hi as previously discussed in earlier post I cannot get the s7 edge to start up after I transferred all my stuff to note 9 , I wiped everything off using android recovery when phone has battery it will try start with Samsung logo flashing in and out that's all I get on the android recovery screen it says fail to open recovery no such file or directory ps I can only get it to go into recovery screen when it has no battery and cable is in charging
I had a reply saying put a stock rom on it and its easy , but looking at some of them I understand Brexit easier than this is there an easy way to do this and maybe a you tube video I could follow any help would be so good thx for reading ps im a real novice
kiltedscotsman1964 said:
hi as previously discussed in earlier post I cannot get the s7 edge to start up after I transferred all my stuff to note 9 , I wiped everything off using android recovery when phone has battery it will try start with Samsung logo flashing in and out that's all I get on the android recovery screen it says fail to open recovery no such file or directory ps I can only get it to go into recovery screen when it has no battery and cable is in charging
I had a reply saying put a stock rom on it and its easy , but looking at some of them I understand Brexit easier than this is there an easy way to do this and maybe a you tube video I could follow any help would be so good thx for reading ps im a real novice
Click to expand...
Click to collapse
are you at all concerned about losing everything thats on the S7? The process of flashing stock int hard. Get a program called Odin, then install ADB system wide (theres an exe that will literally do it for you in about 7 seconds) and then download the correct firmware for your phone, put it in Odin, put your phone in download mode, flash the firmware, boot, profit, eat a sammich because you fixed it
hi sioux falls thank you for the reply but I am still totally lost so I think I will just give up all I wanted was it to start up so I could send the phone to mazuma byt its out realms of my ability obviously thanks any way
Sioux fall right I managed to install abd I have odin tried to download what I think is a rom but I don't know am I downloading a kernel? is that what I need
Related
Basically I unlocked bootloader and tried to load ROM. I tried the Desire and Cynagen. I was not successful at either. I manage to do a factory reset and the phone is working, except my wi-fi is shot, and when i recieve the initial OTA update it starts to download and then stops and I get the triangle of death as I call it with the lil android guy. I realy dont know what the hell Im doing and I need inch by inch restoring ROM for dummies instruction. I would like to go back to stock.I have been in threads but i get lost on certain things. I dont know what a adb is or how to acess it. I did read the noobies guide.. Please help as I am ready to chuck this thing out the window, i love my N1
I have searched the ORIGINAL SHIPPING TUTORIAL
and one other thread but i guess i cant post links.
please help!!!
do a search for adb for dummies on this site. it should help
Buck Shot said:
Basically I unlocked bootloader and tried to load ROM. I tried the Desire and Cynagen. I was not successful at either. I manage to do a factory reset and the phone is working, except my wi-fi is shot, and when i recieve the initial OTA update it starts to download and then stops and I get the triangle of death as I call it with the lil android guy. I realy dont know what the hell Im doing and I need inch by inch restoring ROM for dummies instruction. I would like to go back to stock.I have been in threads but i get lost on certain things. I dont know what a adb is or how to acess it. I did read the noobies guide.. Please help as I am ready to chuck this thing out the window, i love my N1
I have searched the ORIGINAL SHIPPING TUTORIAL
and one other thread but i guess i cant post links.
please help!!!
Click to expand...
Click to collapse
did you try to load rom in the recovery img? This also happened to me (triangle with the android guy) and I thought I couldnt flash custom roms. For some reason the regular reboot to recovery mode gives me the triangle of death as you call it.
I got around this by loading in into bootloader mode then going to my command console, getting to my skd tools folder, and then typing
fastboot boot (whatever recovery img you used)
Then everything worked perfectly.
They are going to move this to General....
You did not follow the steps correctly it sounds.
Did you Load Amon Ras Recovery?
IF YES,
GO into Recovery
WIPE data
Flash Cyanogen's Latest ROM
Flash Google Apps available on Cyanogen's front page Post
In future ALWAYS nandroid Backup...
