I'm planning to replace the battery because it lasts way less than before but if the phone gets opened will it retain the water resistance features or I will have to forget about it?
I want to have a new battery but that is one feature I don't want to lose.
I've replaced by battery and it's up to you to use the right gasket glue and apply it properly, or get someone who knows what they are doing. I've not tested mine since, but the seal is as good as the factory applied one.
There are YouTube videos on how to do it, the hardest part was separating the glass back without breaking it. Also, finding a genuine battery is very hard, as 99% of those on sale are fake.
Related
I know this is a silly question. But I cracked the back of my nexus 4 from a 1 foot drop, (out of my pocket while I was crouched down spray painting in the garage). Just before I did this I was starting to have battery issues, basically under 20% the phone doesn't charge unless its off. Even on the stock charger, it just loses power and then dies and turns off again. Its frustrating now because I lost my warranty due to cracking it.
So My question is, if I go on (Ebay) and buy that glass, will I be able to do a clean enough install that they will take it as warranty and not notice? I don't want to buy the whole back assembly because its rather expensive with all the antennas to keep everything working.
I'd like to hear your opinions, or from people who have replaced just the glass before. Thanks.
AlwaysDroid said:
I know this is a silly question. But I cracked the back of my nexus 4 from a 1 foot drop, (out of my pocket while I was crouched down spray painting in the garage). Just before I did this I was starting to have battery issues, basically under 20% the phone doesn't charge unless its off. Even on the stock charger, it just loses power and then dies and turns off again. Its frustrating now because I lost my warranty due to cracking it.
So My question is, if I go on (Ebay) and buy that glass, will I be able to do a clean enough install that they will take it as warranty and not notice? I don't want to buy the whole back assembly because its rather expensive with all the antennas to keep everything working.
I'd like to hear your opinions, or from people who have replaced just the glass before. Thanks.
Click to expand...
Click to collapse
You can do it, you just have to take off the entire back cover, peel off the NFC and charging coils, and gently pry out the glass. Look up the thread where someone put in a second battery (total of 4200 mah) in his Nexus. He has removed the (shattered) back glass off of his phone, and replaced it with a plastic housing for the 2nd battery. You could see how he got the glass off without damaging the cover. The hardest part I would think would be getting the glass to stick on while keeping the stock look. I don't know what kind of adhesive LG uses to glue on the glass, but ideally you would want to use the same kind.
lopezk38 said:
You can do it, you just have to take off the entire back cover, peel off the NFC and charging coils, and gently pry out the glass. Look up the thread where someone put in a second battery (total of 4200 mah) in his Nexus. He has removed the (shattered) back glass off of his phone, and replaced it with a plastic housing for the 2nd battery. You could see how he got the glass off without damaging the cover. The hardest part I would think would be getting the glass to stick on while keeping the stock look. I don't know what kind of adhesive LG uses to glue on the glass, but ideally you would want to use the same kind.
Click to expand...
Click to collapse
Sweet man thanks for the input I'll go take a look at the thread.
So I've had my S5 for over 2 months. I'm always very careful with my stuff. I had the original cover on the phone and once a week I would run it under cold water to wash off any grime or dirt. Everything would be fine.
Now I got the wireless charging cover and I did the same routine. I made 1000% sure it was sealed completely. Now I start to experience slow down and freezing. So much so I have to remove the battery to restart. So I take off the cover and I see water on the battery. Not a lot but this is supposed to be wster resistant. I also notice some water where the cover snaps on to the phone. I dry it all off..I also called Verizon who said I'd have to go to the store to check for water damage which I say to myself Huh? But it's water resistant. Anyways I go to the store and they see nothing wrong with it. They said I can get a like new replacement but I feel that unfair since I spent my money and its not even 3 months old.
I noticed when I got home that by the speaker win the wireless cover it's not flush against he phone. The snaps are all in place but still there's a considerable gap between the cover and phone. Then I took the cover off and put the regular cover back on and there was no gap. It's flush against. Now is it possible hbis is a defect?
