Related
I foud at least how to get root with no downgrade of firmware.
STEP 1 - Unlock Developer Options
Unlock developer Options:
If you have already unlocked it then ok, otherwise go to phone’s SETTINGS >> ABOUT >> and tap 3-4 times on BUILD NUMBER to unlock Developer options.
STEP 2 - Enable USB debugging
It is very inportant to root your device. Go to SETTINGS >> DEVELOPER OPTONS >> enable USB DEBUGGING
STEP 3 - Download Required Files
Atachment in POST
STEP 4 - Xperia Z2/Z3 Rooting Process
1. Install KINGROOT and open it. Click ROOT button
2. Wait to complete to 100%. If you’ll see a Chinese blue button - confirm it.
3. After complete it’ll show you the menu. Don’t open it.
4. Close KINGROOT
5. Install BUSYBOX and open it. In the Busybox interface, complete the installation process. It’ll show you a successful message after completion.
6. Close BUSYBOX
7. Install ZX RECOVERY and open it. Now tap on Install Recovery button.
8 Phone will restart in to recovery
9. In Recovery install SUPERSU from downloaded pack.
10. Rebot
11. Enjoy
You can uninstall KINGROOT
it worked thanks!
Same here
http://forum.xda-developers.com/xperia-z2/general/root-t3108230
Is that metod works on latest build .28 for Z2?
Sent From My D6503 With Tapatalk
Allek84 said:
Is that metod works on latest build .28 for Z2?
Sent From My D6503 With Tapatalk
Click to expand...
Click to collapse
Yes working! I use thie metod
Wysłane z mojego D6503 przy użyciu Tapatalka
Thread already exists here: http://forum.xda-developers.com/xperia-z2/general/root-t3108230
No need for duplicate thread.
Thread closed.
Forum moderator,
matt4321
Return your 5X to stock with TWRP
I put together a few files to make it easy to return your phone to stock for OTA updates or just for starting over Fresh
First you need to already have TWRP on your phone
New Version here >> kiwi_twrp_5-14_recovery.img
To use this backup you need to already have at least one TWRP backup on your ext-sdcard (to create the directory's)
now download Your choice from below and place it on your ext-sdcard in
TWRP/BACKUPS/your serial no/file you downloaded Unzipped here
KIW-L24.B130 >> Twrp_Back_to_Stock_with _Stock_Recovery.zip
Or >> KIW-L24 B140 Stock + Stock recovery Backup
Or the >>2016-04-07_KIW-L24C567B151_Stock_Plus_Stock_Recovery.zip
Android 6.0.1 MM update is here !!!
Please Note you Cannot update to MM with the TWRP backup
You must flash the Full firmware update
2016-07-10--16-37-28_KIW-L24C567B331_Stock_Plus_Stock_Recovery.7z
KIW-L24-B331-Stock.Rom.zip
The Full Firmware is here >> http://download-c.huawei.com/download/downloadCenter?downloadId=84725&version=338949&siteCode=us-h
Use New TWRP here >> kiwi_twrp_5-14_recovery.img
Now simply reboot to recovery / choose restore / choose the file you copied to the SD / make sure all the files are selected for restore. This will replace TWRP with Stock Recovery
If you want a complete Wipe, go to wipe / swipe to factory reset, before you reboot
Note: if you must relock the bootloader for whatever reason fastboot oem lock should do the trick ( I never tested it and don't plan to )
Congratulations, you just returned your phone to New out of the box stock
If you only need the stock Recovery (you can flash it with TWRP/Install/Image or rooted users can use Flashify )
I uploaded them here >>
KIW-L24 b130 Stock Recovery here >> https://www.androidfilehost.com/?fid=24421527759882507
KIW-L24 b140 Stock Recovery here >> https://www.androidfilehost.com/?w=files&flid=50306
KIW-L24 B151 Stock recovery here >> https://www.androidfilehost.com/?w=files&flid=53729
KIW-L24 B331 Stock recovery here >> https://www.androidfilehost.com/?w=files&flid=78778
