Hey there I have a Galaxy S5 that was running LineageOS, I started having some trouble recharging it, couldn't figure out if it was the battery or recharger.
I decided to leave it at a repair shop and afterwards buy a new battery from them. The first day it was working normally and I left it the whole day just recharging but then it started having some problems rebooting automatically. Now it keeps "rebooting" all the time which wasn't a problem with the old battery, the Galaxy S5 logo appears then it reboots and appears again etc.
I can't boot into recovery either but strangely enough I can get into download mode without it rebooting and it seems to work fine, even unplugged from any power source, this confuses me because I thought it was the battery.
Without being connected to a USB cable:
Power: Vibrates, Galaxy S5 logo appears, "recovery booting..." appears on top left, reboots immediately afterwards (doesn't enter recovery).
Volume UP + Home + Power: Vibrates, nothing appears on screen, slight flash on the screen as if it was damaged (but it isn't).
Volume DOWN + Home + Power: Boots into download mode absolutely fine, screen working 100%, doesn't reboot (can flash normally).
Being connected to a USB cable:
As soon as I connect it, the phone automatically tries to turn on as if I pressed the Power button ("recovery booting..." appears on top left), keeps rebooting as mentioned before, if I remove the battery while keeping it plugged in, it keeps doing the same thing but the Galaxy S5 Logo lasts longer on the screen and no "recovery booting..." appears on top left.
Volume UP + Home + Power: Same as just pressing Power mentioned before, keeps rebooting as mentioned but no slight flashes and screen works unlike when unplugged.
Volume DOWN + Home + Power: Boots into download mode absolutely fine, screen working 100%, doesn't reboot (can flash normally).
What I've tried so far:
Flash original ROM with Odin, flashed fine but still rebooting.
Flash TWRP on top of original ROM with Odin, flashed fine but still rebooting.
Flash "G900MUBU1BOE1_IUS1BOE1_v5.0_Repair_Firmware" along with the included .pit file, flashed fine but still rebooting.
Flash https://www.sammobile.com/samsung/galaxy-s5/firmware/SM-G900M/ZVV/download/G900MUBU1CPF2/88002/, flashed fine but still rebooting.
Flash "G900MUBU1BOK3", flashed fine but still rebooting.
Flash "G900MUBU1ANG3", flashed fine but still rebooting.
Download mode info:
ODIN MODE
PRODUCT NAME: SM-G90M
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): Off
KNOX WARRANTY VOID: 0x1 (2)
QUALCOMM SECUREBOOT: Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD: Enable
UDC START
Anyone knows what could be the cause? If more info is needed on model, battery etc let me know.
Thanks in advance.
Did you ever manage to fix this problem?
Im having the same drama... and im only a basic user looking to use the stock OS again.
cheers
blinky8u said:
Did you ever manage to fix this problem?
Im having the same drama... and im only a basic user looking to use the stock OS again.
cheers
Click to expand...
Click to collapse
No luck
Same problem here, with a G900I. No luck, I've tried two "4 file" repair firmwares with repartitioning and one stock single file, no luck either.
Related
I have an AT&T Galaxy S4. It is unlocked, but running stock 4.2.2 OS. It has run perfectly for 18 mos. It's never been wet; never suffered trauma. Today, for no apparent reason, it simply locked up. When I couldn't get it to respond after several minutes, I pulled the battery. That's when things got weird. From then on, every time I try to reboot, it gets about 3 or 4 seconds into the AT&T screen splash and then it freezes up. I tried to go into recovery (power + home + vol. up), but the screen says,
Could not do normal boot.
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: Samsung Official
CURRENT STATUS: Custom
CSB-OEM_CONFIG_LSB 0x30
WRITE PROTECTION: Enable
[PHOTO OF ANDROID DUDE]
Downloading...
Do not turn off target!!
Click to expand...
Click to collapse
Q. - What do I do from here?
If it won't even boot into recovery (to the point where you could install an update from zip), then what do I do? Plug it into PC, run ODIN and install a new OS?
The phone is in download mode. If it can stay in that mode, you can connect to PC and run Odin. http://forum.xda-developers.com/showthread.php?t=2926642
Hello Everyone,
I'm having an issue with my S7 Edge since yesterday. I was on playing some music when my phone suddently shuts itself off. Then it boot up only to be in the bootloop issue as mentioned. I tried going to Recovery Mode but volume up and power key didnt register however I am able to enter Download mode.
Now in download mode I see the following:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G935F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:2 K:0 S:0
About my phone, it is actually the black galaxy s7 edge duos (SM-G935FD) and running on Nougat. I'm not sure what version it was running on but when I first bought it 2 years ago, it was running on Marshmallow out of the box. I have never rooted the device nor flashed or installed any custom ROM. It was untouched but one time few months back it experienced boot-loop but was fixed when I entered recovery mode and wiped the cache. Only this time it isn't working.