And should I accept the replacement device? Right now he phone is Ok but I'm worried no one wants a damaged phone.
Also my boot screen says custom even though I haven't rooted. I even used a root checker to make sure. Only thing I did was turn off some apps and install nova.
Weird? Advice?
Ty
hakoreh said:
So I've had my S5 for over 2 months. I'm always very careful with my stuff. I had the original cover on the phone and once a week I would run it under cold water to wash off any grime or dirt. Everything would be fine.
Now I got the wireless charging cover and I did the same routine. I made 1000% sure it was sealed completely. Now I start to experience slow down and freezing. So much so I have to remove the battery to restart. So I take off the cover and I see water on the battery. Not a lot but this is supposed to be wster resistant. I also notice some water where the cover snaps on to the phone. I dry it all off..I also called Verizon who said I'd have to go to the store to check for water damage which I say to myself Huh? But it's water resistant. Anyways I go to the store and they see nothing wrong with it. They said I can get a like new replacement but I feel that unfair since I spent my money and its not even 3 months old.
I noticed when I got home that by the speaker win the wireless cover it's not flush against he phone. The snaps are all in place but still there's a considerable gap between the cover and phone. Then I took the cover off and put the regular cover back on and there was no gap. It's flush against. Now is it possible hbis is a defect?
And should I accept the replacement device? Right now he phone is Ok but I'm worried no one wants a damaged phone.
Also my boot screen says custom even though I haven't rooted. I even used a root checker to make sure. Only thing I did was turn off some apps and install nova.
Weird? Advice?
Ty
Click to expand...
Click to collapse
Well, first of all. The extended battery and cover for it were said a lonnnng time ago to not be water tight. So that's probably part of your problem.
Secondly, I would recommend using Computer screen cleaning wipes, or a microfiber cloth and a little bit of windex or other non-harmful glass cleaner to clean it instead of running cold water over it..
The more you can control what is cleaning it, the better off you are. A little more than A LOT.
kprice8 said:
Well, first of all. The extended battery and cover for it were said a lonnnng time ago to not be water tight. So that's probably part of your problem.
Secondly, I would recommend using Computer screen cleaning wipes, or a microfiber cloth and a little bit of windex or other non-harmful glass cleaner to clean it instead of running cold water over it..
The more you can control what is cleaning it, the better off you are. A little more than A LOT.
Click to expand...
Click to collapse
I'm running the stock battery and the wireless cover. I've read a lot of places it keeps the wireless seal. In fact the Samsung site States the same.
hakoreh said:
I'm running the stock battery and the wireless cover. I've read a lot of places it keeps the wireless seal. In fact the Samsung site States the same.
Click to expand...
Click to collapse
My apologies, it is still early.
I have still read on these forums that despite the claim by Samsung that it will hold the seal, users were saying it doesn't. Perhaps do a search for it and see what they say?
hakoreh said:
I'm running the stock battery and the wireless cover. I've read a lot of places it keeps the wireless seal. In fact the Samsung site States the same.
Click to expand...
Click to collapse
if you are using an official samsung accessory, you can send it back to samsung for repair. they will replace damaged parts with new ones. or you can go to verizon and get the like new one. either way, i wouldn't hold on to it if it has water damage and is acting flakey. it will never be right and by the time you get fed up with it you are out of warranty. replace it. and really, if verizon gives you a phone that is in as good a shape as the one you have, and works perfectly, who cares if someone else tried it and didn't like it and returned it.
Hobson318 said:
if you are using an official samsung accessory, you can send it back to samsung for repair. they will replace damaged parts with new ones. or you can go to verizon and get the like new one. either way, i wouldn't hold on to it if it has water damage and is acting flakey. it will never be right and by the time you get fed up with it you are out of warranty. replace it. and really, if verizon gives you a phone that is in as good a shape as the one you have, and works perfectly, who cares if someone else tried it and didn't like it and returned it.
