Database Users

[help] Buying a bricked tf300

Hello guy,
I have the possiblity to buy a tf300 wich is bricked. And I would like to know if someone could tell me if it's fixable.
The guy says that he unlocked the bootloader, apparently it worked fine and the he flash a TWRP 2.6.3.0 then it went bad. He says the tablet is directly booting up into recovery (at least that's working) that TWRP says "Omb" whatever that means and that he doesn't see any files into recovery, only folders and subfolders (isn't supposed to be normal, I mean doesn't the recovery only display .zip files ??). He says volume down + power doesn't work, adb gives a " protocol failure" and fastboot is waiting for device (but I'm gessing it's normal since he can't boot into menu obviously fastboot is not working).
So what do you think is it fixable?
Thanks

the guy gave me 2 images of the recovery:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Apparently the password asked on the screenshots is here because the recovery can't mount the storage partitions. Clearly he flash the wrong recovery. He says that he can't get fastboot because he can't install driver (something I could figure out how to do ).
My last question is, will I get fastboot in this recovery, dispite the storage not mounting and the incompatibility?
if yes then I can do a "fastboot getvar all" to get bootloader version and flash the right recovery? What do you think??
thanks

ayziaa said:
Apparently the password asked on the screenshots is here because the recovery can't mount the storage partitions. Clearly he flash the wrong recovery. He says that he can't get fastboot because he can't install driver (something I could figure out how to do ).
My last question is, will I get fastboot in this recovery, dispite the storage not mounting and the incompatibility?
if yes then I can do a "fastboot getvar all" to get bootloader version and flash the right recovery? What do you think??
thanks
Click to expand...
Click to collapse
that has append to me couple of times( i think 3 -4 times actually) , if you are confident you can get fastboot and ADB working should be really easy to fix. but ull have to flash ASUS blob file then start over like if it was a new tablet

ayziaa said:
Apparently the password asked on the screenshots is here because the recovery can't mount the storage partitions. Clearly he flash the wrong recovery. He says that he can't get fastboot because he can't install driver (something I could figure out how to do ).
My last question is, will I get fastboot in this recovery, dispite the storage not mounting and the incompatibility?
if yes then I can do a "fastboot getvar all" to get bootloader version and flash the right recovery? What do you think??
thanks
Click to expand...
Click to collapse
Yeah I ran into that bug personally and I fixed is in less than 5 minutes with the right setup. Of course, it could be a different situation but there is the chance that it is easily fixable.

Sadly the guy allready sold it. Thank you guy for replying

help
Hi guys....
on my bad luck, looks like I did the same thing.... I had CMB Roms cmb4.4.2 with Philz CWM v6.0.4.5, as I did like this, I went to flash another rom. So, I put the TWRP 2.6 on sdcard with Cromi rom.... flash recovery, reboot and there it stock on recovery and state just like on pictures ...
I can go with ABD but not FASTBOOT... my sdcard is SYSTEM when I mount the system from twpr !!!!
can someone help me ?

srdjank said:
Hi guys....
on my bad luck, looks like I did the same thing.... I had CMB Roms cmb4.4.2 with Philz CWM v6.0.4.5, as I did like this, I went to flash another rom. So, I put the TWRP 2.6 on sdcard with Cromi rom.... flash recovery, reboot and there it stock on recovery and state just like on pictures ...
I can go with ABD but not FASTBOOT... my sdcard is SYSTEM when I mount the system from twpr !!!!
can someone help me ?
Click to expand...
Click to collapse
You put the wrong version of TWRP on your tablet probably? when you restart and it boots into TWRP, on the starting screen you should be able to use fastboot.
---------- Post added at 04:33 PM ---------- Previous post was at 04:31 PM ----------
When it happened to me, it was a bootloader and TWRP conflict: I flashed the jb version instead of the -42 Version. to fix it, I did fastboot reboot bootloader and then got back into android and flashed the correct one from Terminal Emulator. Or you could just flash it from there.