Last night I tried to download 2 types of stock firmware from Sammobile for the SM-G935FD. Flashing it on Odin for both firmware worked but bootloop still exist. I still cant enter Recovery mode except Odin mode.
I don't even know where to begin.
Please help.
Dex
D-Hex said:
Hello Everyone,
I'm having an issue with my S7 Edge since yesterday. I was on playing some music when my phone suddently shuts itself off. Then it boot up only to be in the bootloop issue as mentioned. I tried going to Recovery Mode but volume up and power key didnt register however I am able to enter Download mode.
Now in download mode I see the following:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G935F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:2 K:0 S:0
About my phone, it is actually the black galaxy s7 edge duos (SM-G935FD) and running on Nougat. I'm not sure what version it was running on but when I first bought it 2 years ago, it was running on Marshmallow out of the box. I have never rooted the device nor flashed or installed any custom ROM. It was untouched but one time few months back it experienced boot-loop but was fixed when I entered recovery mode and wiped the cache. Only this time it isn't working.
Last night I tried to download 2 types of stock firmware from Sammobile for the SM-G935FD. Flashing it on Odin for both firmware worked but bootloop still exist. I still cant enter Recovery mode except Odin mode.
I don't even know where to begin.
Please help.
Dex
Click to expand...
Click to collapse
Just download latest firmware for your region through samfirm or updato/sammobile. Then use latest odin version from here https://forum.xda-developers.com/attachment.php?attachmentid=4431597&d=1519662712
Flash using normal csc, not home csc and you will be good. Don't tick auto reboot in odin options. Don't tick anything except F.Reset. After odin says flash is successful with a pass, disconnect usb and force restart from download mode by holding power+vol down+home when screen goes black immediately change from vol down to vol up key while still holding power+home keys. It will get you in recovery. If you are still unable to get in recovery then I guess you have faulty buttons or some other hardware problem.
Sent from my S7 Edge using XDA Labs
shah22 said:
Just download latest firmware for your region through samfirm or updato/sammobile. Then use latest odin version from here https://forum.xda-developers.com/attachment.php?attachmentid=4431597&d=1519662712
Flash using normal csc, not home csc and you will be good. Don't tick auto reboot in odin options. Don't tick anything except F.Reset. After odin says flash is successful with a pass, disconnect usb and force restart from download mode by holding power+vol down+home when screen goes black immediately change from vol down to vol up key while still holding power+home keys. It will get you in recovery. If you are still unable to get in recovery then I guess you have faulty buttons or some other hardware problem.
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
I reflashed according to the instruction, it still bootloops but now after the samsung screen it goes to the blue screen android screen with erasing then it loops back to samsung black screen. Can i try to flash it with PIT?
D-Hex said:
I reflashed according to the instruction, it still bootloops but now after the samsung screen it goes to the blue screen android screen with erasing then it loops back to samsung black screen. Can i try to flash it with PIT?
Click to expand...
Click to collapse
I won't recommend, do it on your own risk. Extract the normal csc file and there will be a pit file there.
Are there any error messages displayed in odin/phone?
Sent from my S7 Edge using XDA Labs
shah22 said:
I won't recommend, do it on your own risk. Extract the normal csc file and there will be a pit file there.
Are there any error messages displayed in odin/phone?
Sent from my S7 Edge using XDA Labs
Click to expand...
Click to collapse
None. It looks the same like the one on my first post.
D-Hex said:
None. It looks the same like the one on my first post.
Click to expand...
Click to collapse
ok weirdly enough the phone is working now after i left it to bootloop many times. thats weird. I'll try to observe the behaviour for now. I'll let you know whats next.
D-Hex said:
ok weirdly enough the phone is working now after i left it to bootloop many times. thats weird. I'll try to observe the behaviour for now. I'll let you know whats next.
Click to expand...
Click to collapse
Hello, what do you exactly mean by letting it bootloop for many times, i have exactly the same issue, when i flash with rom it just shows the blue erasing screen and then bootloops while beeing stuck in the samsung logo screen: do you mean i should try letting it for sometime there ?
xTweeBy said:
Hello, what do you exactly mean by letting it bootloop for many times, i have exactly the same issue, when i flash with rom it just shows the blue erasing screen and then bootloops while beeing stuck in the samsung logo screen: do you mean i should try letting it for sometime there ?
Click to expand...
Click to collapse
Yes, leave it to bootloop for a while. For me I'm not sure what really happened. I was fed up with the phone bootlooping even after trying to flash it with a stock firmware (latest version) from sammobile. What I did, I just threw the phone into the bag while bootlooping because I was in a hurry to go to work (Already given up hope). By the time, I reached office (approx. 30 minutes drive) I took out the phone only to find it on the initial setup screen like when you first bought it from the store and turning it on.
Just an update: My S7 Edge is still working with no issues of bootloop. Using it for playing games and other stuff. It's no longer my daily driver phone as I have switched to SG S9.
Hi, I'm new here so I don't know where to post stuff.