Click to expand...
Click to collapse
I spoke to Samsung and they basically said I got a defective cover which honestly is BS. They said they can repair the phone but I wouldn't have access to a replacement and they don't provide replacements. Honestly I've always liked Samsung but now I'm thinking should I just take the replacement, sell it and get the LG G3 or something.
hakoreh said:
I spoke to Samsung and they basically said I got a defective cover which honestly is BS. They said they can repair the phone but I wouldn't have access to a replacement and they don't provide replacements. Honestly I've always liked Samsung but now I'm thinking should I just take the replacement, sell it and get the LG G3 or something.
Click to expand...
Click to collapse
At least samsung is willing to repair the phone. They could have just said it was your fault for not installing the cover correctly. I sent them a 16gb S3 a while back that I bricked. They fixed it and sent it back to me as a 32gb model. Did right by me. You aren't going to be any worse for taking the replacement verizon will give you. It will still have the same warranty plus it has the benefit of additional QA testing from factory.
Hi. This happened a while ago but I finally have the time to deal with my poor Nexus 6p. It spent a few minutes in a hot tub a few months back. Rice for more than 48 hours - nothing. Brought it to Staples where they put it in the machine that heats the gel balls (?) to remove the moisture. Charged it for a few minutes there and it actually turned on! Awesome, except the touch screen doesn't work. Battery seems to hold a charge, screen turns on and looks fine, volume and power buttons work, and I couldn't figure a way to test the fingerprint scanner or camera. Factory reset it. So now the phone is stuck to booting to the options menu with recovery mode and all that.
Is it possible to determine or guess what is wrong from this information? I've looked at the teardown, and I'd assume there is an issue with the pressure sensor, but I don't know enough about phone construction and parts to know if it's the sensor, or the part that connects the sensor to the screen, or something completely different.
I wanted to get some advice on what to do from here. Other than tossing it or leaving it forever, I have three options:
1. Repair shop: This seems like the easiest option, but potentially expensive enough that I'd be better off getting a whole new phone instead. Would a diagnosis be a separate process/transaction than the actual repair service? There are a few nearby shops for me to check out.
2. Fix it myself: The 6P seems like a pain in the ass to take apart and put back together (2/10 repairability score). I don't think it's beyond my ability, but the time and risk that it involves for me to do it myself makes me very hesitant. I also don't know exactly what I'll find inside the phone.
3. Sell it: Sell for parts and buy a new phone. If it comes to this, I need to know what I should expect to get for it. It's good hardware, and the parts that still work seem in good shape.
I wanted to consult the internet before going any further. So, how boned is my phone? Any different suggestions? Thanks for reading and I appreciate any advice.
eak.the.human. said:
Hi. This happened a while ago but I finally have the time to deal with my poor Nexus 6p. It spent a few minutes in a hot tub a few months back. Rice for more than 48 hours - nothing. Brought it to Staples where they put it in the machine that heats the gel balls (?) to remove the moisture. Charged it for a few minutes there and it actually turned on! Awesome, except the touch screen doesn't work. Battery seems to hold a charge, screen turns on and looks fine, volume and power buttons work, and I couldn't figure a way to test the fingerprint scanner or camera. Factory reset it. So now the phone is stuck to booting to the options menu with recovery mode and all that.
Is it possible to determine or guess what is wrong from this information? I've looked at the teardown, and I'd assume there is an issue with the pressure sensor, but I don't know enough about phone construction and parts to know if it's the sensor, or the part that connects the sensor to the screen, or something completely different.
I wanted to get some advice on what to do from here. Other than tossing it or leaving it forever, I have three options:
1. Repair shop: This seems like the easiest option, but potentially expensive enough that I'd be better off getting a whole new phone instead. Would a diagnosis be a separate process/transaction than the actual repair service? There are a few nearby shops for me to check out.
2. Fix it myself: The 6P seems like a pain in the ass to take apart and put back together (2/10 repairability score). I don't think it's beyond my ability, but the time and risk that it involves for me to do it myself makes me very hesitant. I also don't know exactly what I'll find inside the phone.
