cm-11 successfully ported to SM-T900 (Tab Pro 12.2 - Galaxy Tab Pro 12.2, 10.1, 8.4 General

Updated 10/22/2014 10:20pm EST - Thread closed see new thread http://forum.xda-developers.com/galaxy-tab-pro-12-10-8/general/cyanogenmod-tab-pro-12-2-sm-t900-t2914991
chhaggerty has now posted his source built cm11 for SM-T900 that has a full OP, why this post no longer is needed. Additionally, his build is the most complete and also runs smoother than its predecessors. However, without the initial work carried out by crpalmer, Valera1978 and bonuzzz this release would not have seen the light until much later, if ever.
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valera1978 and bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Valera1978 said:
cm-11-20141012-UNOFFICIAL-v2wifi
Merge with latest official nigtly 20141012.
Also included new kernel.
https://drive.google.com/file/d/0B-6...ew?usp=sharing
Please test it.
Click to expand...
Click to collapse
Note: the BROWN text contain links to the actual postings

Need help installing the rom
arcadia2uk said:
Updated 10/18/2014 08:40am EST
I know this is not the correct place for this info, but the original thread is very, let's call it, chaotic. The OP is not maintained (do not flash .zip-files available in the OP), and it's very hard to find details unless you participated from the start and followed the development. Further, I believe this is of public interest for the community members, as the T-900 has not seen much development until now.
Tired of your laggy base ROM?
Valeria1978 and Bonuzzz from the P-900 forum has successfully ported crpalmer's cm-11 T-520 picassowifi to the SM-T900. The cm-11 ROM is very snappy and responsive, there is no reason not using it as a daily driver. Before flashing it's recommended to update to TWRP 2.8.0.0, see my note for details
Attention: This is a non-stock based ROM, why you also need to install gapps (set of packages - full, mini, micro, nano, pico). I prefer the Pico in order to be in control of the maximum of what is installed, but that's up to you.
Finally: Don't forget to make a backup of the ROM you currently have installed.
Do you want to try but are afraid to make the change? Bonuzzz has released MultiROM for T-900. This will allow keeping your TouchWiz ROM, and concurrently install cm11. You can then, seamlessly, go back and forth between the two alternatives.
Alternatively, you can also try it the traditional way. However, some people had issues in going back to StockROM after having tried cm11, but after flashing Bonuzzz's MultiROM kernel on the top of the TouchWiz ROM, it boots up immediately and radically improve the performance, isn't that a Bonuzzz.
For the cm11, there might be some minor, non-verified, remaining issue(s);
- auto-rotation - screen orientation is always presented in landscape mode, independent of settings. However you can use an app, eg Ultimate Rotation Control, to lock the screen in any direction.
- IR blaster - I used IR 2.0 and had no issues with TouchWiz, but no reaction with cm11
I will try keeping a POST up to date with latest developments
- LED notification lights - don't look for it, functionality is not supported by the device
- Proximity sensor - don't look for it, according to Samsung's specs the device does not have one
Details of what has been fully tested can be found HERE
Note: the BROWN text contain links to the actual postings
Click to expand...
Click to collapse
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.

Deslang16 said:
Hello,
I tried to install your rom but it gave me an error. I installed twrp 2.8 and then I flashed the cm11 rom. See attached picture for the error.
I am very new in flashing stuff so I hope someone can help me and tell me what to do.
Many thanks.
Click to expand...
Click to collapse
I hope that you started by making a backup of your current ROM. Thereafter, I assume you did a factory reset, and also wiped your system.
However, It looks like you are installing gapps before the ROM, it should be the other way around. First ROM, then gapps.

Related

[7.March.2012][ROM][P73xx] ♫♫ Overcome 8.9 Series v2.3.1 ♫♫

DISCLAIMER: You know the drill, I am not responsible if loading this rom makes your Tab melt, explode, disintegrate, or cause harm to anyone near it. (I am fairly certain none of that will happen though )​
Change log in second post.
Welcome to The Overcome Experience - 8.9 Edition . For those of you that don’t know me, let me introduce myself. I am AlterBridge86, the creator of The Overcome Experience. I started developing a ROM on the OG Galaxy Tab (P1000) about 10 months ago and have moved on to having my own brand of ROM’s, Kernels, and Recoverys. The Galaxy Tab 8.9 (P7310) is now the third device family to get a “Overcome Series” ROM, however it will most definitely not be the last.
My mission is simple. I aim to vastly improve the stock user experience on Samsung devices. I think that Samsung makes fantastic hardware, however fails to bring the same level of software quality to their devices. This is where I step in. I take the base rom, as provided by Samsung, and perform further optimization and modification to it. My mods aim not to completely customize the user interface, but rather add some very useful key functionality while retaining the “stock android” look.
NOTE: This will NOT work on the LTE variants of the 8.9!!!​
ROM FEATURES
Please read the announcement post on the TOE website for a full rundown of the release! http://www.teamovercome.net/p7300
Based on P7300XWLA2 / P7310UELA3 (Android 3.2)
Fully Deodexed
Fully Zipaligned
Rooted/Busybox installed
Stock kernel with modified initramfs
Themed with stock-ish Honeycomb look
Ads blocked
Updated Maps to 6.3.0
Updated Play Store to 3.4.6
Updated SamsungApps to 3.10.115
Updated Flash Player to 11.1.111.7
Updated Play Books to 2.3.5
Updated Play Music to 4.1.513
Updated Play Movies to 1.4.9
Updated YouTube to 3.5.5
Launcher from P7310UELA3 (equally as smooth as the stock launcher while retaining TW functionality)
Modded Browser from Android 3.2.2 (UAString chooser in Advanced Options)
Bootanimation.zip support (cool boot animation included thanks to gammaRascal in the Iconia forums)
Extended Power Menu (Reboot, Recovery, Download)
Install Instructions
Download CWM from here if you don't have it already: http://forum.xda-developers.com/showthread.php?t=1312218
Download the appropriate install zip from below and put it in your Tabs internal storage
Reboot into CWM recovery (Turn Tab off, then press power button and volume down until you see the choice to boot download mode or recovery. Press volume down to highlight recovery, then volume up to select it.)
Navigate to install from zip, choose the install zip and install away! (Wiping data prior to install is recommended)
However, if you wish to attempt a non-wipe install (ONLY for users already on Overcome), follow these instructions: Prior to rebooting into recovery for install, go into Manage Apps and clear data on launcher. Immediately reboot into recovery using the power menu - DO NOT go back ot the home screen first. Install zip without data wipe. After install completes, wipe cache. Reboot.
Wiping data is highly recommended, especially if coming from a stock rom or another rom. You can do this prior to the install from the main screen of CWM recovery.
SCREENSHOTS
INSTALL GUIDE
http://www.teamovercome.net/p7300/?page_id=6
DOWNLOADS
http://www.teamovercome.net/p7300/?page_id=9
MIRRORS
None at this time...
SOURCES
https://github.com/alterbridge86
REMOVED APPS DOWNLOAD - To install, simply place the apks in /system/app. These will NOT install like a normal APK.
P7300 - Removed until i modify them to not include non-samsung apps
P7310 - Removed until i modify them to not include non-samsung apps
HideBar - http://ppareit.github.com/HideBar/
The best is yet to come!
KNOWN ISSUES
Wallpaper does not scroll (but this is by design really...its why the launcher is SO smooth...)
ROM AND KERNEL CHANGE LOG
Overcome 8.9 Series v2.3.1
eBook application returns!
Updated Books to Play Books 2.3.5
Updated Music to Play Music 4.1.513
Updated Videos to Play Movies 1.4.9
Updated Market to Play Store 3.4.6
Updated Flash Player to 11.1.111.7
Updated YouTube to 3.5.5
Removed HideBar (did not work reliably when preinstalled – please get from HideBar website if you wish to use this app)
Reverted to a modded stock browser (will fix most back button bugs as well as some user agent issues)
Overcome 8.9 Series v2.3.0
Rebased on P7300XWLA2/P7310UELA3
Updated Maps to 6.3.0
Updated Flash Player to 11.1.111.6
Updated Samsung Apps to 3.10.115
Launcher from UELA3 used (significantly improved landscape performance)
HideBar v0.12 included (installed in /data so can be removed by user if they so choose)
SwitchMe v1.2.2 included (installed in /data so can be removed by user if they so choose)
CWM Recovery 5.5.0.4 Included
Hello All! The Overcome Experience has come to the Galaxy Tab 8.9 I am glad to be here and providing the best experience possible to all Galaxy Tab 8.9'ers out there
I have just a few points to cover in this post, and then we're off to the races. I'm sure some of you may be familiar with my works and know that I have a website, www.teamovercome.net, which houses an excellent install guide, tweaks, faqs, downloads, and more for all the devices I support. Unfortunately, we are having an issue with our host so I will not be building a website for this device until we are set up on a new hosting service. However, I did not want that alone to hold up the release of this ROM, so here we are
During the course of my development, I have made two very important discoveries. Firstly, as you most likely noticed in the first post, we are running a P7510 rom. Yes, P7510 roms are 99% compatible with the P7310 - only minor tweaking is required to make it work perfectly. For this reason, I have based this rom off of the latest rom available for the P7510 which is very smooth and performs exceptionally well.
My second discovery comes with some good and bad news. I'm sure you all have noticed that there is horrendous lag when swiping between the homescreens in landscape mode. Initially, I blamed this on the rom. I tried several different P7310 roms, including the P7510 rom which this release is based on, and while some were better than others, it continued to exhibit more lag than the P7510. Naturally, I found this extremely odd because these devices are identical with the exception of the screens. Another bit of background info before moving on in this story, Honeycomb has been plagued with an issue up until the 3.2 release which caused the device, when used in portrait mode, have very stuttery, laggy performance. The 3.2 release significantly improved that issue so much that it is nearly identical to the performance of landscape mode.
Moving on, I learned that the tab actually has a default orientation of portrait (notice that CWM is in portrait mode on the 8.9, whereas on 10.1 it is in landscape). As a result of this, there is a modifier in the build.prop that rotates the screen appropriately. However, the side effect of this, is that the performance issues seen on typical Honeycomb tablets in portrait mode now manifest in landscape mode. If you flip the tab into portrait, you will see the butter smooth performance one would expect in landscape. (I urge you to try this out once you flash the rom - it gives you a taste of what is to come in the future!) So the bad news of this is that there is really nothing I can do to fix this at this time. This rom has SIGNIFICANTLY improved landscape performance, but its still not perfect. The good news however is that once we get 3.2, and definitely ICS, we will no longer have to worry about these sorts of performance issues.
All that said, I hope you all enjoy the release and as always, the best is yet to come!
Great! Can't wait to flash!
does it work with p7300??
eager to try it i loved overcome for galaxy tab
davioxx said:
does it work with p7300??
eager to try it i loved overcome for galaxy tab
Click to expand...
Click to collapse
You would lose 3G capability...I will have a P7300 rom coming in the near future...its just not ready yet
well i dont use my 3g capability , so I will download it right now but still count me for testing/using the correcto 7300 version =D, also is it necessary to wipe?
edit: recovery is good to go for the 7300?
thanks alterbridge
Wipe is a recommended idea - you can try without it and see how it goes, but if you are seeing all sorts of FC and stuff, then you should wipe.
Recovery works on both 7310/7300, if thats what you mean...
Looking forward to your P7300 ROM, any ETA date?hehe
Would like to see this work on 3g as well. But I can't stop salivating on this...
I'm strapping myself now, not to do anything with my tablet. I relied too much on 3g internet...
Much obliged alter. Putting it through the paces now, so far so good.
Sent from my GT-P7310 using Tapatalk
Success
Hello guys just confirming it working on the 7300 no 3G data Ive never used it before so cant confirm anything,
took around 5 minutes for first boot, wouldnt work without wipe
Looking forward to the 3G version- can't have that not working so please release it soon. Pretty please
waiting ROM for support my TAB8.9 7300B
Sweet! Will flash once I get home from work tomorrow!
Hey, I just won a 8.9 and am considering this ROM due to the HW acceleration. Is it possible to revert the soft buttons to the TouchWiz versions? While I'm fine with the "Tron" look of stock Honeycomb, it doesn't match Touchwiz well.
davioxx said:
Hello guys just confirming it working on the 7300 no 3G data Ive never used it before so cant confirm anything,
took around 5 minutes for first boot, wouldnt work without wipe
Click to expand...
Click to collapse
Great! So who would u describe the performance? Compared to stock. Does the UI still lag? What are your first impressions
Sent from my GT-I9100 using XDA App
can this kernel be overclocked?
is there any posibilities to have a GSM voice call on this ROM in the future?
Very much looking forward to a P7300 3G build of this!
Also, +1 on the question of overclocking/undervolting; Tegra 2 is cool and all, but it's no Exynos.
My GS2 has spoiled me when it comes to performance. <_<;;

