Related
I just installed this program, used default settings, apllied, My 8125 soft reset.
Now I cannot see anthing past the initial screen that lists IPL and SPL version.
Just a plain white screen, Active sync wont work, no buttons work. Please help !!!!!!!!!!
If you're stuck I think the only next step would be a hard reset which is going to drop it back to the base factory build so you'll lose anything you've installed etc.
How do I hard reset 8125, with buttons only (key / button combination) OS does not boot or visible.
press the "connetions" button (on the left hand side of the unit next to volume up/down) with the "voice" button (right hand side of the unit opposite the connections button) and then use the stylus to do the normal soft reset and it should hard reset back to factory settings - it's described in the manual
Tried hard reset several times, no luck.
All I did was installed registry wizard from here
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
and now I can't get it to do anything, anymore suggestions ?, your help is really appriciated, I have only had the phone to 2 days and its dead already
try holding the same two buttons and then hitting the power button instead of the reset thingy... this method was easier for me... If this dosen't work you will have to enter bootloader mode and reflash the rom.
For the detailed reset procedures try here
By the way, did you use that program to change the default input method?? I use it all the time and the only time it gave me the whitescreen is when I tried to change the default input...Oops. I believe that you should be able to use that program safely, just leave the default input alone... Hope this helps.
Thanks for info, I did manage to reload the ROM. and Yes I did change the default input method, that might have done it. Thanks all, for your Help.
raheelb did you have the warning that the proggie cannot recognize the AKU version?
I had had such a warning, unfortunately bypassed it and had the same issue (white screen) - any one knows why the RegistryWizard cannot recognize AKU version? I have the original Qtek 2.17 ROM installed... :?
As far as we noticed, Wm6 has a terrible bug. Locked device with a password wont be recognized if battery was removed. Also it resets the clock. I believe there is a solution for the password thing. here's what i've done
1- Download and install this cab file Omega-Pass : http://www.megaupload.com/?d=OTW2NZT6 ( A password application that is gonna be used )
2- Go to the application and set the Password- Now the builtin lock application will take the settings from Omega-Pass .
3- youll notice that Windows Lock will require a password as if set as alphanumeric
4- Go back to the Built-in Lock Application and reset the password u want if u need a numerical form Only.
I think also u can just install the application and go directly to the builtin lock application and configure it but didnt try that. Dont wanna risk it i already had 4 hard reset
Now if you do all 4 steps even if u remove the battery for an hours , it will keep recognizing your password. The clock will be reset only. That worked for me .
Please inform me if it works for you also.
Karim.
120 views and no reply ?
well it may work but i just dont use password lock so ... it is useless to me, but this software does not fix the bug only prevents it from happening
Yes of course it interacts with the Builtin Lock code. if we can know how it's preventing it from happening maybe we can fix it ?
i am not so sure where exactly the bug is, but backup battery is only enabled when the main battery is depleted... but when you remove the main battery the power needed for preserving the basic information like time, date, lock password is not transferred from backup battery maybe this is power management or driver bug, and i have seen this in WM5 too
Buth at this time this problem is not yet solved
The thing i dnt understand is that WM6 devices Dont have a Backup battery as i saw on a HTC Touch device. So is it that BA is not 100% compatible with Wm6 ? or it's just a bug with all wm6 devices ?
well I tried, it seem working. for my case, I didn't need to remove the battery to have the problem, after a simple soft reset (after a reconfiguration with the advance reconfiguration tool), the password was lost.
So I do not know if i will have the problem again .
hope not
how did you get in your BA once the password is lost?
i just got my BA and installed WM6...
im down at my 20mins per retry...
Once the password is forgotten , You gotta hard-reset it. This solution only prevent it from being forgotten and cannot restore it.
What is original pass for that device?
Solution
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Help!!!
vipperdiver said:
Hi Guys..
The only way to skip this password screen taht i found was it:
Do a HARD hard reset (All data will be lost).
just soft reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
No more..
I hope that it help.
Click to expand...
Click to collapse
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
can anyone upload in rapidshare?
HaiLe512 said:
I got a unit from my girlfriend...in the process of soft spl upgrade something went wrong. Now I have a device asking for a password to unlock it. The old password was "prettyphone" and this password does not work now.
Now I cannot get the unit to connect via activesynch because it is asking for a password.