3. Sell it: Sell for parts and buy a new phone. If it comes to this, I need to know what I should expect to get for it. It's good hardware, and the parts that still work seem in good shape.
I wanted to consult the internet before going any further. So, how boned is my phone? Any different suggestions? Thanks for reading and I appreciate any advice.
Click to expand...
Click to collapse
You could flash the factory image but I guess you still wouldn't get past the setup screen without touch. I've been repairing electronics for 10+ years and if it came into my work I would disassemble it and look for obvious signs of damage/corrosion at the screen/digitizer connections, and look for track marks on the motherboard where a short could have occurred, or blown fuses/resisitors/diodes for the digitizer. Beyond that it's really a matter of swapping in a screen assembly (we have cracked glass 6p lcd assemblies that would work fine as a test unit). If that doesn't fix it, I'd order a main board. Having said that, it's not a phone I would want to own or even repair for a customer without telling them about the potential for future issues from the water damage. PM me if you want to sell it cheap for parts.
Screen and digitizer assembly is 'only' $60 - $80 on ebay or ali. So that is worth the risk. If this is not the problem you can sell it again for the same price, so no money loss here.
Waiting a few months though, is a long time to wait to dry your electronic devices. When it happens the best is to take it apart immediately to avoid corrosion.
The 6P is not easy to take apart, but it is do-able. Hardest part is the glass on the back. But if it cracks, a replacement will cost you less then 10 bucks.
What I would do is order the screen, take the phone fully apart, if there is a lot of corrosion, wash the mainboard in a contact cleaner (or if you don't have this, wd40 could work) then wash it with alcohol (to remove the wd40) and let it dry. Assemble the phone with the new screen, and hopefully it works. This way I fixed an Oneplus One 6 months ago, and it is still running perfectly.
To add a bit of clarification - use 99% USP Isopropyl Alcohol. It shouldn't be more than five bucks at your local pharmacy (Shoppers Drug Mart in Canada sells it for $1.99 for 500mL).
While using the 75% USP won't cause any serious issues, it is diluted with water, as it's more of an antiseptic (I can explain why 75% is better for wound cleansing than 99% if anyone wishes), and you'd just be prolonging the drying/repair process.
Use a lint-free cloth to dab the components - keep it away from the battery terminals on the battery itself. It is OK to clean the connecting terminals on the motherboard though. There are sandwich clips all over the LCD/motherboard, so be extra careful dabbing the cloth in there - one bent pin in any of those clips and your phone will need to be sent away for repair by a specialist.
DO NOT POUR IT ALL OVER THE COMPONENTS OR LEAVE IT SOAKING IN ANY AMOUNT OF ALCOHOL.
Dear all,
Could someone please tell me how a battery of S7 edge is replaced? If i give it at an official outlet, and get it replaced, can someone from other place while selling the phone, come to know that the phone was opened?
They have to weaken the glue on the back of the phone (the machine they use to do this also weakens the glue on the screen.). Then they lift off the back glass and replace the battery.
If you get this done at a Samsung Certified Repair outlet then you would never be able to tell that it had been done and the phone will remain water resistant. If you have this done elsewhere, there's a high chance they will not do a great job, leaving gaps and the chance water could get inside the phone.
While it is fresh in my mind.
1) The seam for the back is not along the surface, it is along the edge. The silver part and the glass is where you want to attack. It is going to be hot, wear gloves.
2) Don't use metal tweezers around the battery connector as it is always hot. I accidentally shorted the old battery and was afraid I'd also hit the motherboard but apparently did not.
3) The battery is glued in SOLID even though it appears to be a tight spot. The thing is, there are flat cables underneath (see photo) and the screen so you have to be careful. I have read not to use heat on it but I think you almost have to use a little. There is the frame between the battery and the screen, but too much leverage could easily damage the screen. I did not glue my new battery down. We will see.
