Related
Updated 10/22/2014 10:20pm EST - Thread closed see new thread http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/general/cyanogenmod-tab-pro-12-2-sm-t900-t2914991
chhaggerty has now posted his source built cm11 for SM-T900 that has a full OP, why this post no longer is needed. Additionally, his build is the most complete and also runs smoother than its predecessors. However, without the initial work carried out by crpalmer, Valera1978 and bonuzzz this release would not have seen the light until much later, if ever.
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valera1978 and bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Valera1978 said:
cm-11-20141012-UNOFFICIAL-v2wifi
Merge with latest official nigtly 20141012.
Also included new kernel.
https://drive.google.com/file/d/0B-6...ew?usp=sharing
Please test it.
Click to expand...
Click to collapse
Note: the BROWN text contain links to the actual postings
Need help installing the rom
arcadia2uk said:
Updated 10/18/2014 08:40am EST
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valeria1978 and Bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? Bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing Bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a Bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Note: the BROWN text contain links to the actual postings
Click to expand...
Click to collapse
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.
Deslang16 said:
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.
Click to expand...
Click to collapse
I hope that you started by making a backup of your current ROM. Thereafter, I assume you did a factory reset, and also wiped your system.
However, It looks like you are installing gapps before the ROM, it should be the other way around. First ROM, then gapps.
Q&A for [ROM][CM10][CM10.1][CM-10.2][CM-11.0][GT-S7710] Samsung X Cover 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM10][CM10.1][CM-10.2][CM-11.0][GT-S7710] Samsung X Cover 2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Kosh_swe said:
Cm10.2 is all BUT stable! ...
My hardkeys (back/menu/home) stopped working ONLY on flxo/Vanir firmwares, ive tried both cm10.2 (20140204_cm_10.2_skomer-ota-eng.flx, which is supposed to be "rock solid", i dont want nightlies since this phone is going to my gf so im after a stable firmware) but i've also tried latest nightly vanir 4.4 but that got the same bug in it!
...
Click to expand...
Click to collapse
@Kosh_swe, have you found a solution? I also failed to get the Vanir ROM to work and I'd consider the flox CM10.2 ROM. Your post suggest that my radio would be dead in flox, too.
---------- Post added at 12:35 PM ---------- Previous post was at 12:26 PM ----------
Matt64 said:
Hey guys,
I recently compiled flxo CM11.0 rom with STE OMX support (from TeamCanjica).
I've been testing it for a couple of weeks, for me everything seems ok (no reboots, camera working ...)
I didn't test bluetooth hand's free, but it's certainly still broken.
You can download this rom from my dropbox account :
xxx
I'm also trying to compile Ubuntu Touch for S7710, I'll let you know when the rom will be flashable.
Click to expand...
Click to collapse
@Matt64, could you provide a hands-on on how to do the compiling?
Never mind, fixed my radio issue. See http://forum.xda-developers.com/showpost.php?p=56293409&postcount=37
Testing radio issues
Hi to all,
I just tested radio issues on my phone. I was researching, why radio is not working.
Here are results, maybe it will help. Anyway, I have my GT-s7710 for testing and I can do some tests or catch some debug informations if needed.
It seems that problem why radio is not working is located in modem-supervisor process. In original firmware, this process is responsible for uploading firmware into dbx500 platform chip. But in CM, there is no such process.
I am not expert, but it seems to.
I tried to use old modem-supervisor process to make everything working.
Services line from original fw:
Code:
service modem-supervisor /system/bin/modem-supervisor -r -f /dev/dbx500_mloader_fw -i /sys/devices/platform/ab8500-i2c.0/chip_id -c monitor -t 0
but it needs to be changed because /sys/devices/platform/ab8500-i2c.0/chip_id changed to /sys/devices/platform/ab8505-i2c.0/chip_id
Problem is that firmware event for loading firmware is never generated and firmware is not uploaded.
I have some dumps and traces if you need them. Thank you for your work!
Lukas
loneraver said:
I tried it, and got none of the "known" issues. Give it a try. If you get any issues, you can always flash back to stock rom.
Click to expand...
Click to collapse
Your "tested" devices are just headphones, right?
The Problem is not the hearing part - the microphone signals are blocked...
if you have a real headset - please try with that one again and tell me
an idea
The 7580's phone hardware is almost identical to the 7710. The processor in the 7580-higher heights, but the hardware buttons and then there are all of the functions, but it has the 4.2.2 firmware, which allow moving to the SD card. Somehow it should possess to operate from 7710.
I'm Hungarian, sorry if the translation is wrong, happened with google.
Okay so I am having the same problem with HW buttons as many others before me...
http://forum.xda-developers.com/showpost.php?p=51234756&postcount=329
http://forum.xda-developers.com/showpost.php?p=51253847&postcount=333
http://forum.xda-developers.com/showpost.php?p=54973574&postcount=362
Click to expand...
Click to collapse
After clean 1st boot after the installation the buttons are working perfectly, but after reboot (2nd boot) they are not working properly. Only long presses are working (google search by long press of menu button, kill aplication by long press of back button, last apps by long press of home button).
So? There is no such responde on how to fix that..!
DaGrizzly said:
Your "tested" devices are just headphones, right?
The Problem is not the hearing part - the microphone signals are blocked...
Click to expand...
Click to collapse
In my cited post I refer to a previously made post where I listed the devices:
loneraver said:
I tested it with logitech ue9000 and samsung hs2000.
