Related
Ok, so I have a Droid X2, and the Droid X and Droid 1 as predecessors. I have never had any major problems, and the few that I couldn't get around I had SBF via RSD for. To my knowledge, there is no form of SBF for the Acer A500 (yet). So heres the issue:
I may have either flashed an update without the proper files to go before it; or I have have forgotton to wipe something. Nonetheless, my A500 wouldn't boot. When I did some research, I went to this site:
{http://forum.ppcgeeks.com/showthread.php?p=2127076#post2127076}
because it seemed in my eyes to have the most pertinent information. I got the update.zip to install and my A500 booted again! However, I could not get to stop two because my insternal SD card was wiped somehow and when I get to the main screen, do the circular unlock, the launcer, and many other programs repeatedly force close, so much so that I cannot do ANYTHING. How would you approach this, and is there a way for me to get into CWM. I have a recent nandroid backup that what 100% functional, and I would hope the MD5 sums would still match....
Any help/advice is greatly appreciated!
you're wrong, this is absolutely normal issue
http://forum.xda-developers.com/showthread.php?t=1159443
follow this link, this will give you yout tablet back fully operational.
in case of any further prob, this links will help you to perform an Hard/Wipe reset
http://forum.xda-developers.com/showthread.php?t=1132760
good luck
xda-dev2k said:
you're wrong, this is absolutely normal issue
http://forum.xda-developers.com/showthread.php?t=1159443
follow this link, this will give you yout tablet back fully operational.
in case of any further prob, this links will help you to perform an Hard/Wipe reset
http://forum.xda-developers.com/showthread.php?t=1132760
good luck
Click to expand...
Click to collapse
The top link provides a way to install via Acer recovery the new 3.1 OS, but to my understanding its unrootable for now, is that still the case?
the update zip is uploadable even without root.
just like the original OTA firmware. Try it, many other users got back their pads with this one, as you can see in internal posts of the thread
xda-dev2k said:
the update zip is uploadable even without root.
just like the original OTA firmware. Try it, many other users got back their pads with this one, as you can see in internal posts of the thread
Click to expand...
Click to collapse
I totally get what you're saying. What I meant is that if I did the update, it completed successfully, that I would then NOT be able to root the device. Obviously that is a better option that a brick! But I'm trying to find out if I can recover to the most updated version that has been rooted.
Maybe I'm wrong and a root program has been made for 3.1?
hey mate, U quite a little lazy readinf threads titles uh...
take a look at this http://forum.xda-developers.com/showthread.php?t=1138228
pick up the 1.3 version. it will root your "definitely final" version of os, this update U have just uploaded IS the last one available, and it's eligible of any further OTA update...
take care
xda-dev2k said:
hey mate, U quite a little lazy readinf threads titles uh...
take a look at this http://forum.xda-developers.com/showthread.php?t=1138228
pick up the 1.3 version. it will root your "definitely final" version of os, this update U have just uploaded IS the last one available, and it's eligible of any further OTA update...
take care
Click to expand...
Click to collapse
I work 70+ hours a week, I'm certainly not lazy. But that is why I ask these questions hoping for someone to give me a little short cut to the answer. Between work and sleep I have 2.75 free hours a day and do NOT want to spend them reading a forum where its a lot of bs banter in between the actual info. I'm sure there are a lot of people out there that just don't read, but I truly don't have the time.
Also, this is one of the biggest forums for Android out there. Theres no way I could ever read the HUNDREDS of threads just on this device alone....
I do appreaciate your help!!!
I'll give a final report when I have a chance to do it!
This method did NOT work. When I boot into recovery, it always goes to the screen with the triangle and the android. I never see a progress bar....does this matter?
I also tried your other suggestion of "wipe device without recovery" and that didnt work as well.
I know its not a lost cause since it boots all the way up. But every app force closes so I have NO access
YOU have to do things in proper steps !!! ( lack of sleep will do that to you ! )
1/ grab the file from that thread
http://forum.xda-developers.com/showthread.php?t=1159443
( remember to unzip it to get update.zip file and placed on your card and flash using normal recovery.... not renaming ! )... assuming you don't have CWM at the moment.