4) If the thing turned on (or you turned it on) without the fingerprint sensor connected, you will need a reboot to find the fingerprint sensor. At first, I thought I had not seated the cable but then it dawned on me to reboot before I took the cable bracket and cable back off. That fixed it.
I managed to chip the midframe a little in one spot. Not bad and invisible in the case. Not very noticeable without the case. In fact, I didn't glue the back down yet because my case holds it all together with no issues and I thought I'd take a day or two to make sure nothing is going to pop loose in there.
Thanks for the write up.
Did you end up reusing the old battery door adhesive or go with a new one?
Wasn't sure from your post.
Also how's the new battery holding up?
wd5gnr said:
While it is fresh in my mind.
1) The seam for the back is not along the surface, it is along the edge. The silver part and the glass is where you want to attack. It is going to be hot, wear gloves.
2) Don't use metal tweezers around the battery connector as it is always hot. I accidentally shorted the old battery and was afraid I'd also hit the motherboard but apparently did not.
3) The battery is glued in SOLID even though it appears to be a tight spot. The thing is, there are flat cables underneath (see photo) and the screen so you have to be careful. I have read not to use heat on it but I think you almost have to use a little. There is the frame between the battery and the screen, but too much leverage could easily damage the screen. I did not glue my new battery down. We will see.
4) If the thing turned on (or you turned it on) without the fingerprint sensor connected, you will need a reboot to find the fingerprint sensor. At first, I thought I had not seated the cable but then it dawned on me to reboot before I took the cable bracket and cable back off. That fixed it.
I managed to chip the midframe a little in one spot. Not bad and invisible in the case. Not very noticeable without the case. In fact, I didn't glue the back down yet because my case holds it all together with no issues and I thought I'd take a day or two to make sure nothing is going to pop loose in there.
Click to expand...
Click to collapse
tiguy99 said:
Thanks for the write up.
Did you end up reusing the old battery door adhesive or go with a new one?
Wasn't sure from your post.
Also how's the new battery holding up?
Click to expand...
Click to collapse
After about a week with it in the case, the old adhesive was stuck on good so I left it alone. The new battery is holding up well. Phone is no longer my daily driver, though, but the battery is great.
wd5gnr said:
After about a week with it in the case, the old adhesive was stuck on good so I left it alone. The new battery is holding up well. Phone is no longer my daily driver, though, but the battery is great.
Click to expand...
Click to collapse
Replaced my battery last night. End up reusing my old adhesive which worked out well. When it was still hot/soft, I took a flat head screwdriver and lightly drew the adhesive back flat on the surface as much as I could before beginning the full teardown.
That did the trick for me.
As for the battery itself, you're right... the battery is in there with some very strong adhesive. Had to actually use my heat gun to soften the adhesive and free it. For me, it wasn't coming out any other way and this part took the longest.
Didn't heat the battery directly as I didn't want to burn it so I heated the area from the screen side....be very careful as you do this as the screen can get burned as well. (Don't ask me how I know)
Overall the new battery is working very well and the phone feels like it did day 1 again. Can't wait to see the SOT time later this evening
Edit see attached...almost 5 hours again with 25% left with normal use and auto brightness on Nougat. Can easily see 6 hours at this rate! Very impressed
Damn this looks more complicated then changing it on an iPhone
xsacter said:
Damn this looks more complicated then changing it on an iPhone
Click to expand...
Click to collapse
YMMV but personally I can vouch that its one of the more time consuming and challenging repairs vs usual iPhone jobs. They use some type of space age adhesive that quite difficult to remove. Most of the repair is trying to gently remove the back glass, battery and screen. If you can quickly get those out without damaging the components, the rest of the repair is simple.
Are there replacement backs? My battery lasts maybe an hour of SoT at this point. I've tried factory resetting it. I'm tempted to get a new phone (because I'd like security updates), but the H8 is still fast enough to use. Mostly not knowing what I'm doing I figure breaking the back is fairly likely.