Galaxy S3 [I9300] - Basics,Best Performance Package - Mod's and ROM's & Kernels

So, I have been using an S3 {yeah S3 , i know old, but duh i just love it } for over 3 years now . I started out as a complete noob, still am, and S3 was the first phone that i started working on. Over the years i have tried many custom ROM's , Kernel's and MOD's and i have tried here to create a List of Best Performing Custom Items over the course of 1 year, with special care for people like me who have just started out in the world of android, So here goes. {in 4 steps} :-
<1> Best "FAIL-SAFE" Method of Rooting/Installing a custom ROM - I know most of the people are afraid of bricking their device's, the first time they root. I have been in that situation and had my phone soft bricked many times while trying out different thing's. So the Most FAIL-SAFE Method that i have come up with is this:-
Many people suggest rooting the devices first and then installing a custom ROM. I have tried to do things a little differently so that the first timers can get comfortable.
A. First thing to do is install CyanogenMod on your specific devices. [without rooting] , The developers at cyanogen have made an application to directly install Cyanogen to your devices from your PC like a regular Software Install. The Link and the Instructions can be found on the official Website - http://get.cm. The process is very simple and easy to do and after the install your device gets automatic root access. The xda thread - http://http://forum.xda-developers.com/android/apps-games/app-cm-app-installer-t2959922 - {you get CM - 11 from this download }
B. Now that your device is has CyanogenMod, you get a rooted device and a custom ROM. But the problem with Cyanogen is that the Custom recovery which it provides has very limited options available. So the next step is to go to Google Play Store and download "TWRP Manager" or "ROM Manager" [i personally use TWRP]. This application will help you to Install the TWRP or CWM recoveries on your Phone. The process is fairly simple, After Installing the App, Choose your Device Model and Version and Let the app do the rest of the work. PS the apps require ROOT access which your phone can provide now.
C. By now if all the steps are performed correctly [very less chance of something going wrong because most of the tings are done automatically] your respective device should have a custom Recovery installed. Next and Most important step is to Create a NANDROID BACKUP [basically an ultimate backup to restore everything]. Go to recovery mode [Home+Volume up + Power button] and select backup, and make a complete backup on your SD card. It's really important to create a Backup before doing anything. This step must not be skipped in any case.
D. Now it's time to let your imagination run wild xD, Download custom ROM's, Kernel's MOD's etc and just copy the zip's to the SD card and install them using the recovery. In case anything goes wrong Just restore from the Backup you made earlier.
[PS: Update your backup's regularly]
<2> Now's the list of My Personal Favorite's which Have Improve the overall Performance of My Phone Greatly. All the ROM's, Kernel's etc have been personally tested by me for over 3 month's for Issues related to Stability, Performance and Bug's . I have tried to put forward the Best package for optimal performance.
1. Recovery [doesn't affect much] - - TWRP Recovery: Personally "Team Win Recovery Project (TWRP)" is my favorite because of it's easy to use touch control's , it's efficiency and Design. I like the cool blue texture theme of TWRP and the speed with which it create's backup and install's new things. The performance of the Phone does no depend upon the Recovery though and you may choose whichever recovery you are comfortable with.
2. ROM - BlissPOP v4.0.3 (CM 12.1 base) : Yes i have chosen this ROM out of the many other i tried. The reasons are very simple, This ROM provides outstanding stability and Performance to the device. There is no bloatware in the ROM and there are simply hundred's of features available for customization. It's compatible with generally all the Kernel's and Mods available for your device and the regular Nightlie's are an added bonus. It's the only ROM based on Lollipop(5.1.1) in which i haven't found any Bug's or stability issues.
Many people told me to try Paranoid ROM but personally i find Paranoid a little buggy, and i found that the PI controls and Halo, due to which the ROM is popular are not of any important use to people like us. They only add a touch of appearance to the device [strictly my view and i mean no offence to any other person ].
3. Kernel - Archie kernel for Galaxy S3 - http://forum.xda-developers.com/galaxy-s3/development/kernel-archikernel-v1-0-power-hands-t2785337
4. MOD's -
A. Audio Engine - Ac!d Audio - http://http://forum.xda-developers.com/galaxy-s3/development/mod-acid-audio-engine-v5-0-samsung-t2002197
Viper4Android -http://forum.xda-developers.com/showthread.php?t=2191223
6. Root Applications -
A. Titanium Backup:
You can backup, restore, freeze (with Pro) your apps + data + Market links. This includes all protected apps & system apps, plus external data on your SD card. You can do 0-click batch & scheduled backups. Backups will operate without closing any apps (with Pro). You can move any app (or app data) to/from the SD card. Available on Google Play
B. AdAway for Android [built-in app in BlissPop ROM]:
to block ads on your Android device this app is not avalibale on the playstore but you can still install it from this link
C. Greenify:
Is a good application to make your Android device more faster, by hibernating the background apps that you don't use. this application is completely free. Available on Google Play
These are the only Apps which i find useful in the long run as i have to use them constantly. Rest application's are used from time to time but not regularly. So this is My List, i'd be glad if anyone want's to add to it ^.^
I'd Like to Thanks the Amazing People who have Made the above Programs to make our Phone More performance and Appearance efficient. ------> CyanogenMod community, BlissPOP community, xda developers, Jeeko, JustArchie, amarullz, the Ac!d Audio Engine Team,zhuhang(Viper Mod), TWRP team.
Give a Thanks if u were helped by the post
================================================================================================================
Intense Testing Period -> Over 8 months [tried the new Lollipop ROMS's , over 20 kernels, Latest Android M ROM's , some personal opinions
================================================================================================================
Firstly sorry, for the delayed updates, i have been a little busy trying to develop my own ROM (surprise! surprise!, not for S3 unfortunately thought as i can never come close to the current ROM wiz's ), now in the second edition , I have tried to utilize my knowledge over 8 months to put up a new more enhanced guide and have also put up common and uncommon bugs which I experienced along the way and have provider the working solutions for them. Also I am extremely sorry for all those broken links and not working Mods, i'll try to keep my list precise, sharp and accurate this time.
1. Alternate method to Root (super easy, risk free, takes at maximum 5 minutes) - {for windows running PC, stock ROM or any other custom ROM can be used}
So, I would still recommend using my method 1 in order to initially root your device, install a custom ROM and a Recovery as i know the fear and anxiety or every new user trying to root his phone for the first time.
Now for a little more experienced users (quickie guide) [for I9300 version] who do not want to spend a lifetime to just get their devices rooted -
(a) Download the Chainfire's AutoRoot file here and place this file on your PC.
(b) Download Odin (latest version) on your PC here and unzip the file and start odin.
(c) Power down the device, then reboot in Download Mode [ press Power button + Home Button + Volume Down Key] and press volume up key at the caution screen. (little Hint: mostly the device reboots itself when you do not press the 3 buttons at the same time, to counter this press the volume up button and the home button first and hold them and then press the power button until you see the Galaxy S3 logo)
(d) Now connect your device to your PC using a sturdy USB cable. After doing this 2 outcomes are possible:-
~1. Your device is identified by Odin and a faint blue colour is shown on one of the top tabs indicating the port through which your device is connected. In this case proceed to step (e).
~2. If your device is not recognized by odin ie no blue colour, then the drivers of your device might not be installed on your PC. To tackle this download the Driver Suite from Samsung here and run the program. If done correctly when you next connect your device the drivers should get installed and odin should recognize your device.
(e) Click the "AP" button on odin and select the "Chainfire's v-xxx .mad5.tar " file which you downloaded above, odin will then take some time to check the file and when it's ready press start. CAUTION - do not change Odin's settings and assure that Reset Runtime and Auto Reboot are selected, never select re-partition on the odin interface.
(f) After the installation is complete your device should reboot automatically and you should have SuperSU installed (indiacting 99.99% times that your device rooted successfully ).
(g) If you want you can then install a custom recovery using the method indicated in my "method 1" [above].
-feel free to message me for any doubts-
Here are some of my new recommendations based on personal experiences:-
2. ROM's - I will try to divide this section based on firstly Android System and then further based on Stability, Features, Performance. Further i will be adding 2 ROM's for Android M . [i will not be naming ROMS which have a touchWiz interface]
(A) Android Lollipop and Below
Stability - Official CyanogenMOD 11.x [kitkat 4.1.1] - Zero Doubt, this one is the most stable thing out there for S3, old, yes but well you can do anything you want with this ROM and it will not seriously bug out on you when you need it. If someone does not mind going for an older version of android and needs epic stability, just go for it.
Features - BlissPop v3.0.x [CM 12.1 base][ Lollipop 5.1.1] - This ROM is filled with features, you name it, this ROM has it, PI controls, Built-in apps including AdAway, Kernel Modifier, Greenify, SuperSU etc, seamlessly integrated into the build environment. Each and every feature of this ROM is customizable, every font, colour and animation. Simply put, for someone who needs features and customizations go for this one. On the other hand, this ROM is less stable (crashes quite often ) and provides a slightly laggy gaming experience. No bloatwares in this ROM.
Performance - ArchiDroid [CM12.1 base][Lollipop 5.1.1] - Performance, Performance and more performance, all the technical aspects of your device will be enhanced and although the customization features are minimal but this ROM turns your device into a Performance Beast. All the gamers and performance lovers, what are you waiting for
Android 6.x.y Marshmallow
1. RESSURRECTION REMIX M - Fast, Durable, Amazing performance. Fell in love with this one when i used it, and this is my current ROM, no bugs so far and have been using it for over 1 month. Immensely Customizable, no lag during gaming, an amazing upgrade from Lollipop.
2. NamelessROM 3.0 - Feature Loaded, Minimal, good Looks and customization features and of course the ever caring support team of Nameless makes this a go to ROM.
>>> A bit more studying will be required before i finally divide the Android M ROMS's based on their features, performance and stability. Will be posting the results as soon as i am finished.
3. Kernels - AGNi pureCM and Boeffla-Kernel (26-03-2016) , tied, tested and proved that they are the best on very benchmark or performance test, although battery usage is better balanced on AGNi whereas Boeffla is more inclined towards performance.
You can find the Links to all the above ROM's and Kernels and many more in this thread - here
PS - Please Post your bugs in the thread and i will do my best to try and solve them out with an easy and sure solution
Cheers!
Awesome rundown for a new user like me. I've just got an S3 after using a Nexus S for 3 years. The S3 feels like such a beast compared to it!
I want to root and put a custom ROM on my device this weekend. I currently use cm11 on my Nexus S but it's a bit slow (which is understandable considering the hardware) so I can't wait to try it on the S3. My priority is long term stability ( I don't like flashing the emperors new clothes every 5 minutes). I just want to flash a ROM and forget it.
Have you tried any slimroms on the S3?
Sent from my Nexus S using XDA Free mobile app
[email protected][email protected] said:
A. First thing to do is install CyanogenMod on your specific devices. [without rooting] , The developers at cyanogen have made an application to directly install Cyanogen to your devices from your PC like a regular Software Install. The Link and the Instructions can be found on the official Website - http://get.cm. The process is very simple and easy to do and after the install your device gets automatic root access. The xda thread - http://http://forum.xda-developers.com/android/apps-games/app-cm-app-installer-t2959922 - {you get CM - 11 from this download }
Click to expand...
Click to collapse
Hi.
Can you just go over this again. Do I use my phone to download an installer from http://get.cm, install the apk then I will have root?
edit - damn I don't use WIndows, only Ubuntu. I can't use it.
Cheers.
Hi warren
Yes I have used slimrom too on the s3. Its good but as u are looking for stability I would suggest go for cyanogen because in my experience cyanogen shells out a better performance as compared to slimrom. My gaming experience was a little reduced in slimrom and I experienced a little lag but no such issue in cyanogen.
Secondly if you use ubunto I would suggest going for a virtual box to install windows and then the cyanogen application as it's the safest way to install a ROM.
U have to got to " get.cm " from both your phone and PC
On PC a windows installerbwoll be downloaded and on the phone an APK will be downloaded first install the apk the install the windows program and then continue as given in the installer setup.
Else mate, I wud say first download the stock ROM of s3 as a backup and the continue to root in the traditional way .
Any problem just ask me
Cheers
Hi.
I was thinking the same. CM11 all the way! I used Slimrom on my Nexus S but it was very very slow. I almost smashed my phone in frustration.
Nice tip about using a virtual machine to install cm. I will have a think about that. At the moment I have found a very good guide that involves using Heimdall on Ubuntu and Chainfire,so i will probably go for that method.