If you did not load Amon Ra's Recovery, you should go do this from fastboot.
I'll try to explain it to you:
1. The Bootloader is unlocked (you see the open lock at the first screen)? If you don't see the lock this is the first you should do or send it directly in for repair!
2. Then you have to flash the Recovery ROM (http://forum.xda-developers.com/showthread.php?t=611829) This you need to flash an update.zip Exact instalation guide is in the Link.
3. The ROM. If you want Stock then here you'll find it as an update.zip: http://android.modaco.com/content/g...-online-kitchen-optional-root-insecure-himem/
Choose one without includet Radio ROM!!! (See below why!)
4. Copy the ROM to your SD Card Root
5. Go into Recovery ROM (Vol Down with Power and then select recovery with the Volume button). There you select wipe and choose the first entry there (wipe data and cache)
6. Stay in Recovery ROM and selct Flash from update.zip and select the update.zip. Wait until everything is done and you are promted to reset your N1.
(DON'T MESS AROUND WITH THE RADIO ROM IF YOU DON'T KNOW EXACTLY WHAT YOU ARE DOING. DON'T UNDERSTAND ME WRONG, I THINK YOU HAVE NO GLIMPS WHAT YOU ARE DOING SO BETTER LEAVE THE RADIO ROM ALONE!!! YOU MAY BRICK (DESTROY) YOUR PHONE WITH IT!!! If you dont believe: http://android.modaco.com/content/g...odaco-com/303716/nexus-cannot-on-after-flash/)
7. There should be no 7. Everything should be fine by now.
Hope I could help.
** 100 Posts **
Stheoft u are my hero!!! Now hold do I get the multitouch update? lol sorry
DID YOU EVERY KNOW THAT UR MY HERRRRRRROOOOO
edit: i got it, im back to square one... thanks alot for all ur help
@ Buck Shot, this is a development forum... threads with question shud go in the general forum... these are making the development forum a mess....
Greetings everyone,
So will not try to type out a book here, but want to try to include all the info/everything I have done do this point. I recently purchased a Galaxy S4 ( SGH-I337) ATT model. My end goal was to have it rooted with CM 11 installed on it. This is only the second phone I have attempted to root ( First was Atrix HD which went overall fine). I'm basing my end goal off of it, in that I am wanting to have it rooted with CM 11 installed. I started off by downloading Odin and used towel and was able to get the phone rooted. That seemed to have gone without too many problems. I tried to do as much reading as I could, but I'm sure I either misread or overlooked where I went wrong next. I then installed TWRP in the hopes of getting CM 11 installed. This is where the problems start. After installing TWRP ( later reading I saw I probably should have used Philz soft touch??) and restarting my phone it would only go into " Download Mode" and would forever just sit there. I did some searching and saw how to get past this simply by just restarting and holding the volume up and selecting now that I did not want to enter into Download mode. At this point I decided to go download the stock ROM and start over. I downloaded and followed the instructions from
Greetings everyone,
So will not try to type out a book here, but want to try to include all the info/everything I have done do this point. I recently purchased a Galaxy S4 ( SGH-I337) ATT model. My end goal was to have it rooted with CM 11 installed on it. This is only the second phone I have attempted to root ( First was Atrix HD which went overall fine). I'm basing my end goal off of it, in that I am wanting to have it rooted with CM 11 installed. I started off by downloading Odin and used towel and was able to get the phone rooted. That seemed to have gone without too many problems. I tried to do as much reading as I could, but I'm sure I either misread or overlooked where I went wrong next. I then installed TWRP in the hopes of getting CM 11 installed. This is where the problems start. After installing TWRP ( later reading I saw I probably should have used Philz soft touch??) and restarting my phone it would only go into " Download Mode" and would forever just sit there. I did some searching and saw how to get past this simply by just restarting and holding the volume up and selecting now that I did not want to enter into Download mode. At this point I decided to go download the stock ROM and start over. I downloaded and followed the instructions from