cmendonc2 said:
You put the wrong version of TWRP on your tablet probably? when you restart and it boots into TWRP, on the starting screen you should be able to use fastboot.
---------- Post added at 04:33 PM ---------- Previous post was at 04:31 PM ----------
When it happened to me, it was a bootloader and TWRP conflict: I flashed the jb version instead of the -42 Version. to fix it, I did fastboot reboot bootloader and then got back into android and flashed the correct one from Terminal Emulator. Or you could just flash it from there.
Click to expand...
Click to collapse
nope, I can't use it, if you meen on blue screen when twrp starts, when it boots is the same.... fastboot devices command and it just don't do anything, when twrp boots adb devices turn up : 0123456789ABCDEF recovery
I tryed meny things but I can get it to boot in bootloader with tree options....
when I type fastboot -i 0x0B05 flash c:\Android SDK\sdk\platform-tools\blob
just says <waiting for device> and stays that way.... tryed to reset tab with pin let it boot but nothing ...

srdjank said:
nope, I can't use it, if you meen on blue screen when twrp starts, when it boots is the same.... fastboot devices command and it just don't do anything, when twrp boots adb devices turn up : 0123456789ABCDEF recovery
I tryed meny things but I can get it to boot in bootloader with tree options....
when I type fastboot -i 0x0B05 flash c:\Android SDK\sdk\platform-tools\blob
just says <waiting for device> and stays that way.... tryed to reset tab with pin let it boot but nothing ...
Click to expand...
Click to collapse
What is your OS of your PC??

cmendonc2 said:
You put the wrong version of TWRP on your tablet probably? when you restart and it boots into TWRP, on the starting screen you should be able to use fastboot.
---------- Post added at 04:33 PM ---------- Previous post was at 04:31 PM ----------
When it happened to me, it was a bootloader and TWRP conflict: I flashed the jb version instead of the -42 Version. to fix it, I did fastboot reboot bootloader and then got back into android and flashed the correct one from Terminal Emulator. Or you could just flash it from there.
Click to expand...
Click to collapse
lj50036 said:
What is your OS of your PC??
Click to expand...
Click to collapse
HE's ALIVE ....
:fingers-crossed::fingers-crossed::fingers-crossed:
I''m on WIN7 64...... like I said I boot it up, all I needed is command : abd reboot-bootloader
that cat me in bootloader mode, with http://forum.xda-developers.com/showpost.php?p=44244313&nocache=1&z=9056634965818376
I boot it up on stock 4.2.1 JOP40D.ww_epad-10.6.1.8-20130225
sorry for trouble ...... thanks all for trying to help ....

ZE500KL revert to lollipop bootloop

Is there a fix for this....
I have updated my zenfone laser ze500kl to marshmallow but then i decided to revert back to the .222 firmware...(which is wrong i guess)
So I flashed the zip through the default recovery and it successfully finnished but when i reboot my phone, it is stuck on the spinning circle thing / boot screen... I even let it that way overnight, still no luck.
Is there a way to fix this?
P.S.
I cant even go to recovery from this point, but fastboot is working fine
Offline charging ia also ok so i can fully charge the phone even not booted to android.

rozene05 said:
Is there a fix for this....
I have updated my zenfone laser ze500kl to marshmallow but then i decided to revert back to the .222 firmware...(which is wrong i guess)
So I flashed the zip through the default recovery and it successfully finnished but when i reboot my phone, it is stuck on the spinning circle thing / boot screen... I even let it that way overnight, still no luck.
Is there a way to fix this?
P.S.
I cant even go to recovery from this point, but fastboot is working fine
Offline charging ia also ok so i can fully charge the phone even not booted to android.
Click to expand...
Click to collapse
Use fastboot to wipe the data partition of your phone using this command
Code:
fastboot erase data
Please press the thanks button if I helped you.
Sent from my C2305 using Tapatalk

abhishekr700 said:
Use fastboot to wipe the data partition of your phone using this command
Code:
fastboot erase data
Please press the thanks button if I helped you.
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
here is my result:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

rozene05 said:
here is my result:
Click to expand...
Click to collapse
Tried adb?
Please press the thanks button

Download .222 recovery from here
then flash with this command:
Code:
fastboot flash recovery <PATH OF THE FILE>
boot into recovery mode and 'wipe data/factory reset'
it will rollback to factory default, and clean all user data, but keep the files in internal storage.
next time, remember make a backup before you upgrade or modify the phone.