I am definitely going to try arter97 kernel. It looks immense. It has boeffla sound which I am looking forward to trying.
Sent from my GT-I9300 using XDA Free mobile app
A little Confused....???
[email protected][email protected] said:
Hi warren
Yes I have used slimrom too on the s3. Its good but as u are looking for stability I would suggest go for cyanogen because in my experience cyanogen shells out a better performance as compared to slimrom. My gaming experience was a little reduced in slimrom and I experienced a little lag but no such issue in cyanogen.
Secondly if you use ubunto I would suggest going for a virtual box to install windows and then the cyanogen application as it's the safest way to install a ROM.
U have to got to " get.cm " from both your phone and PC
On PC a windows installerbwoll be downloaded and on the phone an APK will be downloaded first install the apk the install the windows program and then continue as given in the installer setup.
Else mate, I wud say first download the stock ROM of s3 as a backup and the continue to root in the traditional way .
Any problem just ask me
Cheers
Click to expand...
Click to collapse
My understanding is that unless you rooted your S3 quite a while ago, pre 4.4.2, you can't add custom ROMs. The late-rooters would have a locked bootloader and would be severely limited on what mods are possible. Is my understanding incorrect? Thanks!
Oh my I hope this isn't the case.
Is this not just on Verizon or all s3's?
Sent from my Nexus S using XDA Free mobile app
Sorry to confuse things. I believe the locked bootloaders only apply to those unlucky enough to have Verizon phones.
Yay not me then! NP.
P.S. Verizon suck!
Yes mate unfortunately Verizon version of S3 has a locked boot loader and it does not allow the user to install a new recovery. I would suggest using Odin to auto root your phone which in turn also unlocks the boot loader. I can make a step by step guide for Verizon version if anyone requires it. Personally I prefer the international version though. It has more optimized system functions.
Tell me if u want a Verizon guide
$$-
Thanks for your reply. Sure, if you have something that will allow me to unlock my Verizon Galaxy S3 bootloader, that would be great! Is that what your verizon instructions will allow me to do? I've never heard of any way of doing this, so that would be great if it works! Btw, I am running 4.4.2. Thanks again!
What about /EFS backup and locked boot loader?
I have been an old time user of android starting with sony xperia X3. I had a bad luck with that phone. When sony updated android from 1.6 to 2.2 , the phone went into a boot loop and finally got dead. I sold the battery and screen separately to make some cheap buck!!
After that experience, I have been reading a lot for rooting and there seems to be lot of info on that.
My phone model is Samsung S3 GT-I9300 international version. I am still on the stock Rom with 4.3 on it.
I tried with kingroot app and it bricked the phone and was able to recover with kies.
What I want to know is that, you have mentioned option A, do I need to make any backups (not the contacts and personal stuff which I am not worried when I start playing with the phone) of EFS partition?
Will I be able to restore to old stock ROM just by using ODIN and the firmware which is available from the market?
What I need to know is , will I need any specific data (IMEI or EFS) unique from my phone?
Hi [email protected][email protected]
I used Heimdall in Ubuntu and I managed to root and put SuperSU on my phone ! I also put TWRP recovery on as well and then did a backup of my stock ROM. I am now ready for some ROM flashing!
I am unsure whether to go for CM11 or something like Tamasek's CM12.1 ROM. Have you used Tamasek's ROM before? Thinking about it for the first flash I think I will use CM11 snapshot and arter97 kernel. Then I will nandroid backup and then I have a stable ROM/kernel combo to fall back on in the future.
Looking at arter97 kernel can you tell me about f2fs support and how I get it? Does it speed up certain parts of the memory? Is it worth flashing? Also, the kernel mentions touch wake. Is this available for the S3?
Cheers.
I can't believe it I bust my sim slot! I cut my old sim card with a tool cutter and it looked good but it was a little tight going into the slot and I pulled it out and that’s when I must of bent some pins. I'm gutted :crying::crying:
Thankfully a replacement is only £3 and swapping it over looks a doddle :fingers-crossed:
Looks like I will have to wait a week until I can have a proper play. I did download BlissPop ROM and I like it. Been playing around with that all day but Its still not a phone until I get my sim in it.
You live and learn
mathew_p_a said:
I have been an old time user of android starting with sony xperia X3. I had a bad luck with that phone. When sony updated android from 1.6 to 2.2 , the phone went into a boot loop and finally got dead. I sold the battery and screen separately to make some cheap buck!!
After that experience, I have been reading a lot for rooting and there seems to be lot of info on that.
My phone model is Samsung S3 GT-I9300 international version. I am still on the stock Rom with 4.3 on it.
I tried with kingroot app and it bricked the phone and was able to recover with kies.
What I want to know is that, you have mentioned option A, do I need to make any backups (not the contacts and personal stuff which I am not worried when I start playing with the phone) of EFS partition?
Will I be able to restore to old stock ROM just by using ODIN and the firmware which is available from the market?
What I need to know is , will I need any specific data (IMEI or EFS) unique from my phone?
Click to expand...
Click to collapse
Hi Mate,
First of all, don't worry at all about the bricking thing, with the option A that i have mentioned, it's 99.99% success, i haven't found a single person yet for whom the method didn't work.
Secondly i would suggest u take the backup of your phone contacts in a vCard format using Kies first so that u don't loose them. And copy all your Personal things on your PC (pics, videos etc).
Thirdly you do not need to make a separate disk partition for the method to work, the CM installed will do it for you. Also if u have an International i9300 version u need not do a single thing yourself. Just start the setup and sit back and relax. Just follow my method to the letter and you can have a great custom ROM with root access in no time.
MOST Importantly - You can go to stock firmware of samsung but this time you will have to use odin instead of Kies to do that. You won't be able to use Kies once you have installed a custom ROM, but trust me that's a small price to pay for a very efficient ROM.
You do not need to know the IMEI or EFS number though i would suggest u still make a note of it somewhere in case ur phone is lost. Prevention is always better Message me if u have any queries. Cheers!
Warren_Orange said:
Hi [email protected][email protected]
I used Heimdall in Ubuntu and I managed to root and put SuperSU on my phone ! I also put TWRP recovery on as well and then did a backup of my stock ROM. I am now ready for some ROM flashing!
I am unsure whether to go for CM11 or something like Tamasek's CM12.1 ROM. Have you used Tamasek's ROM before? Thinking about it for the first flash I think I will use CM11 snapshot and arter97 kernel. Then I will nandroid backup and then I have a stable ROM/kernel combo to fall back on in the future.
Looking at arter97 kernel can you tell me about f2fs support and how I get it? Does it speed up certain parts of the memory? Is it worth flashing? Also, the kernel mentions touch wake. Is this available for the S3?
Cheers.
Click to expand...
Click to collapse
Hello Warren,
Good to hear that you are having fun with your new phone.
Firstly yes i have used Tamasek's/JustArchie's CM12.1 ROM and it's quite good to be honest. So first i'll talk about it then i'll come to the kernel.
So 12.1 yes, the most noticeable change android L 5.1, all good, nice appearance, but i would say just think again for a bit.
A comparison between the two is a mammoth task but i'll try to brief it for you and tell you why i like the CM11 better even though it has android KK. It's upto to you though what you choose to flash. i even have a nice tip for you in the end
So first let's see the CM12.1 -
Quite stable, i used it for like a month or so for testing and got a good result. The performance was at par with the rest of the ROM available for S3. The Graphics, Audio and Processing quality is also good and is suitable for light use. Here's the catch though, Firstly the Gaaps, many gaaps available Android L are not compatible with the unofficial 12.1 so u'll have to look around to find the correct set of Gaaps.
Secondly i personally find that the CM 11 has a much neat finish as compared to CM 12.1, i don't really care about the android version as for me if i can have all the features of android L in a more stable KitKat ROM i don't usually upgrade my ROM. THe reasons are very simple
Firstly it's Unofficial, No Nightlies, rare updates. Also the unofficial ROM is alive only till the Developer is still working on it. Once he stops his work it's a very slim chance that you can get your bugs fixed.
As for the Official one, there are thousands of forums on Solutions to various Bugs and Numerous customization options. We can't really know whether the unofficial 12.1 supports all the things available for the official ROM.
Based on Performance both the ROMS perform equally, there's a camera Bug in the 12.1 which can be a problem sometimes but rest is all good.
On a personal side [not really of importance] i like the Calculator of the CM 11 better than CM 12.1.
Now the Kernel - arter97 is simply amazing, The most noticeable changes are - 1800 GHz overclocking [yeah from 1400 to 1800 BOOM!],
the Knock feature - Tap the screen to unlock the phone, no need to use any buttons, Battery Tweaks etc.
Also it used a custom engine to allocate the Files to various partitions to the memory so yeah it saves space plus we can even Increase our RAM a bit by using the Internal Memory of the Phone.
I am a Hardcore Gamer and use my phone to the limit sometimes [ Playing Asphalt 8, Real Racing, GTA: San-Andreas, FIFA 15 and WWE Immortals can take it's toll on the phone.] these games require very high end phones but with this kernel they all run liquid smooth on my phone without even a slightest bit of lag. So yeah i would surely recommend arter97's Kernel. PLUS u get Boeffla Audio Engine which is an added BOnuS
Touch WIZ -- Not Necessary, I flashed it using TWRP and it worked Just fine.
f2f - f2f has better memory allotments and it's pre configured, we usually don't have to enable it, it's much better than extD though.
TIP - arter97 supports dual Booting so you can even enjoy cm12.1 and cm 11 at the same tine [Dual Booting i'll cover in the next post if you have a problem doing it ]
-----> Also U can use the Siyah Kernal, which work's just fine and even has an amazing Boot Image but now as much features as arter's.
straykat said:
$$-
Thanks for your reply. Sure, if you have something that will allow me to unlock my Verizon Galaxy S3 bootloader, that would be great! Is that what your verizon instructions will allow me to do? I've never heard of any way of doing this, so that would be great if it works! Btw, I am running 4.4.2. Thanks again!
Click to expand...
Click to collapse
Hello,
well i have two methods for Verizon Phones, One i have tried myself the other one was tested by one of my friends,
For the First one -
Using Odin Use the Chainfire's Auto Root Application to give root access to your phone. https://autoroot.chainfire.eu/ This application in turn also unlocks the bootloader and hence you can easily install further ROM's. Check the Xda general Samsung forum to learn how to use Odin if u don't know , or just message me
Second - This Method requires Root Access on you r Phone. THere's an app on Google Play named "EZ Unlock" to unlock the bootloader , I think this app can help you out but i haven't tried it myself so i can't really comment. But looking at the reviews i would say that this app really works. ----> http://www.mediafire.com/download/qozzz1p43kxzs3z/EZ-Unlock14.apk
Here's a custom Recovery that can help too - http://forum.xda-developers.com/showthread.php?t=2797314
Cheers!
Hi..I did a search but i am completely confused and bewildered by the vast amount of different posts and opinions in threads..so i apologise if this has broken any rules.
Basically i have a stock s3 i9300 (uk) with original samsung jellybean 4.3 rom,I am getting a bit sick of it now (and the bloat) and i am looking to move on to something more appealing..I have already rooted and installed Rom Manager and CWM..i was wondering what the "Best Simplistic dark themed (small footprint) rom" to go for As i want minimal installed size to make the most of my 16gb memory,i dont mind which android version as long as the process is easy and the battery life is among the best available..And of course it is as stable as my current Samsung android rom..
i would really appreciate any valued veteran guidance..many thanks.
[email protected][email protected] said:
Hello,
well i have two methods for Verizon Phones, One i have tried myself the other one was tested by one of my friends,
For the First one -
Using Odin Use the Chainfire's Auto Root Application to give root access to your phone. https://autoroot.chainfire.eu/ This application in turn also unlocks the bootloader and hence you can easily install further ROM's. Check the Xda general Samsung forum to learn how to use Odin if u don't know , or just message me
Second - This Method requires Root Access on you r Phone. THere's an app on Google Play named "EZ Unlock" to unlock the bootloader , I think this app can help you out but i haven't tried it myself so i can't really comment. But looking at the reviews i would say that this app really works. ----> http://www.mediafire.com/download/qozzz1p43kxzs3z/EZ-Unlock14.apk
Here's a custom Recovery that can help too - http://forum.xda-developers.com/showthread.php?t=2797314
Cheers!
Click to expand...
Click to collapse
[email protected]
Thanks for the info! I looked on a Chainfire thread here on xda to see if others have done what I would be attempting to do with my Verizon S3, but I don't see anyone else saying they've used this method to unlock their bootloader & install roms. By chance, do you know any place on this forum or any others that talk about peoples' successes using this method on a Verizon S3? I'm a little nervous about attempting this method without knowing that lots of other people have done so successfully.... Thanks for your help & your understanding of my feelings on this.
Broken Link
Your "Mods" links are broken.