Click to expand...
Click to collapse
Both are real headsets with working mics.
Know it's OT but if it's true it's exiting:
Miui for our phone coming?
http://forum.xda-developers.com/showthread.php?p=58720490
Sent from my GT-S7710 using XDA Free mobile app
Sent from my GT-S7710 using XDA Free mobile app
Try other
this one is very very STABLE :
http://forum.xda-developers.com/showthread.php?t=2689010
XCover 2: BT hands free - Problem fixed yet?
Hey developers,
I was wandering if the BT problem has been fixed for Cyanogenmod Version 10.2 for XCover 2.
BT hands free. Connection/pairing works, but the audio path is broken.
Thanks a lot!
baseband wipe
I can't get Cyanogenmod 10.2 working. Everytime installation wipes my baseband.
When I install the Stock ROM SIM works again - but after flashing CM again also wipes baseband again.
My Installation-Tools:
Odin v3.07
CMW: 20140112_cwm-6.0.4.6_skomer_fixed.tar.md5
CM: 20140204_cm_10.2_skomer-ota-eng.flx.zip
Is there any chance to install the baseband (I think it's inside the modem.bin)?
No network available in Polish Play
I'm installing CM for my father in law on Samsung X Cover 2 and I'm facing problem with no available network.
I've tried CM 11 and CM 10.2 - both are running fast but both doesn't recognize any network operator.
CM11 has additional problem with hanging during shutdown.
I've found that Polish network Play has common problems with radio: like here
https://code.google.com/p/cyanogenmod4milestone/issues/detail?id=510.
But even I'm putting T-Mobile sim card then still phone doesn't recognize (phone is coming from Play but it is unlocked).
When I restored Play stock ROM then it works.
Could anybody help in this?
I cannot point link to logcat because new user limitation - pastebin URL part is rWttd9PH
sk_8x said:
I'm installing CM for my father in law on Samsung X Cover 2 and I'm facing problem with no available network.
I've tried CM 11 and CM 10.2 - both are running fast but both doesn't recognize any network operator.
CM11 has additional problem with hanging during shutdown.
I've found that Polish network Play has common problems with radio: like here
https://code.google.com/p/cyanogenmod4milestone/issues/detail?id=510.
But even I'm putting T-Mobile sim card then still phone doesn't recognize (phone is coming from Play but it is unlocked).
When I restored Play stock ROM then it works.
Could anybody help in this?
I cannot point link to logcat because new user limitation - pastebin URL part is rWttd9PH
Click to expand...
Click to collapse
Forget CM en try Vanir or MIUI these are more up2date. Also CM11 is alpa with camera bug:
First look at: http://forum.xda-developers.com/t/xcover-2
Vanir
Second, I use Vanir 4.4.4 daily. It has some bugs, but not some bugs that makes it unstable. Known issues:
Start/Stop navbar after every restart
Use this solution to fix connection errors after a fresh Flash: http://forum.xda-developers.com/showpost.php?p=60411469&postcount=612
Other small bugs:
2G/3G quick setting and normal settings dont work properly because of absence of LTE
Navigation Ring and immersive mode causes dead touch screen space
DSP manager doesn't work
After using Vanir 4.4.4 I never want to go back! It's that much faster, more free RAM en better battery performance. Because of the better RAM performance, you must kill apps more often else it will drain the battery quicker :silly:.
Best way to Flash with 4.4.4 is to first flash Clockworkmod through ODIN, then do the usual Full Wipe --> Wipe Cache --> Flash Rom --> Flash GAPPS. Here is a video of someone doing these things. P.S. in this video the process is speeded up also reboot can freeze the system (just remove battery after a couple of minutes)
Files
Vanir: https://drive.google.com/file/d/0B7agwkTbiz0pNHZMQlpudkR4NUU/view
GAPPS: https://mega.co.nz/#!kokjzJwT!eqmMam5r5N2kWvtmSMy4QnaHnxvoqhDtr_joSDU5anI
MIUI
Another option is MIUI (used on the the popular Chinese Xiaomo phones). Instead of the Vanir build, this build is still being maintained. But because it's based on Vanir it has most likely has the same bugs. Never tried it because I prefer stock Android.
2nd, the connection error fix for vanir could also work for CM (vanir uses stuff from CM).
Since the development thread is closed by OP request( sad but true ), and personally building a "port" of the ROM, i'm glad to help everybody as i can, with this thread.
It doesn't mean to be a development thread since i only build and implement some changes, but just to share comments, issues( like xposed one ) or just ideas to people who own this device ( CN or ROW ).
As a reminder you can find my builds here: LINK or just use OTA function in ROM.
And a big thanks to @frantisheq and @Electry for the works on CM13, and for the next, CM14.
reserved
Are someone try to flash Vibe Z2 (NON PRO) with this ROM?
don't do it, you will probably brick the phone.
K920/Z2 PRO only
Uploaded new build!
Should have Dec 5 patches, have a nice day
Try to install the latest build together with xposed. There is a boot loop with CM logo...... It seems to me there was such kind of problem......
That should be fixed by cm ? . Will apply the xposed fix in next build.
Thanks to inform me about this!
Tapatalk
updated build, with xposed patch, hoping now works fine
The latest build works fine for me. I installed it with xposed.
Hey @malaga82
I have a strange feeling that the new ROM is worse in performance compared to the previous build. It has way more stutters and sometimes the system UI resets and changes my wallpaper to the stock one. Anyone else facing such issues?