MiauLightouch said:
Download .222 recovery from here
then flash with this command:
Code:
fastboot flash recovery <PATH OF THE FILE>
boot into recovery mode and 'wipe data/factory reset'
it will rollback to factory default, and clean all user data, but keep the files in internal storage.
next time, remember make a backup before you upgrade or modify the phone.
Click to expand...
Click to collapse
thanks for the link for the recovery.. i've been looking for this.... luckily i dont have anything to lose on my phone... backing up really helped a lot..
i'll keep you posted if anything happens..

MiauLightouch said:
Download .222 recovery from here
then flash with this command:
Code:
fastboot flash recovery <PATH OF THE FILE>
boot into recovery mode and 'wipe data/factory reset'
it will rollback to factory default, and clean all user data, but keep the files in internal storage.
next time, remember make a backup before you upgrade or modify the phone.
Click to expand...
Click to collapse
thanks so much this actually solved my problem!!!
since i cant really go to recovery mode..
right after flashing the default recovery, i installed the .222 zip from asus..

MiauLightouch said:
Download .222 recovery from here
then flash with this command:
Code:
fastboot flash recovery <PATH OF THE FILE>
boot into recovery mode and 'wipe data/factory reset'
it will rollback to factory default, and clean all user data, but keep the files in internal storage.
next time, remember make a backup before you upgrade or modify the phone.
Click to expand...
Click to collapse
there isnt anything happen

rozene05 said:
thanks for the link for the recovery.. i've been looking for this.... luckily i dont have anything to lose on my phone... backing up really helped a lot..
i'll keep you posted if anything happens..
Click to expand...
Click to collapse
Your a Legend, I also have been looking for this file for ages and and have finally resurrected my mobile.

MiauLightouch said:
Download .222 recovery from here
then flash with this command:
Code:
fastboot flash recovery <PATH OF THE FILE>
boot into recovery mode and 'wipe data/factory reset'
it will rollback to factory default, and clean all user data, but keep the files in internal storage.
next time, remember make a backup before you upgrade or modify the phone.
Click to expand...
Click to collapse
Hello can you please help me.
OS Version: 222 lollipop
i have rooted my phone successfully and flashed TWRP Via flashfy app. rebooted and it didnt boot again. it was on stock recovery only didnt get twrp. now unable to get into fastboot mode and stuck at asus logo, can enter stock recovery mode. i have tried sideload process with current frimware all done with out problem but still at asus logo. still cant get into fastboot mode.
why ze500kl frimware file dont have recovery img, droid img, while all other asus model phones have this img files.
where can i get the original recovery img for ze00kl?
When i sideload. it is showing ERROR ON ANDROID SYMBOL TOO.
I AM WAITING FOR YOUR REPLY PLEASE HELP
---------- Post added at 06:00 PM ---------- Previous post was at 05:25 PM ----------
MiauLightouch said:
Download .222 recovery from here
then flash with this command:
Code:
fastboot flash recovery <PATH OF THE FILE>
boot into recovery mode and 'wipe data/factory reset'
it will rollback to factory default, and clean all user data, but keep the files in internal storage.
next time, remember make a backup before you upgrade or modify the phone.
Click to expand...
Click to collapse
Asus ze500kl version: 222

boot my twrp again should fix this problem,
or unlock bootloader with my unlock tool to fix this.

Why you want to downgrade?

bro please help me about my problem.
MiauLightouch said:
boot my twrp again should fix this problem,
or unlock bootloader with my unlock tool to fix this.
Click to expand...
Click to collapse
only you can solve my problem please bro. waiting for your reply

do you do anything what i said?
if do, it would be solved.
please describe the detail what you want.