I uploaded the OTA B140 for the KIW-L24 here >> https://www.androidfilehost.com/?fid=24421527759882720
And Here is the Honor_5X_Firmware_KIW-L24_Android_5.1_EMUI_3.1_C567B151_United_States_Channel-Others.zip
Thanks To @Gilbert_Sarip I have uploaded the much Smaller (123mb B140 OTA update.zip) here >> https://www.androidfilehost.com/?fid=24421527759886482
KIW-L21 Users use the dload folder method here >> http://forum.xda-developers.com/honor-5x/how-to/kiw-l21-c432b130-uk-revert-package-t3368480
or the TWRP backup is available here >> https://www.androidfilehost.com/?fid=24545070682210513
KIW-L22 Twrp backup can be found here >> http://forum.xda-developers.com/honor-5x/how-to/l22-twrp-backup-t3325678
or in my 5x repository here >> https://www.androidfilehost.com/?fid=24438995911971573
KII-L21 B130 - GR5 Twrp backup is here >> http://download1500.mediafire.com/u3iuf44obfmg/d0w9ikeno78tl6t/GR5+TWRP+backup_KII-L21C185B130.rar
Thanks to @Under World Warning: remove or uncheck oeminfo before flashing
Flashing oeminfo can brick your phone
Reserved
clsA said:
Return your 5X to stock with TWRP
I put together a few files to make it easy to return your phone to stock for OTA updates or just for starting over Fresh
First you need to already have TWRP on your phone
To use this backup you need to already have at least one TWRP backup on your ext-sdcard (to create the directory's)
now download my Twrp_Back_to_Stock_with _Stock_Recovery.zip and place it on your ext-sdcard in
TWRP/BACKUPS/your serial no/Twrp_Back_to_Stock_with _Stock_Recovery
Now simply reboot to recovery / choose restore / choose Twrp_Back_to_Stock_with _Stock_Recovery / make sure all the files are selected for restore. This will replace TWRP with Stock Recovery
If you want a complete Wipe, go to wipe / swipe to factory reset, before you reboot
Note: if you must relock the bootloader for whatever reason fastboot oem lock should do the trick ( I never tested it and don't plan to )
Congratulations, you just returned your phone to New out of the box stock
If you only need the B130 stock Recovery (you can flash it with TWRP/Install/Image) I uploaded it here >> https://www.androidfilehost.com/?fid=24421527759882507
I just uploaded the latest OTA B140 for the KIW-L24 here >> https://www.androidfilehost.com/?fid=24421527759882720
Click to expand...
Click to collapse
Thanks for posting the 140 update.
@clsA ... Thanks for the help you gave. Loaded 130 recovery and updated to 140. Now putting apps and things back how they should be.
does this procedure work for the EU version l21 ?
drjpnt said:
does this procedure work for the EU version l21 ?
Click to expand...
Click to collapse
No this is only tested on the L24 US version
clsA said:
No this is only tested on the L24 US version
Click to expand...
Click to collapse
what should i do on l21 to return to stock version?
drjpnt said:
what should i do on l21 to return to stock version?
Click to expand...
Click to collapse
you'll have to download this and extract the recovery.img and flash it to remove TWRP ( you can use Flashify or TWRP to flash it)
https://www.androidfilehost.com/?fid=24411628330025755
Then you can use the UPDATE.APP to do a full recovery
https://www.androidfilehost.com/?fid=24411628330025756
Instructions:
Code:
SD Card Upgrade Guide
Prepare: 1. Capacity of battery of Honor mobile phone is more than 30%.
2. SD card has more than 4G free storage volume, just make sure it is enough for
the upgrade software and back up date. Back up: Make sure that SD card is in the
mobile phone, go to “Tools”=>”Backup”=>”New Backup”=>select all the data you
want to back up =>”Backup”=>Set password=>”Next”.
The data is going to be backed up into SD card.
