Database Users

Need Help..Weird Issue

Hi Guys, I am sorry for posting in wrong threads. My phone is SM-G910S(Galaxy Round).
I hope somebody can help with my issue.
I have been trying to flash and reflash original firmware with Odin with no success.
Problems:
1. Blank Download Mode(I can only press the Vol Down+Home Button+Power Button, then Vol Up, No display at all)
2.Corrupt Recovery

And here is my partition info

I had exact same problem with my last Note 3 (SM-N900L-Korean Version LGU+), exactly the same issue after trying to flash custom rom.
I had it fix after I tried to install leaked firmware for N900L(ALL_N900LKLUBMJA_N900LLGTBMJA_2010008_REV03_user_low_ship_MULTI_CERT.tar which I found somewhere from Chinese Web). But for this SM-G910S, I am totally lost.
Perhaps, someone has Galaxy Round(KitKat) Low Level Firmware and can share with me..Thanks
Here's what I've been trying:
1. I also did flashing with SM-G910S .PIT files which I made from NG5 Firmware.(No Success)
2. I downgraded to early KK firmware(NB3).(No Success)
3. I tried to reflash each partitions( mmcblk0p1 to mmcblk0p25) one by one, using terminal dd if of command.(No success)
4. I tried flashing MJ2(Jelly Bean Bootchain, aboot.mbn, sbl1.mbn, rpm.mbn, tz.mbn and sdi.mbn), Bricked the phone then I unbricked with
debrick.img but still No success.
5. Knox 0x1 since last year.
6. SuperSU Pro 1.24 stuck on Disable Knox notification.

droidan said:
Hi Guys, I am sorry for posting in wrong threads. My phone is SM-G910S(Galaxy Round).
I hope somebody can help with my issue.
I have been trying to flash and reflash original firmware with Odin with no success.
Problems:
1. Blank Download Mode(I can only press the Vol Down+Home Button+Power Button, then Vol Up, No display at all)
2.Corrupt Recovery
Click to expand...
Click to collapse
So your problem is corrupt recovery and blank download mode, the phone still can work fine?
Can you show me all info in the Phone INFO ★Samsung★ app to make sure the firmware was installed properly?
(e.g Bootloader version, CSC version...)
.

Samsung SM-G910S HArd Bricked
my samsung SM-G910S no download mode no recovery no bootup.. can anybody plz give me the unbricked debricked img..... From many munths i have been surching about that issue but i dont got success about to clear this issue... dont you people have Samsung SM-G910s in the Word..? becuz i googled about this model but every where in the world that bloody file dont have to any body... hay guyz help if you can...

[Q] When attempt to recovery, it shows "NO COMMAND"

I have a pretty weird problem with my i9500 which just updated to 5.0.1 Build#I9500ZSUHOC2
I used odin 3.10.6 to flash open TWRP 2.8.4.
Everything goes smooth and restart successfully than I turn it off to enter Recovery by press HOME + Up volume + Power and see the logo flash twice.
And it shows "no command" than enter stock recovery (e3).
This is not my first S4 but previous is i9505 and this new one is i9500, so I am pretty sure I didn't missed step (or did I)?
I've tried many custom recovery but still get same result.
And I fellow the guide on this page on trueandroid (sorry for not able to post a link)
Is any one has same issue and please help me to flash.
Thanks

Why 2.8.4.0 and where did you find it? 2.8.6.0 is available for your device here.

Tried but still no work.
And just thought of one thing, do I need to unlock BL before install custom recovery?
But I found on another post, i9500 intl Exynos is unlocked already.....

Solved by flashing a modified file by Xialuo in China forum, thanks pal !!