Any love for SM-T230NU?

I want to know if there is any ROM for my Galaxy Tab 4 7 Inch (SM-T230NU)?
just test if reply is working.. because i wroth you a big tutorial and i submited get a frustation error msg
---------- Post added at 02:29 AM ---------- Previous post was at 02:02 AM ----------
iSuperAwesome said:
I want to know if there is any ROM for my Galaxy Tab 4 7 Inch (SM-T230NU)?
Click to expand...
Click to collapse
Sorry to not get this Tutorial as elaborated as I wroth before but I get flustered by getting a error when submit
-----------------------------------------------------------------------------------------------------------------------------------------
I use a windows software call SamFirm do download VERY FAST the lastest original firmware from Samsung servers.
Link: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Note 1: You need to specify the “Region/Country” of the Firmware. For that, you can look at some sites that have the same Firmware (Links below). But don’t download from this sites, because is VERY SLOW.
http://samsung-updates.com/device/?id=SM-T230NU
http://www.sammobile.com/firmwares/database/SM-T230NU/
http://www.androidayos.com/galaxy-tab-4-stock-firmware/
http://forum.xda-developers.com/tab-4/general/links-stock-galaxy-tab-4-firmware-t3013128​
Note 2: The region “BNN” is for the Samsung galaxy Tab 4 7.0 Nook Edition
How to use SamFirm:
1 - Model = SM-T230NU <-----------------(Ex: Samsung Galaxy Tab 4 Nook 7.0" = SM-T230NU)
2 - Region = BNN <------------------------(Ex: “BNN” for Nook Edition)
3 - Auto = ON
4 - Click "Check Updates", if firmware for the particular region exist you see a msg in Log Window below
5 - Check CRC32 = ON <--------------------- Check is the file is intact
6 - Decrypt automatically = ON <----------- Decrypt file after download
7 - Click "Download” and choose the destination folder
8 – Extract the .md5 using 7-Zip (Nota: WinRAR get error sometimes)
9 – Done, now you can use Odin3 to upgrade you firmware
Cheers
iSuperAwesome said:
I want to know if there is any ROM for my Galaxy Tab 4 7 Inch (SM-T230NU)?
Click to expand...
Click to collapse
It sounds like you were asking about custom ROMs, as opposed to keeping official firmware up to date which is what BXA is talking about. For the record, instead of installing an extra app just to keep up to date on official firmware releases, you can always check my threads which I keep up to date on official firmware releases for all Tab 4 variants:
--Official Tab 4 KitKat Firmware thread
--Official Tab 4 Lollipop Firmware Thread
Assuming you were inquiring about custom ROMs, below is a list of the most popular and/or well-maintained ROMs that will work for your device (pro-tip, even if the ROM says it's only for the SM-T230, it will work on your device, but you probably will lose IR blaster functionality). Before you ask, there are no viable CyanogenMod-based or even AOSP-based ROMs for this device (or SM-T230). They tried to get CyanogenMod working for your device, but as of right now the available builds either don't boot entirely or boot but have bugs like Wi-Fi not working. I'll link to the thread with the relevant info and downloads, but don't expect much, certainly nothing stable enough for daily use. The list I promised you:
--Acheron ROM (well maintained, popular, great dev to interact with, and even though I don't own your device, my recommended starting point)
--Prism Barebones (unfortunately apparently no-longer maintained, but still a solid, popular ROM by a well-respected dev, a legit alternative to Acheron)
--TranchidaKat (seemed to be gaining in popularity, unfortunately the dev recently took a break from maintenance)
--T230 Smooth ROM (I don't really know much about this ROM, but from what I can tell it seems/seemed reasonably popular)
There are a couple more ROMs I feel reluctant even mentioning, and can't really recommend with any sort of confidence. The first had an OK dev (seemed to be in the up and coming, eager to learn but not experienced stage of being a ROM developer): Octagon ROM
The next ROMs I'm going to mention I can't recommend in good confidence not just they're now slightly out of date, but because they seemed to have a few bugs, but more so the developer doesn't do much to instill my confidence in their knowledge base when it comes to developing ROMs for android. Also they're not really custom ROMs more than they're just the stock ROM with themes and skins applied, as opposed to any real under-the-hood performance improvements: Everything Google ROM; the previous ROM with a Marshmallow skin; and Android 5.0 Lollipop Material Design -{theme}-
Finally the CyanogenMod thread I mentioned, even though as I said, you will be disappointed if you insist on downloading anything to try it out: http://forum.xda-developers.com/tab-4/general/dev-cm12-1-t230-nu-development-thread-t3190971
One last thing before I go, in case you haven't found the custom recovery you need, you have three (although the first two are more recommended) choices: an older version of TWRP which I can guarantee will work: http://forum.xda-developers.com/tab-4/general/root-galaxy-tab-4-7-t230-t2835264
Or a newer version of TWRP which should work for your device but I cannot personally guarantee that (click the link that says twrp-3.0.0.0-degas-160207-0212): http://forum.xda-developers.com/tab-4/development/recovery-twrp-2-8-1-0-samsung-galaxy-t2922795
Regarding that newer TWRP, I'm pretty sure I've seen posts confirming it works for your device but I can't recall for sure and I personally installed the first (older version) on a friend's SM-T230NU, so your call. If you have a strong personal preference for CWM as opposed to TWRP, you can try the following recovery, but it's not actively maintained any longer, so be warned. Although to be fair, it works fine as far as I can tell, so again your call: http://forum.xda-developers.com/tab-4/development/recovery-philz-smnu-t2980094
thisisapoorusernamechoice said:
It sounds like you were asking about custom ROMs, as opposed to keeping official firmware up to date which is what BXA is talking about. For the record, instead of installing an extra app just to keep up to date on official firmware releases, you can always check my threads which I keep up to date on official firmware releases for all Tab 4 variants:
--Official Tab 4 KitKat Firmware thread
--Official Tab 4 Lollipop Firmware Thread
Assuming you were inquiring about custom ROMs, below is a list of the most popular and/or well-maintained ROMs that will work for your device (pro-tip, even if the ROM says it's only for the SM-T230, it will work on your device, but you probably will lose IR blaster functionality). Before you ask, there are no viable CyanogenMod-based or even AOSP-based ROMs for this device (or SM-T230). They tried to get CyanogenMod working for your device, but as of right now the available builds either don't boot entirely or boot but have bugs like Wi-Fi not working. I'll link to the thread with the relevant info and downloads, but don't expect much, certainly nothing stable enough for daily use. The list I promised you:
--Acheron ROM (well maintained, popular, great dev to interact with, and even though I don't own your device, my recommended starting point)
--Prism Barebones (unfortunately apparently no-longer maintained, but still a solid, popular ROM by a well-respected dev, a legit alternative to Acheron)
--TranchidaKat (seemed to be gaining in popularity, unfortunately the dev recently took a break from maintenance)
--T230 Smooth ROM (I don't really know much about this ROM, but from what I can tell it seems/seemed reasonably popular)
There are a couple more ROMs I feel reluctant even mentioning, and can't really recommend with any sort of confidence. The first had an OK dev (seemed to be in the up and coming, eager to learn but not experienced stage of being a ROM developer): Octagon ROM
The next ROMs I'm going to mention I can't recommend in good confidence not just they're now slightly out of date, but because they seemed to have a few bugs, but more so the developer doesn't do much to instill my confidence in their knowledge base when it comes to developing ROMs for android. Also they're not really custom ROMs more than they're just the stock ROM with themes and skins applied, as opposed to any real under-the-hood performance improvements: Everything Google ROM; the previous ROM with a Marshmallow skin; and Android 5.0 Lollipop Material Design -{theme}-
Finally the CyanogenMod thread I mentioned, even though as I said, you will be disappointed if you insist on downloading anything to try it out: http://forum.xda-developers.com/tab-4/general/dev-cm12-1-t230-nu-development-thread-t3190971
One last thing before I go, in case you haven't found the custom recovery you need, you have three (although the first two are more recommended) choices: an older version of TWRP which I can guarantee will work: http://forum.xda-developers.com/tab-4/general/root-galaxy-tab-4-7-t230-t2835264
Or a newer version of TWRP which should work for your device but I cannot personally guarantee that (click the link that says twrp-3.0.0.0-degas-160207-0212): http://forum.xda-developers.com/tab-4/development/recovery-twrp-2-8-1-0-samsung-galaxy-t2922795
Regarding that newer TWRP, I'm pretty sure I've seen posts confirming it works for your device but I can't recall for sure and I personally installed the first (older version) on a friend's SM-T230NU, so your call. If you have a strong personal preference for CWM as opposed to TWRP, you can try the following recovery, but it's not actively maintained any longer, so be warned. Although to be fair, it works fine as far as I can tell, so again your call: http://forum.xda-developers.com/tab-4/development/recovery-philz-smnu-t2980094
Click to expand...
Click to collapse
Many thanks for the tips
Btw, your links are great.. and can be downloaded VERY FAST
have a nice day

