The Phone is turning off while connecting to wifi - Asus ZenFone Max Pro M1 Questions & Answers

This problem is arising after installation of custom roms
Stock roms its fine and working correctly.
But when i install any custom rom, During the setup process its works great but, once i reboot the device the problem starts.
Some roms may not boot up.Some roms boot up but when wifi tries to automatically connect the phone turns off. I need to long press power button in order to turn on the device. This loop is continuing until i turn off the router.
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I tried resseting the device , flashing fastboot rom and then custom roms but, the problem still exists

anyone please reply!!!!!!!!!!!!!!

Please reply for this if anyone knows the fix. I am facing this problem.

I'm also facing that problem on custom rom. There is no solution till now, so i was back to stock.

I have stock ROM 058 and I noticed the phone sometimes restarts while reconnecting cellular network after airplane mode. Not sure if it is related.

Please reply if anyone got fix for this problem.

....??.??

Try flashing the backed up vendor partition from the stock ROM TWRP backup

You guys need to flash the decrypt.zip needed for each specified android version without it WiFi, Bluetooth and some other things cause problems.

Same problem, has anyone found a solution? I can't use my mobile because of this

Got fixed after flashing new firmware(059) and currently no problem with custom roms and working smoothly. Give it a try.

I had this problem earlier. I uninstalled Magisk from my phone completely ,now no more problem with wifi. I think it is a problem with magisk. Not with custom roms

Do any of you guys have Jio internet? (fiber)

I have faced same issue on Pixel Experience pie and also network instability.
Use Havoc OS of ArrowOS
---------- Post added at 05:46 PM ---------- Previous post was at 05:43 PM ----------
CHGR1999 said:
Got fixed after flashing new firmware(059) and currently no problem with custom roms and working smoothly. Give it a try.
Click to expand...
Click to collapse
Flash ROM with 060 base that would be better. Which ROM you use and and recommend as daily driver

Preformerr said:
Do any of you guys have Jio internet? (fiber)
Click to expand...
Click to collapse
U must be using jio fiber and facing this issue only when u connect to Jio router right ?

naitik2012 said:
U must be using jio fiber and facing this issue only when u connect to Jio router right ?
Click to expand...
Click to collapse
That's right. I'm changing it now, do you have the same issue?

Preformerr said:
That's right. I'm changing it now, do you have the same issue?
Click to expand...
Click to collapse
Lol... yep bro
Everything was working normally and den suddenly this issue started...when i connect my mobile to jio fiber my phone switches off automatically....i have to forcefully turn it on (press power button for 30 sec)... no issues on my office wifi and neighbors wifi...i tht there is something wrong in Kernel or ROM so i tried everything but no luck...only thing worked for me was stock ROM....in meantime i ordered tikona wifi router and connected it to jio router now no issue... and luckily now m getting full 100mbps download/upload speed on my Asus Max Pro M1 (before it was 75 Mbps download/upload).....
tips to get full advantage of 100 Mbps speed >
1. obviously u need internet connection with 100 Mbps or above speed.
2. Change channel width to 40hz in router configuration then enable channel bonding for 2.4 Ghz freq (search on google)..
Thanks

naitik2012 said:
Lol... yep bro
Everything was working normally and den suddenly this issue started...when i connect my mobile to jio fiber my phone switches off automatically....i have to forcefully turn it on (press power button for 30 sec)... no issues on my office wifi and neighbors wifi...i tht there is something wrong in Kernel or ROM so i tried everything but no luck...only thing worked for me was stock ROM....in meantime i ordered tikona wifi router and connected it to jio router now no issue... and luckily now m getting full 100mbps download/upload speed on my Asus Max Pro M1 (before it was 75 Mbps download/upload).....
tips to get full advantage of 100 Mbps speed >
1. obviously u need internet connection with 100 Mbps or above speed.
2. Change channel width to 40hz in router configuration then enable channel bonding for 2.4 Ghz freq (search on google)..
Thanks
Click to expand...
Click to collapse
Almost the same story here! I tried several ROMs and only the stock one worked without any errors. I gave the mobile to my techie friend who figured it out for me (after I finished wasting lots of my precious grey matter for a month). Hopefully the research we did will be beneficial to all the other Jio Fiber users.
I got the mobile late October for my birthday but I still can't use it. The installation of my new internet connection (Ion fiber) will be finished tomorrow so I'm excited to finally use my new phone!
Thanks for the configuration advice; I'll look it up as I'm not very tech savvy.