MiauLightouch said:
do you do anything what i said?
if do, it would be solved.
please describe the detail what you want.
Click to expand...
Click to collapse
bro thanks for the reply.
My Phone is Asus ZE500KL, Lollipop, WW 222 Frimware.
i have rooted my phone successfully with your process and While i was flashing TWRP via flashify app... flashed successfully and when i rebooted. it was still on stock recovery only and phone is stuck at asus screen. now i am unable to enter into fastboot mode. when i try to enter... it reboots like normal boot and stuck at logo.
twrp downloaded from this link
i sideloaded 222 zip successfully but still stuck at logo. PLEASE BRO HELP ME
few monts back i got a problem and fixed it. here is the thread
NEVER TRIED TO UNLOCK BOOTLOADER TILL THIS DAY BUT EVERYTHING WORKED FINE FOR ME.
i rooted, unrooted 3-4 times flashed another twrp. this is the first time i downloded twrp from that link. but i only uploded it

when you stuck on asus logo, it's fastboot mode.
as I said, boot "MY twrp" then reboot, would fix your problem.
you didn't do that, right?
ANOTHER way is unlock bootloader, that's all.

MiauLightouch said:
when you stuck on asus logo, it's fastboot mode.
as I said, boot "MY twrp" then reboot, would fix your problem.
you didn't do that, right?
ANOTHER way is unlock bootloader, that's all.
Click to expand...
Click to collapse
thanks bro... thanks for spending your valuable time to reply me. :victory: . you made it work again. you are great.
and sorry i didnt do when you said first time. i thought you replied for some other
i want to know few things
Bro is it necessary to unlock bootloader. what happens if we don't unlock and root, install twrp & xposed.
if we did something and the phone is bricked what is the best way to recover it? by reflashing the current rom?

Device is not detected when trying to flash TWRP

okay hello people.
here is my situation.
i was about to revert back to kitkat from ED300 CM12.1, and i suddenly wipe off and formatted my internal storage.
and now ofcourse i cant boot in and what i did was trying to reinstall TWRP through fastboot and minimal adb from PC.
*i tried to flash Lenovo_A6000_TWRP-3.0.2-0_x64-L_by_SevenMaxs
*i cant go into download mode (vol+,vol-,power) button.
so i went to fastboot mode (vol-,power) button until the 'powerkey long press can reboot phone' appear , and i plug in my phone to pc and when i type in command for -adb devices, no device appear.
figure out it was okay, i go ahead and proceed with - fastboot boot recovery.img command.
then it shows
FAILED (remote: dtb not found)
and im stuck there. idk what else to do, which guide to follow to bring my phone back to life.
i have did hours of searching but nothing works. really need a magic here.
thanks guys for ur time

rizarulaltiz said:
okay hello people.
here is my situation.
i was about to revert back to kitkat from ED300 CM12.1, and i suddenly wipe off and formatted my internal storage.
and now ofcourse i cant boot in and what i did was trying to reinstall TWRP through fastboot and minimal adb from PC.
*i tried to flash Lenovo_A6000_TWRP-3.0.2-0_x64-L_by_SevenMaxs
*i cant go into download mode (vol+,vol-,power) button.
so i went to fastboot mode (vol-,power) button until the 'powerkey long press can reboot phone' appear , and i plug in my phone to pc and when i type in command for -adb devices, no device appear.
figure out it was okay, i go ahead and proceed with - fastboot boot recovery.img command.
then it shows
FAILED (remote: dtb not found)
and im stuck there. idk what else to do, which guide to follow to bring my phone back to life.
i have did hours of searching but nothing works. really need a magic here.
thanks guys for ur time
Click to expand...
Click to collapse
BTW if "fastboot devices" not showing any devices then try to properly install fastboot on computer."fastboot boot twrp.img" is command for boot the twrp without flashing.
try "fastboot flash recovery twrp.img" .
p.s:-Try to flash different recovery file.It may be corrupted.

i-AM-BoReD said:
BTW if "fastboot devices" not showing any devices then try to properly install fastboot on computer."fastboot boot twrp.img" is command for boot the twrp without flashing.
try "fastboot flash recovery twrp.img" .
p.s:-Try to flash different recovery file.It may be corrupted.
Click to expand...
Click to collapse
did it as your advice,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then i reboot the phone, still cant manage to go into recovey. it stuck there at lenovo logo.
tried with different recovery image, still the same

rizarulaltiz said:
did it as your advice,
then i reboot the phone, still cant manage to go into recovey. it stuck there at lenovo logo.
tried with different recovery image, still the same
Click to expand...
Click to collapse
As i can see that it is saying device not found but flshing is succeeded.
Editlz try to install fastboot properly.Look here