androidrootz.com/2014/03/how-to-unrootunbrick-at-galaxy-s4-sgh.html . From that point is where things went to hell in a hand-basket. My phone will load but whenever I try to turn on Wifi to try to re-root I get a Security Information message saying that it has blocked Wifi from turning on. Quick Google search says this is built in security "Knox"? that is causing this. Posts say that I have the wrong firmware for this phone? The bigger problem seems to be that now when I try to boot into recovery, I get a background that says "No Command" and red lettering at the top that says " Android system recovery <3e>. I have options to reboot system now, update from ADB and others. At the bottom it says #Manual Mode# Successfully applied multi-CSC. So somehow I think i have corrupted the boot loader. Of course Odin will not recognize the phone in this state to try to push any kind of firmware or boot-loader to it. At this point I truley am clueless and lost. Not at all above saying I'm above my head and need some guidence or help from someone who knows a lot more about this then I do. I really thought I had read and done plenty of research before I tried this, but non the less I have a phone I can't get into recovery and once booted, I can't get wifi to work. Thanks for your time and insight. From that point is where things went to hell in a hand-basket. My phone will load but whenever I try to turn on Wifi to try to re-root I get a Security Information message saying that it has blocked Wifi from turning on. Quick Google search says this is built in security "Knox"? that is causing this. Posts say that I have the wrong firmware for this phone? The bigger problem seems to be that now when I try to boot into recovery, I get a background that says "No Command" and red lettering at the top that says " Android system recovery <3e>. I have options to reboot system now, update from ADB and others. At the bottom it says #Manual Mode# Successfully applied multi-CSC. So somehow I think i have corrupted the boot loader. Of course Odin will not recognize the phone in this state to try to push any kind of firmware or boot-loader to it. At this point I truley am clueless and lost. Not at all above saying I'm above my head and need some guidence or help from someone who knows a lot more about this then I do. I really thought I had read and done plenty of research before I tried this, but non the less I have a phone I can't get into recovery and once booted, I can't get wifi to work. Thanks for your time and insight.
Tl,dr sure looks like a book to me. If you just got an s4 I'm sure the bootloader can't be exploited and you can't use cm. Look through this http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Tl,dr sure looks like a book to me. If you just got an s4 I'm sure the bootloader can't be exploited and you can't use cm. Look through this http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the link. Very helpful info. Problem I can't seem to get around is that since any ROM i download will not pass the signature inside the recovery mode, I don't know how to get to where I can flash any kind of ROM to it. Yes sorry for the book, I just see too often people don't ever post enough info on what they have or what they have done. In essence how do i use Odin if i can't get into download mode and recovery mode will not accept any file cause it says it fails the md5 signature? Thanks for the help
bryantjb said:
Thanks for the link. Very helpful info. Problem I can't seem to get around is that since any ROM i download will not pass the signature inside the recovery mode, I don't know how to get to where I can flash any kind of ROM to it. Yes sorry for the book, I just see too often people don't ever post enough info on what they have or what they have done. In essence how do i use Odin if i can't get into download mode and recovery mode will not accept any file cause it says it fails the md5 signature? Thanks for the help
Click to expand...
Click to collapse
I don't want to give you useless information, but make sure you're using the right steps to get into download mode.
1) Power off your device
2) Remove battery for 10 seconds
3) Replace battery
4) Hold POWER + HOME + VOLUME DOWN until you see the "Warning" Screen
5) Quickly hit the VOLUME UP button.
Then you can connect to ODIN, and go from there.
Hello my fellow XDA Members. I am stuck in a tight spot and after reading and re-reading some things the situation doesn't look very promising. I hope this is the moment that Karma shows up and I can get some help on this. Here it goes.
