Related
Hi. Before the latest PA ROM update (may 13), I had my launcher working great at 720p 160 DPI. When I use these settings now, I get huge gaps between the rows. Help?
Thanks
vSTATERv said:
Hi. Before the latest PA ROM update (may 13), I had my launcher working great at 720p 160 DPI. When I use these settings now, I get huge gaps between the rows. Help?
Thanks
Click to expand...
Click to collapse
You might try the appropriate thread in development (albeit the 5th of May version) here or use Google+ to report this issue.
Other than that I can only recommend going back to a build that did work for you. You're using bleeding edge versions, so expect issues, bugs, and virtual nuts and bolts flying around at times.
Rhian said:
You might try the appropriate thread in development (albeit the 5th of May version) here or use Google+ to report this issue.
Other than that I can only recommend going back to a build that did work for you. You're using bleeding edge versions, so expect issues, bugs, and virtual nuts and bolts flying around at times.
Click to expand...
Click to collapse
Actually, neither the development thread nor Google+ is the appropriate venue. There exists a thread right here in the Q&A forum for AOSPA help, and the official bug tracker is at colormeparanoid.com.
Like you said, the OP should expect issues as he's flashed an alpha version of the rom. From the tenor of the post, it seems that it may have also been a dirty flash. If so, they a clean flash should be attempted prior to considering this a bug.
So where can I find a stable version of the ROM?
You have a few options on how to proceed. You can try a clean install to see if the problem was caused by dirty flashing, you can use a third party launcher such as Apex, or you could go back to an older release such as 3.15, http://tinyw.in/xQxR
The screenshot I attached shows the problem - gaps between the rows. Anyone else got this? I've flahsed newer PA versions with the same problem on each.
Since I rolled back to the 3.15 version it has come back to normal. But this isn't the solution ; I don't want to be stuck on an old version.
This is just a heads-up about a 7.1.2 Rom by Anderson Mendes. Saw it somewhere and downloaded it, works very well. You need to flash a zip called motoactionfix with the Rom. Latest beta SuperSu works, as does 7.1 Gapps.
Rom
https://www.androidfilehost.com/?fid=817550096634759986
Motoactionfix
https://www.androidfilehost.com/?fid=457095661767151817
well, but I get a configuration error on the start screen ...... what happend.... I flashed the pico gaaps
Yes. Its working well. I am using it from 2 days. Only one random reboot initially after installing. Till now all basic things working.
Installing ROM and gapps together gives setup widget fc.
But Flashing ROM, reboot, flash gapps works fine.
Installed it, works really well.
Was able to install Substratum with 7.1.1 Themes.
THANKS!
You CAN'T' post any DU roms on XDA. Ffs, take this down.
Pulse not working properly & equalizer too..
here guys dirty 11.3 for titan motoaction bug is fixed in this version
https://www.androidfilehost.com/?fid=673368273298946068
evandro_stan said:
You CAN'T' post any DU roms on XDA. Ffs, take this down.
Click to expand...
Click to collapse
That's not actually true. An "Urban Myth" perhaps.
Any bugs?
Well the only bug, and it seem to be common on AOSP roms, is that the Navbar Editor is listed in Settings but it can't be invoked.
Anyone know a workaround to change the order of the navbar buttons?
Same error
rickseth said:
well, but I get a configuration error on the start screen ...... what happend.... I flashed the pico gaaps
Click to expand...
Click to collapse
I flash ROM + gapps + zipmoto and get eroor .. I flash 11.3 if not return to lineageos )
Till get fixed only replace SetupWizzard after flashing gapps & don't forget give permissions
I didn't get any problems with 11.2 , used without gapps.
Today I've installed 11.3 build made by @Kranoner, In this I didn't have apns , I've created manually but I get 2G connection only.
Pulse doesn't show up with poweramp .
Flash Rom + Supersu
Boot
Boot to Recovery, flash GApps
raj_45 said:
I didn't get any problems with 11.2 , used without gapps.
Today I've installed 11.3 build made by @Kranoner, In this I didn't have apns , I've created manually but I get 2G connection only.
Pulse doesn't show up with poweramp .
Click to expand...
