Database Users

[Q] Help ! Stuck at Odin mode !

So i follow http://forum.xda-developers.com/xperia-l/development/rom-updated-ios7-extreme-edition-t2560915 to install a ROM then I realize that is a JB rom .
Now my phone stuck at Odin mode and could not do normal boot
Detail:
Could not do normal boot.
ODIN MODE
PRODUCT NAME : SM-N9005
CURRENT BINARY :Custom
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK (KK) : OFF
KNOX KERNEL LOCK : 0X0
KNOX WARRANTY VOID : 0X1
QUALCOM SECUREBOOT : ENABLE (CSB)
RP SWREV : S2,T2,R2,A3,P3
WIRTE PROTECTION : Enable
USC START
I tried restored my nanoid backup but it doesn't work , please help !

Problem solved
Solution : I use Odin to install stock firmware and everything works fine now

[Q] Firmware Problem !!!

Hi i got bootloop and i tried to flash it back so i flashed 4.4.2 fimware from sam-update
after i flash it done nothing appear it just appear logo and "recovery reboot" on the top
so i flash other 4.3 but it cannot flash "stuck"
CODE UNDER :
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY : SAMSUNG OFFICAIL
SYSTEM STATUS : OFFICAIL
QUALCOMM SECUREBOOT:ENABLE (CBS)
AP SWREV : S2, T2, A2, A2, P2
UDC START
SW REV CHECK FAIL : [SBL1] FUSED 2 > BINARY 1
ANY SOLOUTION

Abandoned War Place said:
Hi i got bootloop and i tried to flash it back so i flashed 4.4.2 fimware from sam-update
after i flash it done nothing appear it just appear logo and "recovery reboot" on the top
so i flash other 4.3 but it cannot flash "stuck"
CODE UNDER :
ODIN MODE
PRODUCT NAME: SM-G7102
CURRENT BINARY : SAMSUNG OFFICAIL
SYSTEM STATUS : OFFICAIL
QUALCOMM SECUREBOOT:ENABLE (CBS)
AP SWREV : S2, T2, A2, A2, P2
UDC START
SW REV CHECK FAIL : [SBL1] FUSED 2 > BINARY 1
ANY SOLOUTION
Click to expand...
Click to collapse
MY RECOVERY MOD ALSO FREEZE :crying:

if u flash 4.3 over 4.4.2 then your phone is dead. now u have to take it to a samsung care. thats the oly option you can do now.

Need urgent assistance on rooting galaxy s5 sm900f

WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:

When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting

Try turning of your reactivation lock.

Reactivation lock would be my guess. It stops a lot of people until they turn it off.

Can not flash SM-N910F (Deutsche Telekom) to original SW

Power+Home+Volume down shows :
Odin Mode
Product Name: SM-N910F
Current Binary: Custom
System Status: Custom
Reactivation Lock: off
Knox Waranty VOID : 0x1(4)
Qualcomm Secureboot: Enable (CSB)
Power+Home+Volume up NO MENU
I tried to update my device with kies
- bootloop recovery booting
I tried to update my device with Odin
- N910FXXS1CPC5_N910FDTM1COI1_N910FXXS1COK1_HOME.tar
- bootloop recovery booting
What can I do ?

NEED HELP! I may have bricked my J3, not sure what to do.

I can boot into download and recovery mode, but any time I attempt to boot into system I am met with this string of text on the top left:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-J327P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (0x30c)
QUALCOMM SECUREBOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
RP SWREV: K 0, S 0
SECURE DOWNLOAD: ENABLE
Can't get fdt
download mode ! !
This occurred after I was attempting to uninstall SuperSU and replace it with Magisk. Since then I have attempted to factory reset, to no avail. I cannot continue past this screen. Help please!

Shadeofdoom said:
I can boot into download and recovery mode, but any time I attempt to boot into system I am met with this string of text on the top left:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-J327P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (0x30c)
QUALCOMM SECUREBOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
RP SWREV: K 0, S 0
SECURE DOWNLOAD: ENABLE
Can't get fdt
download mode ! !
This occurred after I was attempting to uninstall SuperSU and replace it with Magisk. Since then I have attempted to factory reset, to no avail. I cannot continue past this screen. Help please!
Click to expand...
Click to collapse
Same here but I get the error you are leaving out for recovery.img also. Plus, my USB port is fried. Returns all 0000s for hardware IDs, 3 different cords, 3 machines. At least you have a chance to use recovery. I am totally ****ed.
So, that is ODIN/Download mode. I was high and trying to turn off debugging and switching my USB mode to charge only then doing the whole switch to Modem then back to AP and restart to fix the USB connection with my computer.
Know what I flipped? I'm pretty sure you did the same. I accidentally hit the OEM Unlock switch, turning it off, meaning I enabled OEM Lock. The error when you do a normal boot, not download mode (cuz thats what you posted) is "Custom binary blocked by FRP Lock" (boot.img)". Is your phone stolen or something? That why you left it out?
I got a ton of shady phones from shady mofos who ask me to fix them and then cant pay, but I bought this one new myself and know for sure its not. Releax, it doesn't mean its stolen. IN my case it means drugs are bad and Im dumb.