Specs - LG G2 D801 Variant > TWRP V2.8.3.1 > NO OS Currently
I was running Cloudy G3 Rom smoothly and got bored and decided to flash that new rom that is a 5.0 Rom all variants. Did the usual back ups and flashed it. Something happened when I flashed the rom. It went through the Aroma installer and then said "successful" but stuck in a bootloop. I tried it again and nothing happened. Then I tried to wipe everything again and started getting an E: Cannot mount (data or system I forget which as that error went away after I completely formatted data, wiped everything and reflashed Cloudy Stock. )
> Cloudy stock bootlooped and nothing is happening in TWRP. I Am using the USB OTG method of getting files on the phone and getting it charged but anytime I try to do anything (flash a rom, an older version of TWRP) it just immediately restarts TWRP and thats that. I have No OS at all.
> I tried to use one of the methods to get into download mode and flash a stock KDZ but the phone acts like it is going into DL mode (shows the little blue transition screen) but never gets into the ACTUAL download mode where the PC or flash tool can recognize it.
So in a nutshell > No OS > I can get into TWRP but it does nothing > No Download Mode > Don't want a new phone > Don't want to take it apart and try to short circuit anything if possible. LOL.
I am totally stuck here. I am done alot of work and even helped friends and family out with their devices over the years. I am just not sure if I need to consider it a done deal and get a new phone or maybe one of you guys know of something easy and obvious (please let it be the latter) I am missing. Thanks for any help you can offer. I Will be standing by.
Have you tried to reflash bootloader? If not, do that and reflash cloudy right away
wisefreakz said:
Have you tried to reflash bootloader? If not, do that and reflash cloudy right away
Click to expand...
Click to collapse
I haven't thought about flashing a bootloader. How would I flash the bootloader if I can not the phone into either DL mode and or TWRP doesn't do anything either? Is a bootloader file just a flashable file like any other .zip file?
jcnbama said:
I haven't thought about flashing a bootloader. How would I flash the bootloader if I can not the phone into either DL mode and or TWRP doesn't do anything either? Is a bootloader file just a flashable file like any other .zip file?
Click to expand...
Click to collapse
@jcnbama
Have you tried this or this?
euphoria360 said:
@jcnbama
Have you tried this or this?
Click to expand...
Click to collapse
The first one I can not do as I do not have any knowledge at all of Ubuntu, Linux, or any of that. It would take forever to get a working knowledge of that software in order to get things going again. I would probably just have to either take it to a cellphone repair shop or get another phone before I could do the first link.
I have not tried the second one but it is a viable option. I was looking at it online and trying to talk myself down from having to do that. I would reallllllllly rather not have to take my phone apart if I can keep from so that's kind of what this post is all about. Just trying to see if anyone knows of ANYTHING else before I go taking apart my phone.
Can you describe more about "twrp doesnt do anything"?
Does twrp boot up?
Can u see/wipe partitions?
Can u install any rom in twrp? Does it finish?
euphoria360 said:
Can you describe more about "twrp doesnt do anything"?
Does twrp boot up?
Can u see/wipe partitions?
Can u install any rom in twrp? Does it finish?
Click to expand...
Click to collapse
TWRP boots and I can go into wipe, advanced wipe, and format data and it says it's successful. I can use file manager and move items back and forth from USB OTG. If I try to flash anything it just reboots TWRP immediately so I can't install any .zip files at all.
My guess is that your bootloader is damaged.
The only option i can see for you is that Ubuntu thing i shared with you. So, lets stop acting lazy and do what needs to be done. Dont scare since there is nothing to loose. LG G2 is unbrikable
Booting up ubuntu or any other linux os is so easy. And there is nothing much to learn. Trust me.
Go to ubuntu website and download their newest iso file. Burn it on dvd and boot it up. You dont have to install it, just choose "live mode" and it boots up. Just like that. Then yiu can proceed with tutorial mentioned above and it shouldnt take more than an hour from you. Its all typing some commands in terminal (remember CMD in windows!).
Just make sure to download the files mentioned in that tutorial before proceeding.
euphoria360 said:
My guess is that your bootloader is damaged.
The only option i can see for you is that Ubuntu thing i shared with you. So, lets stop acting lazy and do what needs to be done. Dont scare since there is nothing to loose. LG G2 is unbrikable
Booting up ubuntu or any other linux os is so easy. And there is nothing much to learn. Trust me.