Click to collapse
i build this blind also i cant test it or fix any bug i use dirtyunicorns 11.3 of my pixel and my mi 5 and i have no bugs sorry for your guys but buy a new phone this solved alot of bugs then in the future i dont think any one will bring new stuff for moto g 2014 its to old and 1 gb ram is to low and the kernel version is horror 3.4.xxx all good feats come in kernel version 3.10 and up
Kranoner said:
i build this blind also i cant test it or fix any bug i use dirtyunicorns 11.3 of my pixel and my mi 5 and i have no bugs sorry for your guys but buy a new phone this solved alot of bugs then in the future i dont think any one will bring new stuff for moto g 2014 its to old and 1 gb ram is to low and the kernel version is horror 3.4.xxx all good feats come in kernel version 3.10 and up
Click to expand...
Click to collapse
Thank u for making this , even without having device in hand
I have only problems
1.
2.I don't get voice from earpiece when making call after unplugging charger, to get voice I have reboot.
raj_45 said:
Thank u for making this , even without having device in hand
I have only problems
1.
2.I don't get voice from earpiece when making call after unplugging charger, to get voice I have reboot.
Click to expand...
Click to collapse
This also happened with me even old builds. I need to switch to other 7.1.2 coz of this issue.
Still great ROM. Many thanks @Kranoner
Hi guys, any hope for a new update to 11.4 or 11.5?
can it be used for moto g falcon as both models are almost same????
SHIVAM1198 said:
can it be used for moto g falcon as both models are almost same????
Click to expand...
Click to collapse
No
hello everyone.
i have tried a few custom roms on my samsung galaxy grand prime sm-g530H and discovered the rom that works best with it for me is this version of resurrection remix - https://forum.xda-developers.com/gr...om-resurrection-remix-n-5-8-3-galaxy-t3596669.
the problem is its preloaded with magisk management. even after uninstalling magisk through twrp, i am not able to run some important indian apps (eg - m-adhaar) because they still detect my phone as rooted. i have already tried unrooting but that didnt work. magisk is not able to hide root from some apps that i need through magisk hide and other methods i have read about on this site either.
can some kind soul please provide me a link of a root-free rom of resurrection remix or regular lineage os? preferably android version 7 and/or 8? thank you in advance.
my phone specs :-
samsung galaxy grand prime
sm-g530h - A.P - XXS2BRLI
CP - XXU2BPB2
MSM - 8916
p.s - i changed the update script in the roms to install from boot without magisk but of course it still installs the magisk management.:cyclops:
also - magisk hide is not working for one particular app- https://play.google.com/store/apps/details?id=in.gov.uidai.mAadhaarPlus
HI,
These Apps have problem with the custom rom too ( normally) and they are able to recognize the custom rom in both case. It doesn't matter rom is rooted or not.
So You have to hide this thing with Magisk or ... .
Is your magisk passed the safety net test successfully?
If it passed then I can't help you anymore and if not try this one:
https://forum.xda-developers.com/gr...om-lineageos-17-0-galaxy-grand-prime-t4034919
yes
Feoder said:
HI,
These Apps have problem with the custom rom too ( normally) and they are able to recognize the custom rom in both case. It doesn't matter rom is rooted or not.
So You have to hide this thing with Magisk or ... .
Is your magisk passed the safety net test successfully?
If it passed then I can't help you anymore and if not try this one:
https://forum.xda-developers.com/gr...om-lineageos-17-0-galaxy-grand-prime-t4034919
Click to expand...
Click to collapse
actuall yes. thats the last rom i tried. but its not stable on my phone. display keeps turning off and phone becomes laggy too. which is why i have mentioned that i need version 7 or 8 n particular.
as for your mention of these apps having problems with custom roms, i am not sure if thats entirely correct or not because i have tried other roms which are fine with the apps but not stable for my phone in particular. so theres my dilemma.
as for magisk test...yes. it passes but hiding is not working in 1 particular app. also my requirement is non magisk and/or non superuser preinstalled rom if i can find one. maybe you could help me with that? as long as the version is 7 or 8.1? coz 9 and 10 are not running properly on my phone ( lags). i am kind of limited in using internet for a couple of days...so its hard to thoroughly search for one. which is why this thread.t hank you for your reply and help
maxdesolate said:
which is why i have mentioned that i need version 7 or 8 n particular.
Click to expand...
Click to collapse
https://forum.xda-developers.com/gr...fficial-galaxy-grand-prime-g530h-xcu-t3765599
I tried a few Oreo based custom roms and this is the only stable rom that I found in internet . Which is a really great rom but it doesn't work for you because Rom will be rooted during the installation by Magisk 16.3.
I don't have any informations about 7, If You have Telegram Account , There is a Grand Prime 530 group. May be you can get a better help there about Android 7.
GP link: https://t.me/grandprimedev
Feoder said:
https://forum.xda-developers.com/gr...fficial-galaxy-grand-prime-g530h-xcu-t3765599
I tried a few Oreo based custom roms and this is the only stable rom that I found in internet . Which is a really great rom but it doesn't work for you because Rom will be rooted during the installation by Magisk 16.3.
I don't have any informations about 7, If You have Telegram Account , There is a Grand Prime 530 group. May be you can get a better help there about Android 7.
GP link: https://t.me/grandprimedev
Click to expand...
Click to collapse
thanks a bunch bro. i have tried this already though. along with magisk, it has some issues like powering off instead of restarting and a little bit of heating - at least on my phone - if i remember right. anyway i will check out the group after creating an account on telegram. only 1.5gb of usage left today on my phone. thanks again. much appreciate it. :angel:
try this one:
https://forum.xda-developers.com/gr...om-lineageos-17-0-galaxy-grand-prime-t4034919[/QUOTE]
hi bro.
after a lot of frustration, i tried this one again with bitgapps. turns out that the other versions of gapps were making it lag. its running nicely on my phone. it didnt have magisk installed or supersu for that matter. but some apps still showing that 'you are on a rooted device' or' you are using a custom rom' msg.
so i installed magisk again only to be able to surpass detction for the one particular app i needed and it worked ( yippy!). but other apps, for eg - whatsapp etc still detect the device as custom rom or rooted. so i am still looking for a way around it.
also particular rom shows the msg on startup saying -' there is an internal problem with your device. contact your manufacturer etc. am just ignoring the pop up msg for now.
the rom ( which is android version 10 ) is running surprisingly smooth and fast though.
i wish there was a way to get rid of that msg and unroot the device completely ( doing it through superuser pro and magisk unintsallation - with uninstaller zip and through manager didnt work).
so well, there it is.
As do i
maxdesolate said:
also particular rom shows the msg on startup saying -' there is an internal problem with your device. contact your manufacturer etc. am just ignoring the pop up msg for now.
Click to expand...
Click to collapse
I saw it on most Android Pie and Q custom roms which i tried. I think it's something about kernel or Rom. There is a video on YouTube about this issue, He solve it for an Asus phone which didn't work for me.
For the record, did you hide Magisk manager and chose a nick name for it before hide root from other apps with it?
yup. i did.
Feoder said:
I saw it on most Android Pie and Q custom roms which i tried. I think it's something about kernel or Rom. There is a video on YouTube about this issue, He solve it for an Asus phone which didn't work for me.
For the record, did you hide Magisk manager and chose a nick name for it before hide root from other apps with it?
Click to expand...
Click to collapse
i did hide magisk and gave it another name and checked all apps to be hidden in the hide list.
this video you mention, is it the one where he sets ro.treble to false from true? if yes, then i downloaded build prop but my ro.treble was already set to false by default. i was really hoping that would work. lol. alas! let me know bro.:good:
maxdesolate said:
this video you mention, is it the one where he sets ro.treble to false from true?
Click to expand...
Click to collapse
Yes
I don't know this is useful for you or not . By the way it's an other stable custom rom . ( Oreo based ) with 2 small bug but on safety test, CTS profile result was false for me.
https://forum.xda-developers.com/grand-prime/development/rom-dotos-2-2-t3791808
maxdesolate said:
i did hide magisk and gave it another name and checked all apps to be hidden in the hide list.
this video you mention, is it the one where he sets ro.treble to false from true? if yes, then i downloaded build prop but my ro.treble was already set to false by default. i was really hoping that would work. lol. alas! let me know bro.:good:
Click to expand...
Click to collapse
Feoder said:
I saw it on most Android Pie and Q custom roms which i tried. I think it's something about kernel or Rom. There is a video on YouTube about this issue, He solve it for an Asus phone which didn't work for me.
For the record, did you hide Magisk manager and chose a nick name for it before hide root from other apps with it?
Click to expand...
Click to collapse
I just realized that my phone model is fortunave3g not fortuna3g . It is a long story that why I made this mistake but since there is no official Twrp for fortunave3g I installed the Pitch Black Recovery for fortunave3g then I flashed a Lineage 17.1 for fortunave3g with it. now everything is fine and I don't see the internal problem's notification any more . Also I should thanks itexpert.120 for helping and his custom recovery.
should i try pitch black ?
Feoder said:
I just realized that my phone model is fortunave3g not fortuna3g . It is a long story that why I made this mistake but since there is no official Twrp for fortunave3g I installed the Pitch Black Recovery for fortunave3g then I flashed a Lineage 17.1 for fortunave3g with it. now everything is fine and I don't see the internal problem's notification any more . Also I should thanks itexpert.120 for helping and his custom recovery.
Click to expand...
Click to collapse
ah, i see. i used to get error 7 on the latest twrp even after editng the updater script. so i switched to twrp version 3.2.x. then there were no errors while flashing any roms. do you think changing the twrp version or doing it again through pitch black recovery might solve the issue for me? also, please tell me if pitch black is as good as twrp in backing up and restoring. coz i have had to do that a lot. zeeshan(itexpert.120) told me to just ignore the error. hehe. but i cant do that!:cyclops: let me know bro.
maxdesolate said:
ah, i see. i used to get error 7 on the latest twrp even after editng the updater script. so i switched to twrp version 3.2.x. then there were no errors while flashing any roms. do you think changing the twrp version or doing it again through pitch black recovery might solve the issue for me? also, please tell me if pitch black is as good as twrp in backing up and restoring. coz i have had to do that a lot. zeeshan(itexpert.120) told me to just ignore the error. hehe. but i cant do that!:cyclops: let me know bro.
Click to expand...
Click to collapse
Actually the main problem was with my rom not custom recovery . But I had to install a correct custom recovery for installing the correct custom rom.
Pitch Black has the same features even more. Actually It based on Twrp.
I can't be sure, but if you've seen Error Seven when you using the Twrp 3.4 , then there is a good chance that you've installed a wrong Custom recovery. on the other hand I had camera problem which seems you don't have it.
Hi.
I don't know why, but information about unofficial release of LOS never have been posted here. If there's some legal issues, just delete my post. I have 18.1 running perfectly on my nitrogen. Maybe this is good moment to revive some of our old big nitrogens
Enjoy. It's really great.
Download and Install Lineage OS 18.1 on Xiaomi Mi Max 3 (Android 11)
In this tutorial, we will show you how to download and install Lineage OS 18.1 on Xiaomi Mi Max 3 (nitrogen) device. The Google-owned
www.getdroidtips.com
Cheers
linus207 said:
Hi.
I don't know why, but information about unofficial release of LOS never have been posted here. If there's some legal issues, just delete my post. I have 18.1 running perfectly on my nitrogen. Maybe this is good moment to revive some of our old big nitrogens
Enjoy. It's really great.
Download and Install Lineage OS 18.1 on Xiaomi Mi Max 3 (Android 11)
In this tutorial, we will show you how to download and install Lineage OS 18.1 on Xiaomi Mi Max 3 (nitrogen) device. The Google-owned
www.getdroidtips.com
Cheers
Click to expand...
Click to collapse
Can't you detect any bug?
It would be good to follow up on its correct operation
Thanks for the info
Voretmv said:
Can't you detect any bug?
It would be good to follow up on its correct operation
Thanks for the info
Click to expand...
Click to collapse
I can't detect any bug. Everything is just great. I highly recommend los. It's way more smooth and battery friendly than miui 12.
Does gcam work?
landsome said:
Does gcam work?
Click to expand...
Click to collapse
It's actually default camera app.
linus207 said:
It's actually default camera app.
Click to expand...
Click to collapse
I've just installed it myself - the latest JoysKo version from 4pda.ru. Have not tested it thoroughly, though. Will report more soon. But...
GCam works. After having tried some two dozen versions (which either stopped immediately or did not install at all), I used MGC_6.2.030_FinalRelease_Bulkin043_V9Q, which is known to work on AOSP-9 based custom roms. I am not entirely sure it's perfect, but the basics work. (One may have to change the saving location, though.)
The only issue so far once fully booted - but I barely tested it - is that I seem to have deep sleep problems with third-party launchers (Nova, Lawnchair 2 etc.); Trebuchet works. It does not seem to be caused by widgets - but I need to explore more.
Another problem is common from AOSP9-based 3rd party roms: sometimes, on rebooting, the phone gets stuck (the "Unlocked" logo phase). A simple restart resolved it.
I have not sorted out passing SafetyNet yet (Magisk props fingerprints are apparently not enough).
Happy to report the terrible scrolling issues plaguing AOSP9-based roms here on XDA are completely absent.
Finally, battery life, even without deep sleep, is very good.
How did you recognized deep sleep issue? I am currently running Lawnchair 2 having 94% deep sleep while screen off.
Maybe it's gapps issue/play services? I am using open gapps test version for 11.
linus207 said:
How did you recognized deep sleep issue? I am currently running Lawnchair 2 having 94% deep sleep while screen off.
Maybe it's gapps issue/play services? I am using open gapps test version for 11.
Click to expand...
Click to collapse
Same gapps here. I use Accu Battery and it reports it. I have the same problem if very unreliable sleep on two other phones using los18.
This thread deserves more views. I happened to try the android 11 based Havoc rom from April 2021 and it runs smooth. Everything works perfectly, and I've been using it as a daily driver for the last week.
Thank you JoysKo!
If anyone can point me how to replace the stock cam with gcam- it would be much appreciated!
Voretmv said:
Congratulations on your work. I have this Rom installed on my Mi Max 3, and I am very happy.
Do you have any evolution of this Rom that I am not aware of?
I currently have Lineage-18.1-FORK-vanilla-20210124-nitrogen-JoysKo installed
Click to expand...
Click to collapse
I tried the more recent versions of LOS uploaded by JoysKo and reverted to 0124. For me, it's the best. With the 2 others I had janky scrolling, malfunctioning gestures.
Vandetta187 said:
This thread deserves more views. I happened to try the android 11 based Havoc rom from April 2021 and it runs smooth. Everything works perfectly, and I've been using it as a daily driver for the last week.
Thank you JoysKo!
If anyone can point me how to replace the stock cam with gcam- it would be much appreciated!
Click to expand...
Click to collapse
With the LOS 20210124, I just installed one of the few working gcams. Specifically 6.2.030 Final Bulkin043 V9Q.
landsome said:
With the LOS 20210124, I just installed one of the few working gcams. Specifically 6.2.030 Final Bulkin043 V9Q.
Click to expand...
Click to collapse
Yeah I tried that one you mentioned however I get app not installed error message.
Is there another version that might work?
Vandetta187 said:
Yeah I tried that one you mentioned however I get app not installed error message.
Is there another version that might work?
Click to expand...
Click to collapse
I tired several that did not. Works for me on Lineage-18.1-FORK-vanilla-20210124-nitrogen-JoysKo, though. (I installed both newer versions of the ROM and as far as I remember it worked on them too - but I replaced them later.)
Thank you so much for this thread. Installing Lineage is like a walk in the park like this. The only problem I come across is when I want to play back videos in some apps or Chrome. I get errors like video can not be played and SOURCE_STREAM_TYPE_NOT_SUPPORTED. I think this might be a firmware issue or is there another solution available?
Hello together
With last Lineage OS 18.1 fork-vanilla I've problems with loosing fingerprints after a while and GBoard-function with full NikiGapps is buggy.
Now I'm back to preversion and fingerprint problems are solved. Only changing to GBoard was not so good idea
linus207 said:
Hi.
I don't know why, but information about unofficial release of LOS never have been posted here. If there's some legal issues, just delete my post. I have 18.1 running perfectly on my nitrogen. Maybe this is good moment to revive some of our old big nitrogens
Enjoy. It's really great.
Download and Install Lineage OS 18.1 on Xiaomi Mi Max 3 (Android 11)
In this tutorial, we will show you how to download and install Lineage OS 18.1 on Xiaomi Mi Max 3 (nitrogen) device. The Google-owned
www.getdroidtips.com
Cheers
Click to expand...
Click to collapse
I installed arrow and Los but all meet same problem. The message can not be received. Try to install global FW+ vendor at first but Stuck on the boot screen . Any good suggestion?
Hi, I was also very pleased to see Lineage on the Mi Max 3, still using this device due to the large screen I love.
Has anyone exerperienced bluetooth connection issues?
It connects to my speaker and then immediately disconnects and of course then wont play any music?
ROM version I used is lineage-18.1-20210608-nitrogen-experimental-PRGroup.zip
Any known fix as yet?
Previous versions do not have bluetooth issues like this?
Thanks.
dhodson7171 said:
Hi, I was also very pleased to see Lineage on the Mi Max 3, still using this device due to the large screen I love.
Has anyone exerperienced bluetooth connection issues?
It connects to my speaker and then immediately disconnects and of course then wont play any music?