My S8 (SM-G950FD Android 9.0) suddenly stopped working. I was in my office and suddenly my phone rebooted and stuck on Samsung Galaxy S8 Boot screen.
Device Details:
Name: Samsung Galaxy S8
Model: SM-G950FD
Android version: 9.0
Security patch: I think I updated it to July patch not sure.
OEM Lock: On
FRP Lock: On
RP SWREV: B:5 K:4 S:4
Region: India (INS)
USB-Debugging: probably off not sure
Problem:
I'm not able to boot my phone.
1) Recovery Mode not accessible
2) Download mode is accessible
2.1) If I press volume up after pressing Bixby + v-down + power. The phone enters in download mode.
2.2) If I press volume down then it freezes. I have to use force restart using volume-down + power.
3) On Charging it just show a screen with a circle and power icon (no charging)
What I've tried till now.
1) Flashing with Odin. (not successful) the version used were 3.13.x where x = 1, 2, 3 and 3.12.3 as well.
2) I do have the right firmware from sam-mobile (although I tried multiple after it failed)
3) I have tried repartition, pit file (extracted from CSC) and also NAND-ERASE (Odin Always Fails).
4) Multiple data cables
5) I have the Driver installed as I can see COM ports.
6) I've tried spamming the start button of Odin once it fails and it reboots into download mode.
What I've succeeded in till now
Once I tried to flash the Stock Recovery which I extracted from the AP file from the firmware.
After countless failure, it flashed. ODIN said PASS.
So I connected my charger. This time I can see the percentage of battery (Still power off) then I powered it on.
it went past the Samsung galaxy s8 screen bt got stuck on Samsung (logo) the LED was blue.
and then again it went to its previous state.
P.S. I'll be glad If someone can help me out.
I thought of testing out different custom ROMS available for my device (Samsung A20 ) just to see what fits me, So I tried to flash a custom ROM "Havoc OS", right after flashing a ROM from XDA under my phone's section which is another custom ROM which i guess is ported from S20 " https://forum.xda-developers.com/galaxy-a20/development/ultimate-q-s20-v2-rom-t4104667 " and installed the ROM it worked fine, but after flashing Havoc OS, It boots up but the screen goes black after few seconds after displaying the Samsung logo... Knox... Powered by android and all that but goes off quickly and the black screen starts to appear, i tried holding down the power button and volume down together and also power button + volume up but nothing seems to work, i.e it won't get me into recovery or download mode. I tried using Odin while the phone is connected but even then it didn't show up on Odin's log as well. Please help :crying:
Update: The problem was fixed: I left the device to stay in the boot loop and the battery drained and then when I connected it to the power brick when the battery is completely drained i was able to boot into twrp recovery without a problem. ( Also i did this after removing the memory card )
https://forum.xda-developers.com/galaxy-a20/how-to/crash-recovery-t4068369
Hi , I've received phone from friend of mine to fix, after unsuccessful root , his phone get Samsung logo, and after a while it restarts and returns to the logo again, and so on in a loop. I can get Bixby, volume down and power to get to download mode. Tried to flash official firmware (AU Telstra, G950FXXSADTI1_G950FTELADTI1_TEL) using ODIN, goes OK , then restart to blue screen installing system update and goes to recovery mode. After restart from recovery mode it is back to the begging - endless loop. Try to install TWRP but phone doesn't want to accept. Info from download mode screen: model SM-G950F, FAP Lock OFF, OEM lock OFF, KG State: Prenormal, Current Binary: Samsung Official, Secured download Enabled, Warranty void 1 (0x030c) RP SWREV: B5 K4 S4, CCIC = S2MM005 hw:6 boot:7 main 43 .
Odin is responding to it. Any idea how to bring it back to life ? Something to do with Knox Guard state Prenormal ?
Thanks a lot
sbill said:
Hi , I've received phone from friend of mine to fix, after unsuccessful root , his phone get Samsung logo, and after a while it restarts and returns to the logo again, and so on in a loop. I can get Bixby, volume down and power to get to download mode. Tried to flash official firmware (AU Telstra, G950FXXSADTI1_G950FTELADTI1_TEL) using ODIN, goes OK , then restart to blue screen installing system update and goes to recovery mode. After restart from recovery mode it is back to the begging - endless loop. Try to install TWRP but phone doesn't want to accept. Info from download mode screen: model SM-G950F, FAP Lock OFF, OEM lock OFF, KG State: Prenormal, Current Binary: Samsung Official, Secured download Enabled, Warranty void 1 (0x030c) RP SWREV: B5 K4 S4, CCIC = S2MM005 hw:6 boot:7 main 43 .
Odin is responding to it. Any idea how to bring it back to life ? Something to do with Knox Guard state Prenormal ?
Thanks a lot
Click to expand...
Click to collapse
What happens when you try to flash twrp? Post logs here.
Try to factory reset from recovery after flashing.
Also make sure to flash the latest firmware