i-AM-BoReD said:
As i can see that flashing is successful.For entering to recovery r u using button combo or command?
Click to expand...
Click to collapse
i use button combo.
vol+, vol-, power button

rizarulaltiz said:
i use button combo.
vol+, vol-, power button
Click to expand...
Click to collapse
Here is the possibilities:-
1)May be fastboot is not properly installed .I gave a link in the previous post for that. "device not found" that shouldn't be appear.
2)Try vol+ +power button
3)Try if stock recovery can be flashed by fastboot.Link.if can be then let me know.
4)If not then run this command in adb
Code:
adb shell
ls -al /dev/block/platform/dw_mmc/by-name
and give a screen shot.

Did you flash kitkat ROM after this or before this fuss?
If Yes, then you need to flash TWRP for kitkat firmware.

https://drive.google.com/file/d/0B8_p5nNeW71VRFZnc3cwb2hLR28/view?usp=sharing
download the above recovery and download flashify from playstore . Flash the recovery that you downloaded from above link with flashify and reboot and in the next step you will be in the recovery

Try this
http://forum.xda-developers.com/len...lenovo-a6000-plus-stuck-booting-logo-t3437378
LP/MM TWRP 2.8.7.7 https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
KK TWRP 2.8.6.1 https://drive.google.com/file/d/0B3yAzE4FH2e7RU5helVWd0dBUGM/view?usp=drivesdk

i-AM-BoReD said:
Here is the possibilities:-
1)May be fastboot is not properly installed .I gave a link in the previous post for that. "device not found" that shouldn't be appear.
2)Try vol+ +power button
3)Try if stock recovery can be flashed by fastboot.Link.if can be then let me know.
4)If not then run this command in adb
Code:
adb shell
ls -al /dev/block/platform/dw_mmc/by-name
and give a screen shot.
Click to expand...
Click to collapse
1.fastboot is properly installed
2.still nothing
3. tried this and it worked. i can boot into recovery now.
now i should flash the stock rom right?

rizarulaltiz said:
1.fastboot is properly installed
2.still nothing
3. tried this and it worked. i can boot into recovery now.
now i should flash the stock rom right?
Click to expand...
Click to collapse
Then ur device is good to go.I found a recovery flashble stock rom in help or guide thread few days ago.Search it.
Also if there is recovey flashable T.W.R.P available somewhere u can flash it also.
Edit:-Here is a zip file of T.W.R.P.But version is 3.0.0.1.Don know if it can be flaahed by Stock recovery or not.Give it a try.If succeeded then no need to flash whole stock rom.You know that already.

i-AM-BoReD said:
Then ur device is good to go.I found a recovery flashble stock rom in help or guide thread few days ago.Search it.
Also if there is recovey flashable T.W.R.P available somewhere u can flash it also.
Edit:-Here is a zip file of T.W.R.P.But version is 3.0.0.1.Don know if it can be flaahed by Stock recovery or not.Give it a try.If succeeded then no need to flash whole stock rom.You know that already.
Click to expand...
Click to collapse
after i manage to flash stock recovery, i flash TWRP-2.8.6.1_A6000. then i boot into TWRP and format my internal storage, then continue flashing back ED 300's CM12.1.
and my device is back onlinee! Thanks brother for the help!!!

rizarulaltiz said:
1.fastboot is properly installed
2.still nothing
3. tried this and it worked. i can boot into recovery now.
now i should flash the stock rom right?
Click to expand...
Click to collapse
I am facing the same problem of adb device not listed , please share how it worked for you

Fix bootloop in redmi note 3 (no recovery ,no edl mode)