Go to ubuntu website and download their newest iso file. Burn it on dvd and boot it up. You dont have to install it, just choose "live mode" and it boots up. Just like that. Then yiu can proceed with tutorial mentioned above and it shouldnt take more than an hour from you. Its all typing some commands in terminal (remember CMD in windows!).
Just make sure to download the files mentioned in that tutorial before proceeding.
Click to expand...
Click to collapse
First of all calling people lazy is not nice. I'm not lazy I am trying to play it safe. I wouldn't want to brick it to the point to where I don't even have recovery and it can not even be charged any longer. I have Ubuntu on my desktop upstairs. I have used it a little. It's not that I am completely ignorant to Ubuntu I am just a total novice. Also the issue described in that post doesn't exactly match my situation. I am not in a black screen. It's more like a bootloop that I can not get out of because TWRP is not doing what it needs to do and I can not flash TWRP a ROM or get into DL mode at all. Also that post says,
"VERY IMPORTANT!!!!!!! You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone."
I don't have a rom on my phone soooo...
You didn't answer my question well. If on TWRP you can finish installing rom without any error, and you keep coming to twrp after restarts, that's another situation. Try this:
http://forum.xda-developers.com/showthread.php?t=2451696
But if you cant even finish install in twrp (twrp gives you errors or just restarts before giving you "successful", either you have problem in rom you try to flash or you need to build everything up from start.
That lazy thing was for encouraging you to do it.
And you cant brick your device. There is always a way on G2.
For img files: find them from last stock rom that was working on your phone.
Deleted
No need to explain why i needed to spoof my device but i tried editing the biuld.prop to sm-n9005 ( note 3) it didnt work but didnt chage it back as it made no difference other than chnage in device settins. so i downloaded device spoof and change it to another brand cant remmeber all i needed was for it to not be abote 4 cause of screen resolution and certain apps arnt compatable. anyway i spoofed it downloaded the app and the ask device spoof to return to previous and when phoone rebooted it stuck on the first boot screen note 4 android , so i thought i would reflash with stock rom but now when i try to flash it says Unsupported dev type on the phone and fails to flash.
is there away to reflash boot loader kernel or anything i can do as i think it wont flash cause it now thinks the phone is something different .
please have mercy have done this sort of thing in past with no problems i am thinking cause i didnt change the build prop back to the note 4 from note 3 device spoof has reflashed it to a note 3
or is there away to get odin to force flash and get past the phone saying unsupported dev type
any help trying to solve this would be very greatfull
I can get into download mode and the stock recovery but it says install anything from sdcard is locked and adb is locked when i try to select them
thanks
steve
ps i think this is rught forum it did say for questions and help
update have installed a custom recovery but every time i try to install a custom rom it says the rom is for a trltexx and my devie is a trlte ? accoring to google search this is the same thing ??? whats gives lol
managed to install a custom rom it installed but when it booted it did the same just stayed on the first boot screen the samsung note 4 andthen vibrated and rebooted does not even get to the samsung logo, what gives why would it do this ? have cleared cash all sorts dont overlook me a u think i am a newbee please as i have flashed other phones never had a problem other than a boot loop that was sorted with wipein cash files. this has me stooped surely a dev can give some help please you would be top of my list for christmas cards lol
sorry everyone turns out the site that said the stock rom was for my phone was wrong managed to get the stock rom from better site and now phone currently been set up again as we speak on stock rom just need to root it then can install the app as i manage to download the app and will change the resolution using adb next time instead of trying to use a shrt cut by using an app that obviously is not suitable for all phones that it is used on as a number of people have reported the same thing.
thanks everyone and this is my lesson to be learned
Hello there,
I am having a little bit of an issue with a new Galaxy Note 4 that i got for my wife. We both bought our devices yesterday, mine from Three, and hers from EE (we are in the UK), both SM-N910F, so i proceeded to root my device and it worked all great. So earlier today i started the exact same procedure, unfortunately, my wifes Note 4 got stuck in a Recovery Boot Loop, and i genuinely don't understand what is happening.