[Q] No Recovery Mode [Solved]

Hello Everyone,
I'm facing some challenging issue for few hours now and now I'm asking for your kind assistance.
Device: Samsung Galaxy Note 3 LTE (HLTE \ SM-N9005 \ N9005XXUGB0D3).
The device warranty was over this week so I've decided to try Cyanogenmod on it after the device received OTA update to Android 5.0 which I didn't like much due to its much different menus and user experience (Using Cyanogenmod on my tablet and I'm pleased with it).
So,
First step was to install ClockWork recovery but I'm failing each time.
There is a bug with Heimdall and this specific phone model which cause communication problems so it's not working.
Then I've tried ODIN instead but.
I get the "successfully Installed" message but when I go into recovery it is still the default one and not the ClockWork version.
Then I tried Root+Rom Manager via the phone itself.
Rom Manager tells me it installed the correct version of ClockWork *according to the wiki 6.0.4.8) but when I choose to go into recovery mode to verify it either by menually using the VOL\Home\Power combo or the button from inside the Rom Manager app it is still booting to the default recovery mode and not clockwork.
Now after breaking something (probably using different versions of odin or something) I can't get into recovery mode at all. I can see the blue text message of "going into recovery mode" for 1-2 seconds then I get into download mode screen instead.
And chance you can help me with my problem so I'll be able to install ClockWork recovery on this device?
Thanks!
EDIT:
Using root + app called [ROOT] Rashr - Flash Tool I've easily managed to install clockwork and then the Cynoagenmod\Gapps pack.

Help with rooting G906S Marshmallow 6.0.1 (tried CFire, TWRP and kingroot)

Hi, I've just recently switched over from iphone to android so I'm still new to the whole system. Anyway I've been trying to root my phone for the past 2 days to no avail so I'm at my wits end here. Before I start my phone is from korea which I don't know if whether or not impacts its ability to be rooted, I've done all the basics like enable USB debugging from dev mode, install samsung usb drivers, open ODIN in admin mode and allow MTP to computer. My Device details are below:
>Baseband version : G906SKSU1CPF1
>KERNEL : 3.10.40-8533426
>BUILD NUMBER : MMB29M.G906SKSU1CPF3
So anyway I first tried flashing using CF autoroot for sm-G906S with odin which while it said it was passed and was successful on pc it would be stuck on the samsung logo with a message at the top left that said :
>Recovery booting
>Recovery is not seandroid enforcing
>set warranty bit recovery
So then I tried flashing TWRP custom recovery and putting Super user zip in the internal storage which although got my phone back to working order still wouldnt let me root as the process required me to go to recovery mode from the fastboot mode after it was done flashing (I tried both with and without autoreboot), however once the flashing was done on fastboot I couldn't get to recovery mode no matter how long I held the Vol up/power/home button combination and when i tried it after rebooting it would show normal recovery mode hence there was no way to install the Super User. (Also attempted this with phils recovery)
I then tried to do the TWRP method using adb with command prompt however it would get stuck saying waiting for device when i tried to flash and needless to say kingroot also failed.
At this point as far I've gone through all the methods I could find for my particular device. Would greatly appreciate any insight or advice regarding this problem.
Thanks

start reading from here http://forum.xda-developers.com/gal...ner-thread-t2807639/post68725608#post68725608

G900F Restart loops

Hello everybody
I'm having this random issues with my Galaxy S5 G900F (Klte) with custom and stock roms.
Boot loops some times (System or Recovery)
Freezes at Logo or booting system or booting recovery.
Spontaneous reboots on recovery or system, at start or sometime later.
Some times it reach the PIN screen and sometimes not.
Some times it works for hours and some times it is rebooting all the time.
It happens from some days ago when I did a restore from custom rom backup.
It was taking a long time booting to system (more than 1 hour) so I removed the battery.
When I tried to start again the phone was not working well. (Just rebooting all the time)
I tried to solve it by flashing my previous used Stock Roms with Odin v3.09 with the result = <OSM> All threads completed. (succeed 1 / failed 0)
KitKat - G900FXXU1ANE2_G900FOXX1AND3_G900FXXU1ANE2_HOME
Lollipop - G900FXXU1BOJ1_G900FPHE1BOJ1_G900FXXU1BOJ1_HOME.tar
Marshmallow - G900FXXS1CPG9_G900FPHE1CPE3_G900FXXU1CPC9_HOME.tar
I also tried with custom Roms: RR pie, Bliss 12.7, Crdroid...
Sometimes I'm having errors while flashing custom Roms but sometimes everything be correct.
I also tried repairing, wiping and formatting every partition to ext2 and ext4
For some times I'm having problems wiping and formatting some partitions (randomly): unmount partition or no such file or directory...
I also tried with Original recovery and TWRP 2.x, 3.2 and 3.3 with the same results.
And also tried with and without SD and SIM
I don't know what more can i do. Some idea would be nice.
Aditional info:
My battery only have 7 months.