After trying to flash the latest 7.1.1 cm 14 ropms many people ended up in bootloop where your phone switch on ,shows mi logo and rebbot again. Many where not able to enter recovey mode also.. Now i come up with a perfect soluton for you all on how to fix these issues in your phone..Lets Get started..
If anything goes wrong iam not responsible.Do it At your Own Risk.
Requirements
------------------
1. Enter edl .rar (attached below)
2.Miui Stock Rom (FastBoot). Download it from(only use this version) here
3.Phone Must have Charge of 50% or more.
4.Unlock Boot loader.zip (Attched Below)
6.MIPhone Tools and install it .Get it from here
6.Extract all the file
7. PDA Net.(Optional,but installing will be useful). Get it from here
Once you have all of the file we can move on
Steps
------
1. Put Your Phone into fastboot mode by pressing Vol Down and power button at same time.
2.Connect your Phone With Your PC
3.Run EDL Mode.exe from the zip Enter edl.. Now your phone must be in edl mode. You can see a light blinking at the top of your phone.
4. From the Unlock Boot Loader folder copy "emmc_appsboot.mbn" to the rom folder ie)
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global--> images--> paste it there (replace/overwrite if existing)
5. Once the above step is done, Open MIFlash tool as administrator. Browse the folder
kenzo_global_images_V7.1.8.0.LHOMICL_20160129.0000.14_5.1_global and select it..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6.From the drop Down Menu Select Advanced.
7.Set Fastboot Script As Flash_ALL.Bat.
8.Set Flash Programmer As prog_emmc_firehose_8976_ddr.mbn from images folder.
9. Set RAW Xml File as rawprogram*.xml from images folder
10. Set Patch XML File as patch*.xml from images folder.
11. Video Help HERE.... Watch from 2.40 (Ignore the other portion,We dont need that Part)
Special [email protected] for the video.. I didn't made that video..
12. Once The Above step is done. Click REFRESH OPTION,and you will see Phone detected By The Name COMXX.(XX will be a number)
13.Click Flash and Wait for some time and allow the phone to reboot.
14.Once all the step is done your phone will be good to use..:fingers-crossed: :fingers-crossed:
UNLOCKING BOOT LOADER AND INSTALLING TWRP AGAIN
-------------------------------------------------------------------------
1.Once Your Phone Reboots successfully enable USB Debugginf From Developer Option.
2.Connect Your phone to your PC and Open CMD as administrator.
3.Type in "adb devices".
4. Cmd will show a random number and Device (Everyone will be knowing this,but for info only iam writing it here)
5.Type "adb reboot bootloader". Now your phone will boot into fastboot mode.
6.Type "fastboot oem device-info" to get device status.
7.Type "fastboot oem unlock-go" to unlock bootloader.
8.Again type "fastboot oem device-info" to check to find if device is unlocked.(Do not reboot YET)
9. Now Downlaod TWRP from HERE
10. Now Got to the folder containig TWRP . By holding the Shift Key Of key Board ,right click the mouse and select OPEN COMMAND WINDOW HERE.
11. Type "fastboot flash recovery recovery_filename.img"
12.Type "fastboot reboot".
You Phone will be good to go. If anything goes wrong or you have any doubt Comment Below do not pm me..i will not reply..
If this thread helpef you thumbs up and do comment and shre this post

So i do not need to unlock the boot loader before using MiTool to flash phone via EDL

ahh988 said:
So i do not need to unlock the boot loader before using MiTool to flash phone via EDL
Click to expand...
Click to collapse
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool

adithyan25 said:
Nope if phone is bricked enter fastboot mode and run enter edl.exe to enter edl,flash ROM using mi flash tool
Click to expand...
Click to collapse
I did that but phone is still stuck . I'm getting infinite boot animation ?

ahh988 said:
I did that but phone is still stuck . I'm getting infinite boot animation ?
Click to expand...
Click to collapse
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed

adithyan25 said:
Boot animation or simply mi logo and then vibrating and again rebooting???
If mi flash tool shows successfully done without any errors then
Try this
Roeboot to fast boot and type
fastboot oem unlock-go
I guess it will be fixed
Click to expand...
Click to collapse
I am stuck at boot animation with the three white dots spinning for ever ? will try to do as you said