Uninstall magisk
It worked for me
Magisk is causing the problem
Sometimes u have to sacrifice

Related

WiFi Issue

Flashed 3-669-SuperScaryStable on top of nightly cm7 212. Subsequently, WiFi could not maintain a lock. The phone would find the wifi network get a lock for a moment and immediately lose the lock. Get a lock, lose the lock. . . . Settings I tried were Scary and smartass governors 245mhz - 1.2ghz
Anyway, flashed nightly 220 (back to regular cm7 kernel)-- back to wifi working fine.
Maybe I looked too quickly but all I saw in the development thread pertained to Super Scary not working with sense roms.
Hmmmm.
sdk234 said:
Flashed 3-669-SuperScaryStable on top of nightly cm7 212. Subsequently, WiFi could not maintain a lock. The phone would find the wifi network get a lock for a moment and immediately lose the lock. Get a lock, lose the lock. . . . Settings I tried were Scary and smartass governors 245mhz - 1.2ghz
Anyway, flashed nightly 220 (back to regular cm7 kernel)-- back to wifi working fine.
Maybe I looked too quickly but all I saw in the development thread pertained to Super Scary not working with sense roms.
Hmmmm.
Click to expand...
Click to collapse
Download wifi analyzer from market and figure out what is conflicting with your wireless router.
toastcfh's stock kernel is considered the most stable kernel because it's been tested and proven to work with everything time and time again.
However, I have no problems with wifi on Scary's kernel. Again, I'm not saying there are no issues because when I'm at work I do have issues but I have wifi issues on my laptop with the wifi here as well, they have way too many APs broadcasting on the same channel (4-5 APs for channel 3, 4-5 APs for channel 7, 4-5 APs for channel 11) so I seriously doubt it's a problem with the kernel but more a problem with your local wifi router configuration.
Run wifi analyzer and it will answer this question.
Am I right to assume that I should run the test you recommend after flashing Scary and recreating the problem - cause on Toastcfh's kernel there is no problem connecting to that router whatsoever?
sdk234 said:
Am I right to assume that I should run the test you recommend after flashing Scary and recreating the problem - cause on Toastcfh's kernel there is no problem connecting to that router whatsoever?
Click to expand...
Click to collapse
You can run the same test on toast's kernel.
Well, you know, maybe it's just all about the goofy phone itself after all.
Trying to do the test (following a reboot) I'm just about sitting on top of the router (that I've confirmed is working) with wifi enabled on the shift and all I'm getting is "not in range." Can't get the wifi icon to even display at the moment.
Thanks for the help.
sdk234 said:
Well, you know, maybe it's just all about the goofy phone itself after all.
Trying to do the test (following a reboot) I'm just about sitting on top of the router (that I've confirmed is working) with wifi enabled on the shift and all I'm getting is "not in range." Can't get the wifi icon to even display at the moment.
Thanks for the help.
Click to expand...
Click to collapse
Open ROM manager and run fix permissions and reboot again, then turn on wifi and open wifi analyzer again.
VICODAN said:
Open ROM manager and run fix permissions and reboot again, then turn on wifi and open wifi analyzer again.
Click to expand...
Click to collapse
Did it. But seems that I've got the same problem. Connects for a little bit and then disconnects. It just can't maintain the wifi link. Doesn't stay up long enough to even get a screen shot of wifi analyzer.
Maybe I should try another nightly, stable cm7 or sense?
sdk234 said:
Did it. But seems that I've got the same problem. Connects for a little bit and then disconnects. It just can't maintain the wifi link. Doesn't stay up long enough to even get a screen shot of wifi analyzer.
Maybe I should try another nightly, stable cm7 or sense?
Click to expand...
Click to collapse
You can't take screenshots on wifi analyzer. Just analyze it yourself. How many APs are broadcasting on the same channel as you? More than 1? Change the channel.
There are two and they don't overlap. One is centered over channel 6, the other (weaker one) centered over channel 11. But the problem is that the parabolas that show the signal strength disappear pretty quickly and the wifi indicator at the top of the phone just disappears. What do you think about the possibility that I should switch to a different nightly or sense?
sdk234 said:
There are two and they don't overlap. One is centered over channel 6, the other (weaker one) centered over channel 11. But the problem is that the parabolas that show the signal strength disappear pretty quickly and the wifi indicator at the top of the phone just disappears. What do you think about the possibility that I should switch to a different nightly or sense?
Click to expand...
Click to collapse