Is there any way to full clean all the phone partitions memory or any else?
Is Odin cleaning the phone during the installation of a new Rom or it is leaving some untouched?
How is posible that after install a Stock Rom with Odin with success end the mobile being unstable?

I'm doing a lot of tests because I don't understand the cause of my phone is unstable, but I'm learning a lot trough internet.
Some of the tests I'm doing are having this unespected results: (I could update this)
Boot loop entering to recovery mode
Cause: Unknow
Solution 1: Some times works better when I maintain pressed Vol+ and home until the TWRP screen si shown. (But not allways)
Solution 2: Some times I need to remove the battery, wait some minutes and try again after before entering in recovery. (Some times I need to repeat the proccess)
Boot loop entering to system
Cause: Partition system can't be repaired and shows "unable to mount partition" error on TWRP (May be the files or the partition is damaged or lost)
Solution: The only way I found is enter in recovery mode and clean system/dalvik/cache then install the Rom again. (Don't need to wipe data if it's the same Rom/Gapps)
Cause: Unknow
Solution: Sometimes the mobile enter to system after some tries

I also want to share some knowledge with the people that are looking for solution of similar problems and they found this post.
Some usefull guides I found: (I could update this)
A nice guide about Odin: https://pakfones.com/what-is-odin-and-how-to-use-full-guide/
What about nand erase on odin?: https://www.droid views.com/nand-erase-odin-samsung-firmware/
A nice program to get 4 part firmwares (SamFirm): https://samfirmtool.com/samfirm-v0-5-0 (The guide in the same site. )
Nothing new but , how to flash 4 parts firmware: https://rootsamsung.com/flash-samsung-stock-firmware-4-files
How to extract PIT from 4 Part firmwares (Easy way): https://www.droid views.com/extract-samsung-pit-file-from-firmware/#Extract_Samsung_PIT_File_from_Samsung_Firmware
Backup EFS/NV_data (Manual): https://forum.xda-developers.com/showthread.php?t=2737448
Something new, What is Combination Firmware?: https://combinationfile.us/what-is-samsung-combination-file-firmware/
Remove the space on URLS between droid and views.com
I don't see any diference between 1 part and 4 part firmware.
I think the Combination Firmware is only a little versión of Android (not much useful to fix nothing)
The same tools inside Combination are also on Development options in every Rom.
All credits of the guides/programs to their creators/maintainers. (I've only collected it here)

I will edit this post to not spaming the forum with the news.
Testing 4 parts Firmware obtained from SamFirm:
AP_G900FXXU1CRA2_CL12884729_QB16534923_REV00_user_low_ship_MULTI_CERT.tar.md5
BL_G900FXXU1CRA2_CL12884729_QB16534923_REV00_user_low_ship_MULTI_CERT.tar.md5
CP_G900FXXU1CQK3_CL12557498_QB15704233_REV00_user_low_ship_MULTI_CERT.tar.md5
CSC_PHE_G900FPHE1CRB1_CL12989714_QB16755881_REV00_user_low_ship_MULTI_CERT.tar.md5
But nothing really special, the phone continues restarting.
Testing 4 parts Firmware + PIT + re-partition + NAND Erase All
Nothing new, same reboot problems booting system.
At this point I have less reboots entering in recovery mode but:
Sometimes i have errors when I install custom Rom (E1001: Failed to update system image. and Error:7)
Stock roms boot loops everytime while booting system. (1 Part Firmware, 4 parts, with or without NAND Erase and PIT)
Custom roms like Bliss 12.7 works some times but without gapps.
I can't install Gapps now because errors / freezes at recovery.
Since the latest Stock Firmware installation I have more problems:
Black screen after Samsung logo.
More dificulties to enter on Recovery
Cannot solved by flashing any Stock Firmware.
Hardware buttons are good, and is not problem of overheats. (Works bad also in a cool state)
Going to SAT next monday.