As for the rooting method, i went with the [SM-N910*] CF-Auto-Root and choose the right .tar file, or else it wouldn't of had worked on the first device.
I have read quite a few posts, saw a few videos on youtube, but it far beyond me. I have seen a few people mention that i need to download the German (?) version of the Stock firmware, and then flash it. I seem to have found a link for it on SamMobile but it's gonna take 5 hours to finish, and i don't understand why i would download the German Stock firmware, is that the correct one for her device ?
At this point, is there any way around it ? Why did my device which is the same work perfectly, but not hers ?
I would appreciate any and all help, if you could make it quite detailed for me i would appreciate it even more.
Thank you!
Hi @Vaskie!
Can you enter in download mode?
Hello there @_mone, the following has happened since i posted:
Went ahead and flashed the following: N910FXXU1BOB4_N910FOXA1BOB4_N910FXXU1BOB4_HOME.tar and it made the device reach the home screen, from there i attempted to root using the same method which worked, but it ended installing a few extra applications, which i don't understand how. I also don't understand how flashing a new stock rom didn't make me start the device from the beginning, it already had all my information and went straight to the home screen ready to use. I feel quite confused if im honest.
On the other hand, most things seem to be working perfect, but i am having some issues with the front camera. I have two Note 4s, both bought yesterday from the same place, but one was flashed with the Stock rom (N910FXXU1BOB4_N910FOXA1BOB4_N910FXXU1BOB4_HOME.ta r) due to being stuck in a boot loop. The front camera seems to be massively over exposed compared to the other Note 4, not just a little bit either, making it almost unusable.
Would anyone be able to help ?
Vaskie said:
I also don't understand how flashing a new stock rom didn't make me start the device from the beginning, it already had all my information and went straight to the home screen ready to use. I feel quite confused if im honest.
Click to expand...
Click to collapse
That's because you "dirty" flashed a new ROM on top of the old one.. it was like an "update".
What I suggest you (because you already rooted your phone and your knox is 0x1) is to flash TeamWin Recovery Project from ODIN and then flash a TW ROM from the Galaxy Note 4 Android Development (Snapdragon) page
To do so download "twrp-2.8.7.0-trltexx.img.tar" from here, put your phone in download mode, connect it to the pc via usb, from the pc launch odin, let it recognize your phone, add the downloaded .img.tar file on the pda button, click on the "start" button and let it flash the recovery.
Now download a TW ROM like _alexndr's DevBase from here and this modem and this bootloader.
Then put the downloaded ROM (N910FXXU1POF2_DevBase_alexndr.zip) in your external SDcard. Reboot your phone in recovery mode. From TWRP go Wipe/AdwancedWipe/ and tick DalickCache, System, Data, Internal Storage, Cache and "Swipe to Wipe". After go back to the first page, hit "Install" search "N910FXXU1POF2_DevBase_alexndr.zip" in "/external_sd" and install it. Wipe Dalvick and Cache again and reboot into download mode. Again connect your phone to the PC and launch ODIN now put the downloaded modem "CP_N910FXXU1POF1.tar.md5" in the CP button and the bootloader "BL_N910FXXU1POF2.tar.md5" in the BL button and click on the "start".
Once it is done switch off and on your phone and start again with the latest samsung rom for N910F already with root, busy box and all the fixes by _alexndr
And let us know if you still have problems.
Thank you very, very much for the very well detailed reply @_mone
I will attempt to go ahead with your explanation tomorrow. Would that somehow fix the camera, and i guess the other question is.. is the front camera issue that i explained myself above to do with me "dirty flashing" ?
Is there anything inherently wrong with "dirty flashing" ?
Thank you yet again!
Nothing wrong with dirty flashing.. but sometimes doing so you can create conflicts between old and new rom or leaving "bugs" from the old to the new generating problems in your new os that may wont be there if you performed a clean install. :good: