing the full ROM after wiping, are you meaning the xxx no limit? If so this isn't an os rom it's just a magisk module rom that's an add on to oxygen os. You need to wipe and flash the latest oxygen os rom, stable or beta which ever you're using, then flash TWRP, flash your os again on the other slot, flash TWRP, flash magisk, if your system boots fine then flash the xxx no limits rom in twrp.
Click to expand...
Click to collapse
No, I flashed the full ROM downloaded from the OnePlus server

Have you tried formatting data?

Cablespider said:
Format data.
Click to expand...
Click to collapse
So, full format data and flash rom + TWRP + Magisk?

fuji97 said:
No, I flashed the full ROM downloaded from the OnePlus server
Click to expand...
Click to collapse
You're best bet is to use the MSM tool
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448

Ok, I've decided to use MSM to recover the device, I've lost the internal storage, but at least the device is working again.
Thank you to everyone who helped me in this thread

fuji97 said:
Ok, I've decided to use MSM to recover the device, I've lost the internal storage, but at least the device is working again.
Thank you to everyone who helped me in this thread
Click to expand...
Click to collapse
Maybe it was a Magisk module that caused it. I removed pixel module from Magisk and it done the same to me.

After update to V11.0.4.0.QFJEUXM TWRP no longer available

Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!

Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP

Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.

Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.

The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine

houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop

hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html

RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:

Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...

I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.

frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?

You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899

RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.

ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so

zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.

RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img

zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.

zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system

frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself

I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...

Xiaomi eu stable installation on Mi9T

Hey!
I want to ask you good people how to properly change my global 11.0.1.0.PFJMIXM to miui 11 stable xiaomi eu (xiaomi.eu_multi_HMK20MI9T_V11.0.6.0.QFJCNXM_v11-10).
My phone is actually encrypted, has antiroll back "1", twrp already installed (twrp-3.3.1-2-davinci-fix).
Lately I've tried:
1. twrp format data, typed "yes"
2. copied rom, installed
3. reboot to recovery, and flashed magisk
and bootlooped...
I also would like to have hasty kernel and try new 82hz dtbo... If you be soo kind, you can suggest me how to do it also.
Thank you

rapids said:
Hey!
I want to ask you good people how to properly change my global 11.0.1.0.PFJMIXM to miui 11 stable xiaomi eu (xiaomi.eu_multi_HMK20MI9T_V11.0.6.0.QFJCNXM_v11-10).
My phone is actually encrypted, has antiroll back "1", twrp already installed (twrp-3.3.1-2-davinci-fix).
Lately I've tried:
1. twrp format data, typed "yes"
2. copied rom, installed
3. reboot to recovery, and flashed magisk
and bootlooped...
I also would like to have hasty kernel and try new 82hz dtbo... If you be soo kind, you can suggest me how to do it also.
Thank you
Click to expand...
Click to collapse
Format data with yes
Reboot to recovery
Flash the rom
Clear cache/dalvik
Don't flash the Magisk right away
Sent from my Mi 9T using XDA Labs

welder73 said:
Format data with yes
Reboot to recovery
Flash the rom
Clear cache/dalvik
Don't flash the Magisk right away
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
okay! soo i'll flash magisk later, after first configuration, and what about hasky kernel and dtbo?

rapids said:
okay! soo i'll flash magisk later, after first configuration, and what about hasky kernel and dtbo?
Click to expand...
Click to collapse
Flash kernel after first setup too...if anything goes wrong, just flash the rom over.
About dtbo, I don't use it, follow the instructions in that thread...
Sent from my Mi 9T using XDA Labs

okay, i managed successfully xiaomi eu stable V11.0.6.0 and magisk.
Now can sombody advice me how exacly should I install "Hasty-davinci-Intoxicated-r3" and "VendorOverclockPackV2" (from topic: https://forum.xda-developers.com/mi-9t/themes/screen-overclock-mode-t4079693/page33 )
to get more then 66hz refresh rate?
Oh, and my phone is now actually encrypted...
I know it's something like:
1. mount vendor if isnt
2. backup boot, dtbo and vendor
3. flash VendorOverclock V2.img (without reboot)
4. install hasty kernel (without reboot)
5. flash oc dtbo file (without reboot)
6. install magisk (without reboot)
would it be ok?