I press reset and do the above but all I got is a screen normally u see when you do rom upgrade...Please give me advise how to hard reset.
thanks
Click to expand...
Click to collapse
Hi Haile...
Did you these steps correct???
After you press the reset button with the stylus, immediately press and hold the record and camera buttons.
It should work.
No more.
wat i did when i experienced the password not accepted thingy was, when i did the hard reset, we needed to follow the "no, yes, yes" sequence. what i did was not choose yes on the option where it asked to reformat rom(i forgot what was written on the display). i think i chose "no,yes,no". after that, everything was still there and the password on startup was gone. hope this helps to some of u guys.
thank a lot
ccrraaapppp
If the device is locked,when the device is locked how can you download and install something...? Please somebody tell this clown that a device locked on password on WM6 ,you cannot access the phone whatsoever at all, WMDC will ask you to "autenticate" on the phone if you want connection...
The guy who gives this solution hasnt got a clue just as much Bill Gates hasnt.
yesss
yes it worked on mine this way as well.
Obviously the correct password wouldnt work...
Id like to see that billionaire giving some appologies for that....
Anyway mind this first;
Press and keep holding Camera and Record buttons .
Press reset in the same time
Keep holding Camera and Record another 2 more seconds .
Using the same two buttons do the No-yes-yes then
Attention ress just "OK" . pressing reset wont work.
IK does unlock .it just did my HTC .
Hello. First all sorry for my english.
Since a few days the buttons of my pda are crazy and don't work properly.
For example: The power button don't switch off the pda, but if I press and hold the button for a few seconds, switch off the ligth of the screen. This mean that the button isn´t broken, is it??? With the cam and record button it´s the same. If I press those buttons on windows 6 it works perfectly but i want to hard reset my pda and when reset and press whe i have to change "Clean Registry Hive " and "Format Storage" I can't change these options and cant make hard reset.
Then that is the question:
How can i make hard reset?? is there an alternative metod???? At Qtek S200 there is an application that clean the memory. It Exists for my blueangel??'
There is any application than do it???
Thanks. I´m waiting for answers.
u can use psshutXP it can do a hardreset with confirmation by holding the upper right corner of the application.
Hello.
Thanks for your answer.
I have tested your option, but it seems that the hard reset doesn´t work in wm6. It changes time and date, but don't clean memory, because i have the same programs than before.
I need another metod.
Thanks.
here u are..
just reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
good luck
cheers
adri..
Hello evoluzionne.
I know that way to do hard reset, but my problem is that i can´t change the options:
enable kitl should be no
clean registry hive should be yes
format storage should be yes
In Windows Mobile 5 or 6 the camera and record buttons works properly, but when I reset the device and press the record and camera button quickly before the the version appears (radio,etc).. i can´t change the optios. It´s seems like the buttons don´t work. But i know that the buttons works, but the buttons don´t change the options. It´s very stranger.
In the power button is seemed. I can switch on the device, i can switch on/off the screen if I press and hold the button but i Can´t switch off the device. It´s incredible. My buttons are crazy. So i want to do downgraded to WM2003 ( so I need to do hard reset).
Do you know why are my buttons crazy????
Thank for your answer, and sorry for my english
Ciao
Hi,
Just wondering if you resolved the issue. I am having a similar problem on pda2k upgrading from wm5 to wm6. Buttons work except during boot menu so i cannot change options.
Appreciate your help.
MC
melilleny said:
Hello evoluzionne.
I know that way to do hard reset, but my problem is that i can´t change the options:
enable kitl should be no
clean registry hive should be yes
format storage should be yes
In Windows Mobile 5 or 6 the camera and record buttons works properly, but when I reset the device and press the record and camera button quickly before the the version appears (radio,etc).. i can´t change the optios. It´s seems like the buttons don´t work. But i know that the buttons works, but the buttons don´t change the options. It´s very stranger.
In the power button is seemed. I can switch on the device, i can switch on/off the screen if I press and hold the button but i Can´t switch off the device. It´s incredible. My buttons are crazy. So i want to do downgraded to WM2003 ( so I need to do hard reset).
Do you know why are my buttons crazy????
Thank for your answer, and sorry for my english
Ciao
Click to expand...
Click to collapse
Another BA with the same problem
melilleny said:
Hello. First all sorry for my english.
Since a few days the buttons of my pda are crazy and don't work properly.