Which custom ROM to use on a Canadian SM-G920W8 model

If this post or just part of it was usefull to you, please give a thank you, it's just one click below this post and encourages authors to keep their threads up to date.
What is this thread for?
To all those wondering what to install on their old Samsung Galaxy S6, abreviated "S6". This thread will tell you what you need to know concerning available ROMS for the Canadian W8 model of the S6.
There are 5 major guests in the Samsung Galaxy S6 Android world:
Versions 5.x.x named Lollipop abreviated "LL"
Versions 6.x.x named Marshmallow abreviated "MM"
Versions 7.x.x named Nougat abreviated "NG"
Versions 8.x.x named Oreo abreviated "O"
Versions 9.x.x named Pie abreviated "P"
Versions 10.x.x named 10 abreviated 10
Basic things you must know:
Stock ROMs which are kept as is with only deknoxed but still stock won't show you much besides keeping your phone as it is with the freedom of installing what you want.
AOSP ROMs are usually the most debloated ones and best ones. LineageOS IS an AOSP based ROM.
Debloated ROMs: There seems to be a lot of different levels of debloating. High, Partial, Light. When using a Custom ROM, you usually want to remove most of the stock stuff and install the things you desire after. But in this ROM world, when debloating, authors often rebloat them with some of their prefered apps and mods. So Debloated ROMs are mainly to say that stock apps were removed.
Kernels are not ROMs, just saying AND, they need to be installed with the PROPER version of the ROM you are installing AND must fit AOSP or Stock because they will not work and you will get bootloop.
Aroma installer which permit to choose options during the ROM's installation. These take soo much space and are huge files to download. They boost the ROM's file size. Of course, you can choose what you want during the install process, but most ROMs are over 1Gb in size which is enormous while a non-aroma file can be way under 700Mb and do the job perfectly.
LL (v5.x.x):
These are just old, your cell phone can handle much more up to date roms AND stock roms are already way passed these versions.
MM (v6.x.x):
If you need well working, functional and complete ROMs, there's a few of these which have been tested and work very well. I'd go back without hesitating if I were not too greedy on later versions,
NG (v7.x.x):
There has been a lot of apps and mods that have been made stable from NG ROMs. A system on this would be considered a good in-the-middle installation. Not too old but not too young. There is also a custom framework app out there permitting some nice handling and modding that is considered stable for this version of Android. BUT, there's a bit BUT here. There is v7.0 and 7.1.x. 7.1.x seem to have audio issues, at least, the AOSP ROMs I tested.
0 (v8.x.x):
OK! I have read sooo many articles concerning battey problems in this ROM and I have also lived the battery problem myself with a custom ROM in this version. Oreo would be the system which crosses the line between old and new, merging from MM and NG to PIE.
P (v9.x.x):
Well, you are now up to date. BUT, We are now going well over S10 models of the Samsung Galaxy nowdays so a ROM in this version working bugfree is a bit of a dream, at least, for now. Problem encountered from these ROMs are audio, camera and wifi. Camera app is just nonesense with very poor audio quality. Users talk about bluetooth audio problems and echos during calls. Frequent application crashes notably when using camera, for example in messenger. BUT, the good is a cleaned up interface with a nice fresh modern feel.
10 (10.x.x):
Please refer to Pie (v9.x.x). Pretty much the same things happen.
I decided to give you a list of ROMS I have tested and believe should still stay alive for those questionning what the best ROM is for your needs or dreams.
Links to my suggested custom ROMs:
LL (5.x.x):
• None (just don't install any of these, too old)
MM (6.x.x): Only one stands out which I used for years and has a very nice position in recommended mods.
• XtreStoLite 3.3.1: https://forum.xda-developers.com/ga...xtrestolite-deodexed-mod-edition-1-0-t3094423
XtreStoLite has made me happy for years. If you want a stable ROM with what the S6 looked like during it's glorious days, that's the ROM to install.
NG (7.x.x): Most of these ROMs seem to be stock ROMs with not so much debloation so huge file sizes and Samsung's connection wizard AND all the Google Apps you did not ask for. I fell on 1 which boasts being HIGHLY debloated.
• OdexLite 4.2: https://forum.xda-developers.com/ga...rom-odexlite-rom-920f-920i-925f-925i-t3550706
If you do not install any of the Samsung or Google apps in the aroma installer, this is a highly debloated rom. I'm mentionning it here because I managed to instal it once but not a second time. Some users have reported a boot loop which makes the ROM below pretty much safe for install compared to this one. Because of a first successfull try, I still list it here, but I suggest Ultimate Nougat below. If you want to try and have time, then I suggest to try OdexLite if you are willing to test out and see for yourself.
• UlTiMaTe NouGat V3.1:https://forum.xda-developers.com/ga...elopment/rom-ultimate-nougat-s8-port-t3681259
I managed to make it work after wating for about 15 minutes for my phone to boot initially. It is not as much debloated as OdexLite but is a bit more flexible for adblock and Magisk since you are offered to install or not in the Aroma Installer. This actually is a flaw I found in OdexLite where some applications detect Magisk and AdBlock so they make certain options unavailable. With this version, you can install AdBlock and Magisk after and get apps to work flawlessly. System is stable and a good solution if you want, what I consider, a semi-debloated acceptable ROM. Many users also mentioned that mobile and LTE networks work flawlessly with this ROM.
O (8.x.x): None (I just di not try any of them after my battery problem)
P (9.x.x): 2 Came out of the lot and work strait out of the box. OK, WORK is a big word here, be prepared for a few issues. BUT, battery life is good, not too many apps and some fun customized options.
• LineageOS 16.0: https://forum.xda-developers.com/ga...opment/rom-unofficial-lineageos-16-0-t3880888
Used it for a few months without major issues besides the common Pie ROM issues notably camera and audio issues and some WiFi problems.
• ViperOS 6.3: https://forum.xda-developers.com/ga...elopment/rom-unofficial-viperos-v6-3-t3921301
I was pretty surprised by this ROM. It's basically Lineage OS 16 with extra Viper mods for extra customizations and configuration with, as a user stated, the extra no audio during calls problem. I still consider the Viper addons as bloatware but at least, there's no Samsung apps.
10 (10.x.x): I stopped at Pie. Same issues when reading the ROM threads so I have not even tried any of them because I overuse camera and video calls, who doesn't during COVID-19?
Recommended and usefull apps:
AdAway: https://f-droid.org/packages/org.adaway/
Removes many inapp ads, not those in full screen, but removes lotsand most of them.
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Adds root access to your apps if you don't have it pre-enabled in your ROM
OpenGApps: https://opengapps.org/
Installs Google Play and other Google stuff on your phone
Xposed Framework: https://forum.xda-developers.com/showthread.php?p=58828974#post58828974
Adds numourous other possibilities to customize your phone. NOTE: Please allow an extra boot time after installation.
Xposed Modules: https://forum.xda-developers.com/xposed/modules
Launchers and other apps:
Launchers will give more style to your phone. From changing icon size to drawer's background color, you may want to have a look at launchers for a more customized experience. 2 Launchers held my attention. There's not too many out there that are worth the download even with an above 4/5 star rating. Some of them even show ads which is ridiculous for a launcher as you will see ads popup just in the middle of nowhere.
Microsoft Launcher: My prefered launcher. Has everything you need, notifiction dots, decent customizations and works with icon packs. It lacks a few customizations such as folder colors and opacity, but that left asside, I still think it is the best out of all of them considering that it is totally FREE.
Nova Launcher: The only problem with THIS launcher is that you need the paid version to enable notification badges on your icons.
Evie Launcher: Well it's one or the other, Nova permits lots of customizations with background colors but no badges. Evie permits badges but no background colors or status bar customizations. But, very fast and simple.
MX Player: I've tested a few, one of the best. Reads almost anything, fast and highly customizable. Some may say VLC would be nice but VLC showed a few lags here and there and ended up not reading some files MX read OR had more time with videos accros the network, MX Player does a very nice job.
Options you may want to change:
Enable programmer's options and disable all animations for a faster response time in apps.
Enable USB Debugging and set USB mode to File Transfer or Media Transfer Protocol.
Final Notes: I love the Pie experience but I had to resigne and go back to Nougat for stability and the camera which I use very often. It took me a while to find a reasonable Nougat ROM because I was going to resigne and go back to XtreStoLite. If you plan on testing, Facebook and Google accounts are your best friends to save your stuff so you don't need to restart your games or retype your contacts.
The chosen one: ULTIMATE NOUGAT
I hope this will help people make a choice on what to install for Canadian W8 phones. Do not hesitate to post your comments on your experiences and if you have suggestions or more information on tests you did with other ROMs not mentionned here.