Saamyo said:
Hey @malaga82
I have a strange feeling that the new ROM is worse in performance compared to the previous build. It has way more stutters and sometimes the system UI resets and changes my wallpaper to the stock one. Anyone else facing such issues?
Click to expand...
Click to collapse
Could you please provide more details about this behavior and I try to reproduce it? Now I have not such kind of problem. But I can say that the UI sometimes has strange behavior. For example, the horizontal size of quick settings can be more widely than the size of the screen.
maybe it's something related to CM repo's and they will fix "soon".
give some days to see if they fix anything, i'll provide a new build.
In additional to my previous report I would like to add that the latest build cannot hold loading. At the previous build from 16 Nov I can run at the same time a navigation application and a video registration application. Now I cannot do the same because the device is rebooting due to overheating. I tried to figure out what is going on and found that the high limit of CPU0 temperature is set up to 85 C (it seems to me it is low....) and I cannot change it – try several tuning tools. And it is not only one reboot – there are several reboots….. After its a Bluetooth pairing was lost….. And I can repair a normal work only wipe cache & dalvik through TWRP and pair a Bluetooth once again…..
i'd like to have more feedback if possible.
i'm thinking to try to build with the "old" kernel that have cpu voltage control and other features i included times ago.
atm we are a bit stuck with development.
malaga82 said:
i'd like to have more feedback if possible.
i'm thinking to try to build with the "old" kernel that have cpu voltage control and other features i included times ago.
atm we are a bit stuck with development.
Click to expand...
Click to collapse
What information could I provide to you to help?
i just want to know if someone else have that overheating issue
Could you please prepare a build with "old" kernel? Who does not face the overheating problem can stay on the previous one
Solved games issue.
Hello!
Sorry for my English, I from Russia.
On roms later CM 13 2016.03.07 in file: build.prop, increase the value: dalvik.vm.heapsize= from 512m to 768m. This led to the errors in game Real racing 3 (insufficient free memory, missing textures, game crashes). With value 512m games work fine.
If install Adreno drivers from ROM CM 13 2016.03.07, game Gear.club also work fine. The difference can be noticed immediately after starting the game.
I also sent this message to frantisheq.
Happy new year!
Solved games issue.
Additional information to the previous post.
I was looking the file: default.prop, and the parameter ( dalvik.vm.dex2oat-xmx ) is set to =512m. System parameter ( dalvik.vm.heapsize=768m) overlap kernel parameter. Possible, if rebuild kernel with the value 768m, all be fine? I don't test this.
I don't know if anyone knows about or tested the Carbon ROM build on July, 2017 which I found. Here's the link-
https://get.carbonrom.org/device-mocha.html
Please enlighten me if this is a fake website and fake custom ROM for Mipad(mocha).
it's legit and official site there.
Carbon Rom is Real ..... Not Fake!!!!!!!
I'm using it for past one week . working great
jeswinkumar said:
I'm using it for past one week . working great
Click to expand...
Click to collapse
Can u review the ROM in details?
Like Installation process, Android version, Pros and Cons,Stability, battery life,Performance and smooth operations, etc..
rocky869 said:
Can u review the ROM in details?
Like Installation process, Android version, Pros and Cons,Stability, battery life,Performance and smooth operations, etc..
Click to expand...
Click to collapse
I wouldn't use it yet. It was a test build, there are some broken stuff in it. Official build (built by servers) need some extra work, because the device tree/vendor needs to work without changes to the source code itself. This is not possible with our current trees (highwaystar's work), and so there are some issues with that build. Primarily, the camera is broken, because SELinux is enforcing. I've fixed it my personal builds, but now there are some issues with webview crashing. This is why I refrained from making a thread here. Once it's 100% stable, I will make a thread here.
Feel free to use it but don't complain when you realize some things are broken.
drakonizer said:
I wouldn't use it yet. It was a test build, there are some broken stuff in it. Official build (built by servers) need some extra work, because the device tree/vendor needs to work without changes to the source code itself. This is not possible with our current trees (highwaystar's work), and so there are some issues with that build. Primarily, the camera is broken, because SELinux is enforcing. I've fixed it my personal builds, but now there are some issues with webview crashing. This is why I refrained from making a thread here. Once it's 100% stable, I will make a thread here.
Feel free to use it but don't complain when you realize some things are broken.
Click to expand...
Click to collapse
Thanks for the feedback. I am using BDITA ROM latest version for over 6 months, although on KitKat but its the safest and most stable ROM I found for our MIPAD. Battery life,performance and ROM stability are 3 important things I look for in any ROM and BDITA serves me well.
I will wait more until I find a ROM which can replace BDITA
If this post or just part of it was usefull to you, please give a thank you, it's just one click below this post and encourages authors to keep their threads up to date.
What is this thread for?
To all those wondering what to install on their old Samsung Galaxy S6, abreviated "S6". This thread will tell you what you need to know concerning available ROMS for the Canadian W8 model of the S6.
There are 5 major guests in the Samsung Galaxy S6 Android world:
Versions 5.x.x named Lollipop abreviated "LL"
Versions 6.x.x named Marshmallow abreviated "MM"
Versions 7.x.x named Nougat abreviated "NG"
Versions 8.x.x named Oreo abreviated "O"
Versions 9.x.x named Pie abreviated "P"
Versions 10.x.x named 10 abreviated 10
Basic things you must know:
Stock ROMs which are kept as is with only deknoxed but still stock won't show you much besides keeping your phone as it is with the freedom of installing what you want.