Ignore the APs disappearing. It sounds like your router is either a piece of junk or misconfigured.
Try configuring the wireless radio on channel 1.
Shouldn't be a piece of junk. wasn't that cheap ;-)
Works fine with my computer anyway.
sdk234 said:
Shouldn't be a piece of junk. wasn't that cheap ;-)
Works fine with my computer anyway.
Click to expand...
Click to collapse
That means nothing.
What kind of router is it? Manufacturer / Model number?
Also please remove ScaryKernel from the title of this thread since we have proven this problem happens on toastcfh's kernel as well.
VICODAN said:
That means nothing.
What kind of router is it? Manufacturer / Model number?
Also please remove ScaryKernel from the title of this thread since we have proven this problem happens on toastcfh's kernel as well.
Click to expand...
Click to collapse
Netgear N600 WNDR3400
Why's it meaningless that I have no trouble with WIFI on laptop?
sdk234 said:
Netgear N600 WNDR3400
Why's it meaningless that I have no trouble with WIFI on laptop?
Click to expand...
Click to collapse
Netgear sucks. Do yourself a favor and go buy a Linksys WRT610N or one of the new models.
Other than that all I can tell you is switch your wireless channel.
It's not a problem with the phone or the kernel, it's the router.
VICODAN said:
Netgear sucks. Do yourself a favor and go buy a Linksys WRT610N or one of the new models.
Other than that all I can tell you is switch your wireless channel.
It's not a problem with the phone or the kernel, it's the router.
Click to expand...
Click to collapse
Ok - I'll try switching the channel first ;-)
Also - going to find some other routers to test the phone against
Thanks for all the time spent troubleshooting here
Ok - Vic - here's the end of the story, since you've been good enough to work with me on this - -
Installed and ran an app called "FXR WiFi fix and rescue" from the market. Didn't appear to help.
So, restored nandroid of Mik 1.6 and WIFI WORKS PERFECTLY once again. Strong, stable, consistent lock on the Netgear signal (and another close-by router as well.) Problem solved for me.
Not going to make any rash accusations about what the culprit may be which caused wifi to fail for me on cm7.
I'm happy I've confirmed it's not the phone.
Maybe my shift just likes MikRoms and Supreme Sense and was punishing me for experimenting!!
sdk234 said:
Ok - Vic - here's the end of the story, since you've been good enough to work with me on this - -
Installed and ran an app called "FXR WiFi fix and rescue" from the market. Didn't appear to help.
So, restored nandroid of Mik 1.6 and WIFI WORKS PERFECTLY once again. Strong, stable, consistent lock on the Netgear signal (and another close-by router as well.) Problem solved for me.
Not going to make any rash accusations about what the culprit may be which caused wifi to fail for me on cm7.
I'm happy I've confirmed it's not the phone.
Maybe my shift just likes MikRoms and Supreme Sense and was punishing me for experimenting!!
Click to expand...
Click to collapse
Glad to hear it but I'm still wondering.. did you even TRY changing the channel?
I get 20+Mbps over Wifi on 2.4ghz.
I was planning to try changing the channel, but you know what -- just happened to restore Mik 1.6 first.
And the result was dramatic. On the nightly CM7 the graphs displayed on wifi analyzer weren't stable at all. Even when the parabola's appeared for a few moments, their height was shifting up and down. It was like the signal strength was fluctuating.
On Mik's rom the height of the parabolas is higher than I saw before and just stays put.
sdk234 said:
I was planning to try changing the channel, but you know what -- just happened to restore Mik 1.6 first.
And the result was dramatic. On the nightly CM7 the graphs displayed on wifi analyzer weren't stable at all. Even when the parabola's appeared for a few moments, their height was shifting up and down. It was like the signal strength was fluctuating.
On Mik's rom the height of the parabolas is higher than I saw before and just stays put.
Click to expand...
Click to collapse
Did you do a wipe data/factory reset when flashing CM7? Did you wipe dalvik? Did you wipe cache? Did you wipe battery stats? Did you flash the latest CM7 nightly and then right after that did you flash google apps 828 and new talk?
Not wiping properly before flashing a new rom could cause weird issues like that.
VICODAN said:
Did you do a wipe data/factory reset when flashing CM7? Did you wipe dalvik? Did you wipe cache? Did you wipe battery stats? Did you flash the latest CM7 nightly and then right after that did you flash google apps 828 and new talk?
Not wiping properly before flashing a new rom could cause weird issues like that.
Click to expand...
Click to collapse
Yes-wiped that & more - prboy trained me well
After wiping according to steps on mik's forum (& battery stats) , flashed cm7 and google apps and talk just as you instructed
Sent from my PG06100 using xda premium

[Q] WiFi issues on almost all ROMs - MB525 red lens

Hi All,
Since I got my DEFY I have WiFi problems. This issue only exists when WiFI has WPA/WPA2 PSK authorisation.
It is going like this: I connect over the wifi. Then connection works fine, I am able to browse www, check the emails etc, and after few seconds, minutes the connection stops working but still exist. I try to reconnect several times. Defy shows that is connected but nothing works fine. Internet apps or Market gives a message like the time is up, connection lost. I have to forget the conection in settings or reset device to get it working properly, but not for long.
And the thing is that there is only ONE ROM that works fine with WiFi on my DEFY. This is Cyanogenmod-7.1.0-RC1. Other ROMs have same issues. Doesn't mater if it is Cyanogen mod 7.1 stable or any MIUI or MS2Ginger. I tried almost all roms but nothing helped. So I had to go back to CM7.1.0-RC1.
Do you know what should I do to make WiFi working fine on other roms?
greetings,
Gregory
p.s.
Please, just don't tell me that I should change authorisation on WiFi router. This is not a solution for me, because I use WiFi in a lot different places.
Same problem
Hi,
I have the same problem with my Defy since a few months, no solutions!
I have the *EXACT* same issue. Was about to roll back to stock and send it in for repair, glad I found your post! I'll install the ROM you suggested and keep hoping this gets fixed
just fixed my wifi issue for the second time. If there are to many remembered networks no more wifi. You can turn it on but it cant find any. delete all remembered networks and back on line. that is the only conectivity problem I have ever had after months of cm7
wilson1813 said:
just fixed my wifi issue for the second time. If there are to many remembered networks no more wifi. You can turn it on but it cant find any. delete all remembered networks and back on line. that is the only conectivity problem I have ever had after months of cm7
Click to expand...
Click to collapse
I think that's a different problem than we're having. It is finding the network just fine (and connecting) in our case. It's just that internet connectivity refuses to work after a few minutes, forcing us to disconnect-reconnect to get it working again
@OP: Thanks a lot! The ROM you mentioned does indeed not have this problem. It's not as stable as some of the more recent roms though, think I'll still be forced to revert to stock
i had exactly that problem with my first defy, no solution man, i send it to warranty and they give me other
maybe changing the regulatory domain channels from 11 to 14 could help. this option is hidden by default, you have to enable it: change the value of 'ro.debuggable' from 0 to 1 in /system/bootmenu/config/default.prop, save and reboot. after that, the regulatory domain setting will be shown in settings/wireless/wifi/advanced. simply change it to 14 channels.
Sent from my MB526 using xda premium
@OP: Apparently the issue still occurs on the version you mentioned as well...just happens less often.
cdlq456 said:
i had exactly that problem with my first defy, no solution man, i send it to warranty and they give me other
Click to expand...
Click to collapse
Hmm..weird thing is, I never had this issue on the stock ROM
zakoo2 said:
maybe changing the regulatory domain channels from 11 to 14 could help. this option is hidden by default, you have to enable it: change the value of 'ro.debuggable' from 0 to 1 in /system/bootmenu/config/default.prop, save and reboot. after that, the regulatory domain setting will be shown in settings/wireless/wifi/advanced. simply change it to 14 channels.
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Thank you for the suggestion! Just tried this, didn't resolve the issue sadly
I'm looking into rolling back to a stock Froyo rom but the information is scattered all over the place, I'm having a hard time figuring out if it's possible, and if so, how ;/
Anyone have any more ideas? ;/
darkdevil1 said:
Anyone have any more ideas? ;/
Click to expand...
Click to collapse
OK, maybe I just passed the signpost but... do you still have the problem if you set your "select network" setting to 3G only?
I ask because (and it may be different on my phone as I am USA, stock ROM with wifi calling) if you go into the INFO menu > phone information > set preferred network type, mine toggles between three radio preferences: "GSM only" (when wifi is active), "GSM auto (prl)" and -- if I set for 3G Only, "WCDMA only".
I have noticed that when "select network" setting is at automatic (or 2G only) it often has trouble transitioning from cell to wifi. And, when wifi is an issue, I find that "GSM auto (prl)" has been selected (which on my USA phone prevents wifi connection). However, it seems to have no issue whatsoever transitioning from "WCDMA only" (3G only) to "GSM only", which on my phone then allows wifi connection. Again, this is a wifi calling phone so may be different.
Yep, same here BUT ! I get root browser, found my build.prop and change wifi chanells first time for 14 and it didnt help so i try other and my wifi works in 100% with 13 chanells. Try it
This is a widely know problem, many people are affected more or less. I'm also having nerve-blowing times with wifi sucking all over... Stock Froyo (and now Cyanogen 7.2) seems to be a bit more stable, sometimes everything is fine for a few hours, all downloads go lightning fast - and then suddenly things are screwed up. I tried a lot of MIUI releases as I like it most. MIUI seemed the most problematic so far. I don't know what is the cause, new stock Motorola Gingerbread ROM versions also have this issue (except one I think - look it up in the forum).
Agree, bothering with the router is not a solution. My Nokia E51, my EeePC, my girlfriend's Omnia and Lifebook - all work perfectly with all the four routers we use frequently. Not a single glitch - everything is stable and nice, except Defy.
I don't think is a hardware problem with certain devices, it seems more to do with the way Defy handles wireless connections.
Anyway, it's frustrating but CM7.2 and CEE Froyo gives a bit better experience than others.
masspl said:
Yep, same here BUT ! I get root browser, found my build.prop and change wifi chanells first time for 14 and it didnt help so i try other and my wifi works in 100% with 13 chanells. Try it
Click to expand...
Click to collapse
You mean changing ro.wifichannels to 13?.
Don't do that, my phone wouldn't boot any more. Had to restore nandroid BU...
darkdevil1 said:
You mean changing ro.wifichannels to 13?.
Don't do that, my phone wouldn't boot any more. Had to restore nandroid BU...
Click to expand...
Click to collapse
I didnt know that... it help me but i see for other its bad
Mine boots fine...
VTomi1975 said:
Mine boots fine...
Click to expand...
Click to collapse
Strange, perhaps I messed up something else accidentally then. Has it resolved your problem?
My mate do same think but he leave space after "13" and there was some problems with boot after this ;/ So maybe u do same ... Im sory if i make some problem
darkdevil1 said:
Strange, perhaps I messed up something else accidentally then. Has it resolved your problem?
Click to expand...
Click to collapse
No, problem still persists. Sometimes it works flawlessly for hours. Then... suddenly screwed :S In some cases a "switch wifi on/off" workout can help but not always.
VTomi1975 said:
No, problem still persist. Sometimes it works flawlessly for hours. Then... suddenly screwed :S In some cases a "switch wifi on/off" workout can help but not always.
Click to expand...
Click to collapse
Same. Thanks for your response.
I've rolled back to 2.2 and no Wifi issues so far. I'll just stay on this stock ROM.
darkdevil1 said:
Same. Thanks for your response.
I've rolled back to 2.2 and no Wifi issues so far. I'll just stay on this stock ROM.
Click to expand...
Click to collapse
Which Froyo version do you use? A few times this wifi-bug occured also under Froyo. I'm thinking about going back myself, as Froyo is the only acceptable release to record hiccups-free videos