2/ grab the "iconiaroot 1.3" file to root your device ( as CWM and Acer Recovery Installer required root access )
3/ grab the Acer Recovery Installer and proceed to install CWM to your device...
after all those are done... work your way with CWM ( to access CWM ... you need to keep holding the buttons (Power & Volume down) until you see 4 lines of text...and not let go before that !! )
remember to wipe cache & factory reset ( both before and after to ensure 110% cleaned to avoid errors and FC )
good luck !!
UnicornKaz said:
YOU have to do things in proper steps !!! ( lack of sleep will do that to you ! )
1/ grab the file from that thread
http://forum.xda-developers.com/showthread.php?t=1159443
( remember to unzip it to get update.zip file and placed on your card and flash using normal recovery.... not renaming ! )... assuming you don't have CWM at the moment.
2/ grab the "iconiaroot 1.3" file to root your device ( as CWM and Acer Recovery Installer required root access )
3/ grab the Acer Recovery Installer and proceed to install CWM to your device...
after all those are done... work your way with CWM ( to access CWM ... you need to keep holding the buttons (Power & Volume down) until you see 4 lines of text...and not let go before that !! )
remember to wipe cache & factory reset ( both before and after to ensure 110% cleaned to avoid errors and FC )
good luck !!
Click to expand...
Click to collapse
So I responded to this last night, but somehow it disappeared?? Anyways, thank you for your effort to help me resolve this, but if you look at my initial post, there's no way your description and process would work. First of all, the update above I tried (like I mentioned) and it did NOT work. Also from my description I mentioned that when the tablet does boot, it boots to the home screen (stock green) but, all the important applications, the launcer included, force close so rapidly and repeatedly that I can't do ANYTHING. Thus, I would obviously NOT be able to install any programs, let alone root the device.
Thus the name of this thread....
ibrooks123 said:
So I responded to this last night, but somehow it disappeared?? Anyways, thank you for your effort to help me resolve this, but if you look at my initial post, there's no way your description and process would work. First of all, the update above I tried (like I mentioned) and it did NOT work. Also from my description I mentioned that when the tablet does boot, it boots to the home screen (stock green) but, all the important applications, the launcer included, force close so rapidly and repeatedly that I can't do ANYTHING. Thus, I would obviously NOT be able to install any programs, let alone root the device.
Thus the name of this thread....
Click to expand...
Click to collapse
And obviously you are suffering from lack of sleep !!
The update.zip ( after extraction ) from that thread can be flash either normal recovery or CWM recovery.
and here's the added tool to wipe without a recovery:http://forum.xda-developers.com/showthread.php?t=1132760
Therefore... what's stopping you ??
and please re-read my steps above.. after flashing... you will need to root and re-flash CWM using ( Acer Recovery Installer)
maybe you're not clearly looking at the picture...
there are 2 recoveries ( normal Acer stock recovery and CWM recovery )... DO NOT mistake Acer's stock recovery for the program called Acer Recovery Installer.
what Acer recovery Installer does is install CWM recovery for you and also backup/restore your original Acer recovery.
and you cannot use the program until you are rooted ( step #2 above )
FYI ... each recovery boot differently !!
Stock recovery -->> hold Power & volume down ( closest to the power button ) until some text appear 2-3 lines )
CWM recovery invoke differently.... ( hold Power & Volume down until you get 4 lines of text... do not let go anytime earlier then that )
~~~
extract that update.zip file ( my guess is this is where you went wrong... you didn't extract ? )
when you extract... make sure only the update.zip is put on your MicroSD card ( format FAT32 ).... no sub-folder...etc
Then insert into device and use the stock recovery method above.
if all else fail... get a different microSD card !!
then follow steps #2 and #3 from my previous post .
again... what's stopping you ??
I did the steps that E.B. recommended initially (directions followed religiously). Then I did what you posted (twice now,again, religiously - and yes I know how to, and properly extracted the update. !). Furthermore, I also tried a totally different SD card. 8gb pny VS 16gb San disk.