AOSP ROMs are usually the most debloated ones and best ones. LineageOS IS an AOSP based ROM.
Debloated ROMs: There seems to be a lot of different levels of debloating. High, Partial, Light. When using a Custom ROM, you usually want to remove most of the stock stuff and install the things you desire after. But in this ROM world, when debloating, authors often rebloat them with some of their prefered apps and mods. So Debloated ROMs are mainly to say that stock apps were removed.
Kernels are not ROMs, just saying AND, they need to be installed with the PROPER version of the ROM you are installing AND must fit AOSP or Stock because they will not work and you will get bootloop.
Aroma installer which permit to choose options during the ROM's installation. These take soo much space and are huge files to download. They boost the ROM's file size. Of course, you can choose what you want during the install process, but most ROMs are over 1Gb in size which is enormous while a non-aroma file can be way under 700Mb and do the job perfectly.
LL (v5.x.x):
These are just old, your cell phone can handle much more up to date roms AND stock roms are already way passed these versions.
MM (v6.x.x):
If you need well working, functional and complete ROMs, there's a few of these which have been tested and work very well. I'd go back without hesitating if I were not too greedy on later versions,
NG (v7.x.x):
There has been a lot of apps and mods that have been made stable from NG ROMs. A system on this would be considered a good in-the-middle installation. Not too old but not too young. There is also a custom framework app out there permitting some nice handling and modding that is considered stable for this version of Android. BUT, there's a bit BUT here. There is v7.0 and 7.1.x. 7.1.x seem to have audio issues, at least, the AOSP ROMs I tested.
0 (v8.x.x):
OK! I have read sooo many articles concerning battey problems in this ROM and I have also lived the battery problem myself with a custom ROM in this version. Oreo would be the system which crosses the line between old and new, merging from MM and NG to PIE.
P (v9.x.x):
Well, you are now up to date. BUT, We are now going well over S10 models of the Samsung Galaxy nowdays so a ROM in this version working bugfree is a bit of a dream, at least, for now. Problem encountered from these ROMs are audio, camera and wifi. Camera app is just nonesense with very poor audio quality. Users talk about bluetooth audio problems and echos during calls. Frequent application crashes notably when using camera, for example in messenger. BUT, the good is a cleaned up interface with a nice fresh modern feel.
10 (10.x.x):
Please refer to Pie (v9.x.x). Pretty much the same things happen.
I decided to give you a list of ROMS I have tested and believe should still stay alive for those questionning what the best ROM is for your needs or dreams.
Links to my suggested custom ROMs:
LL (5.x.x):
• None (just don't install any of these, too old)
MM (6.x.x): Only one stands out which I used for years and has a very nice position in recommended mods.
• XtreStoLite 3.3.1: https://forum.xda-developers.com/ga...xtrestolite-deodexed-mod-edition-1-0-t3094423
XtreStoLite has made me happy for years. If you want a stable ROM with what the S6 looked like during it's glorious days, that's the ROM to install.
NG (7.x.x): Most of these ROMs seem to be stock ROMs with not so much debloation so huge file sizes and Samsung's connection wizard AND all the Google Apps you did not ask for. I fell on 1 which boasts being HIGHLY debloated.
• OdexLite 4.2: https://forum.xda-developers.com/ga...rom-odexlite-rom-920f-920i-925f-925i-t3550706
If you do not install any of the Samsung or Google apps in the aroma installer, this is a highly debloated rom. I'm mentionning it here because I managed to instal it once but not a second time. Some users have reported a boot loop which makes the ROM below pretty much safe for install compared to this one. Because of a first successfull try, I still list it here, but I suggest Ultimate Nougat below. If you want to try and have time, then I suggest to try OdexLite if you are willing to test out and see for yourself.
• UlTiMaTe NouGat V3.1:https://forum.xda-developers.com/ga...elopment/rom-ultimate-nougat-s8-port-t3681259
I managed to make it work after wating for about 15 minutes for my phone to boot initially. It is not as much debloated as OdexLite but is a bit more flexible for adblock and Magisk since you are offered to install or not in the Aroma Installer. This actually is a flaw I found in OdexLite where some applications detect Magisk and AdBlock so they make certain options unavailable. With this version, you can install AdBlock and Magisk after and get apps to work flawlessly. System is stable and a good solution if you want, what I consider, a semi-debloated acceptable ROM. Many users also mentioned that mobile and LTE networks work flawlessly with this ROM.
O (8.x.x): None (I just di not try any of them after my battery problem)
P (9.x.x): 2 Came out of the lot and work strait out of the box. OK, WORK is a big word here, be prepared for a few issues. BUT, battery life is good, not too many apps and some fun customized options.
• LineageOS 16.0: https://forum.xda-developers.com/ga...opment/rom-unofficial-lineageos-16-0-t3880888
Used it for a few months without major issues besides the common Pie ROM issues notably camera and audio issues and some WiFi problems.
• ViperOS 6.3: https://forum.xda-developers.com/ga...elopment/rom-unofficial-viperos-v6-3-t3921301
I was pretty surprised by this ROM. It's basically Lineage OS 16 with extra Viper mods for extra customizations and configuration with, as a user stated, the extra no audio during calls problem. I still consider the Viper addons as bloatware but at least, there's no Samsung apps.
10 (10.x.x): I stopped at Pie. Same issues when reading the ROM threads so I have not even tried any of them because I overuse camera and video calls, who doesn't during COVID-19?
Recommended and usefull apps:
AdAway: https://f-droid.org/packages/org.adaway/
Removes many inapp ads, not those in full screen, but removes lotsand most of them.
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Adds root access to your apps if you don't have it pre-enabled in your ROM
OpenGApps: https://opengapps.org/
Installs Google Play and other Google stuff on your phone
Xposed Framework: https://forum.xda-developers.com/showthread.php?p=58828974#post58828974
Adds numourous other possibilities to customize your phone. NOTE: Please allow an extra boot time after installation.
Xposed Modules: https://forum.xda-developers.com/xposed/modules
Launchers and other apps:
Launchers will give more style to your phone. From changing icon size to drawer's background color, you may want to have a look at launchers for a more customized experience. 2 Launchers held my attention. There's not too many out there that are worth the download even with an above 4/5 star rating. Some of them even show ads which is ridiculous for a launcher as you will see ads popup just in the middle of nowhere.
Microsoft Launcher: My prefered launcher. Has everything you need, notifiction dots, decent customizations and works with icon packs. It lacks a few customizations such as folder colors and opacity, but that left asside, I still think it is the best out of all of them considering that it is totally FREE.
Nova Launcher: The only problem with THIS launcher is that you need the paid version to enable notification badges on your icons.
Evie Launcher: Well it's one or the other, Nova permits lots of customizations with background colors but no badges. Evie permits badges but no background colors or status bar customizations. But, very fast and simple.
MX Player: I've tested a few, one of the best. Reads almost anything, fast and highly customizable. Some may say VLC would be nice but VLC showed a few lags here and there and ended up not reading some files MX read OR had more time with videos accros the network, MX Player does a very nice job.
Options you may want to change:
Enable programmer's options and disable all animations for a faster response time in apps.
Enable USB Debugging and set USB mode to File Transfer or Media Transfer Protocol.
Final Notes: I love the Pie experience but I had to resigne and go back to Nougat for stability and the camera which I use very often. It took me a while to find a reasonable Nougat ROM because I was going to resigne and go back to XtreStoLite. If you plan on testing, Facebook and Google accounts are your best friends to save your stuff so you don't need to restart your games or retype your contacts.
The chosen one: ULTIMATE NOUGAT
I hope this will help people make a choice on what to install for Canadian W8 phones. Do not hesitate to post your comments on your experiences and if you have suggestions or more information on tests you did with other ROMs not mentionned here.
Additional Bloatware you may not need
Now this is for modders who may come upon some bloatwares installed. When installing Ultimate Nougat, I decided to uninstall apps I do not use and found combersome and irritating for me. Here is the list of package names that can be removed which include App Lock, Weather and other widgets. If you are not sure of what you are doing, please do a Google Search on the package names to make sure you are uninstalling something you really do not need. In my case, I chose to uninstall these packages. You may want to get a package name virwer to know where these have been installed to remove them.
I use Total Commander with root permissions and I delete them. When I delete these packages, the phone boots properly and I get no messages or service stopping errors so I consider this my safe to remove list.
List of packages that I removed in the "system" folder (you need root permissions or use TWRP to delete):
Spoiler: KNOX
app/KNOXStub
app/KNOXStore
app/KnoxAttestationAgent
app/KNOXAgent
app/KLMSAgent
app/ContainerAgent
app/ContainerEventsRelayManager
app/KnoxFolderContainer2
app/KnoxRemoteContentsProvider
app/KnoxAppsUpdateAgent
app/KnoxFolderContainer
app/KnoxSetupWizardClient
app/KnoxSwitcher
app/MyKNOXSetupWizard
app/KnoxMigrationAgent
app/KnoxSetupWizardStub
app/SamsungDLPService
app/BBCAgent
app/SecurityLogAgent
priv-app/MyKNOXSetupWizard
priv-app/KLMSAgent
priv-app/SPDClient
priv-app/SKMSAgent
container
tima_measurement_info
framework/knoxsdk.jar
framework/knoxvpnuidtag.jar
etc/secure_storage/com.sec.knox.store
etc/secure_storage/com.sec.knox.store!dex
Spoiler: AUDIO
media\audio\ringtones\A_Rustling_in_the_Trees.ogg
media\audio\ringtones\Basic_Bell.ogg
media\audio\ringtones\Basic_Tone.ogg
media\audio\ringtones\Beep_Once.ogg
media\audio\ringtones\Beginning.ogg
media\audio\ringtones\Bunny_Hopping.ogg
media\audio\ringtones\Chimes.ogg
media\audio\ringtones\Crossing_a_River.ogg
media\audio\ringtones\Dance_Party.ogg
media\audio\ringtones\Day_by_Day.ogg