Download upgrade software:
Download the corresponding upgrade software from “support page/Downloads”
into computer, then extract the file to get a “.APP” file.
Make sure that SD card is in the mobile phone, then connect the mobile phone
to the computer with USB cable and copy the “.APP” file into the folder “dload” of SD card,
if there is no “dload” folder in the SD card, please create one first.
Updating Go to “Settings”=>”Updater”=>”Local update”=>Select the “.APP” file you have downloaded.
Then system will start updating. Restore Go to “Tools”=>”Backup”=>select the file
you backed up before=>input the password=>”Restore”.
thankyou. will try this
Thanks for the B140 image. With that and the stock recovery image, I was able to switch back to stock recovery, update to B140, and enable encryption.
What is the procedure to update to B140 on a rooted Device with debloat?
Sent from my KIW-L24 using Tapatalk
eruji said:
What is the procedure to update to B140 on a rooted Device with debloat?
Sent from my KIW-L24 using Tapatalk
Click to expand...
Click to collapse
follow page 1 of this thread and then install the OTA
clsA said:
follow page 1 of this thread and then install the OTA
Click to expand...
Click to collapse
after the manual update to B140
its reboot and can't unlock screen...its doesn't recognized my PIN.
Then need to do a hard factory reset.
rogconnect said:
after the manual update to B140
its reboot and can't unlock screen...its doesn't recognized my PIN.
Then need to do a hard factory reset.
Click to expand...
Click to collapse
your the first to report it ...you have the L24 ?
clsA said:
your the first to report it ...you have the L24 ?
Click to expand...
Click to collapse
Lol..... yes
if not how to update manually.
I returned to stock with your TWRP
then setup account and pin lockscreen. Didn't do that fingerprint id. Then did that update. After that finished on stock recovery, then unabled to unlock screen with my usual PIN.
Now doing that local restore on backup app. And see how its go. I have Android Wear so not sure it will recovered all my watchfaces.
내 LG G Flex 2 H959 사용 tapatalk에서 전송
rogconnect said:
Lol..... yes
if not how to update manually.
I returned to stock with your TWRP
then setup account and pin lockscreen. Didn't do that fingerprint id. Then did that update. After that finished on stock recovery, then unabled to unlock screen with my usual PIN.
Now doing that local restore on backup app. And see how its go. I have Android Wear so not sure it will recovered all my watchfaces.
내 LG G Flex 2 H959 사용 tapatalk에서 전송
Click to expand...
Click to collapse
My pin and fingerprint both survived both the TWRP restore and the B140 update. And I gained 2 new apps.
Sent from my KIW-L24 using Tapatalk
clsA said:
you'll have to download this and extract the recovery.img and flash it to remove TWRP ( you can use Flashify or TWRP to flash it)
https://www.androidfilehost.com/?fid=24411628330025755
Then you can use the UPDATE.APP to do a full recovery
https://www.androidfilehost.com/?fid=24411628330025756
Instructions:
Code:
SD Card Upgrade Guide
Prepare: 1. Capacity of battery of Honor mobile phone is more than 30%.
2. SD card has more than 4G free storage volume, just make sure it is enough for
the upgrade software and back up date. Back up: Make sure that SD card is in the
mobile phone, go to “Tools”=>”Backup”=>”New Backup”=>select all the data you
want to back up =>”Backup”=>Set password=>”Next”.
The data is going to be backed up into SD card.
Download upgrade software:
Download the corresponding upgrade software from “support page/Downloads”
into computer, then extract the file to get a “.APP” file.
Make sure that SD card is in the mobile phone, then connect the mobile phone
to the computer with USB cable and copy the “.APP” file into the folder “dload” of SD card,
if there is no “dload” folder in the SD card, please create one first.
Updating Go to “Settings”=>”Updater”=>”Local update”=>Select the “.APP” file you have downloaded.
Then system will start updating. Restore Go to “Tools”=>”Backup”=>select the file
you backed up before=>input the password=>”Restore”.
Click to expand...