I tried fastboot oem unlock-go but i get response: token verification failed and device still stuck on bootanimation

well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful

nitephoenix said:
well, i think this caused by relocking bootloader after we flash a new firmware. if that happens, just go in fastboot mode by hold power button + volume down, then unlock it again using mi unlock. reboot it..your twrp is back.
no need to enter edl mode & install twrp again, btw thanks..this is helpful
Click to expand...
Click to collapse
always my pleasure
For some mi unlock stucks at 50%.. I was one of them...every time I try fails...so I found this was the only way for those who can't access it using mi unlock

tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted

nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
Yeah...I know that...but it does not support volte. .only abhisheks fw sprt volte

nitephoenix said:
tips to avoid relocking bootloader, when u want to flash a new firmware..just delete emmc apsbot.mbn file inside the firmware using winrar or etc, or u can use psy-man firmware because the emmc file has been deleted
Click to expand...
Click to collapse
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks

Pleroma said:
@nitephoenix
Can we then flash update marshmallow global firmware this way? (Just delete emmc apsbot.mbn file inside the firmware). Thanks
Click to expand...
Click to collapse
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe

nitephoenix said:
don't flash official miui from twrp (you better do it in edl mode), but yes you can flash custom miui like miui eu, miuipro, multirom, epic miui etc from twrp. and..after u delete the emmc file inside the firmware which is included on every miui rom, your bootloader will be safe
Click to expand...
Click to collapse
I used to flash it via twrp ..(by deleting bootllader file) followed by flashing lazyflasher...I didn't faced any prblm yet

Mine behaves different
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.

sarabeshsab said:
I tried restoring the backup it started to back up and completed sucessfully but when i reboot there comes Mi logo and again it boots to TWRP Recovery .... Same case with any ROM ... Kindly tell me what to do.
ZCX recovery i have.
Click to expand...
Click to collapse
Probably the problem with bootloader file

not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.

Jjleininger said:
not a whole lot of talk anywhere else so i'll try here. i just got my kenzo few days ago, jumped the gun and started trying to get twrp on it. i'm assuming the bootloader was locked. As of right now it wont boot up, its in edl mode maybe... red led flashes and i can upgrade driver to 9008. sometimes its recognized by miflash and when it is and i try to flash stock fastboot it gives me an error. i know thats a lot to take in but i'm trying to cover all my bases. the phone came from overseas so sending it back isnt really an option. any help is appreciated.
Click to expand...
Click to collapse
Download eiter China based ROM or ROM from post.
Mi flash tool have many prolems.
Some tips:-
Make sure driver enforcement is disabled in PC.
All drivers including PDA net is installed.
Copy paste the unlocked bootloade file inside images folder and replace original one. Even after tryig this method it fails try my other method unbrick viafasrboot

uhm, this does not work for some reason...
i did everything as you said but in the end it just says cathasrophic error and something

After flashing i get Mi logo, vibration and reboot, please help

I have problem with recovery. Help please !

Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you mean this screen ^ that is a normal screen that appears, with every power up / restart, after the bootloader has been unlocked.
I think of it as a "red badge of courage".
As to the question about adb commands, what is it that you are trying to accomplish?

Some more information is needed to help you.
What is your model (h870, us997)?
Are you sure you properly installed twrp (reboot to bootloader, fastboot flash recovery twrp.img)?
Which version of twrp did you use (official, Melina, eliminater's (recommended))?
Regarding your adb problem - do you fail to reboot to recovery using adb from within? Have you tried to turn it off and on again?? I mean, turn it off and try the button combination to enter recovery (turn on holding vol- and power, when logo appears, release power and quickly press again and keep holding both until "factory reset", confirm twice).
Information is key!
PS as the previous poster wrote - if you unlock your bootloader you get the warning screen, just ignore it.

niksjdm said:
Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.
Click to expand...
Click to collapse
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps

Mnky313 said:
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps
Click to expand...
Click to collapse
THANK YOU SO MUCH .. It works .. The problem was in the buttons.

I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..

Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!

niksjdm said:
I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..
Click to expand...
Click to collapse
grushnickij said:
Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!
Click to expand...
Click to collapse
Yes, I use Melina TWRP, flash Version rel_o2 (or latest) using the method I said above.

Where i can find those versions of Twrp ( melina, eliminater ) ?

niksjdm said:
Where i can find those versions of Twrp ( melina, eliminater ) ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g6/development/twrp-t3828254
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-2-1-unofficial-fixes-t3722199
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-lg-g6-us997-unofficial-t3629883
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-1-x-t3627595