Hi there,
I had been umming and arring about rooting and installing a new ROM one of my familys HTC Heroes for some time now and finally after reading lots of "How to's" on lots of different forums I decided to take the plunge and give it a go using the guide on here.
Both my wifes phone and my sons phone are sim unlocked Orange HTC Heros running 2.1-Update 1.
Rooting it was easy. One press of a button and I was there. Its pretty much worked OK and I have sucessfully made three backups of the wifes Hero.
My main query and this is the bit I have not really been able to find much info about despite spending a day trawling through the forums looking for similar queries is this:
Having flashed my recovery image file, the first time I reboot I can get into the recovery mode just fine. From here I can make a backup of the current ROM after which the Hero reboots and goes back into the OS as it should.
If I then shut it down and reboot using the HOME key + POWER option It does not go into the recovery mode. I get the screen with an image of the phone next to a red triangle with an exclamation mark in it.
Using the advice from various forums whilst searching for further advice / hints I have left the phone for up to half an hour but it stays on this screen. The only way to get it out of this screen it to pull the battery.
If I then boot up the phone and reflash the recovery image, I can then get into the recovery mode once again but for ONE BOOT ONLY.
I have tried AmonRA Revcovery v1.7.01. and also the Clockwork Recovery 2.5.0.7 images and both produce the same results. I have tried flashing the images via ROM Manager and also via Android Terminal Emulator
My question is this: Do I have to flash the recovery image EVERY time I want to open the recovery mode or is there something I have missed? At present I have held back from installing a new ROM in case I go past a point of no return where I brick the phone. Neither my wife or son would be too pleased despite my son wanting a better ROM on his.
Apologies for writing "War and Peace" but I wanted to make sure I had covered all I could and hope this is a) not a query already posted elswhere which I have missed b)posted in the right place. Apologies to any forum mods if its not.
Regards
Rhinestone.
hmm look on the unlokr.com or something like that. They use some simple passes and it's the way i did it. the on;y difference is that my phone wasn't blocked on a carrier...
1.there is a program that roots the hero's rom
2.after that i recommend installing clockwork recovery mode (it doesn't need signed zips)
3.if you don't feel safe doing this, i recommend to stop... I know that the 2.1 rom is boring but you can end up with a bricked phone after this...
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
TheReverend210 said:
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
Click to expand...
Click to collapse
This, just flash a custom ROM and it will stick.
Hello,
Problem might be with rooting, possible it has not been rooted completely or anything messed up. You can try this for rooting.
http://unrevoked.com/
If you are sure its rooted completely, then check out Superuser apps, if its there, and you are rooted, if not then download terminal emulator and type "su" command, if its doesnt display any error then its rooted.
Other then this,
problem might be with the recovery images you are flashing, download droid explorer its a window application, its has an option of flashing recovery with one click, simply choose recovery image & flash it, clockmod recovery or amonr any of this you can get in xda.
i hope im posting this in the right place, ive never really messed with forums before, but anyways
ive done everything there is to do to get a custom rom on my streak (StreakDroid) including the whole flash recovery, when i do that it all seems like its working, but when i go to where you are supposed to install the streakdroid (when you turn your phone on with both volumes ect) soo when i get the screen with the blue letters, its tottally different it says something like "insert a SD card containing an update file(/sdcard/update.pkg and the only choice it gives me is press up on the volume to turn device off. BTW i did already had the streakdroid on my sd card. someone please HELP me
if this helps i have a Dell Streak from AT&T
V 2.2
Baseband Ver. 2.6.32.9-perf
OEM Ver. GAUSB1A135331
Build 15697
Thanks
Sounds like this might help.
You may also want to read this.
i already know all of this, but thanks for trying, i cant root it eather, i forgot to mention, it keeps failing, and ive tryed all versions of oneclick
Do this - you do not need root to use that method and is you read the previous links I posted you will figure out how to use StreakMod Recovery even if you aren't rooted.
I got same problem when I installed custom rom at very first time from stock 2.2.
Do this if still can boot to stock rom..