Click to collapse
'' system update failed, shutdown system" Why? I have kiw-L21
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
?
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
kamileoo92 said:
?
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
Click to expand...
Click to collapse
did you follow the instructions ?
clsA said:
did you follow the instructions ?
Click to expand...
Click to collapse
Yes. I am doing everything according to instructions. When phone they are restarting and it is fitting into recovers supposedly he is installing something for moments, but later this mistake is shown what higher I wrote.
Wysłane z mojego KIW-L21 przy użyciu Tapatalka
Hi, I recently updated my L31 device to build B161 by putting the UPDATE.APP file in the dload folder on my SD card, then typing the service code in the dialer app. Everything seemed fine except now I can't use Android Pay (I just get a "Google isn't able to confirm that your device or the software running on it is Android compatible. You may need to unroot your device." error).
I have never rooted the device or unlocked the bootloader and I have tried deleting the data on Android Pay. Does anyone know how I can fix it without rooting or doing a full factory reset?
Thanks
George-N said:
Hi, I recently updated my L31 device to build B161 by putting the UPDATE.APP file in the dload folder on my SD card, then typing the service code in the dialer app. Everything seemed fine except now I can't use Android Pay (I just get a "Google isn't able to confirm that your device or the software running on it is Android compatible. You may need to unroot your device." error).
I have never rooted the device or unlocked the bootloader and I have tried deleting the data on Android Pay. Does anyone know how I can fix it without rooting or doing a full factory reset?
Thanks
Click to expand...
Click to collapse
You will need a original rom with OTA updates because it thinks that you have a custom rom on phone
Wysłane z mojego SM-A510F przy użyciu Tapatalka
OK thanks, so if I reflash B130 (my original rom version) using the same method Android Pay should start working again? Is there some way of flashing a full image and having Android Pay work?
I am curios if you can reflash firmware B130 after you flashed B161...
I tried flashing the B130 package but the installation failed with an incompatible update error.
Yeap, that confirm the myth... Once you flashed B160/B161 you can not return to any previously firmware (B130/B131, B150/B151)...
This afternoon the SafetyNet helper app started reporting 'CTS profile match: true' (has been reporting false up until today) so I assume Google have updated something and Android pay will work again!
To flash a previous versione you necessary need to unlock bootloader and change oeminfo (you can also put the same oeminfo C432) and after you can easilly flash every past firmware (based on C432 region/vendor in this case).
Hello everyone!
We are pushing out the incremental roll-out of OxygenOS 5.0, our first official Android O OTA update for the OnePlus 3 and 3T. Here are some of the highlights of this build:
System
Update to Android O (8.0)
Added Parallel Apps
Added Picture in Picture
Added Auto-fill
Added Smart text selection
New Quick Settings design
Updated security patch to September
Launcher
Added notification dots
New app folder design
Now able to upload photos directly to Shot on OnePlus
For those who were on previous versions for OnePlus 3 and 3T, we appreciate your active feedback and attempts to reach out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.
As always, this OTA will be incremental. The OTA will reach a small percentage of users today, and we'll begin a broader rollout in a few days.
Your feedback is appreciated. We may not always be able to respond to every comment in the forums, but please be assured that we take your comments and feedback seriously. Hope you enjoy and let us know how you feel about the update in the comments below.
Never Settle :fingers-crossed:
>>>> Confused on How to take logs, look here
Downloads:
OOS 5.0 Full Zip: Official
Unified TWRP By @eng.stk
SuperSU | Magisk
Warning: Do not flash partial update OTAs (under 1 GB) on a modified device! If you want to use partial OTAs, you must first flash a full OTA that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full OTA zips in recovery.
Installation Methods
Before we start:-
This method is only for the OnePlus 3T.
Follow the steps correctly otherwise you may brick your device. I am not responsible for any damage to your device, please ensure that your device is at least 60% charged to prevent the accidental shutdown in-between the update process.