[HELP] Jio 4g. Horrible Connection.

The data connection on my phone goes away after every few mins. It's very unstable. Also all of a sudden there's no VOLTE. I've tried all APN methods. I was previously on Mokee, and the problem started. I went back to miui, the problem was solved for the evening. But it started again.
If anyone has any solution. Please help. I cant even call using 4gVoice app. I want a permanent solution .
All help is appreciated. Thanks in Advance!
It's jio's problem
Hopefully will get resolved till march
a5tra said:
It's jio's problem
Hopefully will get resolved till march
Click to expand...
Click to collapse
The sim worked fine on k6 power.
I solved it by going back to miui and then flashing mokee.
Yet, it's surprising that it happens so randomly.
Probably something to do with default APN.
WickedCool19 said:
The data connection on my phone goes away after every few mins. It's very unstable. Also all of a sudden there's no VOLTE. I've tried all APN methods. I was previously on Mokee, and the problem started. I went back to miui, the problem was solved for the evening. But it started again.
If anyone has any solution. Please help. I cant even call using 4gVoice app. I want a permanent solution .
All help is appreciated. Thanks in Advance!
Click to expand...
Click to collapse
Even I'm facing the same problem with my Redmi 3s prime. It happened with resurrection remix rom and I flashed miui again. But didn't work. I tried different methods, but none worked. One of my friend said that jio by default takes band 5 for better coverage which trades-off with connection speed(low internet speed). One way is, to switch the band from 5 to 3 or 40, which might improve speed. This can be done in something called "service mode" in the phone. He had LG G3 and used some secret key in phone dialler to access service mode. That key however didn't work with Redmi 3s prime. I'm still searching for one.
arceuss said:
Even I'm facing the same problem with my Redmi 3s prime. It happened with resurrection remix rom and I flashed miui again. But didn't work. I tried different methods, but none worked. One of my friend said that jio by default takes band 5 for better coverage which trades-off with connection speed(low internet speed). One way is, to switch the band from 5 to 3 or 40, which might improve speed. This can be done in something called "service mode" in the phone. He had LG G3 and used some secret key in phone dialler to access service mode. That key however didn't work with Redmi 3s prime. I'm still searching for one.
Click to expand...
Click to collapse
Thanks for the reply.
Though it's more about VOLTE, it's not working. Even if it does work with a certain rom, it goes away after a few reboots.
FYI: I don't have fluctuating connection anymore.
Though I really wish that there was a proper solution for VOLTE
WickedCool19 said:
The sim worked fine on k6 power.
I solved it by going back to miui and then flashing mokee.
Yet, it's surprising that it happens so randomly.
Probably something to do with default APN.
Click to expand...
Click to collapse
Turn off volte if it still persists
I'm using multi ROM
Working fine
a5tra said:
Turn off volte if it still persists
I'm using multi ROM
Working fine
Click to expand...
Click to collapse
But I do need volte.
For now I'm on the latest LOS, and everything is working fine for now.
A small tip to anyone reading this, never greenify any Qualcomm, and codeaurora service.
Bad news - u are not alone. Look at this: http://en.miui.com/thread-320293-1-1.html
hacel said:
Bad news - u are not alone. Look at this: http://en.miui.com/thread-320293-1-1.html
Click to expand...
Click to collapse
Thanks for the reply.
Though, for now, the problem is solved.
I'm on the latest lineage OS, and have hardly faced signal drops. Volte too seems to be working fine now.
Miui seems to lock our bands at 800mhz which hinders the net speed, switching to 3g/2g in low network areas, to maximize network coverage.
That can be tackled, if you use an app called 'network signal guru' , to lock the bands to a higher frequency, for preference to Internet. Requires root though.
Hope that helps you.

What do you do? 5ghz Wi-Fi issue...