1) Rooting with Gingerbreak.apk , this will work..
2) After rooting done, use R.E and change one file in the system as this file automatically blocked custom recovery when reboot so your problem happened... your DS5 still booted on stock recovery even already flashed StreakMod recovery...
Read this.
3) After modifying one system file then flash StreakMod recovery then you can continue....
Hope this can help you.
i tried that too, but like ive said when i first made this post, when i go into streakmode (when i turn it on with both volume bottons ect) and go into mode after that all i get is something like for an emergency restore blah blah , idk whats wrong, ive done the streakmod right and still,
i have att 2.2 rom it wont allow me to install other source apks
Regarding the issues faced by the OP on this thread:
1. If you are seeing mention of an update file when trying to access StreakMod Recovery, then you let the Streak boot regularly once you installed StreakMod, rather than immediately booting into StreakMod Recovery. If you let the Streak boot normally, StreakMod Recovery gets overwritten. If you're trying to install StreakDroid, then you need to hold down volume down and up as soon as you finish flashing StreakMod Recovery via Fastboot to use it.
Custom ROMs do not have the problem with recovery images being overwritten.
2. The recommended method of rooting a Streak is to flash StreakMod Recovery and then flashing Superuser.zip through it. One click rooting methods are not 100% reliable. The OP is attempting to flash a custom ROM, which doesn't require flashing Superuser.zip. It DOES require flashing StreakMod Recovery.
3. AT&T was supposed to permit sideloading on newer AT&T ROMs. Go to Settings>Applications and make sure "Unknown Sources" is checked. If the option is not present in the ROM, then either the ROM must be changed or a PC application such as the Sideload Wonder Machine must be used.
OP, you were attempting to change the ROM to StreakDroid. Did you change your mind?
@Strephon Alkhalikoi man, just when i thought all hope was lost, your 1. step did it all thank you sooooooo much for finally having my problem solved
also thanks to marvin02 and androidunia for trying to help me, i appreciate it
Hit the thanks button next to my post, Marvin's post, and androidunia's post if we helped out.
taylorgang809 said:
@Strephon Alkhalikoi man, just when i thought all hope was lost, your 1. step did it all thank you sooooooo much for finally having my problem solved
also thanks to marvin02 and androidunia for trying to help me, i appreciate it
Click to expand...
Click to collapse
Gee - the same info was available from my first post in this thread. All you had to do was click on a link and actually read. If you had you would have had the answer less then an hour after your OP.
marvin02 said:
Gee - the same info was available from my first post in this thread. All you had to do was click on a link and actually read. If you had you would have had the answer less then an hour after your OP.
Click to expand...
Click to collapse
+1......right !
Hello guys,
i got a serious and frustrating problem here.
A few days ago my xoom was stuck on the M screen, so I used a thread in the forum and recovered it.
It solved myh problem back then, but since I had 3.2 before this and the solution injected me with Android 3.01 my problems started to show themselves.
the first one is that
<b> Through Fastboot, RecoveryMod, ADB </b> and any other way you can Imagine to install a new ROM or even remove or create a file,
All of them show success message but when I check them out I see no changes.
i tried fastboot and Recovery to install nearly every ROM,Recovery and bootimage in this site but so far it was wild goose chase.
so I want to ask if I'm doing anything wrong or if you need any more information here, but please help me with this
wow I cant believe it, All these masterminds here and no answer to my distress signal??
Guys I am so in trouble and this is the only place I hoped to get answered.
I can provide you with more info if you need, but please dont say I'm on my own here.
all these years this forum was the last hope for me.
i know I'll get my answer here one day
You are not being very clear about what you have done,, but I'm assuming that you reinstalled the stock image that got you back to HC 3.01. Can you see if you are able to get OTA updates to get you back to at least 3.1, or 3.2 if possible?
If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?
Mohfath said:
If that's my problem forgive me please, Ive written that post in 3:00AM
for the sake of clearity I should add some info:
1. I even tried stock ROMs but you see I cant even flash them (Not from Recovery nor Fastboot) the steps seem successful : it opens the package,it installs them and it says everything was a success. But when I restart the device I see nothing has changed.