Additional Bloatware you may not need
Now this is for modders who may come upon some bloatwares installed. When installing Ultimate Nougat, I decided to uninstall apps I do not use and found combersome and irritating for me. Here is the list of package names that can be removed which include App Lock, Weather and other widgets. If you are not sure of what you are doing, please do a Google Search on the package names to make sure you are uninstalling something you really do not need. In my case, I chose to uninstall these packages. You may want to get a package name virwer to know where these have been installed to remove them.
I use Total Commander with root permissions and I delete them. When I delete these packages, the phone boots properly and I get no messages or service stopping errors so I consider this my safe to remove list.
List of packages that I removed in the "system" folder (you need root permissions or use TWRP to delete):
Spoiler: KNOX
app/KNOXStub
app/KNOXStore
app/KnoxAttestationAgent
app/KNOXAgent
app/KLMSAgent
app/ContainerAgent
app/ContainerEventsRelayManager
app/KnoxFolderContainer2
app/KnoxRemoteContentsProvider
app/KnoxAppsUpdateAgent
app/KnoxFolderContainer
app/KnoxSetupWizardClient
app/KnoxSwitcher
app/MyKNOXSetupWizard
app/KnoxMigrationAgent
app/KnoxSetupWizardStub
app/SamsungDLPService
app/BBCAgent
app/SecurityLogAgent
priv-app/MyKNOXSetupWizard
priv-app/KLMSAgent
priv-app/SPDClient
priv-app/SKMSAgent
container
tima_measurement_info
framework/knoxsdk.jar
framework/knoxvpnuidtag.jar
etc/secure_storage/com.sec.knox.store
etc/secure_storage/com.sec.knox.store!dex
Spoiler: AUDIO
media\audio\ringtones\A_Rustling_in_the_Trees.ogg
media\audio\ringtones\Basic_Bell.ogg
media\audio\ringtones\Basic_Tone.ogg
media\audio\ringtones\Beep_Once.ogg
media\audio\ringtones\Beginning.ogg
media\audio\ringtones\Bunny_Hopping.ogg
media\audio\ringtones\Chimes.ogg
media\audio\ringtones\Crossing_a_River.ogg
media\audio\ringtones\Dance_Party.ogg
media\audio\ringtones\Day_by_Day.ogg
media\audio\ringtones\Drifting_Downstream.ogg
media\audio\ringtones\Ecliptic.ogg
media\audio\ringtones\First_Light.ogg
media\audio\ringtones\Fresh_Morning.ogg
media\audio\ringtones\Mystic_Tone.ogg
media\audio\ringtones\Ocean_Voyage.ogg
media\audio\ringtones\One_Step_Forward.ogg
media\audio\ringtones\Prelude.ogg
media\audio\ringtones\Scampering_Tone.ogg
media\audio\ringtones\Somewhere.ogg
media\audio\ringtones\Ticktac.ogg
media\audio\ringtones\Warm_Greetings.ogg
media\audio\notifications\Beep_Once.ogg
media\audio\notifications\Good_Time.ogg
media\audio\notifications\Run.ogg
media\audio\notifications\S_Harmonics.ogg
media\audio\notifications\S_Opener.ogg
media\audio\notifications\S_Temple_Bell.ogg
media\audio\notifications\Sweet_Favour.ogg
media\audio\notifications\Whisper.ogg
media\audio\notifications\Hello.ogg
media\audio\notifications\Peanut.ogg
media\audio\notifications\S_Bubbles.ogg
media\audio\notifications\S_Charming_Bell.ogg
media\audio\notifications\S_Dew_drops.ogg
media\audio\notifications\S_Knock.ogg
media\audio\notifications\S_Tickety_Tock.ogg
Spoiler: SAMSUNG
app/SamsungSans
app/VirtualTour_N_OS
app/VideoTrimmer_Dream
app/VideoEditorLite_Dream_N
app/VideoCollage_Grace_N
app/SlowMotion_Dream_N
app/EasterEgg
app/EasyOneHand3
app/GameOptimizer
app/WallpaperBackup
app/Weather2017_SE
app/WeatherWidget2017_SE
app/SmartRemote_zero
app/SmartSwitchAgent
app/SecFactoryPhoneTest
app/SecurityProviderSEC
app/STalkback
app/OneNote_Compact_Samsung
app/GearManagerStub
app/SecMemo3
app/AllshareFileShare
app/AllshareMediaShare
app/SBrowser_5.0
app/SPrintSpooler7
app/CloudGateway2017
priv-app/DiagMonAgent
priv-app/GalaxyAppsWidget_Phone
priv-app/SamsungPayStub
priv-app/SamsungBilling
priv-app/GalaxyApps_3xh
priv-app/GalaxyCare
priv-app/GalaxyThemes
priv-app/PowerPoint_SamsungStub
priv-app/SamsungAccount_Dream
priv-app/SamsungCloud
priv-app/HealthService
priv-app/LegacySmartManagerProvider
priv-app/SamsungPass_1.1
priv-app/VoiceNote_5.0
priv-app/Word_SamsungStub
priv-app/ThemeCenter
priv-app/SecLiveWallpapersPicker
priv-app/SHealth5
priv-app/SmartManager_v5
priv-app/SmartManager_v5_DeviceSecurity
priv-app/EasyLauncher2_Zero
priv-app/SVoicePLM
priv-app/SVoiceLang_EnglishPack_US_1.0
priv-app/SVoiceLang_FrenchPack_1.0
priv-app/SamsungMagnifier3
priv-app/SecEmail_N
priv-app/SecureFolderStub
priv-app/EasySetup
priv-app/GameHome
priv-app/GameTools
priv-app/OneDrive_Samsung_v2
etc/sysconfig/samsungaccount.xml
etc/sysconfig/samsungauthframework.xml
etc/sysconfig/samsungemail.xml
etc/sysconfig/samsungfidouafasm.xml
etc/sysconfig/samsungfidouafclient.xml
etc/sysconfig/samsungpushservice.xml
framework/gamemanager.jar
I just picked up a used SM-G920W8 as a backup until I get my Pixel 2 XL back. I plan to keep it as a backup phone but also as a music player for around the house, on trips and at the gym. The battery life is pretty poor!
I was hoping to put a custom ROM and was wondering if you'd be able to give me some guidance. So many posts on this forum are from 3 years ago and I'm not sure what is valid anymore. After seeing your post, and thank you, I would suspect you have a good deal of experience with this Canadian version of the S6.
My questions are:
What is the process to get TWRP on my device?
Can any of the other ROMs you tried but didn't run be made to work if we flash a custom kernel after flashing the ROM?
In your OP the problems you say you have, are those with your current Unofficial Lineage ROM? I'd hate to have the camera issues.
Thanks in advance.
Installing TWRP with ODIN
blyndfyre said:
I just picked up a used SM-G920W8 as a backup until I get my Pixel 2 XL back. I plan to keep it as a backup phone but also as a music player for around the house, on trips and at the gym. The battery life is pretty poor!
I was hoping to put a custom ROM and was wondering if you'd be able to give me some guidance. So many posts on this forum are from 3 years ago and I'm not sure what is valid anymore. After seeing your post, and thank you, I would suspect you have a good deal of experience with this Canadian version of the S6.
My questions are:
What is the process to get TWRP on my device?
Can any of the other ROMs you tried but didn't run be made to work if we flash a custom kernel after flashing the ROM?
In your OP the problems you say you have, are those with your current Unofficial Lineage ROM? I'd hate to have the camera issues.
Thanks in advance.
Click to expand...
Click to collapse
A simple Google search makes it easy to find but, having a thread like this one , I believe that your questions are relevant. So...
Question #1 (getting TWRP on your phone): 2 links to start with ODIN to make the flash and TWRP, the thing you need to install:
ODIN (remove spaces in the following link): ww w.droid views.com/download-odin-tool-for-samsung-galaxy-devices-all-versions/
TWRP: https://twrp.me/samsung/samsunggalaxys6.html
Follow the instructions on the ODIN website. ODIN is used to flash your phone to have TWRP installed. Also note that this process is pretty critical as it can brick your phone so be carefull and follow the instruction properly. I have flashed TWRP a few times without any problems on my side.
Question #2 (Installing a custom kernel):
I have not tried this and did not adventure myself into installing any such thing. I tend to stick with original stuff to make sure to not brick my phone. AND seeing that many custom ROMS for Pie are not out yet and also seeing the battery problem with OREO, this simply means that noone has ever found anything stable yet for this device. I don't believe that installing another kernel may make things work better. But this is just an opinion and since I did not try any custom kernel, I don't believe to have the best answer for you concerning this.
Question #3 (Camera issues with custom ROM):
Samsung Galaxy S6 is made to work with Marshmallow abreviated as MM in certain threads and posts. So anything after MM is a risk, stable or not. I had XtreStoLite for many years and I had absolutely no problems until some apps just said that MM was not supported anymore. That's pretty much the only reason I decided to install something new. I also noticed that Nougat is still very popular but have not found any Nougat ROMS that were not too heavy or simply unavailable for my Canadian phone. But, if you install any MM ROMS, your are mostly not going to have any problems. You could try OREO roms and fall in luck and find someone that figured out how to elliminate the battery issue but in my case, I tend to stick myself to the latest ROMS and live temporarly with my problems until an update fixes it as I don't have too much stuff on my phone that makes me take the reinstallation as a waste of time. I can install over 15 custom ROMS in one day while only 3 or 4 Windows during the same period, I believe that trial and error in this case is worth it. There are few stable builds that correspond to my criterias which are very few custom apps and lightweight that are less than 650 mb ROMS. Most roms go over 2 Gb while som maintain between 1.2 to 1.7 gb which I find pretty huge to my opinion seeing I can get a fully working rom for 550 mb.
I hope this helps a bit. I'm not one of those geeky people with all the technological knowledge to explain or understand the nuances of kernels and roms. I'm not a developper nor a ROM creator myself so just following the installation processes proposed makes me a simple user. I applaud those creating custom kernels and roms from scratch with nothing but their knowledge without any installation instructions until they figure out by themselves how to explain their procedures, these people are the real fun guys or girls that make us use our phone to their outmost potential without any controls giving us the freedom to use the full unlimited functionalities of our android phones.
Just so you are aware the Canadian s6 is the same as the T-Mobile version, so any separate Rom download or fixes for the T-Mobile s6 apply. Any Oreo or Pie rom will have custom kernel prepackaged, as Samsung never released those on this device.
@Rouwdyboy Well that's a very constructive comment. Thank you, this may open up some possibilities and other tests on my side once I get some time again. Thank you for your comment!
@green3water5 how did you get a Canadian S6 to work? Wow!
Other than my S6 being edge, my SM-G925W8 installs LineageOS 16.1 fine but there is no cellular data at all. Calls go through but there's no sound...
I have a suspicion that the installer installs the zeroltexx version of the ROM which is causing the issue.
I guess the only thing that can differ from my installation to yours is Twrp, so which version of Twrp do you use?
Thanks (in advance)
Jeffreyyou said:
@green3water5 how did you get a Canadian S6 to work? Wow!
Other than my S6 being edge, my SM-G925W8 installs LineageOS 16.1 fine but there is no cellular data at all. Calls go through but there's no sound...
I have a suspicion that the installer installs the zeroltexx version of the ROM which is causing the issue.
I guess the only thing that can differ from my installation to yours is Twrp, so which version of Twrp do you use?
Thanks (in advance)
Click to expand...
Click to collapse
I have to admit that I do not use my cell phone using cellular data. I constantly need wifi to use GS Wave for VoIP calls. I have not tested cellular data but I do know that MOST Pie ROMS have sound issues and some Nougat ROMS also. The sound issue is pretty redundant but in my case, using GS Wave, I do not encounter those bugs. The only problem I encounter, I have already mentionned above, BUT, I have updated my first post to warn people of possible sound problems when using cellular data. I'm sorry that I'm not of big use for your problem but thank you for your reply!
I have updated my tests and added my point of view on ViperOS.
Calls
I have no sound in phone calls, everything else is working fine.
i tried to see if there was something like "persist.vendor.audio.fluence.voicecall=true" in the build prop to edit, hoping to fix the issue.
After testing out and other numourouse trials and errors. Here's my new comments on ROMs for G920W8 models. Hope this helps. I rewrote the entire thread content for clearer explanations.
Jeffreyyou said:
@green3water5 how did you get a Canadian S6 to work? Wow!
Other than my S6 being edge, my SM-G925W8 installs LineageOS 16.1 fine but there is no cellular data at all. Calls go through but there's no sound...
I have a suspicion that the installer installs the zeroltexx version of the ROM which is causing the issue.
I guess the only thing that can differ from my installation to yours is Twrp, so which version of Twrp do you use?
Thanks (in advance)
Click to expand...
Click to collapse
I have the exact same problem as you do. I tried many roms and so far, none kept the data ON execpt Resurrection Remix 7 (zerofltecan) for about... 3 hours.
But, when I go back to stock, mobile data comes back.
@green3water5 I sent you a private message AND THEN found that thread. Sorry to have bothered you, will keep writing in here
coolmat said:
I have the exact same problem as you do. I tried many roms and so far, none kept the data ON execpt Resurrection Remix 7 (zerofltecan) for about... 3 hours.
But, when I go back to stock, mobile data comes back.
@green3water5 I sent you a private message AND THEN found that thread. Sorry to have bothered you, will keep writing in here
Click to expand...
Click to collapse
That's why I chose to use OdexLite which is a Nougat based ROM. Oreo and Pie seem to be too recent to have perfect functionalities seeing that S6 is way outdated today. So seeing Pie ROMS work seems, for now at least, a bit more dreamy than reality. Nougat has passed pretty much all possible tests and seeing most of them being abandonned by their authors, I think that most problems may have been resolved and that other issues which may raise are probably corrected with Oreo and Pie ROMs. But again, I do not use cellular lines as I use voip through wifi connections so I cannot suggest anything more than my experience as a computer technician concerning roms and softwares installed on old systems. We are now at the S10 phone, 4 versions higher with Pie starting to be the default system sold on recent phones.
My experience so far with OdexLite without cellular data: I have nothing but good to say. I've had no camera issues, no sound issues, no wifi issues and no problems installing anything I wanted. Up to now, it's the best and most stable ROM I've installed after XtreStoLite. Of course there are small things that I liked in Pie like theme changes and some keyboard changes but nothing compared to how fluid and stable the system is compared to Oreo and Pie ROMs I had tested.
And I am not bothered by any messages. Thank you for your usefull comment.
green3water5 said:
That's why I chose to use OdexLite which is a Nougat based ROM. Oreo and Pie seem to be too recent to have perfect functionalities seeing that S6 is way outdated today. So seeing Pie ROMS work seems, for now at least, a bit more dreamy than reality. Nougat has passed pretty much all possible tests and seeing most of them being abandonned by their authors, I think that most problems may have been resolved and that other issues which may raise are probably corrected with Oreo and Pie ROMs. But again, I do not use cellular lines as I use voip through wifi connections so I cannot suggest anything more than my experience as a computer technician concerning roms and softwares installed on old systems. We are now at the S10 phone, 4 versions higher with Pie starting to be the default system sold on recent phones.
My experience so far with OdexLite without cellular data: I have nothing but good to say. I've had no camera issues, no sound issues, no wifi issues and no problems installing anything I wanted. Up to now, it's the best and most stable ROM I've installed after XtreStoLite. Of course there are small things that I liked in Pie like theme changes and some keyboard changes but nothing compared to how fluid and stable the system is compared to Oreo and Pie ROMs I had tested.
And I am not bothered by any messages. Thank you for your usefull comment.
Click to expand...
Click to collapse
I was not able to install OdexLite, it always bootloop, but I was able to install Ultimate Nougat and I can confirm that it's the first ROM that mobile data works. So what I deduct is that Canadian providers locked mobile data (LTE) to Android 7 (Nougat) for SM-G920W8. I can't remember where I read that before, but it's not the first time I see that people had to update in order to get mobile data for it to work.
Sadness...
@coolmat Thank you for this very usefull comment. Even though I do not really understand why you get a bootloop with OdexLite, you still managed to get a Nougat ROM to work. If this resolved your issue for LTE network, I glad that Ultimate Nougat worked for you. And I think we just need to be patient and wait until there is more serious work for Pie ROMs until someone finds out how to resolve the network and other issues we have.
Added Ultimate Nougat in the list of Tested Nougat ROMs. Thanks to @coolmat for this little info. Tried the installation another time and rom worked.
**EDIT: I'm editing this because some people might not scroll more... Don't install this ROM. As green3water5 stated (below) it is in beta and after further testing, there's a big issue where rebooting kills it.
Guys, I just found the BEST ROM for the SM-G925W8! It's Android PIE and mobile data WORKS REALLY WELL!!!. (When you install, install the "US Variant")
This ROM is faster than all the other PIE, OREO, NOUGAT, and STOCK! It's faster than my S8 lol.
**MiUi camera, don't use stock
The ROM is also for the Note 5 and other S6 variants, hence 2GB size.
https://forum.xda-developers.com/note5/development/rom-floyd-n7fe-port-v1-0-t3882804
JeffYou said:
Guys, I just found the BEST ROM for the SM-G925W8! It's Android PIE and mobile data WORKS REALLY WELL!!!. (When you install, install the "US Variant")
This ROM is faster than all the other PIE, OREO, NOUGAT, and STOCK! It's faster than my S8 lol. This ROM gets an A+ (or as we Ontarians say "level 4+")
**MiUi camera, don't use stock
The ROM is also for the Note 5 and other S6 variants, hence 2GB size.
https://forum.xda-developers.com/note5/development/rom-floyd-n7fe-port-v1-0-t3882804
Click to expand...
Click to collapse
It states that the ROM is under Beta. Did you compare the sound recording of tha camera compared to the other ROMS I listed. Does the camera work flawlessly with Facebook Messenger and other apps asking for camera?
green3water5 said:
It states that the ROM is under Beta. Did you compare the sound recording of tha camera compared to the other ROMS I listed. Does the camera work flawlessly with Facebook Messenger and other apps asking for camera?
Click to expand...
Click to collapse
Sorry, my bad. Don't install the ROM. I used it all night and it worked great but if you boot it the second time, it will shutdown/reboot right after booting into the OS ( kind-of like a bootloop(?) ).
Did not work on SM-G920W8...
coolmat said:
I was not able to install OdexLite, it always bootloop, but I was able to install Ultimate Nougat and I can confirm that it's the first ROM that mobile data works. So what I deduct is that Canadian providers locked mobile data (LTE) to Android 7 (Nougat) for SM-G920W8. I can't remember where I read that before, but it's not the first time I see that people had to update in order to get mobile data for it to work.
Sadness...
Click to expand...
Click to collapse
Same here...