ROM version I used is lineage-18.1-20210608-nitrogen-experimental-PRGroup.zip
Any known fix as yet?
Previous versions do not have bluetooth issues like this?
Thanks.
Click to expand...
Click to collapse
Update on this bluetooth issue....
I have wiped and installed this rom now
Lineage-18.1-FORK-vanilla-20210124-nitrogen-JoysKo.zipall works fine now....
still interested if anyone has a resolution to the BT issue though?
The latest of the latest versions of Lineage 18.1: https://t.me/MiMax3Update/211
Many problems have been fixed in it. It is advisable to install cleanly...
Regard, JoysKo.
P.S.: For DT2W use this module…
JoysKo said:
The latest of the latest versions of Lineage 18.1: https://t.me/MiMax3Update/211
Many problems have been fixed in it. It is advisable to install cleanly...
Regard, JoysKo.
P.S.: For DT2W use this module…
Click to expand...
Click to collapse
Thanks. Got it from Telegram a few days ago. I can confirm it works great. Better than the January version, which was the best before in my view. Do try to install from Orange Fox, however, not TWRP.
Hi,
As of December 2021, is there an alternative ROM that would reliably work for Xiaomi Redmi 4 Prime?
I am asking because the standard MIUI ROM has not been updated for years and I am having quite a few glitches - I think, because of that. For example, Vivaldi browser and Fairemail frequently crash, as well as some other programs.
I am looking for something that would, really, just work, hardware- and software-wise. With no bugs. At least with no serious bugs.
My understanding is that the choice is not wide. Please report if you have tested a ROM that works for Redmi 4 Prime in late 2021. I don't want to throw away this phone.
I'm using the unofficial CrDroid by redispade and it's amazing. Best ROM i've used, everything works just fine except that I couldn't get device encryption working properly but if you don't need it it's a great Android 10 ROM.
Link: https://forum.xda-developers.com/t/rom-unofficial-13-07-2020-crdroid-6-8-10-0-markw.4020259/
sadly there don't seem to be any recent updates/roms for our cool markw
donrevan said:
everything works just fine except that I couldn't get device encryption working properly
Click to expand...
Click to collapse
That's the thing. I need encryption to keep my data safe.
I wonder if Lineage OS has any encryption issues. I read that when the drive is encrypted, you cannot use fingerprint unblocking. Perhaps there are issues with encryption itself, too.
Thanks for the reply though.
In my opinion, actually, the best Rom out there is lineage 17.1, in terms of stability, whole functionality and amazing battery backup, poor about the feature just in line with lineage tradition (just the possibility to reboot or power off in notification panel).
Of course the encryption make problematic the fingerprint recognition, as each interesting cusrom for Markw!
Sorry for my English.
*lineage 17 from @ShihabZzz
autokoise said:
In my opinion, actually, the best Rom out there is lineage 17.1
Click to expand...
Click to collapse
Thanks for the reply. There's already Lineage 18 for Markw, compiled by Shihabzzz. Is there a way to make encryption and fingerprint compatible though?
thumos2 said:
Thanks for the reply. There's already Lineage 18 for Markw, compiled by Shihabzzz. Is there a way to make encryption and fingerprint compatible though?
Click to expand...
Click to collapse
In my experience, nowadays, the 17 is more stable to 18 (every @ShihabZzz works is absolute accurate). You can try also mokee 9 or 10 and i suggest you orange fox recovery, the last one official 10.1 to try encryption (sorry but i never used encryption in my devices!)
autokoise said:
and i suggest you orange fox recovery, the last one official 10.1 to try encryption (sorry but i never used encryption in my devices!)
Click to expand...
Click to collapse
Okay, I see, thanks.
If anyone got encryption properly working with fingerprint, on any ROM, please let me know.
https://github.com/ShihabZzz/Bug_Reports/issues/18#issuecomment-867005556
autokoise said:
https://github.com/ShihabZzz/Bug_Reports/issues/18#issuecomment-867005556
Click to expand...
Click to collapse
Thanks, Autokoise. I have asked to confirm if the bug disappeared in the newer LOS versions.
I am using ported miui rom NSA based on miui eu.I am happy with it.It is android 9.I have no major bugs but I don't use encryption sao I can't tell you nothing about it.I tried many roms.Crdroid ,arrowos ,havoc lineage os bit I prefer ported miui.It is so sad that markw never get official android version update.