2. OTA updates are the same, they keep downloading and when the sysem reboots to recovery to install them it cant find them.
3. You dont believe it if I say even files and programs that I remove from device by my hand(Android OS) are back after the first restart.
And you see it's dark magic! everything from a file to a partition are back by one reboot. I dont know what should I call it but I havent seen anything like it on the whole Internet.
So seems like I should make a competition for the xda experts here
Can you publish it so all of them can see it?
Click to expand...
Click to collapse
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?
okantomi said:
Actually, I have seen someone with the same problem here on this forum, but I can't recall exactly what the solution was.
Can you describe, step by step what you are doing, what cable you are connecting to your pc with, etc?
Click to expand...
Click to collapse
That would be relief to know this could be solvable.
I will look more too.
As for your post I must say:
1. I plug the Xoom to the PC using the included cable
2. I start the xoom and start fastboot
3. on the PC system has the drivers and completely knows it
4. I start with SDK:
I. Fastboot oem unlock (Completing onscreen instructions and reboot device)
II. Fastboot mode again I use Fastboot flash boot boot.img
III. Continuing with Recovery,System
IV. Rebooting the device anything is the same.
My ROM is unchanged by the process and keeeeeeeeps giving the damn error of System process error please submit
5. And with ClockworkrecoveryMod I have the stock ROM on my sd card.
I. I choose install zip from sd card.
II.Choose the correct zip file and start flashing.
III. Choosing Wipe Data/Factory reset will take the device into a complete hang. unless I first use the mount page to mount the System/Data
IV. I reboot the device and ..... you know nothing changed.
so thats my story.
Still hope to find something about it.
Thanks...that was helpful. But now I want to know the following:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .
okantomi said:
Were you rooted before the trouble started?
What did you do to recover?
If rooted, what version of CWM recovery did you have installed? Did you do a nanadroid backup? (I guess the answer is no, because you could have just restored with that).
What recovery are you accessing when trying to flash a zip file?
If you can answer these questions I will continue to wrack my brain trying to recall where I saw that thread.
Edit: please check out this thread http://forum.xda-developers.com/showthread.php?t=1370312
Some of what I said to him may help you .
Click to expand...
Click to collapse
Being rooted? -> Yes, The world is more beautiful with root!
to recover -> I followed this: http://forum.xda-developers.com/showthread.php?t=1097997 Shame it was Android 3.0
I use ClockworkRecovery 3.0.0.28 and I cant upgrade it cause of ... you know
And for your help I must say you are definitely the most caring person I know...
I'm off to check the provided link now
I was thinking of something that might be a reason.
I have this tiny problem:
When I go to CWM and choose Erase userData/Factory Reset Device Hangs
Click to expand...
Click to collapse
I was thinking of may be the userdata partition is corrupted and I gotta find a way to flash it completely.
Somehow I used Fastboot utility to do this and after saying Success, Nothing changed again.
Do you know any other way to physically do this job?
HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Vul said:
HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Click to expand...
Click to collapse
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
If you can get on Wifi, try to go the the Play store and download Tweakker or other APN utilities that enter the APN for your based on your carrier.
co.ag.2005 said:
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
Click to expand...
Click to collapse
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Is this an AT&T branded phone? I'm not sure if getting back to stock is necessary, and if you do get back to stock, you might be SIM locked to AT&T (I could be wrong however). If you want to flash a fresh, stock ROM but still be rooted, SIM unlocked, etc., find a 2.3.6 Fruitcake in this forum or try NottachTrix 4G ROM.
however, I'd wait till others weighed in before doing anything. Honestly, I'd try getting your APN (download Tweakker app and walk through the steps) going now and if that solves your issue, your ROM might be working fine for you... my $0.02
oh, and welcome to XDA!
Vul said:
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Click to expand...
Click to collapse
1. Download the fruitcake .zip you want (webtop also, if you want it)
2. Do a full wipe with fastboot (search if you're unsure how to)
3. Boot into recovery and flash the .zip you downloaded from step 1
4. Reboot and you're done
This will put you back to stock. I can't remember if fruitcakes are pre-rooted, but if not you can easily root again.