Download the necessary files from the post above and follow as below
PS: Dirty flash is fine if you are running a previous OOS version or any rom based on OOS, else if you come from a custom rom Clean Flash is recommended.
********************* For Stock Non Rooted Users with Stock Recovery *****************
1. Download the appropriate OTA from above link and place it in the root folder.
2. Navigate to Settings > System Updates > Settings Icon > Local Upgrade & Select the OTA File
3. Once selected system would prompt upgrade now
4. Select upgrade now and system would reboot in stock recovery and flash the OTA
5. The installer would itself flash the OTA and reboot the device.
The Device will reboot and your OnePlus 3T is now running on the latest OxygenOS 5.0 firmware & OS based on 8.0 Oreo.
PS: The first boot may take some time so keep calm and wait for it to boot.
* After flash is successful go back to recovery and a wipe of cache is recommended.
* If in any case flash is unsuccessful the system would prompt you to download the full 1.4GB zip.
* Download that and follow the same process as above.
************************ For Rooted Users with TWRP Recovery ************************
Download the required files from Post 2
Once you have downloaded all the required files on you device, please follow as below :good:
1. Update TWRP to the ones provided above by flashing the downloaded image :good:
2. Reboot Recovery and Take a Nandroid of your existing ROM :good:
(Note: Nandroid from 3.0.4-1 cant be restored on older version or and visa-versa)
3. Wipe > Advance Wipe > Select Dalvik & Cache > Swipe to Wipe :good:
4. Install Menu > Select OOS 5.0 Full Rom Zip > Swipe to Flash :good:
5. Flash the provided SuperSU/Magisk to maintain root (Optional)
6. Wipe Dalvik & Cache
7. Reboot System and Enjoy OxygenOS 5.0 Firmware & Latest OOS based on 8.0 Oreo :fingers-crossed:
The first boot may take some time as the system would boot twice due to flash of supersu so keep calm :fingers-crossed:
PS: Do not flash partial update OTAs (under 1 GB) on a modified device! If you want to use partial OTAs, you must first flash a full OTA that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing one of the above full OTA zips in recovery.
here we go! nice :good:
Yeah got the ota notification 20 mins ago
Is the alert slider now fixed?
Seansmit17 said:
Yeah got the ota notification 20 mins ago
Click to expand...
Click to collapse
None here yet, could u upload the OTA zip?
OOS 3.5.3 to 3.5.4 incremental OTA @Funk Wizard
OnePlus3TOxygen_28_OTA_027-029_patch_1612131737_17e7161d2b234949.zip
eng.stk said:
OOS 3.5.4 OTA @Funk Wizard
OnePlus3TOxygen_28_OTA_027-029_patch_1612131737_17e7161d2b234949.zip
Click to expand...
Click to collapse
Thanks buddy :good:
So did the T mobile issue is fixed now. Please let me know as I am on ATT and soon porting to T mobile
eng.stk said:
OOS 3.5.4 OTA @Funk Wizard
OnePlus3TOxygen_28_OTA_027-029_patch_1612131737_17e7161d2b234949.zip
Click to expand...
Click to collapse
OTA's wont install unless you have stock recovery, right?
Tried to install it through TWRP directly and the install ended with an ERROR: 7. Same thing happened while installing it from Settings -> System update -> Local upgrade, since it brings you to the same recovery/TWRP which ends up with ERROR 7 also
I guess in order to install this update and get back TWRP and ROOT, I have to:
1. flash stock recovery;
2. boot into system;
3. install this OTA update from Settings -> System update -> Local upgrade;
4. re-flash TWRP while in fastboot through ADB;
5. flash latest superSU in TWRP.
jemeljsh said:
OTA's wont install unless you have stock recovery, right?
Tried to install it through TWRP directly and the install ended with an ERROR: 7. Same thing happened while installing it from Settings -> System update -> Local upgrade, since it brings you to the same recovery/TWRP which ends up with ERROR 7 also
I guess in order to install this update and get back TWRP and ROOT, I have to:
1. flash stock recovery;
2. boot into system;
3. install this OTA update from Settings -> System update -> Local upgrade;
4. re-flash TWRP while in fastboot through ADB;
5. flash latest superSU in TWRP.