media\audio\ringtones\Drifting_Downstream.ogg
media\audio\ringtones\Ecliptic.ogg
media\audio\ringtones\First_Light.ogg
media\audio\ringtones\Fresh_Morning.ogg
media\audio\ringtones\Mystic_Tone.ogg
media\audio\ringtones\Ocean_Voyage.ogg
media\audio\ringtones\One_Step_Forward.ogg
media\audio\ringtones\Prelude.ogg
media\audio\ringtones\Scampering_Tone.ogg
media\audio\ringtones\Somewhere.ogg
media\audio\ringtones\Ticktac.ogg
media\audio\ringtones\Warm_Greetings.ogg
media\audio\notifications\Beep_Once.ogg
media\audio\notifications\Good_Time.ogg
media\audio\notifications\Run.ogg
media\audio\notifications\S_Harmonics.ogg
media\audio\notifications\S_Opener.ogg
media\audio\notifications\S_Temple_Bell.ogg
media\audio\notifications\Sweet_Favour.ogg
media\audio\notifications\Whisper.ogg
media\audio\notifications\Hello.ogg
media\audio\notifications\Peanut.ogg
media\audio\notifications\S_Bubbles.ogg
media\audio\notifications\S_Charming_Bell.ogg
media\audio\notifications\S_Dew_drops.ogg
media\audio\notifications\S_Knock.ogg
media\audio\notifications\S_Tickety_Tock.ogg
Spoiler: SAMSUNG
app/SamsungSans
app/VirtualTour_N_OS
app/VideoTrimmer_Dream
app/VideoEditorLite_Dream_N
app/VideoCollage_Grace_N
app/SlowMotion_Dream_N
app/EasterEgg
app/EasyOneHand3
app/GameOptimizer
app/WallpaperBackup
app/Weather2017_SE
app/WeatherWidget2017_SE
app/SmartRemote_zero
app/SmartSwitchAgent
app/SecFactoryPhoneTest
app/SecurityProviderSEC
app/STalkback
app/OneNote_Compact_Samsung
app/GearManagerStub
app/SecMemo3
app/AllshareFileShare
app/AllshareMediaShare
app/SBrowser_5.0
app/SPrintSpooler7
app/CloudGateway2017
priv-app/DiagMonAgent
priv-app/GalaxyAppsWidget_Phone
priv-app/SamsungPayStub
priv-app/SamsungBilling
priv-app/GalaxyApps_3xh
priv-app/GalaxyCare
priv-app/GalaxyThemes
priv-app/PowerPoint_SamsungStub
priv-app/SamsungAccount_Dream
priv-app/SamsungCloud
priv-app/HealthService
priv-app/LegacySmartManagerProvider
priv-app/SamsungPass_1.1
priv-app/VoiceNote_5.0
priv-app/Word_SamsungStub
priv-app/ThemeCenter
priv-app/SecLiveWallpapersPicker
priv-app/SHealth5
priv-app/SmartManager_v5
priv-app/SmartManager_v5_DeviceSecurity
priv-app/EasyLauncher2_Zero
priv-app/SVoicePLM
priv-app/SVoiceLang_EnglishPack_US_1.0
priv-app/SVoiceLang_FrenchPack_1.0
priv-app/SamsungMagnifier3
priv-app/SecEmail_N
priv-app/SecureFolderStub
priv-app/EasySetup
priv-app/GameHome
priv-app/GameTools
priv-app/OneDrive_Samsung_v2
etc/sysconfig/samsungaccount.xml
etc/sysconfig/samsungauthframework.xml
etc/sysconfig/samsungemail.xml
etc/sysconfig/samsungfidouafasm.xml
etc/sysconfig/samsungfidouafclient.xml
etc/sysconfig/samsungpushservice.xml
framework/gamemanager.jar
I just picked up a used SM-G920W8 as a backup until I get my Pixel 2 XL back. I plan to keep it as a backup phone but also as a music player for around the house, on trips and at the gym. The battery life is pretty poor!
I was hoping to put a custom ROM and was wondering if you'd be able to give me some guidance. So many posts on this forum are from 3 years ago and I'm not sure what is valid anymore. After seeing your post, and thank you, I would suspect you have a good deal of experience with this Canadian version of the S6.
My questions are:
What is the process to get TWRP on my device?
Can any of the other ROMs you tried but didn't run be made to work if we flash a custom kernel after flashing the ROM?
In your OP the problems you say you have, are those with your current Unofficial Lineage ROM? I'd hate to have the camera issues.
Thanks in advance.
Installing TWRP with ODIN
blyndfyre said:
I just picked up a used SM-G920W8 as a backup until I get my Pixel 2 XL back. I plan to keep it as a backup phone but also as a music player for around the house, on trips and at the gym. The battery life is pretty poor!
I was hoping to put a custom ROM and was wondering if you'd be able to give me some guidance. So many posts on this forum are from 3 years ago and I'm not sure what is valid anymore. After seeing your post, and thank you, I would suspect you have a good deal of experience with this Canadian version of the S6.
My questions are:
What is the process to get TWRP on my device?
Can any of the other ROMs you tried but didn't run be made to work if we flash a custom kernel after flashing the ROM?
In your OP the problems you say you have, are those with your current Unofficial Lineage ROM? I'd hate to have the camera issues.
Thanks in advance.
Click to expand...
Click to collapse
A simple Google search makes it easy to find but, having a thread like this one , I believe that your questions are relevant. So...
Question #1 (getting TWRP on your phone): 2 links to start with ODIN to make the flash and TWRP, the thing you need to install:
ODIN (remove spaces in the following link): ww w.droid views.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
TWRP: https://twrp.me/samsung/samsunggalaxys6.html
Follow the instructions on the ODIN website. ODIN is used to flash your phone to have TWRP installed. Also note that this process is pretty critical as it can brick your phone so be carefull and follow the instruction properly. I have flashed TWRP a few times without any problems on my side.