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Vul said:
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Click to expand...
Click to collapse
that "unlocked" bit on start up means your bootloader is unlocked, doesn't have anything to do with the SIM card. All this means is that you can flash a ROM since the phone is "unlocked"
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Click to expand...
Click to collapse
the fruitcake .zip goes on your internal sdcard. BUT, before you start doing anything, please go through the stickied threads in this section and read up on how to flash ROMs to your phone. This will include how to wipe your phone using the fastboot commands and how to flash the fruitcake .zip.
start here, read this post
http://forum.xda-developers.com/showthread.php?t=1154600
then follow guides to
"HOW TO INSTALL FRUITCAKES ON 2.3.4 (GREAT SBF/RSD ALTERNATIVE!!!)"
and
"ROMs & Kernels:
FYI:
Before installing any ROM or Kernel I suggest you do the following to help prevent error, boot-loops, etc. Also, it's a good idea to flash a new ROM or Kernel on a fully charged device:
1) Download which ever ROM or Kernel you plan on flashing and have the .zip on your device ready to flash.
2) Backup your apps (not system data), contacts, etc. Also consider making a CWM backup of your device, just in case.
3) Boot into CWM Recovery
4) Wipe Dalvik Cache (under advanced in CWM)
5) Wipe Cache Partition
6) Wipe data/factory reset
6a) If you're using ROM Manager/CWM you will need to reboot the device after step 5, and upon reboot enter fastboot mode and enter the command: "fastboot -w" or "moto-fastboot -w" if you prefer using moto-fastboot. Then type "fastboot reboot" and upon reboot make sure to enter Android Recovery again, so that you can flash the ROM/Kernel.
7) Install .zip from SD Card (choose the .zip you wish to install)
8) If you installing a radio, theme, kernel, etc. on top of a ROM, I would suggest redoing the whole wipe process again between flashes.
9) Reboot the Device
- If you get a boot loop, try entering Android recovery and re-wiping the chace and data, and perhaps try reflashing the ROM/Kernel. Or if you made a CWM backup, you can always restore that."
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
Click to expand...
Click to collapse
Ok, sorry I wasn't that detailed in my other post and assumed you were on your phone (my bad). First things first, read the N00b guide.
1. Anytime you download CWM .zips, put them on the root of your phone's sdcard. You'll need them there in order access them from recovery. ( note: sdcard=internal sd card & sdcard-ext=external sd card for blur ROMS )
2. Fastboot commands are executed from the command line. Open a command prompt and navigate to the directory containing fastboot.exe in order to use it. The Noob guide should have links to all the fastboot commands you'll need.
3. With the Atrix's unlocked BL, holding Volume Down when turning the phone on will bring up a series of bootmodes to choose from. This is how you get into fastboot, recovery, RSD, etc. Navigate through the choices with Volume Down. Select one by pressing Volume Up. You should only ever really need Fastboot and Android Recovery.
4. CWM is used to flash .zips (ROMS, kernels, apps) while in recovery mode. Use romracer's to make things easier on yourself later.
Read through the N00b guide and this will all make perfect sense.
I have no idea what Im doing. I think because this phone has been tampered with so much already, it's making it extra tough to work with.
I managed to install CM7. Its the only ZIP file that actually seemed to take. I still dont understand fastboot , in the sense that I don;t know when Im supposed to see a command prompt. Also, now, CM7 is asking me to upgrade to premium and I have to pay for it. There doesnt seem to be a free way of installing it so that I can sync all my info through my google account. Ugh. Im not cut out for this but Ive been screwing with this literally since 730 this morning.
**CM7 with google apps packet installed. So far, so good. Im happy with this considering its pretty close to stock gingerbread, kinda like my G2. Now, Im hopefully done messing around. Would be nice if they release a solution for the fingerprint scanner or if I can get my gmail to auto sync but at least I can stop obsessing for the time being. Great help guys, thanks so much!!!!