Click to expand...
Click to collapse
I have successfully installed the OTA from TWRP and updated the installation process on the OP
I don't see update yet. Is it normal?
Wysłane z mojego SM-T815 przy użyciu Tapatalka
Funk Wizard said:
I have successfully installed the OTA from TWRP and updated the installation process on the OP
Click to expand...
Click to collapse
Well, for some reason I get that Error 7. Even with stock recovery the install fails. I have no idea why..
Edit. Its (reason for Error 7) gotta be the root.
jemeljsh said:
Well, for some reason I get that Error 7. Even with stock recovery the install fails. I have no idea why..
Edit. Its (reason for Error 7) gotta be the root.
Click to expand...
Click to collapse
indeed the reason for error 7 is root.
You have to overwrite the system partition by flashing full 3.5.3 full rom followed by 3.5.4 OTA or just dirty flash 3.5.4 full zip.
Both Installation methods are mentioned on the OP with download links.
masi0 said:
I don't see update yet. Is it normal?
Wysłane z mojego SM-T815 przy użyciu Tapatalka
Click to expand...
Click to collapse
The roll-out is incremental, you can find the zips on the OP if you want to flash it manually along with the instructions already tested by me.
Is there a method of flashing this zip on stock unrooted rom?
Wysłane z mojego SM-T815 przy użyciu Tapatalka
Do you recommend? Better in something that 3.5.3?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Does Flashfire work with OnePlus 3T? Did anyone try it?
masi0 said:
Is there a method of flashing this zip on stock unrooted rom?
Wysłane z mojego SM-T815 przy użyciu Tapatalka
Click to expand...
Click to collapse
Yes, i have modified the update process for you, look here
liver20 said:
Do you recommend? Better in something that 3.5.3?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Click to expand...
Click to collapse
I always recommend to stay on the latest if official, you can check the changelog in the OP
Thanks to "OkCug32" from "4pda.ru" for this custom recovery Rom!
Flash only with twrp recovery.
-For having Google play services download from meizu app store "GMS Installer" (search "google" is the icon that has a "g" with a yellow,red,blue,green background)
Download:
6.1.0.1A_twrp
https://mega.nz/#!W4lCgQhL!dBHuh3wYwSLuAi1Ott5I3D_K1uuO7HF9DiF_A2AOzlM
6.2.0.0G_twrp
https://yadi.sk/d/WgwPncfG3REuGP
Download
6.1.0.0G_twrp
https://mega.nz/#!O08ymDKI!HAqC2oEQJLokruB9DHTI_L9f0VhfjeqZv-8tu2CCD3U
Well done. Everything works great. Thank you very much @disnomia
Wysłane z mojego MX4 przy użyciu Tapatalka
@disnomia Can you tell me, how to prepare stock Flyme to flashing in TWRP? Is it very dificult?
Wysłane z mojego MX4 przy użyciu Tapatalka
wojted said:
@disnomia Can you tell me, how to prepare stock Flyme to flashing in TWRP? Is it very dificult?
Wysłane z mojego MX4 przy użyciu Tapatalka
Click to expand...
Click to collapse
I use the tutorial from "nikk3d"
http://4pda.ru/forum/index.php?showtopic=689760&st=580#entry43526907
Open the update.zip and from the root of the archive delete:
-logo.img
-uboot.img
Now From "Meta-inf" folder delete:
-imei.dat
-machine_match
and finally from "Meta_inf" ->com->google->android->updater-script delete the lines from the first attachment and save it.
The updater-script must look like the second attachment.
Hello, can I flash the 6G version on my 5A MX4 ?
EDIT
I tried to flash both the G and the A versions with TWRP 2.8.6.0, flashing was successful but i was stuck in a bootloop, even after a factory reset... What should I do to avoid this ?