Hi Guys,
I just got my Prime Day Essential set up and after updating to the latest Android 8.1.0 build with the July patches I'm one of the lucky ones with the 5ghz Wi-Fi issue, where when I connect to a 5ghz Wi-Fi, the connection and speed starts throttling down to no bandwidth at all. My workaround has been using the slower 2.4ghz SSID. I also have the issue where the Play Store download sometimes waits forever to download in the queue.
What do you guys do with this issue? Flash to Android P? Something else with you router?
I really don't think it's my router because obviously all other devices in the house are working flawlessly... Appreciate ANY help... Thank you!
ProFragger said:
Hi Guys,
I just got my Prime Day Essential set up and after updating to the latest Android 8.1.0 build with the July patches I'm one of the lucky ones with the 5ghz Wi-Fi issue, where when I connect to a 5ghz Wi-Fi, the connection and speed starts throttling down to no bandwidth at all. My workaround has been using the slower 2.4ghz SSID. I also have the issue where the Play Store download sometimes waits forever to download in the queue.
What do you guys do with this issue? Flash to Android P? Something else with you router?
I really don't think it's my router because obviously all other devices in the house are working flawlessly... Appreciate ANY help... Thank you!
Click to expand...
Click to collapse
Welcome to the "club"... :silly:
I've been searching for a solution to this issue since I got the PH-1 about 3 weeks ago. Here I read your post, and I just did a test to disappoint myself once again with the issue... but... it doesn't seem to be happening anymore?!??
I am running AOSiP (8.1 w/ July security patch) with the latest Neutrino Fornax kernel (important because it has the latest Android P WLAN drivers, same as the Essential P B3 066 stock release). I am going to see if I can determine what might have fixed it, but I've been running this setup for a week and it originally had the problem.
What I would suggest:
- Don't spend much time diagnosing your router, all the changes suggested in these forums didn't change anything for me at least (YMMV). As you said, all other devices in your home are working fine (same here).
- Don't install P to resolve this issue. I clean flashed the Essential P Beta Release, and the problem was still there. In fact it seems to have been worse, with PS download stopping completely with a message "Waiting for WiFi".
- Try a different kernel. Try the latest ElementalX kernel (3.0.6). I believe it has the updated WLAN drivers as well since it supports Android P. I don't believe the Neutrino kernel works on stock.
- Check your PlayStore version, I think mine was updated recently (11.0.50-all[0] [PR] 206665793)
I am going to look into this more, and if I find a definitive "this is what fixed it" I will post it here. Good luck...
This is issue is not present for me on 9.0 further the speed difference between 2.4 and 5 isn't really world eg being on 2.4 is still faster than most broadband connections. This is seems to be a google security patch issue on 8.1 and likely will be fixed in the next patch. When the latest 9.0 beta came out it seemed to go away. So it seems they know how to fix it.
I have no problem either, latest android P, rooted with rey darkroom kernel
Edit, can u guys connect to any wifi? There seems to be an issue, after flashing various ota's, stock images, or treble gsi's that disable wifi and Bluetooth and the only way i have found to fix them, isfor android P at least) to flash a july 8.1 images (flashall. Bat) then flash android P to fix wifi and Bluetooth issues.
jdgesmlls said:
Welcome to the "club"... :silly:
I've been searching for a solution to this issue since I got the PH-1 about 3 weeks ago. Here I read your post, and I just did a test to disappoint myself once again with the issue... but... it doesn't seem to be happening anymore?!??
I am running AOSiP (8.1 w/ July security patch) with the latest Neutrino Fornax kernel (important because it has the latest Android P WLAN drivers, same as the Essential P B3 066 stock release). I am going to see if I can determine what might have fixed it, but I've been running this setup for a week and it originally had the problem.
What I would suggest:
- Don't spend much time diagnosing your router, all the changes suggested in these forums didn't change anything for me at least (YMMV). As you said, all other devices in your home are working fine (same here).
- Don't install P to resolve this issue. I clean flashed the Essential P Beta Release, and the problem was still there. In fact it seems to have been worse, with PS download stopping completely with a message "Waiting for WiFi".
- Try a different kernel. Try the latest ElementalX kernel (3.0.6). I believe it has the updated WLAN drivers as well since it supports Android P. I don't believe the Neutrino kernel works on stock.
- Check your PlayStore version, I think mine was updated recently (11.0.50-all[0] [PR] 206665793)
I am going to look into this more, and if I find a definitive "this is what fixed it" I will post it here. Good luck...
Click to expand...
Click to collapse
Thanks for the warm welcome, my friend and even more so, thank you so much for your very detailed post and what you've done to remedy.
I assume messing with the kernel and etc will require Bootloader unlocking and rooting, right? I haven't rooted a phone since the V20, just been opting out of that life for secure payment methods, stable battery and just general ease of moving from phone to phone like I do ?.
What I did last night... Could be a fluke, could be placebo, however, changing the channels on my 5ghz network, rebooting the router, I've been connected to the 5ghz network with my Essential for about 12 hours now with no throttling. I'm not sure if it was in fact the channel change or rebooting the router that cleared things up? Albeit, the signal strength on this network on this phone is the lowest I have seen between the Note 8, HTC U12+, iPhone 7 Plus...
Please keep the research up, I will too, this problem really has no documented solution yet.
autosurgeon said:
This is issue is not present for me on 9.0 further the speed difference between 2.4 and 5 isn't really world eg being on 2.4 is still faster than most broadband connections. This is seems to be a google security patch issue on 8.1 and likely will be fixed in the next patch. When the latest 9.0 beta came out it seemed to go away. So it seems they know how to fix it.
Click to expand...
Click to collapse
Thank you bud, good to hear you're not seeing the issue... But honestly, it does exist for some of us. I really hope it's the issue with the July patch, that'll make things so much easier! Although, I disagree 5ghz is much faster for me than my 2.4ghz network...
jacksummers said:
I have no problem either, latest android P, rooted with rey darkroom kernel
Edit, can u guys connect to any wifi? There seems to be an issue, after flashing various ota's, stock images, or treble gsi's that disable wifi and Bluetooth and the only way i have found to fix them, isfor android P at least) to flash a july 8.1 images (flashall. Bat) then flash android P to fix wifi and Bluetooth issues.