For example: The power button don't switch off the pda, but if I press and hold the button for a few seconds, switch off the ligth of the screen. This mean that the button isn´t broken, is it??? With the cam and record button it´s the same. If I press those buttons on windows 6 it works perfectly but i want to hard reset my pda and when reset and press whe i have to change "Clean Registry Hive " and "Format Storage" I can't change these options and cant make hard reset.
Click to expand...
Click to collapse
Hi,
I have an exact problem as you. I've followed any info about hard reset, I've red wiki 100times, searching using Google but perform hard reset or enter to bootloader mode on my BA is IMPOSSIBLE!
In November I've upgraded to WM6, ROM from pdaviet, OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
MDA is working without problems, I can use phone, wifi, camera, record, BT, ActiveSync 4.5.
Right now I want to upgrade to new ROM from pdaviet but I stuck with a step: enter to bootloader mode
I've tried psShupXP software, which is capable do a hard reset. Still no luck, after software hard reset my BA comes on with all files installed...
Unfortunatelly mtty doens't works too, I can't see any WCEUSBSH001 port...
I'm not alone, but the bad news is that I don't find any solution
Thanks for any hint
R.V.
I have the same problem as you do, except I can enter BootLoader and Hardreser, but I can't turn off my device with power button, and if I hold it for long it shuts the backlight.
If anyone had any sucess solving this please share how...
Thank you.
evoluzionne said:
just reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
good luck
cheers
adri..
Click to expand...
Click to collapse
I am following the same exact steps...flashed rom for the 5th time...hard reset is not working. The problem...'Mail' button (the hardware key) does not respond. I can change the options from No to Yes. But after pressing the 'mail' button nothing happens. Please let me know if there is another way to clear the registry hives and format the storage!!!
have you guys tried the MTTY alternative? i think it's somewhere here in the forum.
I am having the problem described in here.
By holding the record & media button, it *does* go to the hard reset menu, so obviously the record and wm buttons do work (ie is not a physical problem with the buttons), since these buttons do get it to the menu, it just does not allow any changes to the options (KITL, format storage, format registry hive)...
It is maddening, because I am stuck with the oldish pdaviet WM6 rom that crashes for me all the time and I want to try the newer 6.1 ROMs but can't hard reset and have seriously considered finding another used BA on ebay to start fresh it is driving me so nuts.....
I am about to search for the MTTY method described by samurai above... assuming I locate and can do it, I'll post results....
what do you mean "it just does not allow any changes to the options"? do you mean it wont let you navigate through each options? or do you mean it wont let you change from yes to no or no to yes?
any changes to the options are executed only after you have pushed the "mail" button
SilverSamurai said:
have you guys tried the MTTY alternative? i think it's somewhere here in the forum.
Click to expand...
Click to collapse
Catch:
http://forum.xda-developers.com/showthread.php?t=378640&highlight=MTTY
tried it myself - works great!
Bird
Hi ! Please I need your help !!! I have Elf , and after I upgrade to Onyx 5.6 and tried to install HTC MEGA Manila 2D 2.0 Base Package it's restarted and stop working I tried to Hard Reset but it doesn't hellp .
1) Hold down send/reject buttons (green/red at the front) and reset with the stylus
2) Release the stylus but keep holding the buttons till I get 'this will erase all your personal data' message
3) then press 'action' (big front button) to hard reset. But it go to start screen and after second go to black screen (or shutdown) , I can go to BOOTLOAD , but what should I do to get it work ?? Thanks !!!!
Sorry for my English !! I tried to update the rom from BOOTLOAD , after it fishish update Elf starts and go to black screen . any ideas why ?
Hi
Did you cid unlock your device before you upgraded to Onyx ?
If yes did you use Onyx for long time before installing Manilla or immediately after flashing ?
What's your IPL/SPL ?
Hello,
i have a problem, my touch dual gets stuck on the screen aligning . I try everything but nothing works.i chang the ROM i do hard reset, soft-reset but nothing.if someone has found the solution it gives me please. (sorry for my very bad english because i'm french and the english is not my speciality)
Thanks.
nobody?? it's very urgent and it's don't warranty
check 7th post from this thread
http://forum.xda-developers.com/showthread.php?t=296676
and there are many ways
i havent tried them but...well, who knows
my problem it's not to skip this but i want to align my screen and it get stucks in the alignment screen.