Thanks in advance
Falnhir said:
Hello, can I flash the 6G version on my 5A MX4 ?
EDIT
I tried to flash both the G and the A versions with TWRP 2.8.6.0, flashing was successful but i was stuck in a bootloop, even after a factory reset... What should I do to avoid this ?
Thanks in advance
Click to expand...
Click to collapse
Try twrp 3.0.2.0 maybe is one possible cause of bootloop
flash the new recovery img and try again
https://mega.nz/#!i0MWFJbQ!3NhLrhyLhUhnPwwDlkJzgcvBrnTNNkab30xJb4F-I2M
disnomia said:
Try twrp 3.0.2.0 maybe is one possible cause of bootloop
flash the new recovery img and try again
Click to expand...
Click to collapse
Will my TWRP 2.8.6.0 backup be valid or should I make a new one?
Falnhir said:
Will my TWRP 2.8.6.0 backup be valid or should I make a new one?
Click to expand...
Click to collapse
I think it will but not 100% sure, make for sure a new backup with the new recovery image before flashing the new roms
disnomia said:
I think it will but not 100% sure, make for sure a new backup with the new recovery image before flashing the new roms
Click to expand...
Click to collapse
Thank you for your help Disnomia but I am gonna need you once more ^^"
So it didn't work. With both roms I ended up stucked at the meizu logo, not even the spinning flyme logo.
I am gonna explain what I did so please tell me what I did wrong ^^'
1- backup
2- factory reset
3- install the new rom. There was no error message
4- clear cache
5- reboot, with installing SuperSU
6- stuck at meizu logo
7- restore my backup
8- restore successful, no problem.
If you see a mistake somewhere please tell me ^^'
Thanks in advance
Falnhir said:
Thank you for your help Disnomia but I am gonna need you once more ^^"
So it didn't work. With both roms I ended up stucked at the meizu logo, not even the spinning flyme logo.
I am gonna explain what I did so please tell me what I did wrong ^^'
1- backup
2- factory reset
3- install the new rom. There was no error message
4- clear cache
5- reboot, with installing SuperSU
6- stuck at meizu logo
7- restore my backup
8- restore successful, no problem.
If you see a mistake somewhere please tell me ^^'
Thanks in advance
Click to expand...
Click to collapse
Ok get in the recovery wipe dalvik ,system,cache,data
install rom and dont flash super su now
reboot and if you manage to get in
reboot to recovery again and flash super su
This super su I use:
https://mega.nz/#!y5Uk2I4C!T_P7D9KYVSalLz5auMCkCrQafrsACa3DvX7moBq4JaA
disnomia said:
Ok get in the recovery wipe dalvik ,system,cache,data
install rom and dont flash super su now
reboot and if you manage to get in
reboot to recovery again and flash super su
Click to expand...
Click to collapse
please don't blame me but it didnt worked
i did exactely what you said, i flashed the 6A file you linked and when it was finished it said "are you sure you want to reboot? No OS installed". So is the update file corrupted? or is my phone stupid?
thanks again for your help disnomia
Falnhir said:
please don't blame me but it didnt worked
i did exactely what you said, i flashed the 6A file you linked and when it was finished it said "are you sure you want to reboot? No OS installed". So is the update file corrupted? or is my phone stupid?
thanks again for your help disnomia [/QUOTE
Try to download again the rom seems not installed maybe corrupted
It happens also with 6.1.0.0G ?
Click to expand...
Click to collapse
disnomia said:
Try to download again the rom seems not installed maybe corrupted
It happens also with 6.1.0.0G ?
Click to expand...
Click to collapse
Didn't tried the G yet since I am on a 5A right now... It's wierd because I took a look into the update.zip and every file seems to be here... I don't understand why I can't install it... I will try it tomorrow and make my report but if it doesn't work I'll deal with it until I by a new phone ^^
Thanks for your help
Falnhir said:
Didn't tried the G yet since I am on a 5A right now... It's wierd because I took a look into the update.zip and every file seems to be here... I don't understand why I can't install it... I will try it tomorrow and make my report but if it doesn't work I'll deal with it until I by a new phone ^^
Thanks for your help
Click to expand...