Click to expand...
Click to collapse
Thanks for reporting, good Sir. Yes, I can connect to any network, just low signal strength and the choking issue I had before my router change. Bluetooth seems stable with my smart watch, though the watch seems to be draining the battery faster on this phone... Who knows man ??
You might have noticed I am on the P beta. Also have you run actual wifi speed tests or are we taking seat of the pants feelings?
autosurgeon said:
You might have noticed I am on the P beta. Also have you run actual wifi speed tests or are we taking seat of the pants feelings?
Click to expand...
Click to collapse
Hey bud, yes good to see promising reports from P beta... Hoping the bad WiFi is resolved for the ones who get it.
And yes, speed tested, repeatedly. Sadly, Essential's top speeds are way worse than the Note 8, HTC U12+, iPhone 7 Plus... I'm talking almost 100mbps less ?...
For whatever reason though, the choking of the bandwidth down to unusual issue has gone away. Not sure if rebooting the Router did that? WiFi signal is also the worst I have seen on this phone out of all the others mentioned...
I appreciate you sharing your experience.
ProFragger said:
Hey bud, yes good to see promising reports from P beta... Hoping the bad WiFi is resolved for the ones who get it.
And yes, speed tested, repeatedly. Sadly, Essential's top speeds are way worse than the Note 8, HTC U12+, iPhone 7 Plus... I'm talking almost 100mbps less ...
For whatever reason though, the choking of the bandwidth down to unusual issue has gone away. Not sure if rebooting the Router did that? WiFi signal is also the worst I have seen on this phone out of all the others mentioned...
I appreciate you sharing your experience.
Click to expand...
Click to collapse
So your downloads are not as fast as your other devices but you no longer see the downloads slow to a crawl (~100KB/s)? My downloads are not slowing to a crawl either any longer. Something must have been updated from a Google perspective because nothing I changed could explain the issue just going away... :fingers-crossed...
jdgesmlls said:
So your downloads are not as fast as your other devices but you no longer see the downloads slow to a crawl (~100KB/s)? My downloads are not slowing to a crawl either any longer. Something must have been updated from a Google perspective because nothing I changed could explain the issue just going away... :fingers-crossed...
Click to expand...
Click to collapse
Haha well my good luck didn't last too long, I fried my data, playing with Substratum, on a rooted system :'(... but here's to hoping the 5ghz good luck continues! Don't you love it when "magic" is the answer !?
All jokes aside, my WiFi signal and radio is still the weakest hardware I have EVER seen on ANY device!
ProFragger said:
Haha well my good luck didn't last too long, I fried my data, playing with Substratum, on a rooted system :'(... but here's to hoping the 5ghz good luck continues! Don't you love it when "magic" is the answer !?
All jokes aside, my WiFi signal and radio is still the weakest hardware I have EVER seen on ANY device!
Click to expand...
Click to collapse
I just had a issue with Substratum as well... what do you mean "fried my data"? I was able to recover my system using the Substratum rescue, copied to the cache/ partition and flash in TWRP. Did you already re-flash everything?
jdgesmlls said:
I just had a issue with Substratum as well... what do you mean "fried my data"? I was able to recover my system using the Substratum rescue, copied to the cache/ partition and flash in TWRP. Did you already re-flash everything?
Click to expand...
Click to collapse
Hey bud, yeah, I was playing with Substratum on a NON-rooted, bootloader locked device with Andromeda. So when I had the bootloop, I had no custom recovery in place to flash the rescue zip. :'(
So I "fried" my data, beyond retrievable, I mean. I was surprised that the Essential stock recovery didn't even have a way to install update.zip? That way us non-rooted folks can always save our rescue zips on our computers and see if there was a way to sideload the zip through the stock recovery... Oh well, either there is a way, or I didn't know and couldn't get enough help in time in the middle of the night. I needed my phone working in the AM...
I have had 7.01 when I got the phone yesterday. Went to 9 same day and I can't watch a video. Speed test shows 1.2 M down 2.3 up. I checked other devices and they are showing 70 down and 10 up
My Essential didn't even see my 5Ghz network on 8.1, but I just updated to 9, and now everything is good. Getting 72mbit on a 75mbit connection, too.
On 9.0 rooted with ex kernel on 5ghz ac 866mbit no issues at all... I get 40 megabytes a sec on my wifi.. I have 65 megabytes a sec with my current isp. I why straight to 9.0 phone was on 7.1.2 when I got it a few days ago.
Sent from my PH-1 using Tapatalk
I just did the see 5th security patch update while already on P. My ph1 has never been able to connect to my Xfinity 5ghz channel. Actually, it will sometimes connect, but says 'connected (no internet)' then drips connection. So it's ALWys had trouble with that. My HTC 10 does not, my V30 does not, my M7 does not.
Since the 9/5 update, even my 2.4ghz channel is crazy slow. I get about 3mbps down with my case on. Took off case and get 15mbps. Verified thru multiple tests. My V30 gets 63mbps on same 2.4 channel.
Anyone have this situation? I can't seem to find any further settings in wifi settings to try to see if a setting is wrong.
Does the ph1 just have the worst wifi radio ever? Or is there somewhere in setting that I can change something that I just haven't found? Much thanks.
Stock. Not rooted, no custom kernel,etc. I've been hesitant to root this device because of the A/B slots confusing me a little and just don't have the time currently to really dig into it.
I've the same problem with 5GHz wifi... Connection is very poor. Automatically reconnect to 2,4GHz network. My iPhone 6s didn't problem with this. I don't know, how fix it.
Xfinity routers suck. That said my PH1 connects just fine to my Linksys 5ghz AC channel. Works all over my house and only switched to the 2.4 GHz when I go outside.
autosurgeon said:
Xfinity routers suck. That said my PH1 connects just fine to my Linksys 5ghz AC channel. Works all over my house and only switched to the 2.4 GHz when I go outside.
Click to expand...
Click to collapse
What are you guys using to confirm throughput? I'll be testing my replacement (recording audio issue with the one I purchased) when it gets in.
I do file transfers from my PC to my phone and back again and measure the time vs size of file. Over the local network obviously.
autosurgeon said:
Xfinity routers suck. That said my PH1 connects just fine to my Linksys 5ghz AC channel. Works all over my house and only switched to the 2.4 GHz when I go outside.
Click to expand...
Click to collapse
I've Tp-Link Archer C1200 with 5GHz and wifi AC. Other devices like a MacBook Air, iPhone 6s and ZTE Axon 7 works perfect with this router on 5GHz and AC speed. I think, that problem is with my Essential Phone.