Question #2 (Installing a custom kernel):
I have not tried this and did not adventure myself into installing any such thing. I tend to stick with original stuff to make sure to not brick my phone. AND seeing that many custom ROMS for Pie are not out yet and also seeing the battery problem with OREO, this simply means that noone has ever found anything stable yet for this device. I don't believe that installing another kernel may make things work better. But this is just an opinion and since I did not try any custom kernel, I don't believe to have the best answer for you concerning this.
Question #3 (Camera issues with custom ROM):
Samsung Galaxy S6 is made to work with Marshmallow abreviated as MM in certain threads and posts. So anything after MM is a risk, stable or not. I had XtreStoLite for many years and I had absolutely no problems until some apps just said that MM was not supported anymore. That's pretty much the only reason I decided to install something new. I also noticed that Nougat is still very popular but have not found any Nougat ROMS that were not too heavy or simply unavailable for my Canadian phone. But, if you install any MM ROMS, your are mostly not going to have any problems. You could try OREO roms and fall in luck and find someone that figured out how to elliminate the battery issue but in my case, I tend to stick myself to the latest ROMS and live temporarly with my problems until an update fixes it as I don't have too much stuff on my phone that makes me take the reinstallation as a waste of time. I can install over 15 custom ROMS in one day while only 3 or 4 Windows during the same period, I believe that trial and error in this case is worth it. There are few stable builds that correspond to my criterias which are very few custom apps and lightweight that are less than 650 mb ROMS. Most roms go over 2 Gb while som maintain between 1.2 to 1.7 gb which I find pretty huge to my opinion seeing I can get a fully working rom for 550 mb.
I hope this helps a bit. I'm not one of those geeky people with all the technological knowledge to explain or understand the nuances of kernels and roms. I'm not a developper nor a ROM creator myself so just following the installation processes proposed makes me a simple user. I applaud those creating custom kernels and roms from scratch with nothing but their knowledge without any installation instructions until they figure out by themselves how to explain their procedures, these people are the real fun guys or girls that make us use our phone to their outmost potential without any controls giving us the freedom to use the full unlimited functionalities of our android phones.
Just so you are aware the Canadian s6 is the same as the T-Mobile version, so any separate Rom download or fixes for the T-Mobile s6 apply. Any Oreo or Pie rom will have custom kernel prepackaged, as Samsung never released those on this device.
@Rouwdyboy Well that's a very constructive comment. Thank you, this may open up some possibilities and other tests on my side once I get some time again. Thank you for your comment!
@green3water5 how did you get a Canadian S6 to work? Wow!
Other than my S6 being edge, my SM-G925W8 installs LineageOS 16.1 fine but there is no cellular data at all. Calls go through but there's no sound...
I have a suspicion that the installer installs the zeroltexx version of the ROM which is causing the issue.
I guess the only thing that can differ from my installation to yours is Twrp, so which version of Twrp do you use?
Thanks (in advance)
Jeffreyyou said:
@green3water5 how did you get a Canadian S6 to work? Wow!
Other than my S6 being edge, my SM-G925W8 installs LineageOS 16.1 fine but there is no cellular data at all. Calls go through but there's no sound...
I have a suspicion that the installer installs the zeroltexx version of the ROM which is causing the issue.
I guess the only thing that can differ from my installation to yours is Twrp, so which version of Twrp do you use?
Thanks (in advance)
Click to expand...
Click to collapse
I have to admit that I do not use my cell phone using cellular data. I constantly need wifi to use GS Wave for VoIP calls. I have not tested cellular data but I do know that MOST Pie ROMS have sound issues and some Nougat ROMS also. The sound issue is pretty redundant but in my case, using GS Wave, I do not encounter those bugs. The only problem I encounter, I have already mentionned above, BUT, I have updated my first post to warn people of possible sound problems when using cellular data. I'm sorry that I'm not of big use for your problem but thank you for your reply!
I have updated my tests and added my point of view on ViperOS.
Calls
I have no sound in phone calls, everything else is working fine.
i tried to see if there was something like "persist.vendor.audio.fluence.voicecall=true" in the build prop to edit, hoping to fix the issue.
After testing out and other numourouse trials and errors. Here's my new comments on ROMs for G920W8 models. Hope this helps. I rewrote the entire thread content for clearer explanations.
Jeffreyyou said:
@green3water5 how did you get a Canadian S6 to work? Wow!
Other than my S6 being edge, my SM-G925W8 installs LineageOS 16.1 fine but there is no cellular data at all. Calls go through but there's no sound...
I have a suspicion that the installer installs the zeroltexx version of the ROM which is causing the issue.
I guess the only thing that can differ from my installation to yours is Twrp, so which version of Twrp do you use?
Thanks (in advance)
Click to expand...
Click to collapse
I have the exact same problem as you do. I tried many roms and so far, none kept the data ON execpt Resurrection Remix 7 (zerofltecan) for about... 3 hours.
But, when I go back to stock, mobile data comes back.
@green3water5 I sent you a private message AND THEN found that thread. Sorry to have bothered you, will keep writing in here
coolmat said:
I have the exact same problem as you do. I tried many roms and so far, none kept the data ON execpt Resurrection Remix 7 (zerofltecan) for about... 3 hours.
But, when I go back to stock, mobile data comes back.
@green3water5 I sent you a private message AND THEN found that thread. Sorry to have bothered you, will keep writing in here
Click to expand...