Click to collapse
Try also the G version it doesnt matter if you are on A version right now
wipe everything and install it as a new rom
6.1.0.1A is chinese version
6.1.0.0G is international version
disnomia said:
Try also the G version it doesnt matter if you are on A version right now
wipe everything and install it as a new rom
6.1.0.1A is chinese version
6.1.0.0G is international version
Click to expand...
Click to collapse
Yeah I knew that but I wasn't sure if the device verification was removed
The G didn't work, none of the roms worked because it couldn't install the system partition....
I give up and I'll wait for the LG V30 to be available in France...
Thank you so much for your help and your answers disnomia so sorry I couldn't make it work ?
This may sound silly but my phone is already on flyme os 6.1.0.OG. Will flashing this zip with flashify enable me to install other custom ROMs (cynogenmod, mokee)? I have exhausted every effort to unlock the MX4's bootloader because it seems impossible for me to downgrade the international device to 4.2.8.2A to use the apk unlock. I'm also trying my hardest to avoid bricking my device. Any advice would be very much appreciated. Thanks
weichieh007 said:
This may sound silly but my phone is already on flyme os 6.1.0.OG. Will flashing this zip with flashify enable me to install other custom ROMs (cynogenmod, mokee)? I have exhausted every effort to unlock the MX4's bootloader because it seems impossible for me to downgrade the international device to 4.2.8.2A to use the apk unlock. I'm also trying my hardest to avoid bricking my device. Any advice would be very much appreciated. Thanks
Click to expand...
Click to collapse
This roms is only for flashing with custom recovery(twrp), unlocked bootloader.
Trying this roms on official rom it will brick your device.
If you try to downgrade from official 6.1.0.0G to 4.2.8.2A from flashify better try from stock recovery.
disnomia said:
This roms is only for flashing with custom recovery(twrp), unlocked bootloader.
Trying this roms on official rom it will brick your device.
If you try to downgrade from official 6.1.0.0G to 4.2.8.2A from flashify better try from stock recovery.
Click to expand...
Click to collapse
Yeah, I tried using stock recovery to downgrade to 4.2.8.2A but I always get 'Firmware Corrupt' no matter how many times I re-download from different websites. I've even tried going to 4.0.4I before going to 4.2.8.2A but I even got the same 'Firmware Corrupt' message in the stock recovery for the 404I downgrade process.
I've tried these urls:
http://download.meizu.com/Firmware/Flyme/MX4/4.2.8.2/cn/20150422020016/09eb1341/update.zip
http://downloads.meizufans.eu/mx4/firmware/stable/4.2.8.2/a/update.zip
Is this because international version mx4 can't be upgrade or downgrade to 'A' version? Or Android Lolipop roms can't be downgrade to kitkat roms? Please share your thoughts. Thanks
weichieh007 said:
Yeah, I tried using stock recovery to downgrade to 4.2.8.2A but I always get 'Firmware Corrupt' no matter how many times I re-download from different websites. I've even tried going to 4.0.4I before going to 4.2.8.2A but I even got the same 'Firmware Corrupt' message in the stock recovery for the 404I downgrade process.
I've tried these urls:
http://download.meizu.com/Firmware/Flyme/MX4/4.2.8.2/cn/20150422020016/09eb1341/update.zip
http://downloads.meizufans.eu/mx4/firmware/stable/4.2.8.2/a/update.zip
Is this because international version mx4 can't be upgrade or downgrade to 'A' version? Or Android Lolipop roms can't be downgrade to kitkat roms? Please share your thoughts. Thanks
Click to expand...
Click to collapse
Try to downgrade to 4.0.4i and then upgrade to 4.2.8.2A and hope this will be the trick.
https://downloads.meizufans.org/mx4/firmware/stable/4.0.4/i/