Very Slow Wifi - barely useable

I bought this phone for my gf it has a GLOBAL version 10.3.5.0 stable, everything is nice with the phone but it has one problem with home's wifi.. its very f****** slow like literally downloading apps or loading pages at 100kbs.. data works perfectly, back in our other home and all public her wifi works perfectly. I would assume that is the router problem, but on my phone (onePlus6 and all other family member phones) that wifi works perfectly with no hiccups.. I have tried to factory reset rn7 via recovery, no luck.. maybe u have an idea what could be causing that? Also if i turn off wifi and turning back on, that wifi doesnt show up immediately, but it locate other nearby wifi, the home's wifi shows up like after 30sec, and sometimes it disappear and shows up again. Phone BL is locked it just few weeks old, i bought it new. I guess installing custom rom should help, but my GF wouldn't like that cuz she afraid to loose camera quality, so im kind of with locked hands for custom, also one guy in reddit said that switching to custom didn't change situation.. damn the phone is really nice. First time in I have such a problem:/
It downloading instagram for 2hours... Its insane, browsed all the web, some people having exactly same problem, and can't resolve it they having different model of xiaomi redmi notes. I just can't believe it that nothing can be done in this case when it works on public wifi, at my family home, at friends, but just not at her house...
Any help would be appreciated..
Im loosing my nerves on it ://
Is your router dual band? If so, look for your wifi ID in your list and then look for the name of your wifi with "5G" after it. Try connecting to that. That's the 5 ghz band. Supposedly i's not great for going thru thick steel walls, concrete, etc, but I never experienced any of those issues.
meistr91 said:
Any help would be appreciated..
Im loosing my nerves on it ://
Click to expand...
Click to collapse
Did you try my suggestion?
DelphinusMinor said:
Did you try my suggestion?
Click to expand...
Click to collapse
This first thing what i have checked, wifi is not dual. Everything got sorted after few times restarting router thanks for reply!

Categories

Resources