Click to collapse
That's why I chose to use OdexLite which is a Nougat based ROM. Oreo and Pie seem to be too recent to have perfect functionalities seeing that S6 is way outdated today. So seeing Pie ROMS work seems, for now at least, a bit more dreamy than reality. Nougat has passed pretty much all possible tests and seeing most of them being abandonned by their authors, I think that most problems may have been resolved and that other issues which may raise are probably corrected with Oreo and Pie ROMs. But again, I do not use cellular lines as I use voip through wifi connections so I cannot suggest anything more than my experience as a computer technician concerning roms and softwares installed on old systems. We are now at the S10 phone, 4 versions higher with Pie starting to be the default system sold on recent phones.
My experience so far with OdexLite without cellular data: I have nothing but good to say. I've had no camera issues, no sound issues, no wifi issues and no problems installing anything I wanted. Up to now, it's the best and most stable ROM I've installed after XtreStoLite. Of course there are small things that I liked in Pie like theme changes and some keyboard changes but nothing compared to how fluid and stable the system is compared to Oreo and Pie ROMs I had tested.
And I am not bothered by any messages. Thank you for your usefull comment.
green3water5 said:
That's why I chose to use OdexLite which is a Nougat based ROM. Oreo and Pie seem to be too recent to have perfect functionalities seeing that S6 is way outdated today. So seeing Pie ROMS work seems, for now at least, a bit more dreamy than reality. Nougat has passed pretty much all possible tests and seeing most of them being abandonned by their authors, I think that most problems may have been resolved and that other issues which may raise are probably corrected with Oreo and Pie ROMs. But again, I do not use cellular lines as I use voip through wifi connections so I cannot suggest anything more than my experience as a computer technician concerning roms and softwares installed on old systems. We are now at the S10 phone, 4 versions higher with Pie starting to be the default system sold on recent phones.
My experience so far with OdexLite without cellular data: I have nothing but good to say. I've had no camera issues, no sound issues, no wifi issues and no problems installing anything I wanted. Up to now, it's the best and most stable ROM I've installed after XtreStoLite. Of course there are small things that I liked in Pie like theme changes and some keyboard changes but nothing compared to how fluid and stable the system is compared to Oreo and Pie ROMs I had tested.
And I am not bothered by any messages. Thank you for your usefull comment.
Click to expand...
Click to collapse
I was not able to install OdexLite, it always bootloop, but I was able to install Ultimate Nougat and I can confirm that it's the first ROM that mobile data works. So what I deduct is that Canadian providers locked mobile data (LTE) to Android 7 (Nougat) for SM-G920W8. I can't remember where I read that before, but it's not the first time I see that people had to update in order to get mobile data for it to work.
Sadness...
@coolmat Thank you for this very usefull comment. Even though I do not really understand why you get a bootloop with OdexLite, you still managed to get a Nougat ROM to work. If this resolved your issue for LTE network, I glad that Ultimate Nougat worked for you. And I think we just need to be patient and wait until there is more serious work for Pie ROMs until someone finds out how to resolve the network and other issues we have.
Added Ultimate Nougat in the list of Tested Nougat ROMs. Thanks to @coolmat for this little info. Tried the installation another time and rom worked.
**EDIT: I'm editing this because some people might not scroll more... Don't install this ROM. As green3water5 stated (below) it is in beta and after further testing, there's a big issue where rebooting kills it.
Guys, I just found the BEST ROM for the SM-G925W8! It's Android PIE and mobile data WORKS REALLY WELL!!!. (When you install, install the "US Variant")
This ROM is faster than all the other PIE, OREO, NOUGAT, and STOCK! It's faster than my S8 lol.
**MiUi camera, don't use stock
The ROM is also for the Note 5 and other S6 variants, hence 2GB size.
https://forum.xda-developers.com/note5/development/rom-floyd-n7fe-port-v1-0-t3882804
JeffYou said:
Guys, I just found the BEST ROM for the SM-G925W8! It's Android PIE and mobile data WORKS REALLY WELL!!!. (When you install, install the "US Variant")
This ROM is faster than all the other PIE, OREO, NOUGAT, and STOCK! It's faster than my S8 lol. This ROM gets an A+ (or as we Ontarians say "level 4+")
**MiUi camera, don't use stock
The ROM is also for the Note 5 and other S6 variants, hence 2GB size.
https://forum.xda-developers.com/note5/development/rom-floyd-n7fe-port-v1-0-t3882804
Click to expand...
Click to collapse
It states that the ROM is under Beta. Did you compare the sound recording of tha camera compared to the other ROMS I listed. Does the camera work flawlessly with Facebook Messenger and other apps asking for camera?
green3water5 said:
It states that the ROM is under Beta. Did you compare the sound recording of tha camera compared to the other ROMS I listed. Does the camera work flawlessly with Facebook Messenger and other apps asking for camera?
Click to expand...
Click to collapse
Sorry, my bad. Don't install the ROM. I used it all night and it worked great but if you boot it the second time, it will shutdown/reboot right after booting into the OS ( kind-of like a bootloop(?) ).
Did not work on SM-G920W8...
coolmat said:
I was not able to install OdexLite, it always bootloop, but I was able to install Ultimate Nougat and I can confirm that it's the first ROM that mobile data works. So what I deduct is that Canadian providers locked mobile data (LTE) to Android 7 (Nougat) for SM-G920W8. I can't remember where I read that before, but it's not the first time I see that people had to update in order to get mobile data for it to work.
Sadness...
Click to expand...
Click to collapse
Same here...