[ROM][6.01][STABLE][G532XX]EnigmaNL Port/ROM for J2 Prime

EnigmaNL Port​So I'm finally sharing this ROM lol.
A lot of the people that are in my Telegram group already knew about this ROM from long ago. I just felt lazy to upload it to xda. And now I feel bad about it xD
Man, this is the second time I am uploading old stuff that I shared on Telegram and not in XDA. Yikes.
I re-visited the Enigma ROM because I like its looks and features and went ahead and fixed a few things and added a few others
So, here's what you can look forward to with this ROM
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Features!​
Port between A7 and Enigma V6.1
Deodexed
Heavily debloated
Zipaligned
Very Optimized
Aroma installer
Multiple kernels
Modded Screen record
Floating Messages
Scroll Capture
Edge Panels
UI and Edge dynamic blur
Fixed Multi-window
Fixed radio
Infinite paid themes in Samsung Theme Store
ROM control filled with features
And stock J2 Prime stuff
Phoenix Kernel features:
Double tap to wake (thanks to @remilia15 for letting us kang *ahem* I mean see how it is implemented xD)
Multi-touch up to 10 finger detection
Our attempt at OC, too bad it's not that good
Scores high in Antutu scores xD
Bugs!​Custom kernel included has a few bugs. You can avoid these bugs by installing stock kernel included in Aroma, so you have been warned
Kernel dies when the phone turns off. Either by turning off manually or if the battery dies. This will make you stuck on Samsung splash screen. To fix this, boot to TWRP then select Reboot and then System. Easy fix.
If this does not work, the only way to recover your phone is by flashing stock via Odin
Changelog!​
24/07/19: Release
Links!​
Google Drive​
Instructions!​-Create full backup before trying
-Wipe data, cache and dalvik
-Flash through TWRP
-Make selections in Aroma
-Reboot
-Complete setup
Credits!​ @Allooosh98 For his great ROM (original creator)
@parth111999 For his great ROM (original creator)
@renoxtv For Phoenix kernel and adding all the features you could
@remilia15 For the idea of changing ART to interpret-only to allow us to have more space
@By Zonik for his amazing help and tutorials with ROM control and for letting me use SynexOS style for ROM Control
ROM control GitHub: [url]https://github.com/Zonik94/6thGear-RomControl-v2.0[/URL]
@Albe96 for all your help with teaching me on how to port. I know I must've bothered you countless of times, thank you for being such a cool dude!
@BlackMesa123 for his Nougat notification MOD in MM, looks great as always.
@ashyx for porting TWRP to our crappy device xd
@malbert16442 For his tutorial on ROM porting which you can find here: https://forum.xda-developers.com/an...to-samsung-t3481114/post69145910#post69145910
@SuperR. For his Super R's Kitchen which you can find here: https://forum.xda-developers.com/ap...dows-linux-superr-s-kitchen-v3-0-0-0-t3601702
@topjohnwu for Magisk
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
EnigmaNL for J2 Prime, ROM for the Samsung Galaxy J2
Contributors
ShaDisNX255
Source Code: [url]https://github.com/renoxtv/mt6735_grandpplte_new[/URL]
ROM OS Version: 6.0.x Marshmallow
Based On: Touchwiz
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-24
Created 2019-07-24
Last Updated 2019-07-24
How to report a bug/Ask for a change​
Over the small amount of time I've been doing my edits and shared them with the community, I've noticed something that seems to irritate me. I can't speak for all the developers on this forum, but I do edits/ROMs/PORTs/etc... to what I like. I don't work for anybody else but me. I share my work because it may have something of value to other people and/or some people may share the same taste as me on regards to what they want on a ROM.
That being said, that doesn't mean I will completely ignore what the community has to say.
First and foremost, it must be said, I am merely a beginner. I do not claim to be a professional developer that knows how to add everything, I am nowhere close and I learn as I go.
There are ways to ask for something and/or report a bug when it comes to ROMs, and this post is my attempt to try to explain how to (and how not to) report a bug in order to help me out as much as possible to try to fix something
You can also ask for something to be added, but there are also ways to ask for something
So, here we go
Keep in mind:
I do not add stuff that can easily be downloaded from the Playstore
I, myself, don't do kernel edits
I COULD remove stuff if NOBODY uses it
---REPORTING BUGS---​
How NOT to report a bug:
"SystemUI (or any app)is crashing, please help!"
"Instagram doesn't allow me to edit my post, what could be wrong?"
"My bank account app is not letting me do such thing"
These posts are sort of pointless as they only state something but I have no context on what could be causing it. Also, I can't really control (for the most part) third-party apps, so if you're going to ask about them this way, don't even bother
A slightly better way to report a bug:
"I clean installed the ROM and was working fine, after I installed Facebook and logged in, I immediately uploaded a photo and SystemUI started to crash. Can you look in to it?"
"I tried to install Black Neon theme (a link to it would work as well) and it was working fine until I tried to activate AOD (or anything else for some reason) and SystemUI (or any other app) is crashing, could you look in to it?"
"My bank account app doesn't let me take a screenshot of my accounts. I get a toast notification saying "Can't take screenshot due to security policy"
As you can see, this provides a bit more context and explanation on your current situation. This gives me a little more detail on trying to replicate the problem and hopefully could fix it by replicating it. Well, except for point #3 which is out of my hands for the most part (I think). If you include what kernel you're using would make everything better! Also any significant change that would require root (like xposed and or anything that modifies /system also needs to be informed for better results)
The BEST way to report a bug:
LOGCAT!!!!!!!!!!!!!!!!!!
Please learn the ins and outs of a logcat, this really helps a lot on finding what the problem is. Also, please give a brief explanation as the above examples when providing a log cat
---ASKING FOR STUFF TO BE ADDED---​
How NOT to ask for stuff:
On your next update, add iris scanner
You should add (app) on your next update
Hey, please add (app or feature) on your next update
No, I do not work for you. Even if you say please like the third example, that doesn't mean you're being polite. It still sounds like an order lol so you should probably rephrase your request.
How to ask for stuff to be added to my work:
Would you be so kind to add (feature) to your ROM, if possible?
Would it be possible to add this app to your ROM?
Please, can you add (feature) to your ROM, if it isn't much to ask?
See how politeness makes everything better? You're not demanding it, you're just politely asking to see if maybe it is within my grasp to add something. And if all request would be like this, I can assure you I'd try my best to add said feature
I hope this is useful to you or I at least hope that some people read it.
If not, I can just tell you to return to stock ROM, probably better than any ROM I put out anyway
Join our Telegram group​
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group
Android group in spanish
Link: Grupo Android​
FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of EnigmaNL again
[Q] My phone will still not boot, what is my last resort?
[A] Please do the following:
Re-install EnigmaNL
After installation finishes, select "Save Logs"
It will save a .txt file in your memory, please post so I can review your problem
[Q] I've found a bug, what should I do
[A] Please read the "Bugs" section of the thread to see if your bug has been reported, if it hasn't, please let me know exactly what the problem is so I can take a look
[Q] Something bothers me and I want it fixed/changed
[A] Please, kindly make a request and if it's within my grasp, I'll try to fix it. Just, don't be rude and demand something. Either that or return to stock, your choice
[Q] Games don't work on EnigmaNL
[A] Open Galaxy Store and update Game Optimizing Service and all Game related apps, then reboot and they should work again.
Enjoy!
Tested it on my G532M. I think that it's the best custom ROM available for this phone. Very fast, stable and with a lot of free space.
Hmm, link is broken bro?
E/Reply: nothing bro, just mentioning!~
Prove N. said:
Hmm, link is broken bro?
Click to expand...
Click to collapse
Updated, sorry
thank you brother. this is the best and fastest rom for j2 prime. thanks alot bro.
Do you still have any j2 prime rom that still haven't posted on xda and it's on your telegram group?
kawaiiperson12 said:
Do you still have any j2 prime rom that still haven't posted on xda and it's on your telegram group?
Click to expand...
Click to collapse
No, that's pretty much it. I have not worked on any other ROM.
This mod is better than the Hades!
100% Stable.
i'll edit if there's a problem
"ROM Installed Successfully "
Changed Status Bar Icon Colors on SyneXOS RC
All icons changed color but the notification icon is too dark and it doesn't change color at all.
and sometimes the Battery Percentage Color sometimes changes back to then instantly changes it to my seleceted color.
i tried to change color per icon then restart it
"I installed Extra Ordinary Ones but the app always stopped working if i open it, tried to uninstall it my storage still can't free up some space"
Storage Problem still not solved even in Custom ROM
LILY69 said:
"I installed Extra Ordinary Ones but the app always stopped working if i open it, tried to uninstall it my storage still can't free up some space"
Storage Problem still not solved even in Custom ROM
Click to expand...
Click to collapse
Of course it's not fixed. It will never be fixed by a custom ROM. The problem this device has in partitioning. It's got 3 GB reserved for system and out of those 3, this ROM only occupies 1.7.
That means that there is an unreachable 1 GB of storage.
Your data partition will always be the same. This device will always have storage problems. You can either buy a new device, use something like an adoptable storage or find an app that can move some of your apps to the system partition.
Oooh that sucks.:crying:
Thanks for replying!
the double tap to wake doesn't work on my phone and also what's better to use interpret only or just ART?
prettyMuchIt said:
the double tap to wake doesn't work on my phone and also what's better to use interpret only or just ART?
Click to expand...
Click to collapse
Use a kernel adiutor to activate double tap to wake
Interpret only for more storage and normal art for performance
ShaDisNX255 said:
Use a kernel adiutor to activate double tap to wake
Interpret only for more storage and normal art for performance
Click to expand...
Click to collapse
i downloaded the kernel adiutor now what do i do?
the Dolby makes my speakers sound like a vibrate thing.
i tried to install and play music with or without it
without Dolby is better.
or my speaker is damaged

Categories

Resources